I've set up Apache on my Fedora 12 machine and have got it working on my internal IP (localhost/192.168.0.15) however, when I try to access it through my external IP I am taken to my router login page.
What do I need to do to route my external IP to my internal static IP of 192.168.0.15?
I am trying to setup Fedira 12 Linux Apache in my home network. I am able to access the hosted website from inside my home network without any problem. I am facing the problem to access it from outside. At the moment i have connected the Apache directly to DSL modem for testing purpose. I was reading "The ISP may have blocked the HTTP port 80. So check it by connecting the Apache directly to DSL modem." The temporary network connections for testing purpose are as follows..
DSL modem (SIEMENS Speed Stream 4200)-->Fedora 12/Linux Apache Server
I am even unable to PING the real ip (IP for DSL modem).(Firefox gave me error message "Connection Timed out) I have tried to ping it from the internet.I can PING the DSL from Apache without any problem.
1. Why i am even unable to PING the real IP of DSL modem at my home.?
2. Is it possible to run/setup Apache by using this type of DSL modem?
3. DSL modem has real IP. DSL MODEM assigns private IP (192.168.x.x) to Apache. So when a http request form the internet came to DSL modem on port 80, will it forward to Apache automatically.? or i have to made any changes.(I can not see anything in DSL modem to change/modify), OR do I have to use another DSL MODEM/Equipment (router)? This setup is just temporary. The actual design is as follows
DSL MODEM(Speed Stream 4200)-->Fedora 12 Linux ROUTER--->Internal network with DNS/Apache Server
I would like to redirect a external IP to a internal IP, all done with Apache. Is that possible.
View 4 Replies View RelatedI am a complete newbie at web servers, so I installed Ubuntu Server and have a LAMP set up. I have gotten dynamic DNS to link to my domain, and that seems to be working. My domain is 6py7.com. If I try to access my domain from within my home network it links me to my router's main page (192.168.2.1). I have my server set up with a static ip at 192.168.2.100 and have port forwarding set up.
Is there something I missed with the setup of this? I can only access my domain if I use a network outside of my home network, but if I am within my home network the domain name links to the router.
On my Server I have an application running. I have the External IP address of the Server registered in DNS so users requiring access from outside the office can enter a full URL rather then an IP address.
How to I change my Apache config so that all traffic that comes into the server from the URL is put over https?
A week ago I purchased an VPS. The first few days I was having trouble to set up an outgoing connection on the VPS. Eventually it turned out to be some misconfiguration of the server where the VPS is hosted on.Since then I have installed the apache server, but I'm still not able to access the apache server from an external computer. I already have contacted the provider, but they haven't replied yet. To speed things up I was hoping someone could check my configuration to be sure nothing is wrong with it.To be sure I posted all configuration and information that I think would be important. Please contact me if you need more information.
View 2 Replies View RelatedI am trying to set up a home web server for my personal site using Ubuntu 11.04 and Apache. I have set up a user called www and given it FTP access to its home area (/home/www) using vsftpd. I then edited /etc/apache2/sites-available/default and set the DocumentRoot directive to /home/www. When I made a test index.html file in that directory it worked fine. Then I FTP'd to the server (as www) from another PC and uploaded the site files. Now when I try to access the site I get an error 403 (forbidden).Obviously I'm doing something wrong here but I'm not sure what. What should I do to fix this.
View 2 Replies View RelatedI am trying to use my external hard drive to store webpages and on the webpages it is uploaded to the folder. When i navigate to the address it says it is forbidden. I also noticed that it would not let me upload files to the folder it says i do not have permission. Can someone help me get passed the barriers. The hard drive is ntfs.
View 7 Replies View RelatedVanilla install of Karmic (64 bit) - would like to change the Apache doc root to point to /home/sam/www as it's my web development machine. (Default install is working fine)
Created copy of 'default' to 'mylocal' in '/etc/apache2/sites-available'
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /home/sam/www
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
<Directory /home/sam/www/>
Options Indexes FollowSymLinks MultiViews
AllowOverride None
Order allow,deny
allow from all
</Directory>
...
The permissions on the folder in my home dir:
Code:
sam@rocket:~$ ls -la ww*
total 16
drwxrwxrwx 2 sam sam 4096 2010-01-09 22:26 .
drwx------ 35 sam sam 12288 2010-01-09 22:11 ..
-rwxrwxrwx 1 sam sam 100 2010-01-09 22:27 index.html
sam@rocket:~$ pwd
/home/sam
sam@rocket:~$
The sites enabled set up:
Code:
root@rocket:/etc/apache2# ls -la sites-enabled/
total 8
drwxr-xr-x 2 root root 4096 2010-01-09 22:24 .
drwxr-xr-x 7 root root 4096 2009-12-20 00:22 ..
lrwxrwxrwx 1 root root 26 2010-01-09 22:24 mylocal -> ../sites-available/mylocal
But I still get:
"Forbidden
You don't have permission to access / on this server".
i use virtual hosts to develop several web applications. These are located in my home folder under /home/user/projects/project After a fresh installation, i always get a 403 forbidden error. After googling and reading on this forum, several solutions are mentioned for this problem. But i can hardly believe putting using a chmod 755 on my home folder is a correct solution. What is the correct way of doing things in this situation?
View 5 Replies View RelatedI want to automaticly set the group ownership of user home directories to a group that the user is not part of. This is so that Apache can be part of this group and can access user public HTML directory, but other users are not able to access in any way the files in the users home directory. What I have seen that works manually is adding the user and then changing the group for the home directory. But I want to automatically set this when the user account is created. WHat I see happening is that when /etc/skel is copied, it automatically sets the group and ownership of everything to the users default group and ownership. I've seen some suggestions on setting permissions, but these don't seem to work because it seems that users are able to cd into a directory and not list it, but if they know the file name they can access the file.
View 1 Replies View RelatedI and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
[code]...
I've set up a FTP server, but now I would also give the ability to users to access file through a web interface, like the ones you can find in many NAS.I there anyone that knows a software that do this? I can't find nothing useful.
View 5 Replies View RelatedI have a home network set up that includes windows xp and a local server. DNS resolution allows both machines to access the internet. I know this because firefox works on the xp machine, and yum works on the fedora machine.I can see the server index page through firefox by ip. I can't see it by url.
/etc/sysconfig/network settings:
NETWORKING=yes
HOSTNAME=fred.mycoachdomain.com
[code]....
I have my home network up and running. I can access my index file by the ip I gave to eth0 - 192.168.0.2
I put this same ip into etc/hosts:
192.168.0.2 localhost localhost.localdomain
One space separates the hostnames from the ip in /etc/hosts.
The hostname command returns: localhost.localdomain
I have /etc/resolv.conf configured the right way, so I can use my isp's DNS servers. I know this because yum works and I can ping anywhere by url. The next step is to learn to access the index file by url locally on my own network.
Does anyone know of a tutorial or site where I can learn how to monitor what sites people have been accessing on a network?
View 1 Replies View RelatedI am setting up Apache (Fedora 12) inside my home network. From inside my home network I access it without any problem. I need to set it up to access it from internet. I have the following questions. Here is temporary setup for testing purpose.
Internet-->ADSL modem (SEIMENS Speed Stream 4200)---> Apache (Fedora 12)
1. Do I have to do any kind of ports forwarding on ADSL modem. (There is no option to do port forwarding on Modem) May be I need different Model of Modem??
2. I tired to Ping my real IP for modem form another computer from internet. I am even unable to PING the ADSL 's real IP. Why it is that?
One of our Apache servers, version 2.2.3, is running three virtual hosts on it. However, while two are accessible, gray.mgh.harvard.edu, www.plastimatch.org, the third, cmrol.mgh.harvard.edu cannot be reached by any remote host.
I am at a loss as to why this is occurring. To that end, I am including the httpd.conf file as an attachment in the hopes someone can see what I missed, and help correct this issue.
I've a new USB 3.0 Hub card and plugged it into pcie1x. The chipset on this controller is a NEC uPD720200. I attached a HD to it but it wasn't recognized (but Windows does!).
I'm runnig archlinux (all updates) which shows the card/harddrive as (lsusb) Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub fdisk doesn't show the device.
How to access the HD?
I want to access files on my external harddrive through GNOME, beyond plugging it into my computer via USB I have no idea what to do next..I think it has something to do with a mount point or the 'mount' command...to summarise, my question is how can I access extern. HardD through GNOME?
View 4 Replies View RelatedI work for a company who has a really closed proxy configuration, and I think that only the port 80 is opened, but with a lot of blocked sites.
I guess that for other cases, like bank sites and others, they opened the 443 port too. But other ports are all closed.
I set up a linux server at home, and I need to access it with SSH. However, I can't access my server directly by its IP number,
I don't know why, but probably it's because some rule in the company's firewall or proxy, right? What I did to trick this was create an account on NO-IP.org, which provides me with a DNS to my host. In this moment, my "network" is something like this:
When I try to connect (by my work PC) with "telnet xxxxx.no-ip.org 80", or with Putty, I get a blank screen, no errors, no nothing.
But when I try to do this on another PC, on another network without proxies, I'm successfull. So I really think that is my company proxy thats blocking this way, am I correct?
So I think that the solution for my problem is to create a tunnel, to transport my SSH connection over an HTTP, through the Port 80.
But is there a way to do this?
It would be something like this:
Is that correct?
If so, how could I do this?
I'm trying for a week now, with programs like http-tunnel, proxy-tunnel, and others. But nothing until now.
So, any ideias how could I could communicate my SSH client at work over a HTTP (port 80) connection, over NO-IP, my modem, my server, HTTP to SSH, and finally my SSH server?
I have server with Debian and Apache installed. Webpage content located in /var/www folder. For failserver I have Windows server 2003, which runs Mysql service thats needed for library software. And on this machine theres Inetpub/wwwroot with library webcontent. Sofar its only accessible localy. How can make Apche webserver to take content from this local server machine and show it publicly.
View 14 Replies View RelatedI have set up a FTP server in my home (FileZilla) and everything works how it is supposed to. I understand that port forwarding is required and can easily set that up. My question is what IP address do I use to connect to it when I am outside of my home network. Do I use the one my ISP gave me? And how do I figure out what that is? Could my ISP be using NAT that could be messing things up for me? Could there any other configurations that I need to perform ? Also do ISP's frown upon home ftp servers? (USA)
View 5 Replies View Relatedi somehow managed to corrupt ubuntu 10.10 installed on my laptop and subsequently, i loaded a fresh version of ubuntu 10.10 on another partition. i want to access the data in the home folder of the other (previous) partition, but sudo nautilus gives me root privileges only in the current "filesystem" and not on the home folder of the other partition.
although i've been using ubuntu for some time now, but i am largely ignorant about most of the terminal commands.
I have an Ubuntu jaunty fileserver. I connect to the machine from time to time using the Nomachine client on windows.Everything is setup and working perfectly, except for one thing. When I acces the server remotely, I cannot access any external USB drives connected to it. The drive mounts fine, and is available when logged on locally to the machine, just not when logged in via Nomachine.
View 4 Replies View RelatedI installed fedora10 on my system with live cd.I started httpd service.I also set static IP address, subnetmask and default gateway as my proxy server.It is only accessible through http://localhost at the same machine.but I need to access it through http://ipaddress/ on my other LAN machines which has window operating system.
View 8 Replies View RelatedIs it possible to setup apache to normally block an IP from accessing a site until that IP is in a database/file?More or less, I need a login system that another script can add/remove the IPs and the site can be accessed by only those IPs.
View 1 Replies View RelatedA year ago I put some stuff on my external hard drive and now I'd like to retrieve it. I've upgraded through a couple of versions of Ubuntu since then and now it doesn't work. I saw that this is a frequent problem in the forums but couldn't find a solution.
How I can access my drive?
Code:
I've installed a server (CentOS5.2) - and I need a new(er) PHP, so, I get me one. This is what I did:
- unzipped the bundle in the root's home
- of course, I entered the folder
- entered "./configure"
- entered "make" - the compile didn't come back with errors
- entered "make test" - there was a _possible_ fail...
- entered "make install"
I noticed there's nothing in the /libs, where I'd expect a module (lib5php5.so) to exist. there is one, but it belongs to the older PHP. It's located in ets/httpd/modules (a link BTW - but I think that's normal). At the console I type:
"which php" and get a path to PHP /usr/local/bin/php
"php --version" and get 5.2.8 and some extra info
in the server I entered "<?php phpinfo(); .>" in a PHP page, as I call that page, I get ... 5.1.6 as version.
Of course, I suspect Apache to have the OLD PHP in its config, (the old lib5php.so) and that I may have to overwrite the old one with the newly compiled one, if I had it. I ran a locate on the system, but no other lib5php.so files exist. Where did I loose track?
FedoraVersion 12 ConstantineNoyau Linux 2.6.31.12-174.2.3.fc.x86_64Gnome 2.28.2Memory 871.4 MoAMD Athlon LE-600Free disk 71.5GoSelinux is deactivated.Httpd doesnot start and, when I start "onfiguration des services", and click D�marrer, it runs for ever, but never starts Apache...
View 8 Replies View Related