I've a new USB 3.0 Hub card and plugged it into pcie1x. The chipset on this controller is a NEC uPD720200. I attached a HD to it but it wasn't recognized (but Windows does!).
I'm runnig archlinux (all updates) which shows the card/harddrive as (lsusb) Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub fdisk doesn't show the device.
How to access the HD?
I want to access files on my external harddrive through GNOME, beyond plugging it into my computer via USB I have no idea what to do next..I think it has something to do with a mount point or the 'mount' command...to summarise, my question is how can I access extern. HardD through GNOME?
View 4 Replies View RelatedI have a Seagate Expansion external drive.
It won't load as it is NTFS. Am I okay to reformat it using GParted? I'm unable to get the drive up in a window, but GParted can see it.
i have two centos systems one automounts the external usb hard drive and other doesn't what do you think could be missing in the system that is not automounting the external usb drive.
View 4 Replies View RelatedI installed Ubuntu on a portable harddrive so that I can use it independently of my computer (when I visit my parents or my g/f). I performed the installation using a bootable Ubuntu thumbdrive, everything went fine but when I unplugged the thumbdrive and rebooted I got a kernel panic. I was able to boot into Ubuntu on my external drive once (I think it might have been due to reordering boot order in BIOS). My guess is that the kernel panic occurs due to the drive letter changing (sdb -> sdc) depending on which external devices are plugged in, but I'm not sure how to make sure that's the case. And if it is, how would I prevent this from happening?
View 2 Replies View RelatedHow do you format an external harddrive to ext4 or ntfs?
View 5 Replies View Related1. Is this possible without loosing the data on the external harddrive?
2. How is it done?
3. WIll I be able to read and write on both Ubuntu and OS X 10.6? (like I can now)
I have a iBook G3 that dosnt want to boot up at all. It makes the ding then a grey screen pops up. How do I install Ubuntu onto my iBook G3 with a external USB harddrive? is there a way?
View 4 Replies View RelatedThis community is very helpful to me.i have one external usb harddisk but its not getting detected any where.i have some important data.i want to recover that data.so could any one telme how to recover data from dead usb external hard drive.any help appreciated please helpme.no hardware is detecting but one small green light is coming.
View 3 Replies View Relatedi have an external harddrive which i encrypted scince opensuse 10.2 with luks. Now i installed opensuse 11.2 its impossible to me to mount this drive correctly.
the harddrive was recocnized in my former opensuse 11.0 correctly as luks encrypted and during installation yast installed the kernel module and encrypted the harddrive so that i regulay could mount it on boot by giving the password for that harddrive. Scince opensuse 11.2 however yast thinks this is an dmcrypted partitoon and tries to unlock the harddrive using dmcrypt which of course fails.
does somebody know how i can encrypt and mount the externeal drive automaticly?
i have made a backup of /etc before i made a new installation of opensuse 11.2. is the possible to use the old fstab entries for that after installing luks?
First of all I have to say I love Fedora, just switched from openSuSE after the system was kinda sluggish the last 2 or 3 versions. But one thing I always liked was the fact that when the system went into suspend my external harddrive spun down and after resuming it spun up again as soon as I tried to access a file. Now in Fedora the harddrive continues spinning and is unavailable after resuming. There is nothing about the harddrive in dmesg, not during suspending and not even when i unplug it after resuming.
View 7 Replies View RelatedI work for a company who has a really closed proxy configuration, and I think that only the port 80 is opened, but with a lot of blocked sites.
I guess that for other cases, like bank sites and others, they opened the 443 port too. But other ports are all closed.
I set up a linux server at home, and I need to access it with SSH. However, I can't access my server directly by its IP number,
I don't know why, but probably it's because some rule in the company's firewall or proxy, right? What I did to trick this was create an account on NO-IP.org, which provides me with a DNS to my host. In this moment, my "network" is something like this:
When I try to connect (by my work PC) with "telnet xxxxx.no-ip.org 80", or with Putty, I get a blank screen, no errors, no nothing.
But when I try to do this on another PC, on another network without proxies, I'm successfull. So I really think that is my company proxy thats blocking this way, am I correct?
So I think that the solution for my problem is to create a tunnel, to transport my SSH connection over an HTTP, through the Port 80.
But is there a way to do this?
It would be something like this:
Is that correct?
If so, how could I do this?
I'm trying for a week now, with programs like http-tunnel, proxy-tunnel, and others. But nothing until now.
So, any ideias how could I could communicate my SSH client at work over a HTTP (port 80) connection, over NO-IP, my modem, my server, HTTP to SSH, and finally my SSH server?
I've set up Apache on my Fedora 12 machine and have got it working on my internal IP (localhost/192.168.0.15) however, when I try to access it through my external IP I am taken to my router login page.
What do I need to do to route my external IP to my internal static IP of 192.168.0.15?
I have an Ubuntu jaunty fileserver. I connect to the machine from time to time using the Nomachine client on windows.Everything is setup and working perfectly, except for one thing. When I acces the server remotely, I cannot access any external USB drives connected to it. The drive mounts fine, and is available when logged on locally to the machine, just not when logged in via Nomachine.
View 4 Replies View RelatedIn the Ubuntu "Places" menu my external harddrive icon always shows up with a "broken" icon or the grey screen with lower righthand corner turned. Changing the icon in Nautilus doesn't affect it.
View 6 Replies View RelatedA year ago I put some stuff on my external hard drive and now I'd like to retrieve it. I've upgraded through a couple of versions of Ubuntu since then and now it doesn't work. I saw that this is a frequent problem in the forums but couldn't find a solution.
How I can access my drive?
Code:
i've worked with Linux for a while now, but never in a double boot kind of way (except using wubi), and i'm still kind of a newby.i have 2 harddrivesfirst one has only 1 partition; Windows XPsecond one has 1 empty partition, simple storageand another partition where i installed fedora core, and GRUB is also located on this harddrive.I changed harddrive priority to my second harddrive, result:GRUB comes up, no problem, but when I try to boot windows, it tells mentldr is missing ctrl alt del to continueso i changed the harddisk priority back to the way it was, where the first drive containing windows is first priority... but then, no GRUB.i've tried editing the grub conf,i've tried fixboot/fixmbrtl;dr:no ntdlr when linux harddrive is main priorityno grub when windows harddrive is main priority
View 4 Replies View RelatedI would like to access my NSA-220 Plus through the Internet without having computer turned on. I tried to set it up as a FTP server but I was not successful. I tried few tutorials but all allow me to access NSA-220 Plus only within my home network which is not what I want. Also I tried user manual which does not really tell you how to do this.
View 2 Replies View RelatedI am running Ubuntu 10.04, and i recently purchased an tandberg LTO-4 SAS tape drive. I want to access it and backup data on it. Do I simply just connect plug it into the server,and I should be able to backup/transfer data to the tape drive? Or are there intermediate steps before I can do that. Here are some results from commands that I have typed:
Quote:
ls /dev/tape/
by-id
Quote:
ls -lt /dev/tape/by-id/
total 0
lrwxrwxrwx 1 root root 9 2011-02-25 14:54 scsi-3500110a00145553e -> ../../st0
lrwxrwxrwx 1 root root 10 2011-02-25 14:54 scsi-3500110a00145553e-nst -> ../../nst0
[code]....
how to mount HDDalways all time when i restart system automatic mount when system startup
View 1 Replies View Relatedi noticed that my 2 internal harddrives are mounted within the system (i can see them with DF) but they do not show up with Dolphin (running KDE Suse 11.3).Now i added them manually. Might be that a bug or did i something wrong at installation?
View 4 Replies View RelatedI think I have a corrupted file system on my 1TB harddrive as both Windows Vista and Ubuntu are not seeing it. How do I recover the drive. I have never experienced this sort of thing before.
View 9 Replies View RelatedI am running windows 7. I want to install Ubuntu 10.04 on a second harddrive. I am new at this and would like to know the correct way to do it.
View 3 Replies View RelatedI am running Ubuntu 10.04 and recently installed Linux Mint on an other partition. I am now finding that when I boot up I get a message that Grub is unable to find a hard-dirve that does not exist.
how to tell Grub (or is it something/where else) not to look for a non-existent hard drive?
I have two harddrives installed on my HTPC. I am using the smaller (120gb) to run the OS (kubuntu 10) the larger (1 tb) I want to use to store all of my media.
However....
The second hard drive has THREE linux Distros on it (from me testing and playing and making decisions) and I CANT figure out how to get them off.....
The hard drives are SATA and plugged in in the correct order.
I have tried fdisking and reformating which seemed to work, but when I boot it still asks me which OS i want to boot to.
Right now I am trying to zero out the hard drive by using ths
dd if=/dev/zero of=/dev/sdb
I typed that in as root about 15 minutes ago and hit enter. it hasn't said anything since. no command prompt or anythng. I am hoping it is working, we will see.
In my server I have 2 harddrives. sda and sdbSata port 1 = sdaSata port 2 = sdbBut after i add a new harddrive the new structure looks like this:
Sata port 1 = sda
Sata port 2 = sdc
Sata port 3 = sdb
[code]....
After install Centos 5 32bit into harddrive 1, is it still possible to add RAID 0 (harddrive 1 + 2)?
View 1 Replies View RelatedI have a working Centos 5.4 (== Red Hat Enterprise Linux 5.4) kickstart installation working with pxe boot.I am now trying to do the same kickstart installation but from a SCSI harddrive on the hardware box itself.In other words, the system already has an older distribution on it, and it has a formatted LVM partition with free space. I expect to upload an initrd, vmlinux, ks.cfg at the top of this partition, edit the grub.conf with something like so:
grub.conf
--------
title TestOS
[code].....
When i tried to install redhat 9 with cd it will as for add harddrive drivers...and i cant add it the installation was stoped...
View 3 Replies View RelatedI'm a new user to Fedora and wonder one thing.
I install like this. code...
All whas encrypted thrue the setup.
When i log back in i check places/removeable media/25.1 GB Encrypted data. and when i press i type my password and hit enter, but it wont decrypt?
I have disk on desktop, bt i cant do anything whit it?