I develop many websites at the time in php, so I created virtual hosts in apache. In order for them to work properly I edited /etc/hosts like thisQuote:
10.50.2.105hal.mundohal# Added by NetworkManager
127.0.0.1localhost.localdomainlocalhost
::1hal.mundohallocalhost6.localdomain6localhost6
[code]....
I' have FC10,firefox3.0.4it take ages to load any page.the d/l speed is good .but while loading pages it takes a lot of time!while on XP everything works fine even though the the firefox version being an earlier one than FC10
View 4 Replies View RelatedI'm using a 3G modem whilst o2 transfer over adsl. trouble is no websites load but I can resolve domains. I enabled masquerade on the PPP0 ( modem) interface. added the server as default route for all workstations.
iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE
net.ipv4.ip_forward = 1″ to /etc/sysctl.conf
HTTP - Can't see website(s) externally
View 4 Replies View RelatedI have got a small queston: I have got several websites and some time ago I decided to delete some of them. As a result there is no virtual hosts on my web server, but if I will go to my_old_website dot ru I will be redirected to one of my current web sites (or if I will paste an ip address in browser), I want to know, how to block this?My virtual host's looks like this now:
Code:
<VirtualHost *:80>
ServerAdmin my_mail
[code]...
I would like to know if I need multiple IPs' to setup two SSL urls on the same Apache server? Two ssl certificates, one IP - is it possible?
View 4 Replies View RelatedI just installed 10.10 for netbooks, and apparently it's using the RT2800PCI driver for my wireless NIC in my EeePC 901. That driver is causing havoc with my school network, I keep getting disconnected, and loading websites is really slow.
Now I know that 10.04 uses a different driver RT2860 which seems to work far better on this network.
How to change to the driver from lucid. Or does anyone know of an even better solution? I've heard rumors about something called ndiswrapper...
Problem:Your company network has internal only hosts / websites with names that end in .local, e.g.Your freshly installed Ubuntu machine works fine on the network, has internet access, etc. but cannot connect to these particular systems.Testing DNS with tools like dig / nslookup works fine, but normal name resolution with ping / telnet / browsers does not work.Solution:1. Open a terminal window2. Enter the command sudo nano /etc/nsswitch.conf3. Change the following line:hosts: files mdns4_minimal [notfound=RETURN] dns mdns4to this:hosts: files dns4. Press Ctrl-X, Y, Enter to saveExplanation:Ubuntu ships configured to do name lookups for self-configuring networks, based on the AppleTalk / mDNS / Bonjour protocol. In the configuration shipped for the resolver, this protocol is considered the final aurhority for the ".local" top level domain, and DNS will not be checked. The above configuration change eliminates this and restricts lookups to (a) /etc/hosts file, followed by (b) DNS
View 1 Replies View RelatedIs it possible to run two servers through one ip address? And I don't mean through apache to run virtual servers. Right now my set up is: Cable modem>router>server.
View 9 Replies View RelatedI have a postfix mail server on ubuntu 10.04 lts behind a router. so all local users are fetching/sending mails through ms outlook using local IP. Sometimes when internet goes down and any mail send then it bounced back immediately saying domain not found. Can u please tell me how i configure to hold all mails in postfix server rather than bounce when internet fails and will pass through when restored the internet around 15-30 minutes?
View 2 Replies View Relatedi am working with an old system that uses a BIOS meant for embedded systems. According to my coworkers this thing boot some version of debian about two years ago. currently I have used there old image and a new one I made of the latest Debian stable build. both images fail to get passed grub.
to be clear the BIOS simply replies "loading grub" takes ten minutes and then crashes.
has anyone ever had trouble with grub crashing systems? this problem seems odd since is did boot with this two years ago and i still have that image.
I have been looking into setting up a local repository for updates etc as we have an increasing number of fedora clients/servers. Searching the web I found multiple how-to's on how to accomplish this little project. One thing that bothers me is that each how-to seems to refer to a "static URL" mirror for rsync to get the rpms.
View 1 Replies View RelatedI have a home network set up that includes windows xp and a local server. DNS resolution allows both machines to access the internet. I know this because firefox works on the xp machine, and yum works on the fedora machine.I can see the server index page through firefox by ip. I can't see it by url.
/etc/sysconfig/network settings:
NETWORKING=yes
HOSTNAME=fred.mycoachdomain.com
[code]....
I've tried, but now I give up. I'm trying to run Apache on FC9. Nothing fancy, no extras, just the default installed apache. [correction, I have coldfusion installed, however the service is not running] I've set the Listen variable to every combination I could think of, with no success. I can set it whatever I like (such as my local IP) on any port other than port 80. If I try to set it to 192.168.x.x:80, it gives me the error message:
Starting httpd: (98)Address already in use: make_sock: could not bind to address 192.168.x.x:80
I've run netstat commands to try and find applications listening on port 80 and found nothing. Whenever I chose a port other than 80 to get the service to start successfully, I am able to serve pages locally. But even with my ports forwarded correctly, no one outside the local network can see it. I've checked with nmap that my machine is opening the ports and even cheated, disabling the firewall during testing to ensure it was not part of the problem.
I noticed while locally nmaping my server that whenever I set Listen 192.168.x.x:8081, 8081 is opened, as well as normal port 80. When I stop the httpd service, both those ports are simultaneously closed. Why is httpd opening port 80? I'm assuming this is related to why I cannot assign Listen to port 80. If I run remote scans from sites like www.nmap-online.com and www.canyouseeme.org, nmap-online will report filtered on ports 80 and 8081 if my httpd is running, and if httpd stopped, 80 is closed, filtered 8081.
Can you seem reports success on ports 80 and 8081 if httpd is running, fail if httpd is stopped. I'm sure thats all a lot of information cluttered in to all that. To summarize, I cannot start my httpd server on port 80, and I cannot ever see my webpages beyond my local network. Am I missing something extremely is simple and I'm just over looking it?
I have fedora running as our email server at work using sendmail. It used to have spamassassin and MailScanner installed, but one of those died over the weekend and killed the mail server. We do not need either of these as we are using a web based spam filter now (postini), so I tried removing these. I have discovered that the mail is in the mqueue waiting for delivery to the users mailboxes. I have tried using "sendmail -q -v":
Code:
Running /var/spool/mqueue/n51Jx6Gg023820 (sequence 1 of 1174)
<abaughman@grandproductsinc.com>... Connecting to local...
<abaughman@grandproductsinc.com>... Deferred: local mailer (/usr/bin/procmail) exited with EX_TEMPFAIL
Running /var/spool/mqueue/n51JsuRe023619 (sequence 2 of 1174)
<ksullivan@grandproductsinc.com>... Connecting to local...
<ksullivan@grandproductsinc.com>... Deferred: local mailer (/usr/bin/procmail) exited with EX_TEMPFAIL .....
I do not have a procmail config file: /etc/procmailrc. I am not sure why, or what it should be, perhaps that is the problem. I guess I don't exactly know how this server runs all that well. I was able to get it up and running but never understood it enough to now find what is not working correctly.
I 'am trying to set a web server to develop in local website, i follow the guide in server to install php mysql but i 've got this error to set up the password of mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'(2)i'm a noob in linux so i don't know how to resolve it.
View 10 Replies View RelatedI need to know how to install php when apache is in /usr/local/apache2
View 6 Replies View RelatedThe situation is this, I have one of those router cable/wifi. So I have the main pc plugged to the router, the router give local ip for all my network (the others computers connects via wi-fi). Main pc starts up apache under Fedora 12, http://localhost.. works, http://127.0.0.1.. works, http://192.168.0.13 (my local ip) works. But when I try to connect to http://192.168.0.13 from another pc of my local network, it doesn't work. The others pcs are running windows vista.
I go another computers ping 192.168.0.13, responds!
From the main computer ping 192.168.0.14, responds!
So, there is communication between the machines, but I cant get to work under apache. I tried opening port 80 with iptables, i tried changing apache's port to another.
I'm trying to set up a framework where people connected to same wifi connection can enter a local site for developing purposes.I want them to be thrown to a local copy (development copy of the site) when they type in www.development.loc in the browser.I don't want to connect the world, only people connected to my wifi.Anyone willing to help by stating what I need to edit to :1. Allow me to access local copy of site that's on computer (located : /var/www/developmentsitename/) using www.development.loc in browser./and2a. What do I edit to create the server accessible by other computers connected to same wifi connection. 2b. If another computer can connect to this site now, can we create a virtual desktop setting in which workers can work as if they have their own partition on the server to work on and upload work onto the development server.
View 2 Replies View RelatedI have working localhost on my Fedora 15. Directory tree look like this
Code:
/var/www/html/default
/var/www/html/projects
/projects/foo
/projects/bar
[code]....
I thought the standard was that rc.local was executed before GDM and Nautilus loads. For some odd reason, my Lenny desktop is loading Nautilus before it decides to execute rc.local. This is causing me some serious problems.
View 2 Replies View RelatedI have a lab of 10 computers with ips from 192.168.1.120 to 192.168.1.130 the server's Ip is 192.168.1.116When I am on client computer I type the server's Ip address on the browser and it works. All i want is that instead of entering my servers Ip I could just enter an address like: example.lan
View 3 Replies View RelatedHow would I find out what servers are running on my local system from the command line? I cannot find out how to accomplish this anywhere?
View 3 Replies View RelatedI found 2 previous posts, one from 2005 and one from 2006. The 2005 post was not very helpful and the 2006 threads are not exactly what I was expecting. So I wanted to ask the question to be sure. I have already stood up the new fedora 12 server. The old server is also fedora 12. I need to migrate local users and sendmail mailboxes. In the past couple of years the environment was small enough to create a copy of the users and then have the users mail themselves, but I want to start migrating users/mailboxes properly.
On a unix level I am a jr admin, but I have extensive senior level experience as a windows engineer and network engineer. I do feel comfortable with using the unix command line, but usually operate the unix systems thru webmin because I am not familular with more complex commands. Ideally a software solution to migrate users and/or mailboxes from one server to another is what I am looking for, but in leiu of a software solution I still need to migrate user accounts and their mailboxes. LDAP is not in place, but if the process becomes easier with LDAP I am willing to do what is needed to set up LDAP. (I have no previous experience setting up LDAP)
I do not want to change my mail server from sendmail to different software. At least right now. Both systems are up and running. They can connect to each other via public ipv4 address' only. The new server has already been installed and configured with all the software to match the old server. How do I migrate users and sendmail mailboxes from one fedora 12 server to another fedora 12 server?
I'm in the process of creating local repos for our company servers (CentOS 5.5) and laptops (Fedora 13). And while the CentOS part went perfect the Fedora part is causing major trouble.
But first things first, here's the setup: a central CentOS 5.5 server is running Apache2 and has a VirtualHost listening on Port 8080 for both CentOS and Fedora. The DocumentRoot for this VirtualHost is /data/repo wherein two directories, centos and fedora, reside.
This is the .repo-file for CentOS that works like a charm:
Quote:
[local]
name=CentOS-$releasever - local packages for $basearch
baseurl=url
enabled=1
After the CentOS repository was up and running I follwed the exact same steps and was expecting to find a Fedora repo up and running (I know, I know, silly me...). However, yum complains it cannot download the repomd.xml. The .repo-File is as follows:
Quote:
[local]
name=Fedora $releasever - $basearch
baseurl=http://icld:8080/fedora/$releasever/local/$basearch
enabled=1
gpgcheck=0
protect=1
Yum returns the following error message:
Error: Cannot retrieve repository metadata (repomd.xml) for repository: local. Please verify its path and try again
The path is definitely correct - copying the url and pasting it into a webbrowser returns the correct repomd.xml file, so does pasting it to wget.
Any ideas? Does createrepo need any parameters in order to create a working Fedora repository?
So here is my problem. I have websiteA.com and websiteB.com. I only have one public IP address. And websiteB needs to be constantly restarted, so both need to be on separate apache servers or instances.Virtual directories wont work cause I can only point websiteA to a directory /var/www/websiteA.Reverse proxy wont work cause I can only catch a sub directory.Proxy /websiteA/ URL...Does anyone know how I could get this to work in anyway.
View 4 Replies View RelatedI finally got the certs to configure:
openvpn --config server.conf
Tue May 3 17:26:27 2011 OpenVPN 2.1.1 i686-redhat-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Jan 5 2010
Tue May 3 17:26:27 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Tue May 3 17:26:27 2011 Diffie-Hellman initialized with 1024 bit key
Tue May 3 17:26:27 2011 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Tue May 3 17:26:27 2011 ROUTE default_gateway=192.168.122.1
Tue May 3 17:26:27 2011 TUN/TAP device tun0 opened
Tue May 3 17:26:27 2011 TUN/TAP TX queue length set to 100
Tue May 3 17:26:27 2011 /sbin/ip link set dev tun0 up mtu 1500
Tue May 3 17:26:27 2011 /sbin/ip addr add dev tun0 local 10.8.0.1 peer 10.8.0.2
Tue May 3 17:26:27 2011 /sbin/ip route add 10.8.0.0/24 via 10.8.0.2
Tue May 3 17:26:27 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Tue May 3 17:26:27 2011 Socket Buffers: R=[114688->131072] S=[114688->131072]
Tue May 3 17:26:27 2011 UDPv4 link local (bound): [undef]:1194
Tue May 3 17:26:27 2011 UDPv4 link remote: [undef]
Tue May 3 17:26:27 2011 MULTI: multi_init called, r=256 v=256
Tue May 3 17:26:27 2011 IFCONFIG POOL: base=10.8.0.4 size=62
Tue May 3 17:26:27 2011 IFCONFIG POOL LIST
Tue May 3 17:26:27 2011 Initialization Sequence Completed
But openvpn still won't start; where to go from here.
Tue May 3 17:54:25 2011 TCP/UDP: Socket bind failed on local address 192.168.122.3:1194: Address already in use
Tue May 3 17:54:25 2011 Exiting
G'day. My distro is Fedora 13. I received the above subject error message at boot. My /etc/fstab is attached as follow:
#
# /etc/fstab
# Created by anaconda on Fri Mar 5 12:44:10 2010
#
# Accessible filesystems, by reference, are maintained under '/dev/disk'
[code].....
I'm setting up a server on Ubuntu 10.04 for development. It all seems to work nicely, I just have one thing that's bugging me. I have a project in /var/www/portfolio, which is as you may guess my portfolio. Instead of the link http://localhost/portfolio I'd like to use http://portfolio.nl. So I set up a file 'portfolio.nl' under sites-available and a symlink on sites-enabled containing this: To get this to work on my local machine I set up this in /etc/hosts:
[Code]...
I am trying add three namebased virtual hosts in local apache2 webserver OS ubuntu 10.10. The three sites are :www.site1.eka,www.site2.eka,www.site2.eka
The first I created a file is virtual.conf in conf.d directory its content is :
# we're running multiple virtual hosts.
# NameVirtualHost *:80
Next I created following files in sites-available directory. [URL] is as follows:
#site1.eka (/etc/apache2/sites-available/www.site1.eka)
<VirtualHost *:80>
ServerAdmin webmaster@site1.eka
ServerName www.site1.eka
ServerAlias site1.eka .....
When I visit the [URL] in browser it says server not found.