Loaded plugins: fastestmirror Repository updates is listed more than once in the configuration Determining fastest mirrors YumRepo Error: All mirror URLs are not using ftp, http[s] or file. Eg. 13 is not a valid release or hasnt been released yet/ removing mirrorlist with no valid mirrors: /var/cache/yum/i386/13/base/mirrorlist.txt Error: Cannot find a valid baseurl for repo: base
I recently did my first installation of centos on a vm. I tried playing around for a while but when I tried doing an update it says Determining fastest mirrors for a while then gave me Could not retrieve mirrorlist [url]
i am trying to install the GD2 extension for PHP but i am not sure how to do this. i have try the
yum install php-gd Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile Could not retrieve mirrorlist http://apt.sw.be/dries/fedora/fc4/mirrors-rpmforge error was [Errno 14] HTTP Error 404: Not Found Error: Cannot find a valid baseurl for repo: rpmforge
I have a server running centos 5 located in a datacenter. I am setting it up as a web server but haven't bothered to move the domain from my current registrar to the server as there are a lot of things I need to get done before that. I am having a problem where I couldn't install httpd. So i tried some of the basic fixes i knew as far as yum clean all and checking that my /etc/resolv.conf was ok. I have the two nameservers I am using listed there but I have no hostname set because I simply dont have the domain transferred or anything like that yet. Is that the reason I am having these issues. I installed the system with a network install fine about a month ago so im not sure why I am having problems now.When i try to ping centos.org I get an unknown host www.centos.org error. I tried changing the resolv.conf to have localhost as the hostname and I still have the same issues. I havent made any changes to anything that would potentially cause this.
My etc/resolv.conf looks like this: search nameserver 12.34.567.8 nameserver 12.34.566.8
Also it seems the problem may have got worse after yum clean-all because before that when I would try 'yum install httpd' it would show the files and filesizes and ask to install, when I would select yes It would give an error showing it could not find the fastestmirror. Now it doesn't give any file size or files or an option to approve the install. It just responds with an error saying it could not retrieve mirrorlist <urlopen error (-3, 'Temporary failure in name resolution' Error Cannot find a valid baseurl for repo: base
I try to do a upgrade on my fedora 6 ill 10. But when I try to write yum update or yum upgrade on my server a get this error: yum update Loading "installonlyn" plugin Setting up update process Setting up repositories Error: Cannot find a valid baseurl for repo: extras
The main Fedora repo file has this entry: baseurl=[url]
I want to know about the "$xxx" dollar sign bits - $releasever $basearch
I know from browsing there and certain mirrors that they contain directories for 13, 12, 11. So does that mean the file entry is just a "general" line but the version installation of yum _knows_ it should put 13 against those 2 entries?
IOW, does the background python script or binary expect to see that actual use of the dollar sign parts in the repo file?
I tried to make a new entry baseurl with a known mirror, making appropriate changes for its directory structure _and_ using the $xxx bits but on trying it out got errors usually about "repond.xml" and/or "gpg-keys".
I omitted them next just using the actual letters - .../releases/13/Everything/i386/os/
I wasn't paying proper attention when adding a repo to yast and need to find the file were the info is saved to delete this. The problem is that whenever i use yast it comes up with an error code saying that it can't find the data for the 'problem' repo. Have tried zypper rm but that comes up with a similar error advising that the data is in a format that was not expected. My thinking is to track the file were the yast repo source details are saved, delete this and then just add the repos that i use back.
I'm in the process of creating local repos for our company servers (CentOS 5.5) and laptops (Fedora 13). And while the CentOS part went perfect the Fedora part is causing major trouble.
But first things first, here's the setup: a central CentOS 5.5 server is running Apache2 and has a VirtualHost listening on Port 8080 for both CentOS and Fedora. The DocumentRoot for this VirtualHost is /data/repo wherein two directories, centos and fedora, reside.
This is the .repo-file for CentOS that works like a charm:
[local] name=CentOS-$releasever - local packages for $basearch baseurl=url enabled=1
After the CentOS repository was up and running I follwed the exact same steps and was expecting to find a Fedora repo up and running (I know, I know, silly me...). However, yum complains it cannot download the repomd.xml. The .repo-File is as follows:
My problem is configure and start FTP server on own computer. I edited configure files, and i try to run ProFTP. Then i see that communication: Launch proftpd: - warning: unable to determine IP address of 'dhcppc1'
Please let me know how to delete/flush complete LDAP database ? I tried deleting all files from /var/openl dap- data. but still top level data base attributes remains.initially I had set shadowExpire,shadowFlag etc, I want to remove all these.Kindly help me to build my new database.
Just checking to be sure. 5.3>5.4 update went without a hitch:) But a message ran about (/etc/yum.repo.d) CentOS-Base.repo.rpmnew. Comparing CentOS-Base.repo with the new one show the 1st has the correct priorities and .rpmnew does not have the correct priorities. Should I remove the *.rpmnew repo after making sure it otherwise is the same as the original CentOS-Base.repo?
I recently upgraded two servers to F10 from F9 and one of them is having an issue where package-cleanup is showing 13 packages which are incorrectly orphaned (no longer in the repo). Has anyone seen this before and know how to resolve this? Is it simply because the packages are listed in the repo as "fc10" vs "fc9"?
I'm getting the following error when I try to install anything with yum: Code: Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again. I tried editing /etc/yum.repos.d/fedora.repo and /etc/yum.repos.d/fedora-updates.repo, and also amending the host file as explained in this fix. [URL]. Still doesn't work. I am behind a proxy.
I need to installing updates on fedora in my computer.
Error Type: <class 'yum.Errors.RepoError'> Error Value: Error getting repository data for installed, repository not found File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module> main() File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main backend.dispatcher(sys.argv[1:]) File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher self.dispatch_command(args, args[1:]) File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command self.update_packages(only_trusted, package_ids) File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages signed = self._is_package_repo_signed(pkg) File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed repo = self.yumbase.repos.getRepo(pkg.repoid) File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo 'Error getting repository data for $s, repository not found' $ (repoid)
i'm attempting to know and understand fedora more and i will spend probably the next month pouring through all the forums and documents to answer more of my own questions. but there's quite a bit here, so i'd thought i'd ask some noob questions to get me started a little.
ive installed fedora 14 64bit and chosen only kde as the desktop. i selected an extra 2 repos besides the default, fedora 14 -x86_64 and fedora 14-x86_64 -updates. i believe this kernel is installed: 126.96.36.199-83
1. i can only see the 2 extra repo's as being "checked" in kpackagekit, shouldn't i see the default repo also ?
2. i dont have an applet in the system tray indicating the system is up to date, does fedora have this by default ? also after a clean install i ran yum check-update and yum update but the message sayes: "no packages marked for update". i'm not sure if the system is auto-updated during install or not, but with other distros iv tried there is always atleast a few updates needing to be done after install.
3. is kpackagekit the fedora gui package manager ? i dont see any others.
4. i want to upgrade to nvidia drivers, but i think i am missing a non-free repo or something. when i enter: yum install kmod-nvidia xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64 i get messages stating "no package" i get the same message with yum install nvidia-settings.i also tried this: LANG=C yum --enablerepo=rpmfusion-nonfree info akmod-nvidia but it sayes repo not found.
I am trying to import a gfs2 filesystem using gnbd_import, but I get the error: gnbd_import: ERROR could not find gnbd registered in /proc/devices. This probably means that you have not loaded the gnbd module. yum provides gnbd.ko does not list any packages. Where can I find the gnbd module?
This file (and a couple others) are missing from packman ATM.I've seen them (need version 0.10.30 or greater) at multimedia:/libs.My doubt is, does these gstreamer packages housed at download.opensuse.org are limited due to DCMA/patent issues, like OOTB k3b/libxine are