DHCP server on F12 wont to start, recieving "semicolon expected." errors everytime
have to start in on eth0 alias
my /etc/dhcp/dhcpd.conf
============================
DHCPARGS="eth0:0"
ddns-update-style interim;
ignore client-updates;
[Code]....
if i comment firts 3 lines, than semicolon expected." errors will point again from next uncomented line.
here s what i did :
# yum install dhcp
#gedit /etc/dhcpd.conf
#service dhcp restart
Starting DHCP
[Code]...
what am i missing ? , and how can i be sure if the Dhcp server is working exactly what i want
have f13 runing and finished configuring dhcp. but i tried to start the service using '/etc/init.d/dhcpd restart and service dhcpd start', i failed in return. pls what could be responsible? tried starting the service but still failed. could anything be stopping it?output from /var/log/messages says;
line 1: this version of ISC DHCP is based on the release available
line 2: features have been added and other changes
line 3: have been made to the base software release in order to make
line 4: it work better with this distribution
line 5: please report for this software via the RedHat Bugzilla site:
line 6: http://bugzilla.redhat.com
line 7: exiting.
those are the reports from the log.
On my server Linux Redhat i want to configure dhcp server but when i check the dhcp status the dhcpd was stopped and i try to invoked or to start it failed. Even when open the graphical mode service configuration, check the box and click start the output error message is dhcp failed. the error: Starting dhcpd:Failed.
How would i start the dhcpd service to run
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies View RelatedI'm trying to build a Fedora 12 cluster to run DHCP on top of two servers using pacemaker and drbd. The pacemaker runs great but i'm having the hardest time getting DRBD installed.
My kernel version is 2.6.32.11-99.fc12.i686.PAE First i tried to [root@dhcp-primary drbd]#yum install drbd this doesn't give me everything because apparently the kernel module for DRBD must be built from source. so i unpacked drbd-8.3.6.tar.gz and tried :
[Code]...
I'm not very experienced in compiling from source i'd love to make an rpm for this but after scouring the web and trying different install methods, I am still at a loss.
I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies View RelatedI have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices. My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server. One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network. However I have no idea how this could be setup.
View 2 Replies View RelatedI have a small office setup all on public ips and was trying to work out the best way to move the wearhouse computers on to private ips and leave offices on public ips I have server with 2 nics and i have two switches What i am after is how to set it up so all computers can still see each other but private can not access net All the office computers via switch 1 Public IPs All the wearhouse computers via switch 2 Private IPs
1 DHCP server
3 Routers from ISPs going to switch one
Both switches going to DHCP Server
How to configure DHCP server on Fedora?Is there any package available on Fedora 11 ?
View 5 Replies View RelatedIn my instructions for LAN boot, I am up to the next step :"You need the DHCP server software. If your distribution has none then you can use dhcp-3.1.3 and compile it."ok, so in F11 Live USB . . . I have downloaded and extracted files - they are still in Download directory . . .
Code:
[root@localhost Download]# dir
dhcp-3.1.3 dhcp-3.1.3.tar.gz
[code]....
I am trying to set up a DHCP server for a network that does not go on the Internet using fedora 14. I have tried several site and every one I look at has a different dhcpd.conf file. I have tried many and every time I try to start the service they fail. Like I said it does not go on the Internet. No matter what I do when I try to start the dhcpd service it fails code...
View 2 Replies View RelatedI just got DHCP working, but I need to add a "Pre-Defined Option" for the Cisco VoIP network here. At least that's what it's called in Windows. This "Pre-defined Option 150" is necessary on Windows dhcp servers tied to Cisco VoIP networks, but I have no idea where to start getting that set up in Fedora.
View 3 Replies View RelatedI am trying to get custom options to work.
This is my Dhcpd.conf file
This shows that I have 3 custom option in RED.
Now when I try to pull an Ip from the 96.63.0.0/24 subnet I do not see the options in the DHCPACK from the server. The client gets an IP 96.63.0.12 but no options are present in the DHCPACK or any other DHCP transaction. I have confirmed this trhough tcpdumps on the server and client.
The server version I am using is:
The version of the DHCP server is :
Internet Systems Consortium DHCP Server V3.0.6-Fedora
I'm curious if anybody can shed some light for me in this department. We're in a large environment with a Windows DHCP Server. We have been tinkering with LTSP on Edubuntu as thin and fat clients. It works great, but right now we just have 1 server handling the lab, which works fine unless we want to expand, which may be very possible.
These are the instructions I received:
Login to your windows server and load the DHCP configuration screen
Create a DHCP reservation for the MAC address you obtained
Add the configuration options below to enable the machine to boot from the LTSP server
017 Root Path: /opt/ltsp/i386
066 Boot Server Host Name: <ip address>
067 Bootfile Name: ltsp/arch/pxelinux.0 # Specify CPU architecture in place of 'arch', for instance 'i386'
From: [url]
I'm curious, what if I want to have multiple Ubuntu servers on the network that I want to have bootable? For example, let's say I have 3 labs, and 3 servers. Server A to Lab A, Server B to Lab B, and Server C to Lab C. I want all C's computers to boot to C, and B to B, A to A, etc.
1 - How would I add multiple entries on the Windows DHCP Server to allow all 3 (A B C) servers to boot?
2 - How would I be able to isolate the clients so ONLY Lab A clients boot to Server A, etc?
Followed "Every Server Setup Imaginable: SMB, SSH, VPN, VNC, HTTPD (+ PHP), MySQL, More! "
service vncserver start results in following log file in users .vnc directory:
I have Centos 5 installed on a PC in the local network. I have installed the RPM dhcpv6-client-1.0.10-16.el5.i386.rpm on this PC to configure it as DHCP V6 client. The RPM was installed successfully, and I have done modifications to the following files:
1. /etc/sysconfig/network, set the networking to yes.
2. /etc/sysconfig/network-scripts/ifcfg-eth1 set the BOOTPROTO=DHCP.
Now the problem is when I start the client on this pc as dhclient, it throws the following errors, and logs out after some time. All the network configurations were lost and the PC gets disconnected from the network.
[root@ServerB]# dhclient
Internet Systems Consortium DHCP Client V3.0.5-RedHat
Copyright 2004-2006 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
[Code]...
FedoraVersion 12 ConstantineNoyau Linux 2.6.31.12-174.2.3.fc.x86_64Gnome 2.28.2Memory 871.4 MoAMD Athlon LE-600Free disk 71.5GoSelinux is deactivated.Httpd doesnot start and, when I start "onfiguration des services", and click D�marrer, it runs for ever, but never starts Apache...
View 8 Replies View RelatedI can start my webservers sometimes, but not at everytime. After restarting the system, again I can start my web server as usual. Whether it is a problem of fedora9 or web servers?
View 1 Replies View RelatedI have TigerVNC installed on Fedora 14 and when I boot up I get the following message in the log file in the ~/.vnc directory :
Quote:
Tue Nov 30 21:29:00 2010
vncext: VNC extension running!
vncext: Listening for VNC connections on all interface(s), port 5901
vncext: Listening for HTTP connections on all interface(s), port 5801
vncext: created VNC server for screen 0
[Code].....
The interesting thing is that if I run TigerVNC Viewer I actually get accesses to the TigerVNC server.
I am getting this error message: Cannot create file '/var/run/ddclient.pid'. (Permission denied)There is lots of references in google, but no solution.
View 10 Replies View RelatedI'm trying to configure a DHCP server but when I try to start it it just fails.
Code:
log
Jan 10 16:25:52 SRV-LINUX00 dhcpd: Copyright 2004-2008 Internet Systems Consortium.
[code]....
Whenever I start debian it runs fine until it gets to the DHCP part.It completley stops and spends like three minutes with stuff like
Code:
DHCP Request on port 57 interval 4
DHCP Request on port 57 interval 14
[code]....
I am running fedora 10 and webmin squid proxy server, after power failure the squid fails to start. i have tried to start it from command line but failed
[root@ ~]# /etc/init.d/squid start
Starting squid: .................... [FAILED]
[root@ ~]# /etc/init.d/squid reload
[code]....
I can view my website, and ssh in when I've logged in already at home, but if the system gets rebooted, and gets as far as the login screen, I am not able to view the web site or ssh in. I was wondering how to set things up so thatthese services are running independent of logging in.
View 14 Replies View RelatedFor some weird reason dhcpd fails to startup, but when I installed gadmin's dhcpd GUI configuration tool and click activate to start the DHCP server. It works, but for some reason I can't get it to start like a regular service. (Service dhcpd start) Fails without a error code or message.
View 14 Replies View RelatedProftpd has been running OK until recently, when I tried to connect using my laptop. All I get is the proftpd-socket file under /var/run/proftpd/ I cant' find any log files with error messages in them. I have checked /var/log/messages - nothing in there either. I have rebooted the machine after re-installing proftpd. Still it wont start Is there any way to find out why proftpd has decided not to start any more?
View 4 Replies View RelatedFedora 12 64bit KVM
How to stop KVM start at booting?
Then how to start it after booting?
On this system httpd does not start on boot. I can manually start it without errors with service httpd start.
Code:
chkconfig --list httpd
httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off
Where do I look to see why it wont start?
How would I get the SSH server to start before I've logged in?Basically, the problem I have is that if I'm connecedt to my computer remotely over SSH, and reboot the machine, I'm not able to SSH back in after it restarts. As far as I can tell, this is because the SSH server doesn't automatically start up until after I've logged in for the first time.How would I get around that? Surely that is a fairly common scenario for network admins (especially ones who have keyboardless and monitorless machines running).
View 13 Replies View Related