I can view my website, and ssh in when I've logged in already at home, but if the system gets rebooted, and gets as far as the login screen, I am not able to view the web site or ssh in. I was wondering how to set things up so thatthese services are running independent of logging in.
View 14 Replies
I installed Centos 5.5 on a home PC to be used remotely.
All server daemons work fine but only start if the user is logged in.
How do I set the SSH server to start whenever the PC is turned on, rather than when the user is logged in? I read the chkconfig man page online but couldn't find anything.
Plus I put a script in my startup services to be run whenever the computer boots (I'm guessing when the users logs in). How do I go about setting that to run too whenever the system boots instead?
How would I get the SSH server to start before I've logged in?Basically, the problem I have is that if I'm connecedt to my computer remotely over SSH, and reboot the machine, I'm not able to SSH back in after it restarts. As far as I can tell, this is because the SSH server doesn't automatically start up until after I've logged in for the first time.How would I get around that? Surely that is a fairly common scenario for network admins (especially ones who have keyboardless and monitorless machines running).
View 13 Replies View RelatedI have several services set to start in init 3 on a cloud provider. The init scripts appear to be in the correct folder but the services are never started after a reboot. I finally watched the console and all the services start correctly then shutdown after a few moments.
View 9 Replies View RelatedI have 2 services registered one for HAProxy and one for stunnel. When I type service start haproxy or service start stunnel they start and everything works fine. I ran ntsysv and they are set as autostart, and I have init.d scripts that work. I have checked the runlevel and using chkconfig runlevel 3, 4 and 5 are :on. And I also added service haproxy start and service stunnel start to inittab. But when I restart the computer haproxy and stunnel fail to autostart. I am a fedora novice and I have no idea why this isn't working...
View 4 Replies View RelatedI have installed fedora 13 , 86_64. and was working fine until now. The problem was that JEXEC service Froze while booting. So I removed it /etc/init.d. The next time when I booted ATD service Froze, so I removed it by the same way. Next it was the turn of CROND followed by KSM , KSMTUNED. Then came ABRT-DAEMON which I had to type a #yum erase abrt* command. Finally it came to the turn of SM-CLIENT. I don't know where it is or what it is. Didn't find quality posts on the internet. What the heck should I do and I dont want to do a reinstall.
View 14 Replies View RelatedWhenever I start up my laptop running Fedora 14, I notice that it says that it is failing to connect to my default wireless network since the wireless card is not activated. Since it appears that the wireless card is not activated until the NetworkManager service is started, is there anyway for me to set NetworkManager to start before this check is made? Boot message log is attached. [URL]
View 1 Replies View Related Last time I installed the ATI graphics driver on my PC, it was'nt working fine so I uninstalled that driver. I restarted the PC after uninstalling the driver but then, when PC boots and start running the services the screen just hangs and I don't get into the desktop.
I tried to run the xfs service using service xfs restart and also gdm service using service gdm restart, but in both the cases it shows that Unrecognized Service. So, I think it means that the package for xfs and gdm service is not available in my PC. Is that so?
I tried to get into the desktop by running startx but it gave the following error :-
Fatal Server Error: no screen found
consult the fedora project support at [URL] for help.
check the log file at "/var/log/Xorg.0.log" for additional information.
giving up
xinit: connection refused (errno 111): unable to connect to X server
xinit: no such process (errno 3): server error.
is it possible to restart /start/stop all services at the same time without rebooting?
View 3 Replies View RelatedWhy some application has daemon and some others doesn't. I thought just network application has services like httpd, nfs, cups.... but I just found out that cron, gpm.. and other has it to. why other some other applications hasn't got daemon. Just want to know what sort of application has services.
View 2 Replies View RelatedI am running a server init3.During boot I would like to start some services inside screenie. IRC chat, rtorrent etc.How do I do this?
View 1 Replies View RelatedI have Apache Server working online under Fedora Core 6. But before I installed and configured everything, I've been testing in Fedora 12. The problem surges here, when I start the httpd service, every supuse 404 action on a web browser, takes me to localhost. I mean, if I enter google.com, no error, just goes to localhost, http://asdasd, no error, gives back localhost. I used to ignore the problem 'cause I thought it was a problem on my apache, but when I installed the Server on the Fedora Core 6 machine, I found that I have the same problem there. Of course, it only occurs when I am browsing through the same machine that has httpd started. Does anyone know how to change that??
View 6 Replies View Relatedi have installed apache and bind on my server and i've also registered a dynamic domain through dyndns as jan27.dyndns.biz. i am able to successfully host my own webpages using this method.
then i registered a domain name (lets call it "blah.com") through namescheap.com and have registered my nameserver to my ip address. after reconfiguring the my external zones in bind and restarted my services, i am unable to reach my webpages through the new domain name.. www.blah.com and blah.com would lead me to a opendns.com page but interestingly ns1.blah.com loads my webpages successfully.
so my server is doing fine, but there is one odd thing I would like to fix. When I start and stop services, the CPU is maxed out for about five seconds each time. The services start the same speed, but it still does this. Small things like lm_sensors don't do this, just things like httpd and sendmail. THis server was upgraded to Fedora 11 with a netinstall CD a few months ago.
View 4 Replies View RelatedI got my hands on a couple old servers. An HP tc2021 and a Proliant ML110. Sure they're ancient, but I thought they would make a couple of great Ubuntu Servers for a new "start up" business I'm trying out. Now I've got to decide the best scenario to distribute the load between the two servers. I'm going to make an internal domain and will probably be running the following: Kerberos, Samba, Apache, Postfix, mysql, bind, dhcp, SVN, GCC, and Nagios. So in summary, I'll have the following roles; domain controller, web server, file server, and network monitoring services. how they would handle splitting these services up between two servers?
View 1 Replies View RelatedI am trying to give access to ONE single user to start and shutdown tomcat server. The problem being, when I enter syntax: username ALL= /etc/init.d/tomcat5, /usr/local/tomcat/webapps, PASSWD:ALL This gives the user access to start and stop tomcat but also gives user access to start and stop other services within /etc/init.d - such as httpd etc... What is the proper way to give user access to start and stop service, and limiting that power to only one service....
View 2 Replies View RelatedI am running ubuntu 9.10 with the latest patches and all the prerelase patches. At some point and i am not sure when something broke and none off the services start during the boot. Also the virtual consoles do not start. The only services that start are the one that are controlled by the gnome session. In addition i cannot start the rescue mode. It stops loading at same point where the console should show up. I am guessing that the problem is related to the upstart but i am not sure. I never ever had problems with boot in linux and this is very frustrating. I feel like i am running windows and dont know how to troubleshoot. I cannot see anything in the log that would give me a hint? I dont know where too look. I tried to activate the bootlogd but it does not work. Probably beacause the services dont start correctly. Something broke and one of the updates must changed something but i dont know what and where? Anyone can recommend where to look? How do i see the interactive boot? I tried remove the splash and quiet from grub config but i could not see anything there. I got too fast to the x login.
View 9 Replies View RelatedWhen installing a package that runs a service why is that service started? Surely, this flies in the face of convention and security.
View 14 Replies View RelatedI've a little Server and wanna start the services (postfix, apache, etc.) without root. My problem is, that I've installed GroupOffice and I allways got errors about permisions in some folder. When I took a look, some of the folder the apache created were from root some from www-data. After some searches in the Internet I've read that only the root user is allowed to start a Service at Ports 1-1024 or something like that...
I've already searched for programs which give the rights to the applications / unlocks them with root for a certain application ... but I've no more idea what words to search for.
Where is that **itt implemented? Is it possible to disable that?
How can I start the services without giving them root privileges?! It's a security issue after all.
I have moved from a raspberry pi to an olimex LIME A20. I have managed to get everything working correctly except mediatomb. I have a USB drive attached, I believe that mediatomb is trying to read the drive before it's mounted leaving me with an empty database.
After boot I can create the mediatomb database which works until I reboot the computer. What can I try to delay the mediatomb services start?
I'm having some strange problems in my system (Ubuntu 9.10 32 bits). Several services (Cups, MySQL, VirtualBox kernel driver, etc) aren't starting during boot time. It's possible start them manually (e.g. /etc/init.d/cups start). The other problem is that my virtual terminals (ctrl + alt + f[1-6]) aren't starting with the system too
View 9 Replies View RelatedI've been running Ubuntu 9.10 since November '09, and since a month or so I'm having boot problems. Gnome starts, but some core services such as ssh and dnsmasq (that have started on boot somewhere in time), don't start anymore. Neither does rc.local fire, so I basically have to startup these things by hand.
Also, I cannot get into the console anymore by using ctrl+alt+f*, because it gives a message like: Starting ntpd or starting libgcrypt 1.4.4, or something in that fashion.
My belief is that something is holding the boot procedure in a waiting state before services such as ssh get to start, but I can't seem to find anything in the log files.
I thought it was in the System>administration menu somewhere, but I just can't see it. What is it called, and where do I find it please?
View 9 Replies View RelatedI run Slackware 13.1 on a small Pentium 4 box that runs a torrent client, game server, and a few more Internet-related scripts.
I see no point running these stuff with root priviledges, so I have this line in rc.local:
Code:
su user -c "/home/user/services/start-all.sh"
How secure is that command, su user -c? And what would be the right way to go with it?
After upgrade of 11.1 to 11.2 I noticed that most of the services that was started in 11.1 at boot are starting now in 11.2. I check run-level of services with
Code:
chkconfig --list
And everything is as like was before the upgrade. When I start services manually everything is OK, but on restart they do not starting.
Code:
cat /var/log/YaST2/y2logmkinitrd
Kernel image: /boot/vmlinuz-2.6.31.5-0.1-default
Initrd image: /boot/initrd-2.6.31.5-0.1-default
Root device: /dev/sda7 (mounted on / as ext3) .....
I'm trying to use Ifolder but after the splash screen, I got this error message:
Code:
Error: Cannot start the local web services.
Error: The Simias process failed to initialize.
Use the command line switch --showconsole to view the error.
[Code]....
With the advent of Ubuntu 10.04 Lucid Lynx LTS People are migrating servers to the latest LTS. One fundamental thing that has changed is the move to Upstart. In the old days to stop multidaemon service such as Samba, one would simply type /etc/init.d/samba stop and to disable it from starting on boot one would simply type update-rcd samba disable.
Now its the year 2010 and in 10.04 it seems on has to edit a bunch of files, etc. Is there not an easy tool to correctly and properly disable services on startup in 10.04 consistently? in Redhat/Mandrake 10 years ago it was simply
Code:
service smb off
In Ubuntu 10.04 its
1) edit /etc/init/smbd.conf and modify the line that says
Code:
stop on runlevel [!2345]
and change it to
[Code]...
And one has to remember all these changes when the get ready to enable the samba service in the future? This can't be right.I know I must be missing something here. or maybe overlooked something in the upstart documentation.Which seems quite sparse by the way. So the question remains. How does one simply disable a multidaemon service starting on boot such as samba. Any tool to do this ? Is the above the correct method recommended by Canonical to disable services? and enable them?
I installed MySQL and Apache2 to develop & test out the site I'm writing. However since I'll be using them purely for internal use (not exposed to the Net), I don't want them to start with every boot-up, but would like to start them manually when I desire, and stop them after use.With previous Ubuntu (Jaunty) I'd used chkconfig to configure services, but since the current version (Maverick) uses Upstart, is chkconfig still applicable?
I also installed 'bum' (Boot-Up Manager), but strangely, it displays the MySQL server as "unchecked" even though it's running (and starts at boot-up), so I cant see how I can prevent it from starting at boot-up through bum. chkconfig also displays MySQL as not active at runlevel 5, when in fact, it is.
I'd like to know what's the recommended (official) way to configure boot-up services with the Upstart system? I don't suppose directly editing the *.conf files in /etc/init is the best (or even correct) way?
I want to change the start-up sequence of services on SLES10/11.
I have my own start-up scripts for some services and I want them to start in a particular order(not in alphabetical order)
I am trying to get vmware to work in ubuntu 10.04(x64) and it just doesn't seem to work. I've made it work in debian(x64) before with the same installer but here I get errors.
installation seems to go fine with the installation script: VMware-Workstation-Full-7.0.0-203739.x86_64
But when I start it for the first time I get the message before you can run VMware, several modules must be compiled and loaded into the running kernel. and then I can press Cancel or _Install (yes with the underscore) when I press _Install it first stops the VMware Services and then says:
compiling:
-virtual machine monitor(successful)
-virtual network devide(error)
-vmware blocking filesystem(successful)
-virtual machine communication interface(error)
-vmci sockets(error)
after that it says:
Unable to start services.
See log file /tmp/vmware-root/setup-29088.log for details.
The log file:
Code:
