Ubuntu Servers :: PHP Error Reporting Doesn't Work?

Apr 5, 2011

I am developing/testing a PHP app on my netbook. For some reason apache/php are returning nothing but a "500 internal server error" response when there is a problem with my php script. For example, if there is a semicolon or closing brace missing, it should cause the script to die with a hint about which line caused the script to stop working. Instead it displays nothing but a "500 internal server error" message.

View 5 Replies


ADVERTISEMENT

Fedora Servers :: Apache Updated - Reporting 2.2.0 On Any Error Page

Sep 1, 2009

But after it updated and I restarted the service, it's reporting 2.2.0 on any error page. Yet through yum it's reporting 2.2.13-1. Is that normal? I've only ever used 2.2.x, starting with 2.2.6ish.

View 3 Replies View Related

Ubuntu Servers :: Is There Anything Better That Offers Per-user Location Reporting?

May 23, 2010

I am trying to set up SARG to provide reporting from a squid proxy server.After installing Squid & SARG, I am a little confused as to how SARG has configured itself to run.Should this conflict? Or at least create a race condition? In any event SARG and sarg-reports looks like they have not been updated in a few years.is there anything better that offers per-user location reporting?

View 1 Replies View Related

Ubuntu Servers :: Ssh Doesn't Work From Internet

May 2, 2010

I can't connect to my ssh-server (on ubuntu 10.04) from any external address. The error in putty is "connection timed out". From my internal network, everything works fine, even if I select my external IP address and port in putty as the destination.

This is what I have done so far:

installed open ssh with the ubuntu server 10.04 cd
set up port forwarding (11041) in my router (seems to work ok, port is open according to "shields up")
configured ssh to use port 11041 in /etc/ssh/sshd_config
changed tcp and udp ssh port in /etc/services to 11041
enabled UFW and did sudo ufw allow ssh

[Code].....

View 4 Replies View Related

Ubuntu Servers :: Website Doesn't Work With Www

Nov 27, 2010

I have added a domain to my new vps account but i notice that the website doesn't work with www so how can i redirect www.example.com to example.com. (bind9, apache2, webmin, ubuntu server 10.04 lts)

View 9 Replies View Related

Ubuntu Servers :: VirtualHost, Doesn't Work When Use Www

May 19, 2011

Ive made a site on my Ubuntu server and link the folder where it is with VirtualHost. The problem is, when i place mypage.com works, when try www.mypage.com goes to the apache "It Works" page.

View 4 Replies View Related

Fedora Servers :: Make PHP Pages - Shows An Internal Error 500 Page But Doesn't Show On What Line And Compile Error Encountered

Feb 1, 2011

I'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...

View 3 Replies View Related

Ubuntu Servers :: Tomcat Manager Doesn't Work?

Jul 31, 2010

I'm really new with Ubuntu and have the following problem:I installed successfully sun-java6-jdk using apt-get install sun-java6-jdk Then set up the JAVA_HOME environment variable to "/usr/lib/jvm/java-6-sun-1.6.0.20"

And then installed successfully tomcat6 using apt-get install tomcat6 apt-get install tomcat6-admin tomcat6-examples tomcat6-docs Everything seem to be right, when I try the browser with http://localhost:8080 return a webpage with "It works !" and other text

But, if I try http://localhost:8080/manager/html then returns 404 error, the error is something like "The required resource (manager/html) is not available" (that is my translation from the spanish text "El recurso requerido (/manager/html) no est disponible")

[Code]..

View 1 Replies View Related

Ubuntu Servers :: Vsftpd Doesn't Work Anymore

Nov 27, 2010

I recently installed vsftpd on my system and it was running fine for my system users. Now I wanted to add virtual users so I googled it, I found this tutorial: [URL]

I did what they've been saying over there but when I restarted the vsftpd I couldn't login with the virtual user and also not with the system user anymore. This is the error ( with the system user who could login before ):

Code:
Status:Verbinden met 109.230.234.21:21...
Status:Verbinding aangemaakt, welkomstbericht afwachten...
Antwoord:220 (vsFTPd 2.2.2)

[Code]...

View 9 Replies View Related

Ubuntu Servers :: Apache2 Alias Doesn't Work

Nov 29, 2010

I'm trying to set up 2 aliases with PHP files in it. But in both cases I get a 403 Forbidden error. This is what the /etc/apache2/conf.d/alias file looks like:

[Code]....

View 9 Replies View Related

Ubuntu Servers :: Vnc Doesn't Work Unless Monitor Is Connected

Feb 17, 2011

Last night I was able to set up my server so that I can just connect vnc. I even was able to be connected at the log on screen so I could select which user I wanted to log in at. For some reason today, I have to have the monitor plugged in all the until the logon screen comes up before vnc will connect. Once the logon screen is up, I then can connect via vnc & select which user I want to logon as. It's odd because it worked last nigh, but today - Nope nada, it doesn't work & I can't explain why. I did clean up - Removing some applications I don't need on my server. (I'm hoping that isn't the problem) It's odd as well because I don't have to be logged on as a user to connect via vnc, I just have to wait until the logon screen is available...Then I can unplugged the monitor & logon.

View 1 Replies View Related

Ubuntu Servers :: VSFTPD With NIS Environment Doesn't Work?

Apr 11, 2011

I installed Ubuntu 10.04 64bit server on DELL R710 server recently.

The basic:
[System Model] --- PowerEdge R710
[Ubuntu] ---
root@pek-mcbuild2:~# cat /proc/version
Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010
root@pek-mcbuild2:~# uname -ar

[Code]...

View 1 Replies View Related

Ubuntu Servers :: Software RAID Doesn't Work?

Jul 2, 2011

I'm trying to put two identical disks in Raid 1 for a homeserver. I got Ubuntu 11.04 server 32 bits on a USB stick. Installated till partition menu. Now I get the question how I want to partition my disks. I choose manual, and two times entire disk, one for both. It looks like this:

(iPhone quality)

I go to configure software Raid, and select Raid 1, 2 active disks, 0 spare disks, and get this:

I can't choose the other 2TB partition. I think I have to configure Raid three times, one for each partition. Not?

I click the missing 2TB partition, and get this:

But I think there's no RAID device at all, I see this again when I go to Configure Software Raid, en try to delete a RAID device:

How do I get Disk 1 and Disk 2 together in Raid 1? [URL]

View 3 Replies View Related

Ubuntu Servers :: Cgi Doesn't Work With New Apache Site Configuration?

Mar 24, 2010

I installed apache on my local machine to test my sites. I have one problem:I created a new site configuration in /etc/apache2/sites-available and enabled it. The problem is that cgi is not working, it just prints the content of the files. (The default location for cgi, /usr/lib/cgi-bin works without problem.)Here is the content of the site configuration file:

Code:
<VirtualHost *site1:80>
ServerAdmin webmaster@localhost

[code]....

View 4 Replies View Related

Ubuntu Servers :: FA120 Doesn't Work - Works In Desktop

May 24, 2010

I recently moved from Ubuntu Desktop to Ubuntu Server. I have a Dell D600 acting as a three prong firewall. I use a Netgear FA120 USB NIC for the third prong. After converting to Server, the NIC detects as Eth1. I'm able to configure an IP, but the NIC never sends or receives packets. The same NIC works great in Ubuntu Desktop. Dmesg never shows the NIC being ready.

View 3 Replies View Related

Ubuntu Servers :: Phar Stream Wrappers Doesn't Work?

Oct 16, 2010

I have a problem with phar: simply, stream wrappers doens't work. I've followed all tutorials on php.net but the error is always the same. Maybe something wrong on my ubuntu server?

Quote:

Ubuntu 10.04.1 LTS / Apache/2.2.14 (Ubuntu)

Quote:

PHP 5.3.2-1ubuntu4.5 with Suhosin-Patch (cli) (built: Sep 17 2010 13:41:55)
Copyright (c) 1997-2009 The PHP Group
Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies

[Code]....

View 4 Replies View Related

Ubuntu Servers :: Samba Folder Doesn't Work In Vista

Mar 27, 2011

I got ubuntu samba server on server 10.04 username:user1 , Home folder: /home/user1 This user connects from a macbook pro no problem. I followed the same steps to set up user2 username:user2 , Home folder: /home/user2 This user does not connect from windows vista. I have the correct ports open, 137-139 & 445, and can connect from the macintosh, but not vista. The error says that the username or password is in correct. If you need some log files or config files, just let me know where to go and they're all yours!

View 9 Replies View Related

General :: Ping In A Script Reporting An Error?

Aug 7, 2010

I am trying to run a simple piece of code but is failing on the count of the ping. I want it to report only 1 ping to my remote server and if no ping then error with a message or else the rest of the code will proceed.

Its basically telling me that my rmt server is alive and ready to take connections etc etc.

Heres the code:

Quote:

DATE=`date +%Y/%m/%d`
TIME=`date |awk '{print $4}'`
RMT_HOST=Zeus
COUNT=1

[Code]....

It's complaining about the count number I think.. but for the life of me cannot work out why.

View 16 Replies View Related

Ubuntu Servers :: Lmsensors Snmp Doesn't Work After Dist-upgrade

May 5, 2010

I have a small problem with lmsensors and snmp since I upgraded my small server from 9.10 to 10.04. I use cacti to monitor my servers usage, disk space as well as temps and fans.
This was running very fine before the upgrade, but now I don't get data anymore from lmsensors. It seems that SNMP doesn't give this information as before. (Cacti log says: "No sensor data was returned from SNMP")

sensors give the following output:

Code:

w83627dhg-isa-0290
Adapter: ISA adapter
Vcore: +1.12 V (min = +0.00 V, max = +1.74 V)
AVCC: +3.41 V (min = +2.98 V, max = +3.63 V)

[code]....

View 3 Replies View Related

Ubuntu Servers :: Send Mail Doesn't Postfix SASL Work

Nov 27, 2010

I'm running a server with Ubuntu 10.04 and I have installed postfix and courier. The server can recieve mail and I can fetch them using POP, but when I try to send mail it doesn't work. Postfix itself can send email if i telnet from localhost and I am using my ISP as a relay because they block port 25. I'm using outlook 2007 on my client computer and it just says that the server rejects the login attempt and tells me to check my username and password. Postfix listens on port 12 as well because the client connection also has outgoing on port 25 blocked. I have tried to use telnet to connect to the server, and I can connect. This is what I get:

[Code]....

Now what? I've tried searching for the answer but all I can come up with is AUTH PLAIN or AUTH LOGIN, but I don't know what to type after that.

View 2 Replies View Related

Fedora Servers :: Can't Use Tftp \ Remotely It Doesn't Work?

Jul 29, 2009

Server: CentosClient: F11Remotely it doesn't work

Code:
tftp 10.0.0.2
tftp> status

[code]....

View 4 Replies View Related

Fedora Servers :: Sshd Within Xinetd Doesn't Work

Aug 21, 2010

I recently installed Fedora 13 on VMware 7 environment without X window. sshd did work fine, but when I tried to put it into xinetd, it doesn't work any more. Here is what I have done so far :

I stopped sshd. #service sshd stop

and I configured xinetd.conf like below.

Quote:

#
# This is the master xinetd configuration file. Settings in the
# default section will be inherited by all service configurations
# unless explicitly overridden in the service configuration. See
# xinetd.conf in the man pages for a more detailed explanation of
# these attributes.

[Code]....

I don't know what I did wrong with them. I configured xinetd.conf, and I made service configuration file 'ssh' in /etc/xinetd.d, and I restarted xinetd.

What am I supposed to do to make a life on my sshd within xinetd ?

View 1 Replies View Related

Ubuntu :: Update Grub Doesn't Work - Error

Jan 21, 2010

i was updating my grub.cfg, by running sudo update-grub, i get a lot of errors:

[code]...

how do i make it so it can open /dev/sdf and ge it's disk size so my grub will update correctly?

View 6 Replies View Related

Ubuntu Servers :: Created A New Virtual Host In Apache Using Webmin - Doesn't Work ?

Nov 14, 2010

I created a new virtual host in Apache using Webmin and am having trouble getting it to work. When I created it, I opted to create the config file as a "New file under virtual servers directory /etc/apache2/sites-available". So now I have a default config file /etc/apache2/sites-available/default and a new one created by Webmin at /etc/apache2/sites-available/webmin.1412323.conf. It seems like the settings in that new Webmin config file aren't being picked up by Apache -- when I try and browse to mywebsite.com it shows my root /var/www folder, not the subdirectory /var/www/mywebsite.

Is there a way I can tell Apache to include the new Webmin config file for the virtual host or should I just copy the directives into the default file at /etc/apache2/sites-available/default? It seems like Webmin should automatically configure Apache to work with any newly generated config files.

View 4 Replies View Related

Ubuntu Servers :: Bind9 Views - Reverse Lookup Zone Doesn't Work ?

Apr 1, 2011

I'm at a loss to why my reverse lookup zone doesn't work for me.I've got two views. One internal and one external. My domain is isp2.datornatverk.se. Public IP: 130.240.133.81.

dig -x @8.8.8.8 130.240.133.81

gives me:

;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 2917
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0

I've set it up so that the internal subnets gets the domains resolved to the internal IP-addresses. When querying from external addresses I will get public IP.My named.conf.local file:

Code:
acl internals {
127.0.0.0/8;[code]..........

I don't know whether the views has messed something up. It worked before I added the views.

View 3 Replies View Related

Fedora Servers :: DYNDNS Changed Public Key - Now Scp Doesn't Work

Apr 9, 2010

A week ago or so neither ssh nor scp were working when attempting to connect to my on-campus computer from home. ssh was complainig about the key not matching and I figured out I could just delete the config file it was reading the (now old) key from and let it create a new one with the updated key upon prompting me whether or not to trust the remote host.

However, even though ssh is now working, I can no longer use scp. I issued scp -v and discovered a bunch of errors. scp prompts me for the remote password and even prints the message of the day on the remote computer but then just hangs and doesn't seem to be copying any files. I'm sure the issue is with the whole key change issue but I can't quite figure out why ssh would be working just fine and scp would be failing.

View 1 Replies View Related

Fedora Servers :: Welcome Page When Codeigniter Works But It Doesn't Work

Oct 27, 2010

the codeigniter didn't work in my Fedora,the welcome page,when your codeigniter works,it will shows,but it doesn't appear.the same step,it can work in Windows. What's the problem?

View 4 Replies View Related

General :: Crontab Mysqldump Error Mail / Reporting That Backup Is Not Working?

Jan 22, 2010

if I run mysqldump from crontab and error occurs, I would like to have email send to me (reporting that backup is not working).

View 2 Replies View Related

Fedora Servers :: Firefox Doesn't Display PHP Error / Fix It?

Jul 29, 2010

When i open the Browser FireFox and enter the URL http://localhost/TemplateSystemCore/bin/index.php no PHP Errors will be displayed. If i do Right Click View Source Code it is total empty.

I am using Netbeans to edit a PHP Project. The Project is located in /home/martin/NetBeansProjects/TemplateSystemCore btw. /home/martin/NetBeansProjects/TemplateSystemCore/bin

The Project is usein a .htaccess file with Rewrite Rules.

I edited the php.ini and set all display errors to On.
I also edided the http.conf and set display errors On. But nothing helped. Have anyone a Idea why my Brwoser isnt printing any PHP Errors? At least a <html> Tag should be on the Source Code. But its also empty.

When i open an Terminal and do this code...

View 2 Replies View Related

Software :: Flash Plugin Doesn't Work - Error Installing VLC

Sep 19, 2010

i installed the adobe flash plugin (for linux) following adobe's instructions (download, decompress, and copy the correct ".so" to the plugins directory).

however, the plugin is not detected by either videos or firefox (checked using "aboutlugins"). something must be wrong with adobe's plugin version 10.x!

i want to try a firefox extension called "download videos videos as mp4 and flv," which rewrites the videos pages to include a download button which allows you to directly download the video in mp4. however, it requires vlc media player on linux.

i have slackware, and followed the instructions on this page [url] to use the slackbuild from alienbob. i set require_yasm=no.

however, the build produces the errors below (it tries to build with yasm, and it doesn't find "libvpx.a"):

code:

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved