I created a script
Code:
#!/bin/sh
bla bla bla
I know if I put it in
Code:
/etc/cron.daily
it will be executed every day at 12:01, or I am not sure the hour
But I want to be executed every monday and saturday at 20:00h
I recently decided to try KDE4 and would like the change the clock on the panel to display 12 hour format and not the default 24hour format but i can not find where to change this option currently the clock looks like the attached picture. Gnome has this option and I would like to see it in KDE if it exists in the default clock. I am willing to replace the default KDE clock with a seperate widget if one exists for this.
View 1 Replies View RelatedI use Slackware64 13.1 and this Sunday the hour change and ntp daemon don't start automatically and my clock is an hour late. It's normal or a bug?
View 20 Replies View RelatedI need to change the time displayed in the task bar from a 24 hour clock to a 12 hour format. I could not find the relevant settings in OpenSuse 11.2 and same is the case for 11.3 as well.
how to make the change? I have tried System Settings ---> Computer Administration ---> Date & Time; but I was not able to make the desired change.
Similarly, I have a digital clock widget that shows GMT + 5.5 hours and I need to change that to 12 hour format as well.
I just switched over to Lubuntu, and so far, it's been great.It's rendering quite well with my laptop, even though the fan is constantly running.I've had some small annoyances that I haven't been able to figure out. How do I get the power button and/or other related actions to the 'start' menu? Is there a way to drag and drop applets like in Ubuntu? How do I setup default brightness like in Ubuntu? How do I change the time to normal US time (12 hour instead of 24 hour)How do I change the time to a 12-hour instead of 24-hour?Is there a software center?
View 2 Replies View RelatedAfter daylight savings time, my squeeze installation's clock failed to adjust. I've tried to change this in the bios, but it always resets itself.
Is there a way to force-change the time?
I have a script that I want to run for one hour.
I used to use doalarm to make it run for one hour then stop but it is not working consistently so I need another solution.
How would you make a script run for one hour then stop?
I wish to run a cron job every half hour, where exactly do I put the job? The reason I am asking is that I am used to entering jobs into crontab, I am not used to using fedora and its cron layout.
View 2 Replies View RelatedI'm running a fully updated Fedora 15.In Evolution's calendar, my days are limited to 12 hours: from 0:00 to 11:45, always.Under preferences->Calendar and Tasks->General, I have "day begins" as 07:00, and "day ends" as 23:30. Changing these numbers has no effect whatsoever. Selecting "12 hour" under "time format" also does nothing.I REALLY hope this isn't a deliberate change by the Evolution developers. My days have normally consisted of more than 12 hours since I was three or four (I'd have to call my parents to ask). Jokes aside, what's going on and how do I change this?
View 3 Replies View RelatedI have an indexer for sphinx, and i want it to run once every hour in linux. How would i do this?
View 8 Replies View RelatedNo clue how to change the 24 hour clock format in Lubuntu 10.04 Beta.
View 6 Replies View RelatedI have a python script that I would like to run every hour regardless of whether I am logged in. I have tried putting a link to the script in cron.hourly, however, it does not run.
View 9 Replies View Relatedwhy did i have every time a black screen after 1 hour and can do nothing any more. But the music that play with rhytmbox is playing good.No energy saving only screen saver that must be active after 10 min non activitie on pc
View 3 Replies View RelatedI found (Red Hat Fedora Core 6 Server) a CRON entry for "backupmng" that has repeats at 1,16,31 and 46 minutes every hour of every day, 24/7.It is located at:/usr/local/psa/admin/sbin/backupmng >/dev/null 2>&1.
View 1 Replies View RelatedCurrently whenever i run date command output is shown like
Mon Apr 12 05:17:21 IST 2010
When its 17:17 Here.
How would i change it so that it should show.
Mon Apr 12 17:17:21 IST 2010
Yesterday I configured an NTP Server, and synched a sever with my NTP Server. Now some how my Client clock jumped one hour ahead at 12:00 AM, while HW Clock and NTP Server Clock remained.
Code:
cat /etc/sysconfig/clock
# The ZONE parameter is only evaluated by system-config-date.
# The timezone of the system is defined by the contents of /etc/localtime.
ZONE="Asia/Karachi"
[Code]....
I need to build a system that can provide me capacity to send more than 50.000 mails per hour. Now I have inherit a server farm with 40 postfix servers, and one server managing which of this servers send the mails but its programming for someone but it's too complex. I would like to have a new system for do that, (To manage hotmails, Yahoo and others complains i have a contract with a specialist company to have ours ips in whitelist, activate and deactivate servers )
View 8 Replies View RelatedDo you like programming? Can you take challenges? Would you match yourself with others? Here is your chance! Grab it! The jubilee X. BME International 24-hour Programming Contest will be held this year in May!
This contest is a real test of creativity, knowledge, endurance and team-work, an EXTREME CHALLENGE! Sponsors and the offered prizes worth 6000 euros contribute to the high standards of the contest. The team which gaines the utmost points can take home the award and the cup.[URL]..
I'm experiencing a problem with cron.hourly running mcelog.cron on Fedora 11:Quote:mcelog: warning: 18446744073709551600 bytes ignored in each recordmcelog: consider an updateI've read a dead end email thread here from February 2010 describing what I am seeing on Fedora here:Does anyone have any insight into this problem? This is relevant portion of strace(1)ing mcelog which shows /dev/mcelog is open()d and configured correctly:Quote:
open("/dev/mcelog", O_RDONLY) = 3
ioctl(3, MTRRIOC_SET_ENTRY, 0x7fff13129bac) = 0
ioctl(3, MTRRIOC_DEL_ENTRY, 0x7fff13129ba8) = 0
[code]...
Is there any way to force 24-hour time in my locale (for example, 14:00) instead of 12-hour time (2:00 PM)?
I use the en_US locale with a UTF-8 character set on Arch Linux, but this shouldn't matter, I think.
My internet disconnect mabe every second hour and I have to restart the Ubuntu to get internet again. This started to happen when I bought a new wireless card called NETGEAR WG311v3. The live CD didnt have the drivers for it so I had to download XP drivers and install it with ndisrwapper.
So my question is how do I fix it? Do other network drivers crash with my current one? If so how can I see wish one to remove?
Note that my card works fine with XP on same computer.
Installed Lucid netbook-remix on my Aspire One with SSD and 3 cell battery last night. Under 9.10 I got 2hr 15mins with wifi and up to 3hr without wifi. This morning on the train to work I booted the new release only to find that without wifi I'm now getting only 1hr 20mins battery life (fully charged battery). I have the brightness turned down low to try and save a little power but it makes no difference. What can I do. As this is a netbook-remix release having just over an hour of battery life is plain awful and impractical.Any suggestions to increase battery life?
View 9 Replies View RelatedRecently moved into amazon's ec2 cloud and noticed our server time was in UTC where we use EST. I did some looking around, and changed using the following;
Followed up setting the correct time using the date command with the correct time, then date showed;
Now, that is correct, but if I do an ntpdate pool.time.org or any other time server, the offset is huge and the date moves back one hour. Is this a daylight settings or something I am just missing?
i have file server 1 (filesvr01acess.log) and disc server 1 (discsvr01acess.log) in unix box(say ip adress of the box 10.39.66.81)
Similiarly i have file server 2 (filesvr01acess.log) and disc server 2(discsvr01acess.log) in unix box(say ip adress of the box 10.39.66.82). Now my requirement is write sheel script for ..
1. I need only last 24 hour data out of the file server 1 and file server 2 and then finaly put this data in one new file
2. Similiarly same need for discserver 1 and discserver 2.
FYI, each .log files mentioned above is nicely order as date and time as it is created. I can view through cat or search by using grep comand in unix I am wondering if we can achieve through grep command in unix
I would like to detect that with openbox (i avoid xscreensaver) and do manually xset dpms off for the screen.
View 3 Replies View RelatedI was wondering if any one came across that issue before. Everytime I reboot my PC something (I assume GNOME) reset my system clock to an hour behind what is was the last time. So if a reboot twice in a row that'll be two hours behind and so on. It used to work fine until I had to change my system time backward temporally to overcome and issue with GPG. Since I put it back I get that phenomena. It's like it's adjusting it for the Day light saving everytime a boot. Problem is Japan does not have any day light saving. I run OpenSuse 11.2 with Gnome 2.28.2 as my interface. I'm currently located in Japan GMT+9 not DST. /etc/localtime -> /usr/share/zoneinfo/Asia/Tokyo
I suspect a bug in Gnome or Yast. It's not user specific because the time is already altered even before I log it.
I am newbie in Linux using Mint 9 Isadora. I am flooded with UFW messages. I would like to how to interpret these messages. I am a bit scared..
View 3 Replies View RelatedI manage an Apache 2.2.3 web server. It stops working several times an hour, so I removed the semaphores and restarted it as a workaround, but I dont know what is causing this. Lately i've noticed that the workaround is not working at all.
Code:
0 */1 * * * /usr/bin/ipcs -s | grep apache | perl -e 'while (<STDIN>) { @a=split(/s+/); print `ipcrm sem $a[1]`}'
0 */1 * * * /sbin/service httpd restart 1>/dev/null
Below is what I can see in my error_log file.
What is the mutex message telling me. To be honest, I don't know much about semaphores nor how they work. You can see after the semaphore issue, that Apache is sent the SIGTERM signal. I have seen other posts on this topic, but not explicitly with Linux 2.6.22 and Apache 2.2.3 with a description of the issue and a permanent fix.
Code:
[Fri May 27 22:00:04 2011] [emerg] (43)Identifier removed: couldn't grab the accept mutex
[Fri May 27 22:00:04 2011] [emerg] (43)Identifier removed: couldn't grab the accept mutex
[Fri May 27 22:00:04 2011] [emerg] (43)Identifier removed: couldn't grab the accept mutex
[Fri May 27 22:00:04 2011] [emerg] (43)Identifier removed: couldn't grab the accept mutex
[Fri May 27 22:00:04 2011] [emerg] (43)Identifier removed: couldn't grab the accept mutex
[Fri May 27 22:00:04 2011] [emerg] (43)Identifier removed: couldn't grab the accept mutex
[Code]...
i cannot find it in the man. Is it possible to run cron job like this:
Run script from 18 00 till 5 00?
I want to run some script but only during the night time, when users are not working.
I need to build a system that can provide me capacity to send more than 50.000 mails per hour. Now I have inherit a server farm with 40 postfix servers, and one server managing which of this servers send the mails but its programming for someone but it's too complex.
(To manage hotmails, Yahoo and others complains i have a contract with a specialist company to have ours ips in whitelist, activate and deactivate servers)