I've tried a number of times today to update and get the report that a connection with RPM fusion free cannot be established.
Has it been frozen?
I've tried updating via terminal and yum update.
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
I just switched from Ubuntu to Fedora 13 because I was unable to get Ubuntu to connect to wireless networks. I tried everything suggested in help and forums, and kept getting "Bad Password" with WICD and Network Manager. Now, with Fedora...I still can't connect.
Problem #1: The guide says to "...make sure that the relevant wireless interface (usually eth0 or eth1) is controlled by NetworkManager," and that I do this via: System>Administration>Network
However, there is no Network option under System>Administration.
Problem #2: I open Network Manager, which displays a list of networks. I click on mine, configure it with WPA and the right password, and it fails to connect: "The network connection has been disconnected."
I'm facing a problem with 'ssh'. In my lan environment i've configured a system with fc12 and one more system with fc9. When i'm trying to login through ssh from fc9 to fc12 it's working, but at the same time if i'm trying to login through ssh from fc12 to fc9 it's not working. I was getting the error "connection closed by remote host"can any one suggest me how to recover this.
View 10 Replies View RelatedJust installed Fedora 13 (64-bit). Brand new to Linux and not much of a computer expert.
As the subject line says, I am unable to connect to the Internet.
Things that I have already tried based on threads posted for similar problems:
* ping -c 5 www.google.com
unknown host www.google.com
* ping -c 5 74.125.159.105
Network is unreachable
I connect to the Internet via wired ethernet. The modem/gateway is 2Wire mod. 2701HG-B. Service provider is AT&T DSL. Ethernet controller is Realtek Semiconductor RTL8111/81688 PCI Express Gigabit Ethernet. When I go to System -> Administration -> Network Device Control it shows eth0 as inactive.
Network Configuration shows:
* Hostname: localhost.localdomain
* Primary/Secondary/Tertiary DNS: blank
* DNS Search Path: blank
I have no problem whatsoever connecting to the Internet when using Windows XP.
I'm trying to connect via ssh from a remote to a local machine.The local machine is connect to the ISP thru a wireless router. I know the ip address of the local machine from myaddress.com. The local machine is running sshd. I can ssh from the local machine to the remote, but I'm unable to ssh from the remote to the local. I know the local machine has not yet changed its port number.
View 3 Replies View Relatedafter installing Fedora 15, Firefox is said unable to access internet.The firewall is set up with the wizard button and I unchecked the "stay offline" box.The computer is in dual boot with Win7, where Firefox is working,thus it's not a connection issue.So does anyone know if there is something to set up in order to make Firefox work in Fedora?
View 2 Replies View RelatedI've been using 3 different distros for the last 2 weeks. Ubuntu, Fedora and Mint. And i've been using Windows since I can remember. I won't talk here about the benefits I got with Linux, because everyone knows that. But there's something about Linux that keeps annoying me, no offence to Linux users, and I want to ask you about that.
It just seems impossible to install additional software without an Internet connection. I tried: Keryx, Opyum, Suhi,huh?, Synaptics generate download script, yum -downloadonly. I didn't yet: Debian 10DVD I'm not programmer, and my knowledge about computers and operative systems is very small. But installing software on Windows the worst case of dependencies i saw was I had to download just one more .exe file (.NET framework or klite codec pack installers, for example).
question: Is there any Linux distro or any way where packages are managed in a more compact fashion? Suppose I want to use Wine, how I download some megapackage with ALL dependencies or something like that? How system administrators manage where no Internet connection at all (if that possible)?
I have installed Fedora 10 on my Intel system. I am not able to connect to internet from it. Mine is a broadband connection with ADSL+2 modem. I could connect once but afterwards it was deactivated and I got following bug report.
Component: system-config-network
Version: 1.5.93
Summary: TBd036c2a6 re.py:237:_compile:TypeError: first argument must be string or compiled pattern
Traceback (most recent call last):
File "/usr/share/system-config-network/netconfpkg/gui/tonline.py", line 79, in on_generic_entry_insert_text
if re.match(str, text):
File "/usr/lib/python2.5/re.py", line 137, in match
[Code]...
I have recently Installed Fedora 11. I have installed postgres like yum install postgresql but I wonder there is no user created for postgres when I tried su postgres system says, no identity for user postgres. even when I tried to connect postgres server using psql then it says
Code:
psql: could not connect to server: No such file or directory
Is the server running locally and accepting connections on Unix domain socket "/tmp/.s.PGSQL.5432"?
I'm trying to connect to url, but the browser is unable to connect to the localhost; my OS is F11, if someone have encounter this problem? i was able to connect to the localhost when i had F6 OS.?
View 3 Replies View RelatedWhen I try to connect to any Wireless Networks in Fedora, the option at the top of the screen is grayed out. I can only connect to VPN, a hidden network, or create a new wireless network. My wireless works fine on the Vista side, so I am a bit confused at this
View 5 Replies View RelatedI'm trying to record video of a game I am playing. I am using gtk-recordmydesktop but it records the audio from my mic. This is obviously not what I want. The apparent solution was jack, but I've been having a hard time getting it to run. According to #fedora I was told to get qjackctl and jack capture. When I try to run qjackctl and click the "start" button I get this long nasty error:
Code:
15:11:41.006 Patchbay deactivated.
15:11:41.008 Statistics reset.
15:11:41.024 ALSA connection graph change.
15:11:41.240 ALSA connection change.
15:11:42.091 Startup script...
15:11:42.091 artsshell -q terminate
15:11:42.532 Startup script terminated with exit status=256.
15:11:42.533 JACK is starting...
15:11:42.533 /usr/bin/jackd -R -dalsa -dhw:0 -r48000 -p1024 -n2
15:11:42.538 JACK was started with PID=4302.
*** buffer overflow detected ***: /usr/bin/jackd terminated .....
15:11:42.589 JACK has crashed.
jackd: no process killed
15:11:43.015 Post-shutdown script terminated with exit status=256.
15:11:44.683 Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.
I am not able to connect to network after update F13 to 2.6.34.7-61. Because there is "no netwokr decvice" IAW network manager. There is nothing in system log that abonormal. But, there is a fail initialization in the boot message. "applying firewall rules: iptable v1.4.7:Ip6table-restore: unable to initialize table .filter error occur at line 3 try Ip6table-restore -h or Ip6table-restore -help for more detail"
so, I tried the comment at terminal with root clearance, it just give some feed back about how to use this command. When I tried out other options. none of them work. There is no feed back form the terminal other than previous display and blanking cusor.
I assume it was the firewall preventding me to connect to network. And I complete disable SELinux and reboot. Problem remain, no network device. Check network device driver. There all inplace. Tried using old kernel, unble to boot up X window, presumably old driver has been deleted.
BTW, after two consecutive update failure (2.6.34.7-54 kernel panic VFS? problem, 2.6.34.7-61 no network connection), I assume Fedora Quality should consider review their update release process. Since the probability of fedora releasing bad update is increase a lot after fedora 11.
I am trying to connect to Internet via 3g Datacard in F15 and Its not getting connected.
View 2 Replies View RelatedI am using windowsxp in one pc and another running on fedora 11,,, i develop socket based applications which run on fedora linux. But i need to test these applications with a software running on windows xp. i found that i could not connect to socket of the application running on fedora from an application running on windows. i am not able to identify the problem. should i try any other linux distribution?
View 4 Replies View RelatedI am not able to connect to server through putty, my collegue is able to connect to same server from his desktop through putty.
I am getting ssh session and after providing user id an password its stays still and no error message. firewall and se linux is disabled and also i checked tcpwrappers there is not restriction given.
We are using Real VNC enterprise server. User will connect to the vnc server and do their work. We are facing one issue since from last week. When user is working on session, some times the session will get hung.He can't do anything on that. If he close the connection and try to connect from vnc viewer to the same vnc session it is not connecting. even it is not asking for the password. I have checked in the server the Xvnc process for the session is still running. When I tried to check the session is alive or not from telnet it is not showing that RFB 004.001.
xhdvnc2 ~]# telnet localhost 5902
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
If users are running some important tasks on that session they are not able to access. We are using RHEL 4U7 .
O currently have 2 USB WiFi adaptors: a Linksys WUSB54G v4 and a D-Link DWA-110. Both these USB adaptors worked extremely well in Windows: they could connect to any network: unsecured, WEP and WPA1/2I have tested these adaptors in DreamLinux, OpenSUSE and Mandriva: in these 3 distributions, i could use both adaptors to connect to my home's WPA2 network.Both adaptors also work well in Fedora 10.In Fedora 11 Alpha though, its a different thing: only the D-Link is able to connect to the home WPA2 network. My Linksys WUSB54Gv4 can 'see' the network, but when i enter in the WPA2 key, it takes forever to try to negotiate a connection before timing out and disconnecting.
View 3 Replies View RelatedI have been synchronizing my Nokia E71 with KDE-PIM on F11 for several months, using msynctool (opensync 0.22) and connecting through an usb cable.
I'm trying now to migrate to F12 but my Nokia E71 doesn't connect.
This is the operating sequence:
msynctool --sync kdepim-e71
Synchronizing group "kdepim-e71"
Member 1 of type kdepim-sync just connected
[Code].....
Install Fedora 12 on my laptop and having problem connecting to access point using WEP . I complied with wireless setup with key but will not connect. Works with security disable, the router is a Westell 327W from what was Bellsouth.
View 1 Replies View RelatedAm new, as of today to Fedora. I am unable to connect to my home wireless network. I have checked the security settings WPA PSK Personal TKIS, on the router. I have two windows PCs that are connected in this way.
The error message in Fedora 15 Network is Authentication required by wireless network. The details I have entered are correct, but no joy. Again, I am entirely new to Fedora
When ever i try to login to my ftp server(linux, fedora) through filezilla or cuteftp then its giving error even if login details are correct. Its are working fine locally but remotelly its giving error when ever i try to connect to it using external ipaddres or domainname. the error is as follows Status:
Connected with [URL]. Waiting for welcome message...
Status:Connecting to host1.domain.com ...
Response:220 (vsFTPd 2.0.5)
Command:USER test
But if i try to connect to ftp server via brower(internet explorer or mozilla). ITs working fine.I dont know what is the reson behind this. few days back it was working fine through filezilla or cuteftp. proxy setting are also fine. its the same which i was using few days back.
I use Windows7 on my laptop. I have got the following version of VMware Server installed on it.
**VMware Infrastructure Web Access Version 2.0.0 Build 122589**
**VMware Server Version 2.0.0 Build 122956**
I am running Fedora Core 10 on VMware, but Fedora is not able to connect to the Internet. However, when I try to ping google.com, it works fine. However, if I try to open google.com in mozilla-firefox, it gets stuck at "Connecting to google.com" and then finally times out. Similarly, yum also gets stuck.
Logs
[root@prats ~]# ifconfig .....
[Errno 4] IOError: <urlopen error (101, 'Network is unreachable')>
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again
You have mail in /var/spool/mail/root
[root@prats ~]#
// Prats
I installed pidgin 2.6.6 on fedora 13 and setup as following:
protocol: yahoo
pager server : scsa.msg.yahoo.com
port: 5050
file transfer server: filetransfer.msg.yahoo.com
file transfer port: 80
proxy: Use GNOME Proxy Setting
But I received the error:
Unable to connect to Yahoo
I tried the previous post about connecting to 66.163.181.166 or changed port but still didn't work.
However I have another computer with linux FC4 and the pidgin 2.6.2 installed on FC 4 with same configuration works.
I have just got my network to work on Fedora, and now I have run into an new problem... I can't access any shared files or printers. The computer that has the printer and the files I want to access runs windows XP Home edition, and when I boot into XP on my machine, I can access the files and printer. Can this be fixed, or is Fedora incompatable with Windows XP in this case?
View 6 Replies View RelatedTrying to setup Samba for the first time and am unable to connect to the share from my Windows machine. It is a very basic setup, just trying to setup a single share to use a backup location for my windows files.
I've done the following:
1. Fresh install if fedora 15
2. installed samba
rpm -qa | grep samba
gives the following:
[Code].....
3. Used samba server configuration to setup the share and create the samba users
4. When I tried to connect from my windows machine I get the error that the server is not accessible, you might not have permission to use this network resource or I get the error "windows cannot access server, check spelling and try again.
Both computers can ping each other. I opened samba ports in the linux firewall and tried to connect again: same error Disabled firewall all together and have the same error. Here is the output from the testparm command
[Code].....
i have installed fedora 15(lovelock) on my lenovo z560 ideapad laptop. in fedora 15 lovelock internet is not working by wire or wireless. Network controller: Broadcom Corporation BCM4322 803.11a/b/g/n Wireless LAN Controller (rev 01)
[amit@localhost ~]$ ifconfig
em2 Link encap:Ethernet HWaddr 88:AE:1D:274:45
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code].....
I installed FC10, and configured everything to work with my static IP address [URL]. As far as email goes everything works except for the php script on my website. This script worked fine on my previous install, and it appears to actually submit the email as shown in the maillog:
Aug 12 14:21:02 myhome postfix/pickup[27581]: 37406BFDD9: uid=48 from=<apache>
Aug 12 14:21:02 myhome postfix/cleanup[27783]: 37406BFDD9: message-id=<20090812192102.37406BFDD9@www.myhome.com>
[code]....
I also created the following php script to test
<?
(mail ("test@myhome","Test message","this is a test"))
?>
And I was able to send successfully with this script with the only difference being it was sent by root rather than apache. This leads me to believe it's some sort of rights issue with the apache user. I wouldn't be surprised is SELinux was behind it all. I spent days and days after installing wordpress trying to get it to connect to mysql, and that turned out to be a SELinux issue.
I am having problems accessing my work desktop through my home computer running Fedora 13. I am able to remote into work through MAC and Windows XP. I loaded vpnc and was able to connect to the concentrator. I also able to ping it too. I cannot connect to my desktop using rdesktop. I get error message �Unable to connect, socket is unavailable. I cannot ping to the desktop.
View 2 Replies View Related