Fedora :: Possible To Have A Terminal Window Be Transparent On KDE Desktop?
Jun 15, 2010Is it possible to have a terminal window be transparent on the KDE desktop? The operating system is the Fedora Core 13 distro.
View 4 RepliesIs it possible to have a terminal window be transparent on the KDE desktop? The operating system is the Fedora Core 13 distro.
View 4 Repliesif there was an easy way to get a transparent terminal window. I am running Fedora Core 11 in Gnome desktop. I am sort of a newby and i am really getting into Linux but i want to know some of the cool features too.
View 4 Replies View RelatedIs it possible to make terminal (xfce4-terminal) transparent from bash script?
Maybe by enabling compostion?
I would like to display a fully opaque image (e.g. PNG RGB8) on the desktop in an image viewer - but such that I can set the window (showing the image) to be, say, 50% transparent (so I could see through and compare with other windows below). It would be even better if the viewer just shows a "panel" instead of a "window" (i.e. I'd prefer just the image shown, possibly with a border - instead of a full blown window with menubar, titlebar etc).
I'm aware that in Compiz, it should be possible to run a plugin, and have any window you want transparent - but I was hoping for a solution (viewer) that would not be Compiz-specific (and even more preferred, if it is neither Gnome nor KDE specific - but I'm not sure that is possible).
How to create transparent window for ubuntu os? Is there any function or code in c++ for the same?
View 1 Replies View RelatedI've installed MythTv on my Ubuntu 10.04 computer. I can scan for channels, but when i select Watch TV the window becomes transparent and freezes.
View 6 Replies View Relatedi want to know a couple of things
1) how can i set my terminal's background completely transparent like opensuse and not just show desktop wallpaper.
2) how can i set its default height and width from 80x24 to 80x38.
debain 6.0 gnome.
On some themes (like dust sand) the terminal goes transparent. I checked the profile, and it has a solid color settings, so this must have been changed from somewhere else and I can't get rid of the stupid transparency.
View 4 Replies View RelatedI am trying to figure out how to make my terminal emulator dynamically transparent ( see through to the action below that window - Browser, video et cettera and not just the default wallpaper) . I figured out how to make transparent but not "dynamic". I have seen people mentioned you need to enable compositing but I am unsure how to do that in Gnome. I recall from a prior use of XFCE this was an option in that WM but I can't find in Gnome or compiz (if needed)
I am running Gnome on Debian Squeeze and have installed compiz. Any direction would be appreciated. I find reading web tutorials through the terminal to be very helpful so I can practice the command line or even practice commands while watching a good video .
Have installed fedora core 10 [kernel 2.6.27.24-170.2.68.fc10.i686 on intel core 2 Duo machine all disks encrypted. When I try to obtain a terminal window from run level 5 (KDE desktop environment) I get a bouncy terminal icon that disappears after about 15-20 seconds. No terminal window. The only way to get a command line is to press ctrl-alt-F2 and return to runlevel 3. How do I get a functional command line in runlevel 5?
View 6 Replies View RelatedI have a working trans.ds file and installed devilspie.It runs great, but the stickler is that if I "click off" or change application focus, I no longer can get the focus back to the terminal.The terminal window is responsive other than that.I can open a new tab, but I get no focus there either.Here's the trans.ds code
Code:
; generated_rule trans
( if
[code]....
Does anyone know how to set the background of a terminal to be an image, and not have it slightly transparent? I've set an image as my Terminal background, but now when I open a terminal over other applications I can see those applications through my Terminal background. Is there any way to stop this from happening?
View 9 Replies View Relatedi'm not sure for using the correct channel here but i hope someone out there can answer my little questions. 1st in older version i was able to change the settings of the terminal look as the font color, background color and so on. I was also able to define a default window size of a new terminal window. But since after upgrading to to the first release this year and a complete new installation of the current release Maverick i do not find this option anymore. Is there a way how to set up the terminal default window size?
View 9 Replies View RelatedNewly installed Debian system from years with Fedora. Ran system update and system got hosed, booted but no Gnome. Got Gnome back after MANY 'aptitude upgrade's. Xemacs disappeared! Along with other things I installed. Tried to install Xemacs but it is broken and will not install, complains about dpkg TOO current(?). So downloaded Xemacs for Xemacs.org and compiled source, installed.
Now when I start Xemacs is does not run in an X window but runs emacs in a terminal window. If I run it from a script, it complains about 'not in tty window'.
My env show:
Code:
The Xemacs install on Debian ( Bug written ) Install and configuration of Xemacs from source. A better understanding of the Debian upgrade process.
I have just installed 9.1 and I like to use a semi-transparent terminal so i can see text under it, but on Karmic, it shows the desktop background underneath.
View 3 Replies View RelatedI have problem with internet connection on my Ubuntu, but the major problem is that i can't copy the message from my terminal while I type:ifgonfig and paste it here to show you what is the problem.
View 9 Replies View RelatedI am new to Samba.I'm running Fedora 10 and I've just download samba successfully and have the smb service running on my system.I'm in GNOME and select System and then Administration and Samba does not appear in the drop down menu.I have an NFS menu selection but no samba selection.I ran yum install and it installed successfully. If I can't get the samba config window is there a way I can configure in terminal window?
View 1 Replies View RelatedWhat is the command for "Open a terminal window and run application in this terminal
View 4 Replies View RelatedI can't seem to get rid of this ghost window on my desktop. Whatever it is, it makes it unable to move the Desktop Folder around also. Easy fix I'm hoping?
View 3 Replies View RelatedI am able to invoke 'skype' using the following command in a Terminal window. < export XLIB_SKIP_ARGB_VISUALS=1 && LD_PRELOAD=/usr/lib/libv4l/v4l2convert.so && skype & >. I want to be able to enter it through the Gnome Application interface. I right click on the skype icon and went to properties and added the above code. When I click the icon I get the following error message set out on the attachment? properly enter the commands within the application Command: line?
View 2 Replies View RelatedI had a friend load Ubuntu on my PC. Everything work pretty well except i cant use the effects like rain, fire, wobbly window or drag my window into another one of my desktop. My comp has Radeon HD3100 Graphics card in it. Is there any graphics drivers I can dl to make the stuff work.
View 3 Replies View RelatedWith kde I can configure windows to "force" them always open in a specific desktop. I set firefox to open in desktop 1, openoffice in desktop 2, amsn in 3 and konsole in desktop 4.How can I do the same in Gnome?I'm using gnome 2.30 on Fedora 13.
View 2 Replies View RelatedI find xcompmgr more than adequate for making a desktop look pretty modern, and I don't like the more extravagentCompiz gimmicks - but there is one thing that irritates when using xcompmgr which someone here might have worked round.
Rounded window borders don't draw and redraw properly when using the Terminal (gnome-terminal and the LXDE and Xfce ones) or system monitor and moving them from their default place. You get this little white botch at the corners. I'm not massively technical and I'm ambivalent about how much more I want to learn as I have plenty of creative outlets already, but I would like to solve this. Somehow xcompmgr is treating these programs as a different class? It's capable of drawing the window borders properly as it is just these two programs that get botched. Possibly this doesn't get noticed as maybe people usually use xcompmgr with openbox and LXDE and their square window borders. I did do a search but there was nothing matching what I saw.
In kde I can configure windows to "force" them always open in a specific desktop. I set firefox to open in desktop 1, openoffice in desktop 2, amsn in 3 and konsole in desktop 4.How can I do the same in Gnome?
View 1 Replies View RelatedI've seen some desktop screengrabs which have included a transparent graphic (usually in the upper right corner of the screen) that displays current system information such as the hostname, kernel revision, CPU utilization, etc., that is constantly updated.Is that something that is available from Debian? I would like to install it to check it out, if it's available.
View 5 Replies View RelatedIs there a way to set a default terminal window size when I click on the "Terminal" icon? I need my terminal to be of a certain size every time I click on it?
View 2 Replies View RelatedHave recently tried to start ubuntu with kubuntu-desktop, but as I reboot my computer kubuntu only shows the terminal after the login and I cant get my desktop back.
View 1 Replies View RelatedI changed my desktop from ubuntu to kubuntu (after installation) using three commands:
Code:
sudo apt-get install kubuntu-desktop Select kdm as dm
sudo apt-get remove ubuntu-desktop
[code]....
in xfce desktop >> when i try and run "disk management" >> it gives me a "not allowed" message >> How can I use su (root) with "disk management" (in the gui) without the "command prompt-terminal" window?
View 7 Replies View RelatedI am using OpenSuSe 11.3 and Xfce. When i start my Xfce session, in left down corner I can see useful terminal with logs. Propably it is /var/log/message or something. When I use Remote Administration (VNC) this terminal is missing.
1. Where can I find configuration file or command which is starting this terminal ?
2. How to start it under VNC session?