Fedora Hardware :: Low Sound Output At Every Restart
Jan 20, 2010
I am using fedora 12 (omega 12.1 remix), after installation I got very very low sound output and I dreaded it was to remain this way. Then I did some searching and found this command in a linux site 'alsamixer -c 0', I turned up everything and yippee I had sound. But now the problem is at each restart the settings are defaulted to a low output. How can I make the change permanent? Can I call alsamixer command and give 9-10 up keys as its input in bashrc. Well I am just guessing.
I have installed Fedora 12 yesterday and the codecs sound today obtaining audio mp3. I have update kernel to 174 version and after restart I haven't sound. I saw a alert but I ignored it in which said something about a path deleted (i don't remember which). But in Preferences/Sound/Aplications i see that my reproductor is open.
I install fedora 12, but a problem shows up. The sound is too low, so I go to the terminal and run alsamixer. Pulse audio is for default, so I check Mi card Hd Nvidia and make the sound louder, but wend I shut down the PC and star up again, the settings are Low again. So I don't know how the set up the system to save the parameters.
Running 10.10 and win 7 on my HP dv6-2150us laptop and I'm having a few issues.
First how do I get HDMI audio output to my TV? I think I have just a integrated Intel graphics card. It works fine in windows but I can't seem to get it to work in Ubuntu. I tried searching but couldn't find anything pertaining to this issue.
I am getting no sound output on Fedora 12 (fully updated). If I switch to Windows Vista (which is also installed on the same machine), everything is fine. So, I guess I will have to configure sound from somewhere. Where should I start?
I don't know anything about ubuntu. Could you guys help me out. I'm pretty knowledgeable with windows if you guys need a printout of something let me know. My friends getting really frustrated about this. Help!!i
So here's the situation. He plugs his audio jack into his computer and then into the speakers but it still plays from the computer speakers.
Several days ago, I replace my PC's motherboard and now sound is too low - I can't hear practically anything, I used alsamixer to configure output volume level to normal, but this won't survive reboot. I tried to use 'alsactl' and saveed rules, and edited rc.local to restore - but it didn't help. Can anyone tell me how to fix it?
I have just bought a new PC with an ASUS M4A78-AM motherboard with integrated VT1708S 6-channel sound chip in it, so I freshly installed fedora 12 without any issues However, I can't get the surround sound working. I have searched many forums a lot, and haven't found any solution yet.It seems that even the SPDIF output does not work on this sound card, and that is what people talk about on almost every forum / mail list. So I was unable to find almost ANY information regarding ANALOG surround sound.
The motherboard has 3 jacks on it - green for FRONT / 2 speaker set; blue is the line in OR THE REAR-SPEAKER out, and pink is the microphone OR side speaker out in the 6-spk configuration.My speaker configuration is 4.1 [2 front, 2 back and subwoofer]. Line out does not produce any sound.I have uninstalled pulseaudio [sudo yum remove pulseaudio]Now alsamixer shows a lot of controls, but even if I unmute line out and set it to max, it is still not producing any sound.
I have installed Fedora 13 on my laptop, but there is something wrong with the sound。It just comes from both the computer and the headphone. I have installed alsa, you can see as follows:
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound. 2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
I have installed Fedora 10-x86_64. I was happy and content with the distribution. Earlier, I found that there is no sound on my headphone's jack where as the normal sound output from my laptops's speakers is OK. I fiddled with the available mixers but couldnt get anything. There seem to be 5 different mixers (HDA, ALSA, OSS), 3 for the playback and 2 for the capture.
I am using an acer 4530 laptop. It has a nvidia Nforce MCP77 chipset. and the o/p lsmod| grep snd :
I go and restart ssh and I get this weird message. thought I should be getting ok or fail message, at least thats how I remember it. What do you think?nate@universal-mechanism:~$ sudo service ssh restart
This is a really weird issue. I'm using 10.04 and on occasion when I boot into Ubuntu the sound doesn't work along with losing the ability to shutdown via the menu. When I click shutdown it just logs out. I need to shut down my PC by using the terminal.
It's strange because the sound and shutdown work as expected most of the time. The issue is seemingly random.
I use headphones and have an MCP73 sound device; am running OpenSUSE 11.4.
On each restart, I get no sound. I have to go to YAST, Hardware, Sound, Other, Volume. The 'Other channels', Front slider is at 0%. If I slide it up to 100%, my headphones start working. At this point the Help text says to press 'Next' to save the settings, but there isn't a 'Next' button...just a Cancel and OK. OK keeps the new setting, but apparently doesn't save it permanently.
What can I do to avoid having to reset this slider every time ?
just installed ubuntu 10.04.1 after using ultimate for abit but having sound issues which i thought could have been os based.Sound works fine from boot and continues fine until i open options and try to configure my mic settings, i get like maybe 5 secs to make adjustments then all my sound dies totally. The icon then shows as speaker with 3 lines next to it and within the configuration for sound my mic hardware vanashes. I cannot get any sound until i restart my computer and so cannot use apps like skype which i do tend too use alot.
I ve done lsusb and it finds the usb speakers. but I cant get an output at all, whatever I do in preferences/sound or preferences/pulseaudio preferences.Booted with XP and speakers work fine. Sound worked fine with Lucid and has done until today with Maverick, did have similar probs with sound going sometimes with Karmic, but they could always be sorted by adjusting the settings, cant get anything and its sudden,
For some time now, my laptop makes a quick but loud buzz sound when I shutdown or restart it. Muting my sounds doesn't fix it. Before, it didn't do this. It just started one day and got worse till it happened everytime I shutdown or restart.
Going to preferences > sounds > changing sound theme to no sounds helped a bit and after doing this, it doesn't happen all the time anymore. This is quite disturbing especially when I'm in libraries. What worries me the most though is that it might affect my speaker.
HDMI outputs video but not sound from my Acer Aspire 5738 laptop.I have tried both SMPlayer and VLC setting both audio outputs to HDMI.Those media players have always worked for me using other Linux distros.Is there another media player that I should be using?If it's important;lspci lists;Audio as ATI and Video as ATI Mobility Radeon HD 4500
I just finished installing 11.4 64bit. Kaffeine and Amarok both produce sound, but VLC does not. When I invoke vlc [URL]. I can see the name of the album playing but there is silence. I ran the mmcheck script.
I recently installed Kubuntu 9.10 (I think, the latest anyway) on my gf's computer. Everything works great, except for the sound output. The volume control works, (both the buttons on the computer and inside Kubuntu) but there is no sound output whatsoever (not in vlc, system sound etc). Ive googled a little, and I've seen some tips about get it, right click in on sound settings in the panel, and choosing preferences, I don't seem to have that tab, however I've got a "show mixer window" where I the can adjust volume.
I've got 2 tabs here ; 'HDA ATI SB' and 'HDA ATI HDMI' I guess the first one is the one that is the ordinary output, the other if I connect a tv or something. I've also read something about 'alsa' and 'alsamix' I don't seem to have that one, and I've tried sudo apt- but I've haven't been able to find it. I dont know if it is of any importance, but it is the 64bit version of Kubuntu. I'm not sure about exactly what soundcard and driver I've got, but the computer (laptop) is a pretty new HP, and when I run:
Code: cat /proc/asound/card0/codec#*| grep Codec I get the answer Code: Codec : IDT 92HD75B3X5
As title suggest I can't output 5.1 sound with Ubuntu 10.4 which I nevere faced in earlier version like any 9.04 or 8.10,8.04 etc etc.I came from 9.04 to 10.4 and noticed that sound preference has changed which earlier have Windows XP Like long sound panel.My Board is Intel 945GTP which have 3 jack
Green=>Sound Output =>Front 2 channel Pink=>Mic In =>Center Sub Blue=>Line In =>Rear Channel
I am running Ubuntu 10.10 and I am unable to get any sound output. My sound card is installed, cables are connected, and volume is up but I get no sound output. Here is what I see
I am using ekiga 3.2.7 on Natty and I am able to make pc-to-phone calls but I am not getting any sound on my speakers. The person on the other line is able to hear me, but I cannot hear him. Does anyone know what the problem might be?
I have Ubuntu 9.10, and am trying to get my headset to work with it. It's a USB headset, not a bluetooth headset. Anyway, the input is working. I switched my input from my internal mic to my USB one in my sound settings, and that fixed that. However, even if I set my output device to the USB, it still doesn't work. Does anyone have any advice? It works on Windows.
The headset is: Planet UP-100, Genius G-Talk Here's lsusb: Code: Bus 003 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
I am using Ubuntu 10.04 on a dual-boot system with Windows 7. Yesterday I upgraded from 2.6.32-23 to 2.6.32-24. After that, pressing the shutdown button and selecting shutdown or restart (whether on the login page or after I've logged in) will only bring me back to the login page. I can shutdown or restart if I do sudo shutdown now, but I'd prefer to use the GUI. Also, there is no sound now (not a big deal, but still not good). And I can't access my storage partition (not the windows7 partition, but a third ntfs partition with data on it). I get the error message that I am unauthorized to mount. I have the only account on this computer, so I should be authorized. This one is a HUGE problem for me, because I need to be able to access my data for work. None of these were problems before the upgrade.
Oh yeah, and quickstart is not enabled. Also, if I go to Power Management, and try to alter what to do when Power Button is pressed, my only option is Ask Me. I know these have been problems/solutions to the shutdown/restart problem in the past.
