how to connect a server with several client using c programming?I have the program, but how do i use it?setting up network in fedora? i really don't know anything on how to do it
View 4 RepliesI just upgrade my Fedora 14 to Fedora 15 RC1.I found the critical issue for me that Juniper Network connect(SSL VPN) didn't work for me again.I wonder if the network interface name changed impact this, but I am not sure about it as I didn't see any obviously error.I can connect the VPN auth page with my username and password after I switch my Java plugin to Sun JRE( I use google Chrome).As the Java VPN applet started, it appeared for a while and shutdown again. I think the VPN auth has been passed at that time, the problem might about creating the VPN Tunnel.
View 8 Replies View RelatedRight now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
View 6 Replies View RelatedI am using Reliance Netconnect Broadband+ (HUAWEI EC 1260) on my Fedora 10 and Fedora 12.
View 1 Replies View RelatedI have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
I just installed Fedora 12. My wireless card in the laptop works, and can "see" available networks. At system startup it pops a window for me to enter a security key, but I can only choose:
None
WEP 40/128
WEP 128 Passphrase
LEAP
Dynamic WEP
My router is set up to use WPA-Personal with AES, and works just fine with various Windows and Mac computers.
I ran yum install NetworkManager and same for wpa-supplicant. Both were updated to most recent version, but I still cannot enter a WPA security key.
i got little frustrated with vsftps. the transfer rate is very low. im using fedora 12 and use ad-hoc to connect beetwen my two box..
View 6 Replies View RelatedI able to connect to Internet with WAP encyrption. But after I restart my laptop, it cannot connect again.I also cannot connect to wireless with WEP encryption.I cant even connect to open wireless without password. It is very weird that I able to connect awhile with WAP but others cant.Anyone counter this problem? What is the problem? driver?But I able to detect wireless. And can connect with LAN cable.
View 2 Replies View RelatedI tryed to config the tcp/ip settings.
I tryed with the following values:
IP: 192.168.48.120
subnetmask: 255.255.255.0
gateway: 192.168.48.2
With the above settings i was able to connect to net same thing i tryed for fedora
But i was not able to connect, it will always shows the subnet mask as 192.168.48.2 ie the gatway value insted of 255.255.255.o
i'm new on board and new for linux.i installed fc 9, and it's look ok. i want to use stutic ip,so i did what i find here:uote:First, NetworkManager and static ip addresses do not get along. If you want to use static ip addresses, turn off the NM services by going to "system->administration->services" and disable the NM services and reboot.Next, goto "system->admin->network", highlight your device and click the "edit" tab and configure the device. Uncheck the "controlled by NM option" and "automatically obtain ip address" BUT then place a check in the "allow users to control" and "activate on boot"Then click the "dns" tab and fill in your dns servers ip addresses.the problem is that is no internet connection after reboot. than i go to system->admin->network,and activate the device and all ok.
View 10 Replies View RelatedI recently have just started using linux and downloaded Fedora 10 and I'm trying to figure out how to fileshare and print share with my windows vista machine.I edited the registry file on my Vista machine HKEY_ LOCAL_ MACHINESystemCurrentControlSetContro lLsaLMCompatibilityLevel and changed the level from 3 to 1.I've also gone through a lot of tutorials on editing the smb.conf file and set my workgroup name, netbios, and changed permissions on my linux machine (a Lenovo netbook) etc but thats about as far as I can get. This may sound like a dumb question but I can't even get samba to connect on my linux machine so how do I do that?
I was wondering if any of you guys can provide a solution as to how to connect or direct me to a good howto for setting up and using Samba seeing how I'm a noob.I've been on Samba.org already and I'm more confused than ever.
I have Fedora 11 and have successfully set up VNC so that I can connect within the network (direct using vnc client/server setup). I am in the middle of working on a problem and have a fried who is in another city and was trying to set up VNC so that he could connect via http, which I know is possible (that it listens on range 5800 + the display number - mine is 3 in this instance). For the life of me I cannot get the java http viewer to work, here is what I have done so far: My vncservers file:
[Code]...
My router is set up to forward incoming requests on the range 5900-5910 and 5800-5800 to this computer. I have opened ports 5902, 5903, 5802, and 5803 on my linux firewall. So far as I know, this is all that is necessary..well. Whenever I attempt to connect via [URL]:5803 I get a time out error. What could be wrong?
I installed fresh copy of fedora 11. I can't activate or deactivate ethernet from system>Administration>Network. Why is this............I can connect to internet directly by enabling network icon on right topmost corner. Even doing so dosen't guarantee connection at times. What could be wrong here ? Also my network icon shows it is disconnected whenever I start my computer. Cant fedora 11 just connect to the internet while it boots ?
View 2 Replies View Relatedim just recently in to linux world and the first thing i did is to familiarize my self to the environment of linux and then and structure of file system. I run F10 in virtualbox. and setting it to bridge mode.
after that i began configure my network in linux. as default i connect to the internet. enable NetworkManager and dhcp on(auto detect ip).
then i began to manually configure it.
enable eth0 and insert the necessary ip i found in ifconfig then active eth0 then restart /etc/init.d/network
then i still dont have internet.. then i read that i need to disable my NetworkManager, so i do that.. and it works.
BUT one day later . cant connect to the internet.. so i redo my configuration. and to check if i have internet connection i ping outside ip like our external DNS, public site, localhost etc.. and i can ping all of them but when i use mozilla i cant browse any site..
I'm facing a problem with 'ssh'. In my lan environment i've configured a system with fc12 and one more system with fc9. When i'm trying to login through ssh from fc9 to fc12 it's working, but at the same time if i'm trying to login through ssh from fc12 to fc9 it's not working. I was getting the error "connection closed by remote host"can any one suggest me how to recover this.
View 10 Replies View Relatedi want to share my problem that after updating fedora 12 by my mobile broadband. mobile broadband connection stopped working. i mean now it can't connect to the server.
View 1 Replies View RelatedThis questions is a little complex but here goes.at a central HQ I have a windows server 2008 R2 machine running routing and remote access. At my home office i have a class C lan with a Fedora 13 machine. I can get fedora 13 to connect using pptp no problem. I have my router running tomato set to redirect all traffic to teh 10.0.0.0 network to my linux server. My questions is how to I make the fedora 13 machine pass all the traffic from my network with destination 10.0.0.0 over the vpn tunnel? so for instance if i ping anything 10.x.x.x from any machine on my network it will find it and reply?
View 1 Replies View RelatedI've created an ad-hoc network using a wireless device I have at home. When the networks shows up in NetworkManager, I select it, the two dots turn green, and it tries connect for about a minute - but eventually fails.Is there a special way you need to go about in order to connect to ad hoc networks?Note: I've tried connecting to it through Windows, and everything works swell...so the problem isn't from my other device - the problem is Fedora.
View 12 Replies View RelatedI installed Fedora 13 from the KDE live cd on it's own partition. My router was recognized and the networkmanager applet in the panel shows signal strength is nearly 100%. At boot, the networkmanager is in a constant state of "configuring connection" and the password window pops up three times. I click ok each time and then the icon changes to "network unavailable", that looks like an ethernet cable unplugged. Wired ethernet works fine. The rt2800 module is loaded for my wireless g/n card.
View 1 Replies View RelatedExcuse the length but this issue will take a little explaining. I need to connect my fedora11 box to a windows XP (sp3) laptop. Both are on a lan, with the fedora box at 192.168.0.100 and the laptop at 192.168.0.102. The laptop has openssh server by way of cygwin. Both machines have account jimm with the same password. I can ssh (putty) from the laptop to fedora but can't go the other way. When I ssh from fedora to windows I get a login and password request which results in "Permission denied, please try again." . I know the password is correct as I login to the laptop with it. I have also tried using the windows rdp by turning remote access on in windows and then using any of a variety of desktop viewers to connect. This always results in a version of "Autoselected keyboard map en-us ERROR: 192.168.0.102: unable to connect ". I have turned off firewalls in both machines for these tests and made sure that the local router is completely open to lan traffic. I've checked the forums and not gotten any ideas on how to fix this. I seem to remember (from way back when) that there was an issue connecting when windows switched from plain text passwords to encrypted. The ssh password rejection is what got me thinking about this. By the way, I forgot to mention that I can mount a samba share of the windows drive on the fedora box.
View 2 Replies View RelatedI have F14 on a laptop and can't see the laptop screen very well, unless I put my face like right up against the glass, is there a way I can login to my F14 laptop using my windows desktop computer?
whats the easiest way to do that?
I used to use nomachine in previous versions, is that method still used in F14? can't seem to find the FreeNX package anymore.
I used these instructions in previous versions: [URL]
which you'd think would still work in F14, but not sure what happened to FreeNX
otherwise, how do you do it using vncserver? I didn't do it that way in the past because I didn't understand how.
using XFCE window manager in F14 on a windows 7 desktop
Laptop: HP Pavilion dv6-1350us
Desktop: custom build Asus computer using a 23 inch Samsung SyncMaster 226bw LCD display
I have searched, and I have found that it's a problem of Kpackagekit. The solution would be to install Wicd, but according to the official page, Wicd don't support connection from usb modem, that it's what to occupy generally, but often I need connect to internet from wi-fi.Is there a option for connect so much to wi-fi as to usb modem
View 4 Replies View RelatedI have installed fedora 14 x86_64 in my pc. i m trying to connect to internet. in wndows i have connected to the internet using following info:
EVOLUTION NETWORK(BROADBAND INTERNET PROVIDER)
username: username
password:...
I am connected to the internet provider via lan. they provide me automatic ip.
Now how can i configure my network connection in fedora 14.
I'm trying to connect via ssh from a remote to a local machine.The local machine is connect to the ISP thru a wireless router. I know the ip address of the local machine from myaddress.com. The local machine is running sshd. I can ssh from the local machine to the remote, but I'm unable to ssh from the remote to the local. I know the local machine has not yet changed its port number.
View 3 Replies View RelatedI just installed Fedora 14 on my laptop as a Dual Boot with Windows 7.The problem I am having is that I can't get fedora to connect to my wireless internet.I can access it just fine on the windows side.On my Fedora desktop at the top there a little icon with two little computer monitors there is also a little x by them. Here is whats in the computer as far as networking devices:
Realtek RTL8191SE Wireless Lan 802.11N PCI-E NIC
I also have a:
Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
No matter how I configure settings it don't work.If I have to download something on the windows side to fix this please let me know how to get it to the linux partition.
I installed fedora15, My openvpn didn't connect to my working computer.I checked openvpn configure more time, but still don't connect,
View 11 Replies View RelatedI installed fedora 8 as guest in vmware on host xp.I am unable to connect to internet in fedora
View 1 Replies View RelatedI loaded F10 up on my laptop a few nights back. NetworkManager connects via Ethernet just fine. It will also connect wirelessly, but only when security is disabled. I've been using 128-bit WEP.
When I try to connect using security, this is what appears in the log:
Code:
Jan 29 21:07:17 localhost NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 29 21:07:17 localhost NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
[Code]......
I have installed Fedora 10 on my Intel system. I am not able to connect to internet from it. Mine is a broadband connection with ADSL+2 modem. I could connect once but afterwards it was deactivated and I got following bug report.
Component: system-config-network
Version: 1.5.93
Summary: TBd036c2a6 re.py:237:_compile:TypeError: first argument must be string or compiled pattern
Traceback (most recent call last):
File "/usr/share/system-config-network/netconfpkg/gui/tonline.py", line 79, in on_generic_entry_insert_text
if re.match(str, text):
File "/usr/lib/python2.5/re.py", line 137, in match
[Code]...
have fedora 10 and am having problems with ssh. For some reason I can't connect via a remote host to my ssh. Local network connections do work just fine. I have been looking for a log of what is going on but have not had luck seeing anything.Things I have tried:
-Modify hosts.allow to allow ssh to all
-generated rsa1 key identity tryed specifying that with the -i option on the guest computer
[code]...