Fedora Networking :: Suggest Wireless-N Adapter (USB Or PCI) That Is Well Supported Under F13?
Nov 26, 2010
Can anyone suggest a wireless-N adapter (USB or PCI) that is well supported under F13? And do you think an upgrade from G to N is worth it? I'm probably going to upgrade my router to N in any case as the old one is buggy and/or dying.
View 2 Replies
ADVERTISEMENT
Dec 11, 2009
I just installed the driver for my D-link DWA160 adapter, And now I cant seem to get it working.
View 6 Replies
View Related
Jan 3, 2011
The linksys AE1000 is not supported by linux according to the linksys website. Are there any workarounds? I use this network adapter to connect to my wireless network, and it is basically useless at the moment.
View 6 Replies
View Related
Nov 12, 2009
I have a wireless USB (TP-Link TL-WN620G) adapter on F10( 2.6.27.38-170.2.113.fc10.i686). I have installed the drivers and it is detecting my router. But it keeps asking for network password with repeating a dialogue box although I entered correct password. I have configured the wireless configuration using NetworkManager.
View 6 Replies
View Related
May 29, 2010
I have "D-Link DWA-125 Wireless 150 USB Adapter". I can use this wireless adapter on my laptop, i can use it on my desktop as well but only when windows is running, im a newbie to fedora, today is my 2nd day and 3rd night, so pretty exited about it. i have installed fedora 13 on a different hard-disk on my desktop. when the computer is booting, there is an orange light on the adapter glowing, it turns off when the computer reaches the fedora loading screen. If i see fedora's Network Configuration window under the hardware's tab i see the "D-Link DWA-125 Wireless 150 USB Adapter" listed along with my lan card. Now if i go towards the clock on the top right to get the wireless connection working, it shows wireless network disconnected. I have tried creating wireless connection manually by inserting the SSID, macadress, BSSID, ,WPA passkey etc, but still doesnt works. when i try connecting using hidden wireless connection, i receive window for inserting keyring password again and again, stating that the login password does not match. but during all this time, i still havent seen the orange light glowing activity on the external usb adapter. If i restart the computer in windows the adapter/wireless connection works. also have checked the Network service, it seems that the service is up and running. i really require some assisstance on this,
i have noticed this, that if i go under network configuration. the first tab over there, inside devices i cant see my D-Link adapter, but if i switch onto the hardware tab it shows my lan card as well as my D-Link adapter. so does it means that the driver is missing? or any service which is disabled, however at this point of time i can get only using wired connection. please assist me. with this issue, im also downloading the 500 complete update as well for fedora, hoping that it may make it work.
View 14 Replies
View Related
Jul 14, 2010
To setup a Compact Wireless-G USB Network Adapter (WUSB54GC) on Fedora 12 ?
View 1 Replies
View Related
Mar 16, 2009
I am trying to set up a wireless LAN using a Zdyas zd1211 USB adapter. I downloaded the .tar file, uncompressed it, then used make and make install. I then loaded the driver using modprobe -v zd1211. I have some questions:
A) After I performed all this, when I ran the Network Configuration Window, I can't find the Zdyas zd1211 driver in the list of supported wireless cards. Is there a configuration file I should edit to add this driver to system-config-network?
B) To which files should I add the modprobe, ifconfig and iwconfig commands or values so that the driver is automatically loaded and configured whenever I reboot the computer?
C) I am using FC8. What package supports the wpa supplicant?
View 2 Replies
View Related
Mar 7, 2010
I have a wireless usb-adapter with usbid:
Code:
Bus 001 Device 003: ID 1690:0711 Askey Computer Corp. [hex] SMCWUSBT-G (no firmware) I have heard that the second number after ":" above gives info about the chipset included in the adapter. It turns out this adapter has an atheros 5523 chipset. My question is if the product id 0711 above is the only thing determining if the adapter will work with Linux? If so, i can find in the file modules.usbmap that zd1211rw supports this chipset:
[Code]...
though it is associated with a different vendor id which is 0x1435. In this case, should i manually associate this driver with this adapter? You might ask why bother tweaking the OS?. The reason is that neither Fedora detected this thing as a wireless adapter nor ndiswrapper was able to install the windows driver (I think the problem is Fedora is 64 bit but win driver is 32 bit).
View 2 Replies
View Related
Jan 28, 2010
I just installed Fedora 12 on my HP a430n PC.I used to run Fedora 10, then moved to Linux Mint 7, then to Ubuntu 9.10 and now I am back to Fedora because I want to become more adept with manual package installation and adding repos.When I ran Fedora 12 immediately after then install, before running yum update PackageKit or the software update, it would use my wireless adapter (Netgear WG111v2) and connect to and stay connected to a network just fine. No hiccups.After running the updates and restarting the computer, the wlan won't stay connected for longer than 20 seconds, which is frustrating when trying to install mp3 codecs.
This seems to be a bug in the latest driver update for the WG111v2, but I might be wrong. Anyone have a fix or a way to revert back to the initial driver (I don't know what the original wireless driver was called).
View 1 Replies
View Related
Oct 1, 2009
This is my startup routine:
I log on and Network Manager shows no wireless adapter.
I go to System > Administration > Network:
There are two entries in the Devices tab: Wireless and Ethernet
As soon as I double click the Wireless device and the configuration pops up, the device starts working (no changes to the settings are made)
I have the following set to ON:
- Controlled by Network Manager
- Activate device when computer starts
- Allow all users to enable and disable this device
View 7 Replies
View Related
Mar 3, 2009
I have been running FC8 on this IBM T23 with a D-Link wireless adapter. Using MadWifi this has worked fine with Network Manager disabled. But now I have nuked that installation and replaced it with FC10. Network Manager is nice, and I would like to use it. And it kind-of works. Network Manager recognizes my router and all my neighbor's routers, but I can't connect.
[Code]....
View 5 Replies
View Related
Nov 24, 2010
I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
View 2 Replies
View Related
May 25, 2010
I have just completed installing Ubuntu 10.04 LTS. When I click on teh network manager it shows:
Wired Network
disconnected
Wireless Network (Intel PRO/Wireless 2200BG [Calexico2])
wireless is disabled
Wireless Network (Manufacturer RealTek RTL8187 RTL8187 Wireless)
[Code]....
I want to be able to connect through the RealTek wireless adapted.
View 3 Replies
View Related
Aug 30, 2010
I am severe wireless problems with Ubuntu 10.04 on my laptop.(Spec below)
I have just performed the first clean install since new. Installed a new Hard Drive as well. The machine and wifi was fine under Ubuntu 9.04.
It is booting much faster now but the wifi keeps dropping off.
Spec:
Machine - Acer Aspire 4310
Wireless card - *-network
description: Wireless interface
product: AR5001 Wireless Network Adapter
vendor: Atheros Communications Inc.
[Code].....
View 2 Replies
View Related
Feb 3, 2010
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
View 1 Replies
View Related
Feb 15, 2009
I have an older laptop on which I have installed Fedora Core 10 (2.6.27.5-117.fc10.i686). I am using a Retail Plus Mini Wireless USB Adapter. I have scanned this forum and someone mentioned that support for this adapter should come "out of the box" for FC10. I have a fair amount of experience with Linux command line configuration but am by no means an expert. I have absolutely no experience, however, with wireless.
NB that via iwconfig I get the output below which is giving information about my (currently for now unencrypted) SSID called "activity_logged". Pardon my ignorance but wouldn't this mean that I have wireless enabled and if so how does one access it through the command line? I would also eventually like to go back to encrypted status and access that via command line.
[Code]...
View 5 Replies
View Related
May 2, 2010
Had a hard drive fail this week, and I am going to order a new one. I am using $150 dollars in Best Buy gift certificates. Well seeing as how I have some left over I would like to get a usb wireless adapter that would work out of the box (preferably usb although I could always get an internal). All Best Buy has are wireless N cards and I was wondering if anyone knows if any Wireless N USB cards work out of the box without downloading firmware or NDISwrapper.
View 3 Replies
View Related
Jun 26, 2011
I'm thinking of adding a wireless antenna to my desktop since I want to get rid of the cable going outside my window into the other room. I know some cards have trouble with their drivers or performance in Ubuntu so I was wondering if there's a way of finding the best brand and model to get so I know I won't have any problems with it on my Ubuntu installation. A webpage, a place where people post their cards and how good they perform or something like that which can help me get the easiest one to work with. The card would be installed via PCI and the room with the router is pretty much in front of this one.
View 4 Replies
View Related
Jan 23, 2011
I recently installed Ubuntu 10.10 on my laptop. It is an older laptop with a Radeon Xpress 200m video card, which apparently is unsupported by the newest version of the proprietary ATI drivers. Right now I am using the default graphics adapter that was installed, however, all of my games run abysmally. There isn't one game I have played (World of Goo, Gish, Eschalon Book I) that has played decently. They all suffer from screen flicker and tremendous slowdowns. Is there any option for me since the 200m is no longer supported by ATI?
View 5 Replies
View Related
Dec 6, 2010
This doc is very outdated. I don't know who compiled it, but it's very old and isn't up to pace with all the newer hardware that has been released over the past year.
View 1 Replies
View Related
Aug 3, 2010
Ok, so I am needing some drivers and I've been googling like hell to find em, however, I can never seem to find any. My adapter model is F6D6050v1.
PS: when I try sudo ndisgtk it comes up with command not found.
View 1 Replies
View Related
Jul 17, 2010
I need to know the best Wireless card for Ubuntu. One that is supported without the "wrapper" and is supported out of the box. I know that the Wireless-N is not supported well in Ubuntu without a wrapper.
(I went to Best Buy to get a wireless-N card and asked specifically if the one they recommened was supported. They said yes. And I now doing research I find it is not.) I need to get my Unbuntu Linux desktop up and working on wireless as soon as possible.
View 2 Replies
View Related
Aug 26, 2010
I have installed ubuntu lucid 10.04 release, and i want to install a wireless adapter usb or pci in my desktop. Can somebody recommend me a model that works fine?
View 3 Replies
View Related
Jan 26, 2011
I have tried a couple of wireless adapters (USB dongles) but none of them work all that good on Ubuntu. I keep loosing connexion when on Ubuntu while on Windows (dual boot) there never seems to be any problems, so signal strength is probably not the issue. I bet it's a drivers problem so what I want to know is which adapters work really really good/great/fantastic on Ubuntu? The first option, wext, was chosen when I installed Wicd (running side by side with GNOME Network manager).
View 9 Replies
View Related
Jun 17, 2011
I've got a couple of old PC's running Ubuntu but I want to give them wireless capability and move them to a different room. What is the easiest wireles adapter to use? I'm thinking USB would be easier than opening the boxes to install cards, plus I could buy one adapter and try it with both PC's to make sure it works, then buy a second one once I know it works.
View 1 Replies
View Related
Mar 11, 2010
Iwlist wlan0 power:
wlan0 Current mode:off
iwconfig wlan0 power on: This does not work
ifconfig wlan0 up: does not work
[code]...
View 2 Replies
View Related
Jan 7, 2010
I have Problem with connection Wireless.I can't install wireless adapter.Now i'm installed Backtrack3.How i can Configure wireless adapter.
View 2 Replies
View Related
Jan 13, 2009
As I am struggling to get my Netgear WNP111 to work with ubuntu 8.10 ,can someone recommend an adapter that will work out of the box with ubuntu 8.10 .
View 7 Replies
View Related
Jan 1, 2010
I am trying to get the above wireless adapter o work with Ubuntu. I have installed ndiswrapper but I am unsure what windows driver I need that will work with it.
When I type lsusb I get the following: Bus 001 Device 002: ID 0df6:0042 Sitecom Europe B.V.
I tried searching the ndiswraper site but all I could find was Sitecom WL-344 300N X2 Wireless USB Adapter that pointed me to Driver: rt2870.inf and rt2870.sys (on Windows XP).
I am not sure if this will work or where to download these files, so I was wondering if anyone else has this adapter that could shed some light onto how to get it working.
Edit: I just tried the rt2870 driver and it didnt work
View 1 Replies
View Related
Jan 17, 2010
My netbook have an internal wireless receiver, but from my room it doesn't work well, so I bought a TP Link TL-WN422G hoping it receives better. Ubuntu sees it but I don't know how to force using it.. I attach lsusb with peripheral in bold:
View 3 Replies
View Related