Fedora :: Firefox Can Not Connect To Anything - 'proxy Server Refusing Connections'
May 11, 2011
I use Fedora 14 and Firefox as my web browser. I use Astrill VPN service. I have the following persistent problem: I start my computer. Astrill is not set to start on boot. I start Firefox. Firefox can not connect to anything, it says 'proxy server refusing connections'. I go to Edit>Preferences>Advanced>Network>Settings I click the radio button 'no proxy'. The problem remains. I am completely unable to connect to the net. Even on reboot, I cannot connect. On reboot, Firefox is set to use a proxy, although it was not on shutdown. Some init script is setting this. My normal connection is often faster than through Astrill, so I only really need to use it when I want to get at a website that is blocked by the govt here in China.
where Firefox is being told to use a proxy, and how to reset it to not use a proxy, assuming Astrill is not active. There must be something left in a .conf file somewhere which is overriding the settings in Edit>Preferences. Because, if I set it now to 'no proxy', I cannot connect to the net.
View 5 Replies
ADVERTISEMENT
Oct 4, 2010
So Im newish to computing, and new to anything network/linux related.Situation: yesterday I installed Privoxy and it was working great (verified via Privoxy.org). Starting today while at a coffee shop i go the error "the proxy server is refusing connections". All of my settings are what they were yesterday and the default:
Code:
$ privoxy --version
Privoxy version 3.0.15 (http://www.privoxy.org/)
[code]...
View 14 Replies
View Related
Jul 22, 2011
I ran an update on ubuntu server today, and after a long install process, it spat out an error, telling me to run "sudo dpkg --configure -a". After I ran that command, I was no longer able to access my website or forum. I could really use some help with this one, I've tried so many things including disabling shorewall, restarting apache, so many things...
View 9 Replies
View Related
Feb 3, 2011
Since I cannot upgrade Adblock Plus anymore because iceweasel is too out of date for the new versions, I am trying to give privoxy a try. I am following the howto Block Ads & Fast Caching w/Privoxy +Squid without success. I am always receiving the error:The proxy server is refusing connections Iceweasel is configured to use a proxy server that is refusing connections.Check the proxy settings to make sure that they are correct.
I added these lines to /etc/privoxy/config
enable-remote-toggle 1
enable-edit-actions 1
permit-access 127.0.0.1
Moreover, I have edited the /etc/hosts file to block urls providing adverts and anything I wanted rejected.
View 7 Replies
View Related
Sep 11, 2010
When ever I try to sftp or even ssh into my server I get connection refused.
I have the port forwarded in my router.
What am I missing?
Also I have installed Ngnix so what do I need to do for it to work?
View 5 Replies
View Related
Jul 20, 2010
The ssh server is running Xubuntu 9.04. It was working before. Then I tried SSHing today and it gave me a connection refused. The computers I've tried SSHing from were running Ubuntu Netbook Remix 10.04, MacOS, and Solaris 10. None of them would connect. The ssh server is running the latest version of openssh-server (according to apt-get install). I'm assuming something in /etc/ssh/ got changed but I'm not sure.
View 1 Replies
View Related
Feb 12, 2010
My aim was to build a VERY simple smtp proxy under debian to handle mail from a port (51234) and forward it to the standard 25 port. I compile and install a "delegate" witch can handle easily that. It's working very well like that : delegated SERVER="smtp://anotherSmtpServer:25" -P51234
The strange thing is, it's working on my virtual test machine and on the dedicated server in local but I can't manage to use it trought internet. I test it like that. telnet [mySrv] 51234 Of course, no firewal, no deny host, no ined/xined, the service delegated is listening on the right port ... 2 clues : The port is answering trought internet with nmap as "51234/tcp open tcpwrapped" have a look at the tcpdump following :
[Code]....
View 2 Replies
View Related
Jul 7, 2010
I've been trying to make myself anonymous, but I cant find 'Tor' anywhere, tried 'yum & kpackagekit' neither have it. I did find 'Privoxy', installed it, set proxy for HTTP and HTTPS in Firefox, but it says 'unknown proxy' when I try to use it! I've been to the Privoxy web site and read through the 'User manual', but most of it is 'geek' to me!
View 8 Replies
View Related
Apr 14, 2011
I run Fedora 14. I use Firefox. Because I live in China, I have a VPN service from [URL] Their software has configured Firefox to use a proxy. I do not start Astrill on boot. If I start Firefox first, I cannot connect to the internet. how to tell Firefox not to use a proxy? Today, Astrill was down or unavailable or whatever, and I could not reach the internet. I have looked in Edit-Preferences but I cannot see a tab 'configure proxy'
View 5 Replies
View Related
Jul 31, 2010
At first, I was trying to update Yum and it gave several messages saying it can't connect to the website.
This problem has happened in Fedora 12 for a week now.
I can use the Internet in Windows but not Linux? All the settings are correct: It just won't connect to the Internet.
View 2 Replies
View Related
Aug 3, 2011
I have setup a Squid Transparent Proxy that works and I can connect to most websites and block-list works and yadda yadda yadda.
My problem is that when I try to connect to a certain PC it will not work. A bit more clarity...
[INTERNET]----[DSL-MODEM]----[ROUTER]----[SQUIDSERVER]----[NETWORK]
Connected to the DSL-MODEM is the PC in question that I can't connect to when using Squid. If I bypass the Squid from the Network and go through the router I can connect to the PC.
I want to be able to use the Squid server and still access the PC connected to the Modem and I want to have a Squid SAR report of the Network PC's accessing the PC on the modem.
The Modem/Router/Squid/Network all use the same IP range, but the PC on the modem has a different IP.
View 4 Replies
View Related
Oct 18, 2010
I have Fedora Core 13 running. I have successfully (I think) installed squid, although I may have it configured incorrectly. I can ssh into the box from work via putty, but I can't use the proxy. I get a message "the connection to the server was reset while the page was loading" I can use the proxy from my home network, and have watched the tcpdump for port 3128 while using the proxy. I have turned off iptables completely (I'm not sure yet how to just allow squid)...
View 3 Replies
View Related
Oct 20, 2010
Is it possible to set a proxy server for every user without manually configuring firefox for each individual user?
View 1 Replies
View Related
Aug 4, 2010
Is there a way to connect to a samba share on the other side of a dynamic ssh tunnel?I like to use ssh -D 8080 <host> to access the network on the other side of a ssh session. For applications with their own proxy settings it seem to work really nice.In this particular case I'd like to use the 'Connect to server' feature in Ubuntu to connect a samba share through the tunnel, but I can't figure out how to make only that connecton use proxy settings.If I enforce system wide proxy settings the ssh tunnel will die, so that is not an option.
View 1 Replies
View Related
Sep 12, 2010
Having a bit of an issue connecting to my apache2 server. I'm running Ubuntu Server 10.04lts. I can only connect to my website via ip address global, ip address local, and the dyndns domain I have linked to my ip address. I have DMZ setup for my server with a local static address of 192.168.1.100. I can only connect to the default apache page via lan, and It wont load when I try via proxy. I need to know how to configure my router (wndr3300) so that I can connect to my server (address 192.168.1.100) and the pages from outside of my network.
View 5 Replies
View Related
Feb 12, 2011
I used windows OS and installed Ubuntu 10.04 (amd64) in separate partition and works well but had a problem in internet connectivity. Likely reason may be the proxy setting that we used in college (currently). I used this commands to set up the IP address and gateway.
ifconfig -a | grep eth
"eth0"
sudo ifconfig eth0 192.168.5.209 netmask 255.255.255.0
[code]....
Then I manually set the proxy setting of HTTP which is given as proxy server 192.168.5.2 and port as 8000, further more there is a wins setting which is 192.168.1.178, really don't know where to put this number.
View 2 Replies
View Related
Apr 28, 2011
how to connect the database to proxy server.example:: this is the acl in squid.conf to block the website.the keyword that want to block store in file .txt
acl block_advertisers urlpath_regex -i �/etc/squid/
block_advertisers.txt�
acl block_entertainment urlpath_regex -i �/etc/squid/
[code]...
a bit info, the data that stored in database is a keyword to block the website if a keyword in blacklist match with the url that want access by user. if match so then the user cannot access the website.
View 6 Replies
View Related
May 16, 2010
I'm trying to set up a server for an NPO who connects to the Internet through an internal proxy (Websense). I can't access the Internet unless through the proxy.
Since it's a server I did not install a GUI so I'm wondering how to connect the new server to said proxy server. I have the IP address, port number and username-password for the proxy server. The new server has a static IP address and is ready too go!
View 6 Replies
View Related
Aug 15, 2011
I want to connect to an FTP server from the Linux command line. The server is configured behind a proxy.
If I call:
echo $ftp_proxy
I get a result like this:
abc.def.ghi.jkl:8080
If I call:
ftp -pn $ftp_proxy
I get a unknown host error.
How can I connect to the FTP server using the Linux command line?
View 1 Replies
View Related
Mar 2, 2010
I am running Jaunty 9.0.4. I have go through a proxy to get out to the net. It was working. Sometime yesterday it was unable to resolve the proxy server. Can't even ping it. Other computers can. I even switch cables to no avail. What could block the proxy server? I can't even ping google.com Was it something I installed through add/remove software? Has anyone seen something like this before and even better has a solution or can offer a way to troubleshoot this? I can ping myself and the default gateway server.
View 1 Replies
View Related
May 14, 2010
I am unable to connect to the Internet in lucid via a proxy server using apt-get or synaptic. Opera & firefox connects to the internet fine with the proxy setting.
I have tried the following solutions:
1) set proxy setting using systems|preferences|network proxy
2) editing ~/.bashrc & /etc/.bashrc
3) creating a /etc/apt/apt.conf file.
4) putting the proxy setting in synaptic
For the proxy setting I have used the both the verbose name as well as the ip address. There is no logon requirements for the proxy server. Either formats work in the browsers.
View 2 Replies
View Related
Feb 11, 2011
i tried to search for possible tweak in getting conkyForecast connect via proxy server. it connects and functions well when directly connected to internet (from home) but in office, i have to connect via proxy... how i go about tweaking the script to connect via proxy?
View 5 Replies
View Related
May 29, 2011
I just upgraded to 15 and was wondering if it was possible to specify which devices to prioritize a route through. I have my machine, a laptop, connected to my family's router for an internet connection and a wired connection to a personal router for a faster and private connection between my other two computers and a network storage device. Whenever the laptop is connected to my personal router everything goes through it and it can't connect to any external web sites. But when I unplug it and go only on my family's wireless everything is fine, except I can't connect to the storage device since it has no external connections.
View 11 Replies
View Related
Mar 11, 2010
I have a small business that I run Squid and Dansguardian on Ubuntu for network proxy filtering, among other things. This works great, but does not block SSL connections on Port 443, such as https proxies. I understand that this is because this type of configuration is a "transparent proxy".
Is there a way to set one up "non-transparent" and, would that filter https?
I cannot blanket block 443, because some sites need it.
I have read that one can re-compile Squid to work with SSL, but not being a super guru, not sure of the implications of doing that.
View 7 Replies
View Related
Oct 22, 2009
I've noticed that when I open firefox I get really strange HTTP and HTTPS connections showing up in firestarter (which as I understand it is just a GUI for IPtables). They connect to various bits of a site listed as 1e100.net (when you use "lookup hostnames") such as wy-in-f18.1e100.net, they stay connected all the time as far as I can see unless I close firefox. I've heard people say they are connected to Google, but I can close all tabs after loging out of google and still see them... it's very odd.
View 3 Replies
View Related
Nov 17, 2010
I have a local proxy server running on my computer, but I want to add a twist to it. I have multiple connections going through the proxy, but what I'd like to is that all outgoing connections Mac Address' will be different from the one the connecting systems. Mask or even alter them, if possible.
Yes, I know the idea itself sounds weird, but I'm attempting a few ideas for a project I'm working and I ran in to this problem. Please note that it's impossible for me to change the MAC Address' on the systems connecting through the proxy (they're gaming consoles, to be specific.)
I'm currently running the latest version of Ubuntu.
View 1 Replies
View Related
Mar 4, 2010
I'm trying to configure a reverse proxy for Oracle Database connections. What I have:
Host outside --> Reverse proxy --> Oracle Database
The "Revese proxy" has two IP, one for local and another for outside.I've tried with iptables, but unable.Now I'm trying with "redir".When I do a tnsping database, it works and says OK. But executing sqlplus user/pass@database, it tries to connect but time later I receive a timeout. What i do is a redir from port 1521 in "Reverse proxy" to 1521 in "Oracle database" why this doesn't work or any other way to do it?
View 1 Replies
View Related
Jun 16, 2009
Ive installed fc11 on my laptop (IBM lenovo R400). My work has a proxy which we must go through. I have set the proxy addresses in System Settings->Network Settings-> proxy. I have also run export [URL].. All seems to be ok, yum works from the command line, konquer goes out to the net just fine. However firefox wont connect to the internet no matter. The only way at the moment is to manually set the proxy in firefox.This doesnt seem right? Surely FF should pick up the system proxy? Does anyone have any ideas about this one?
View 3 Replies
View Related
May 31, 2010
There are two Fedora 12 systems which are now refusing to hibernate. The hibernation sequence seems to happen but then things hang indefinitely with a black screen and a blinking cursor, top left. I don't know where to start looking for clues; what do I look for in the logs, could someone please point me to a good hibernate/suspend troubleshooting guide?
One of the systems just recently got out of whack, for no apparent reason; it hibernated great for a couple of years, even as it went through upgrades from Fedora 9. The other stopped hibernating after its F9 -> F10 upgrade. This one lacks non-root hibernation permissions, but when I issue "/usr/sbin/pm-hibernate" as root, it goes through the motions and then hangs at black screen also.
View 2 Replies
View Related
May 30, 2011
I recently installed Fedora 15 now, and during installation I set the internet connection manually, then did update and after reboot, the internet connection settings have been removed. Now I can not set because the network connection to the Internet Connection is inactive. I mention that before the update was functional internet connection.
View 5 Replies
View Related
