Fedora Networking :: Connecting Android To Fedora Through SSH
Nov 30, 2010
I believe I have forwarded my port 22 correctly on my Belkin N+ router. I believe I have also set this computer to a static IP through the router. Is there a way to check or set up static IP and port fowarding on Fedora itself or is that all done on the router? I ask because when I use ConnectBot's ssh app on my android and connect from within the LAN to the computer 192.168.2.9:22 it says Connection lost, no route to host.
View 4 Replies
ADVERTISEMENT
Apr 29, 2011
I often connects my laptop (Asus EEE) to my HTC desire hd with the wifi hotspot. But this doesn't work since yesterday when I upgraded to 11.04. When I connect the laptop to the phone the screen on the laptop goes black with a lot of scrolling text then it freezes.
This worked out of the box without any problems with 10.10.
View 3 Replies
View Related
Nov 11, 2010
I am using fedora 14 on lenovo laptops and android 1.6 I created a wireless network on my laptop with create a wireless network. But it was not detected by my android 1.6 phone. Same wireless network created on my MacbookPro is detected by the phone.
View 2 Replies
View Related
Sep 2, 2011
I don't know what the problem is, I followed the instructions here: [url]
But like some other folks there, netcfg usb0 dhcp just eventually times out.
I have an htc evo and fedora 15.
View 1 Replies
View Related
Jul 31, 2011
i want to remote control my laptop with my phone via terminal
im trying to use this guide to connect my android phone to my fedora laptop via ssh and vnc, but the connectbot ssh connection is timed out
[URL]
however, this guide assumes a running ssh and vnc server, which isn't trivial to me, i think i have established these, but i don't know how to test it
also i am not shure if my router and firewall configuration is correct, i disabled wan blocking but didn't enable remote config management on my rooter, is that correct?
View 4 Replies
View Related
Aug 24, 2010
im trying to be able to tether my android cell phone to my fedora 13 to use as a router/modem i have gotten it to work on a friends Ubuntu OS i used the app easy-tether but it will work not on fedora
View 11 Replies
View Related
Nov 16, 2009
I dual boot Windows/Fedora 11 on my Dell Latitude D830 laptop, which has an Intel PRO/Wireless 3945ABG card and I have just bought a Linksys WRT160NL wireless router. I am currently trying to set up OpenWRT linux on the router. Because of the nature of my problem I have also posted this on their forum.I am having trouble connecting to my OpenWRT install via Fedora. Things seem okay in Windows, but when I try to connect from linux my laptop locks up completely and I have to hard reboot. I previously have never had any trouble connecting to any other router with this install of Fedora.
View 3 Replies
View Related
Jul 7, 2011
I'm a very experienced Java programmer, have a very basic knowledge about android and java networking.I need a basic idea about how to make a desktop application that connects to android cellphone through wi-fi ? What classes should I use ?
View 1 Replies
View Related
Jan 16, 2011
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
View 7 Replies
View Related
Aug 2, 2009
Got up this morning and switched on theLinux Box and started getting wifi connect problems. I could work for about 5 mins then it would start searching and asking me to confirm to connect to my network.After some time NM kept on asking all the time to confirm the network and key.I reset the router and check to see if other PCs were OK and a Windoze & Linux laptops were fine, no problem there so it's not the routerd.I'm wondering if the broadcomm card is starting to fail as it heats up or could it be a corrupt file or parametersNo updates have been done in the last month, it just started today. Here are the results from the log and dmesg:
[root@mylinux ~]# dmesg | grep b43
b43-pci-bridge 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
b43-phy0: Broadcom 4306 WLAN found
[code]...
View 10 Replies
View Related
Apr 15, 2010
I'm using ADSL modem (not router) and I can't connect to internet. The network manager and the pppoe-setup command doesn't work. So I'm asking some of the experienced users of fedora 12 to help me setup my connection.
Details: ADSL modem with pppoe connection (working fine on win xp)
View 4 Replies
View Related
Mar 4, 2009
I recently set up a network of computers via Ethernet, all of which use Fedora 10. I would like to be able to get any computer on the network to hook up to the internet.(I think the solution is now figured out - see below, on page 2, "problem solved")
View 14 Replies
View Related
Mar 27, 2009
How can I connect laptop to internet using GPRS enabled Phone?
Phone is Nokia 6600 slide. And laptop(Dell) has F10 installed.
View 7 Replies
View Related
Jun 13, 2009
I'm just staring with fedora 11 and I want to know how to do the following:
1- Connect to windows shares on another PC.
2- Set these shares to be accessible in the Computer location at all times.
View 2 Replies
View Related
Jul 10, 2009
I connected two machines, I have their given of the addresses ip in a static way and not with DHCP. I gave to the machine server the address: 192.168.0.1, and in the machine client the address 192.168.0.2.
View 5 Replies
View Related
Aug 10, 2009
using a text interface for my computing but I have run into an issue. Does anyone know of a CLI networking tool that will allow me to connect to a non-broadcasting network? I have tried cnetworkmanager and attempted wpa_cli. The first does not seem to support it and I have not played too terribly much with the second. I have discovered that when I boot my comps into KDE and tell NetworkManager to connect to the network cnetworkmanager can find it then, but that does me no good for what I want, which is to boot my computers straight to runlevel 3 and get connected. If it means anything I am running F11 on a Dell Inspiron 1521 Laptop with a Broadcom wireless card (awfully annoying to set up, but it is working fine) as well as F11 on a desktop of my own designing with a Netgear wireless adapter.
P.S. I realize that broadcasting the network would be the trivial solution but alas I am not the admin on the router and he is out of town.
View 6 Replies
View Related
Nov 12, 2009
I have a wireless USB (TP-Link TL-WN620G) adapter on F10( 2.6.27.38-170.2.113.fc10.i686). I have installed the drivers and it is detecting my router. But it keeps asking for network password with repeating a dialogue box although I entered correct password. I have configured the wireless configuration using NetworkManager.
View 6 Replies
View Related
Jan 23, 2010
The problem is that when I connect my phone to my machine FC11 x64 via USB and use the phone as a modem NetworkManager does not recognise the phone as a modem. The phone works well on my laptop which is FC11 32bit system, NetworkManager detects it and sets it up as eth2 and away I go, no problems at all. I would like to ask the community how can I go fault finding to find out why it does not work. #lsusb shows that the modem is being detected by the system but beyond this I don't know where to look and get things going.
View 1 Replies
View Related
May 5, 2010
When fedora initially starts up, the network manager shows all the available wireless connections available to me. However, when I select my wireless connection, it will go through the loading process where it shows the two green dots and the circular moving blue streak, then it prompts me to put in the wpa password.
This is where the trouble starts...when i input my wpa password, it will proceed to attempt to connect to my network but it never succeeds in doing so--it will keep on asking me to input my wpa password. when i finally get sick of doing it over and over again, i just hit cancel instead of retrying to connect.
After i stop trying to connect, the network manager no longer shows all the available wireless networks--the list is completely empty, and i can find no way to get the list to show up again, with the exception of restarting my computer.
I am able to connect to the internet with a wired ethernet, but id like my wireless to work.
View 3 Replies
View Related
Oct 31, 2010
I find it interesting that the only CLnetwork manager is nmcli(). Are there others you know and love?
I have been trying to use nmcli(), and I am having some difficulty.
When I run...
Code:
I get a great list of available wireless connections, but it seems to me I am not getting the 'right' information, or I do not know how to implement the information I am getting.
When I try to connect using the
Code:
It tells me, 'Unkown connection'.
So I wonder in the devices list is the SSID, in the single quotes, not the id the 'up' command requires? Or how do use the SSID? As far as the UUID, this option works for me, but I can only see the UUID if I had already once before connected to this connection. Is there any way to see the UUID of a new connection?
View 3 Replies
View Related
Apr 24, 2011
I am trying to connect my iphone 3GS to my netbook using Fedora 15, tethered via a USB cable. When I first plug it in, it recognizes it as a digital media player and pops up a dialog asking what I want to do, recognizes it as media with digital photos on it and pops up another dialog asking what I want to do, mounts the documents folder on the iphone and opens an file manager window, and adds an eth1 interface dynamically. The network manager recognizes it as a wired connection and tries to connect to it. This times out and the interface is left off.
This is so close to just working right out of the box. I really commend the Fedora team for this release. I am thinking of submitting this as a bug, but just want to ask here first, is there there something I don't know about the iphone which makes it unable to connect to eth1? Mentioned here was an ad-hoc network connection, is this mandatory for connecting to iphone through the USB cable? Ideally it would just connect to the cellular network and pull an IP, but I'm a newbie with this and am not sure about the level of security that affords me.
View 3 Replies
View Related
May 9, 2011
We have a mac book connected to our network. It can surf the web and even get into our network files. However, these network files are on linux, and finding the open files (not password protected) is fine. But we need the mac book to get into the protected files to edit our media. When we connect to the linux server, there is a pop-up asking for a login. We enter the correct credentials that work for everyone else to get into our protected files, but these credentials don't work... There is a message that pops up: "This operation cannot be completed because the original file '<file_name_here>' cannot be found." But it found the other open files...? what do we do to get this to work? The macbook is 'os x' and the linux server is 'fedora 10'
View 1 Replies
View Related
Jul 10, 2010
I just finished bringing up Apache and my own Web server and viewed my new site (all locally).My Windows 7 box and the Fedora box are both connected (physically) to my Netgear DGN2200, so they each access the *real* Internet thru it.What I'd like to do now is access the Linux box/Web site from my Windows 7 box through the DGN2200.
View 6 Replies
View Related
Feb 15, 2009
In fedora 10 I want to browse the share files in our windows network. When I want to use 'connect to server' with user name and password. It says:
"Cannot display location smb://servername/"
"No application is registered as handling this file".
View 2 Replies
View Related
Jul 16, 2009
i ahve just installed fedora 11 kde edition and i used to use fedora 10 after finish installation i edit the connectons to connect to my network im in lan network but i connect my cable to an access point to free using my laptop anywhere after adding every thing (wep key ,static ip's,) as i used to do and i have the connected sign at the system tray.i open the browser but no internet connection pinging the gateway returns "Destination Host Unreachable".
View 1 Replies
View Related
Dec 3, 2009
I am trying to connect my desktop to the internet via my Linksys wireless usb WUSB11v2.8 adapter. My network showed up in the Network manager as soon as I installed Fedora and it asked for my network key, but it still doesn't connect. It just keeps asking.I was reading that possibly the driver is not compatible with the OS. I heard about RPMs and the ndiswrapper program that supposedly is supposed to help with compatibility issues so I went and installed both via a direct ethernet connection.
I guess my question is now since I have these programs, what else do I need and how do I go about completing the installation? I pretty much need to be baby stepped by step into how to do this including the best place to install the software, what files do I need, and where and how if I even need to get my device's chipset.
View 14 Replies
View Related
Jan 5, 2011
I recently installed Fedora 14 on my machine. Ever since I cannot connect to the Internet at home.henever I plugin in the ethernet cable the ADSL router disconnects and all machines connected to the router lose connection to the Internet.
View 9 Replies
View Related
Jan 12, 2011
I am running fedora 14 and have tried to setup VPN access to work. I used the simple networking GUI program. Another engineer at work uses ubuntu and that is how he accesses the VPN. I think that I did everything right but get this generic 'VPN connection failed' message. I am trying to connect to a monowall firewall and have the IP address. Yes, I have an account but am just trying it for the first time. I turned on all of the options available which seemed correct based on the instructions that I had. I have contacted my sys-admin to try to find out what the monowall doesn't like. However, I am wondering if I might need to open an outgoing port on my linksys home router/firewall and, if so, which one?
View 2 Replies
View Related
Jan 18, 2011
I am having a Sony Ericssion Aspen M1i window's mobile which I need to connect as modem to my fedora 13 laptop....
View 11 Replies
View Related
Mar 7, 2011
Problem with fedora 13, I am no longer able set up a virtual private network using vpn. The following error message appers:
"/usr/sbin/vpnc: no response from target"
No problem when connecting with ubuntu or windows.
View 1 Replies
View Related
