Fedora :: Move 13 Installation To Another Disk ?

Jul 31, 2010

I have a pc with a very slow hard drive. I wanna move the whole content of this drive to a new drive.

View 1 Replies


ADVERTISEMENT

Installation :: Move Disk To Different Machine

Feb 4, 2010

Can one install Linux on a dedicated hard disk on one machine, then move that disk to another machine and boot from it? I know Windows won't allow you to do that, but can it be done with Linux?

View 9 Replies View Related

Ubuntu Installation :: Move 9.10 Disk To New Machine

Jan 27, 2010

I've been landed with a disk from a friend whose machine we've never managed to get into the BIOS of and tweak the boot order to include a CD drive.

I pulled the disk from my own system and ran a from-scratch install on this shiny blank disk with numerous of the tweaks I like and he'll need. (Getting pleased with how the time to usable is still dropping doing an install).

What I'm concerned about is sticking this disk in his machine and using it. I've gone with the sort-of generic 32-bit base even though both his machine and mine are Athlons. However, he's a musician and has some rather nice audio kit - as well as, I suspect, different video hardware.

Am I likely to hit noticeable problems? Is there some script I can arm myself with to rescan available hardware and update config, or can someone give a list of packages to completely remove then reinstall via the recovery boot?

I know the latter option may well cause some dependency problems that see stuff I've already installed lost - I can cope with that if I can get the GUI running smoothly.

View 1 Replies View Related

Ubuntu Installation :: Disk Failing - Need To Move GRUB

Apr 18, 2010

My boot disk is failing! I am a little nervous, so I'd like to have extra eyes on this so that I don't fubar it.

My setup is as follows, with WinXP and Ubuntu living on completely separate drives:

The boot disk (WinXP with grub2 on MBR) is failing. I need to replace it, pronto.

Do I need to get any data from the MBR on the failing disk before removing it?

Should I make the Karmic disk bootable and install grub on it before removing the failing boot disk?

Once I have Windows (re)installed on a new disc (which will still be /dev/sda) I want to install GRUB2 to its MBR and re-instate the old (current) boot options. How should I do this?

View 7 Replies View Related

Ubuntu Installation :: How To Move Grub To Internal Hard Disk

Jan 29, 2010

I have windows 7 installed in my internal laptop hard disk and I have installed Ubuntu 9.10 "the Karmic Koala - released in October 2009 and supported until April 2011", on my external hard disk. The problem I am facing is that the GRUB have been installed on the hard disk, for that reason if my laptop have restarted I need the hard disk to be attached to it to load the GRUB and to log in to windows. I need guidance in moving the GRUB to my internal hard disk or return the windows boot loader in charge, so I can boot my windows without the hard disk.

View 3 Replies View Related

Fedora Installation :: Installing On New Disk But Killed Old Install Of Fc8 On Another Disk

Mar 15, 2009

I have xp/fc8 on an older ide drive and just installed a new sata 1T and planned to put fc10 on it but in the process I killed my fc8 installation. I told the installer that the other disks were off limits but it was somewhat confusing at the bootloader page. So, I suspect that I told it boot off the fc8 disk. If that is the case is there a way to restore the fc8 install by somehow rescuing the /boot partition on the fc8 disk?

View 14 Replies View Related

Red Hat :: Move Var Which Is On The 8MB ROM To Hard Disk?

Mar 2, 2010

how to move var which is on the 8MB ROM to Hard disk? I have following scenario:

1/ On IBM powerPC with 8MB ROM and 64MB RAM

2/ Entire Linux 2.6.9 OS with application the image size is 5.1MB

3/ The image get flashed in to ROM and creates var directory on ROM area

4/ Recent upgrade with Hard drive for 60GB gave more storage power

5/ Hence, moving var on to hard disk IS first priority, so var store larger size of data and log, following is snapshot of content on ROM

Code:

bin etc lib proc sbin sys var
dev hdd mnt root share tmp var_init

My goal is ....

1/ Move var to hard disk with all its contents

2/ the IDE hard disk recognised by OS as hdd and mounted in ROM as directory

3/ Once var is moved on the hard disk then OS should look for all setting and data, log etc on hard drive based var directory hence kernel must look for all necessary files on hdd/var directory

4/ The original var could be remain on ROM but made empty and not to be used by OS.

5/ The entire OS on ROM area is READ only and cannot be deleted i.e. var directory hence only var contents moved to hdd/var directory.

6/ The file /etc/fstab is completely blank with zero size.

View 8 Replies View Related

OpenSUSE Install :: 11.1 - How To Move / To New Disk

Jul 17, 2010

I am using openSUSE 11.1. I recently installed an additional hard drive since running out of space. New drive up and running, used Yast Partitioner successfully.

2 questions as follows:

1) New drive still has Windows XP on one of its partitions..Can I easily implement/set up for dual boot?

2) More importantly, I need to move root ("/") of file system to new drive "sdb" since more space available but not certain correct way to do this

Below are listings I think are relevant:

View 6 Replies View Related

Ubuntu :: How To Move From One Hard Disk To Another

Jun 29, 2011

I have installed ubuntu on my 40 gb hard drive. I bought 160 gb hard drive and now i want to move ubuntu installation from 40 gb drive to 140 gb drive. How to ?

View 9 Replies View Related

Fedora Installation :: How Can I Install From Disk Or Do I Need To Get Another Disk?

Apr 20, 2009

i have been away from linux for a long while and decided to try it out again. i just received a fedora 10 dvd and went to install it.it wouldn't boot on either my laptop or pc?so i explored the disk and realised its a source disk?

1 = is the dvd disk any good to me?
2 = how can i install fedora from the disk or do i need to get another disk?

View 5 Replies View Related

Fedora Installation :: Easy Way To Move From F14 To F15?

Mar 19, 2011

What are the Easy Ways to go from Fedora 14 to 15?
a) Can I create a CD?
b) Online with Yum?
c) your Suggestions?

View 6 Replies View Related

Ubuntu Installation :: Move From Fedora 12 To 10.04?

Aug 8, 2010

I have Fedora 12 on a laptop and I want to move to Ubuntu 10.04 without losing anything. How do I do this? I find that Ubuntu is easier to use day in and day out on my other laptop than Fedora 12 is. There seems to be more support and help on Ubuntu as well. Thanks you for the help. I know I can backup files I want to keep to an external drive and then restore them in Ubunto, but is there anything else I need to know? Will Ubuntu see the Fedora 12 install and import items like it does from Windows?

View 5 Replies View Related

General :: Can Take Vm Instance And Move It To Bootable Disk?

Mar 17, 2011

The performance of my suse install under Virtual Box is starting to affect my work, and I really need access to my real multi core CPUs - can I take my vm and stick it on a bootable SD or external HD?I've read the howto move existing linux installation to usb-flash and make it bootable? but it didn't work for me (I'm not convinced I copied correctly).

View 1 Replies View Related

General :: Move Centos To Another Hard Disk?

Jun 3, 2010

Move centos to another hard disk?

My box is centos 5.4 x86 on one hrad disk. Now I have a problem at this hard disk, so I want to ove centos to another hrad disk.

But backing up centos and restoring them another hard disk is not so easy and takes so much time.

I heard Partimage" can backup hrard disk and restoring it to another hard disk.

[URL]

My box has one LVM composed 3 partitions on one hard disk.

Can I move centos to another hard disk with partimage?

View 7 Replies View Related

Fedora Installation :: SUSE Refugee Willing To Move To 12?

Jan 2, 2010

I am an actual openSUSE 11.2 user and i would like to switch to Fedora (probably 12).Now i have couple of questions i need someone answer for me please (they are quite crucial):

1. The possibility to unlock the luks crypt encrypted partition with a file, actually i have two important partitions with data on it (/home and stuff) which i unlock with a file on a pendrive, the /etc/fstab contains the by-id entry for the partition on the pendrive to unlock the /home and stuff partitions while /etc/crypttab has it like that:

cr_sdd1 something_blabla /media/disk/key luks

And it works. Now how would it look like in Fedora? I remember last time i tried it it works a bit different.

2. What about additional repositories (like KDE Beta or Factory, something like Packman in SUSE), how it looks like to subscribe to them. (rpmfusion is the right way for codecs etc. right?)

3. nVidia drivers, i have the 8800GT graphics card and i always installed it "the hard way" (which is in fact easy) but i remember there might be some problems with that in Fedora? How does it look like to install the drivers from the cli?

4. Installing applications, now that is a tough one, last time i wanted to install kate (word editor) i had to install whole group of applications since i couldn't install it "separately" is it true or did i do something wrong? And why PackageKit sucks big time? I remember trying to find a package kate in Fedora but it didn't succeed and had to install kde-sdk or something.

5. I love that i can have SElinux in Fedora what makes me a lot happier (i'm a bit paranoid and i like to keep my box secure even though it's linux ) How mature is that for desktop use?

6. Nouveau state, how does it work, does it stay on all the time or is it that if there are the closed drivers it switches to them after the initial booting?

7. Is there any graphical application to manage the applications in Fedora (except PackageKit because it sucks big time). I really like yum which is very friendly but is there any graphical front-end to this maybe?

View 6 Replies View Related

OpenSUSE Install :: Safely Move Bootloader To Another Disk ?

Aug 25, 2010

Ages ago I installed Linux on a "spare" 40GB disk and I don't remember how, but that disk is where I still boot the computer from, in Bios it's listed as a primary master and HD0.

Over the time my installs moved to the "main" disk where it is now Suse 11.3 alongside Windows.

I want to get rid of that original "spare" disk altogether, physically take it out, but don't know how to move the bootloader to the "main" one.

I'm confused by all the options offered in Yast Boot Loader Location menu.

Can I just tell it to put itself into a custom boot partition and point it to dev/sdb, the current designation of the "main" disk?

Would I need to edit Grub as well? I figure the current "sdb" would be called "sda" after I take the old disk out. Would it be safe to simply rename /sdb entries, things like /sdb4 to /sda4 and so on?

Additional question - I used to play with Win7 demo, deleted that now, but its loader still pops up when I boot into Windows with their "earlier version of operating system" menu. Their offered solution is to run "mbrfix" from a WinXp recovery CD.

My question - what would that mbrfix do to the Linux bootloader and how can I get it to point back to to Grub afterwards?

View 9 Replies View Related

Ubuntu :: Move Firefox And Thunderbird Settings To Another Disk?

Feb 4, 2010

It appears that my HDD is failing at the moment, so I'm going to replace it by two new disks (RAID1) over the weekend.
At the same moment I'll stick in another 6GB RAM. Because I'm currently running the 32-bit system, I'll be upgrading to 64-bit (doh).

Now then, is it possible to copy all Firefox and Thunderbird settings (settings, accounts, bookmarks, cookies etc) over to the other disk?
If so, which folder(s) do I have to copy?

View 4 Replies View Related

Ubuntu :: Startup Disk Usb - Could Not Move Syslinux Files ?

Mar 4, 2011

In /media/....Directory not empty, maybe "/temp/..." is not an ubuntu image

I'm having this problem trying to load a gparted live ISO onto a usb drive. I want to resize my current extended partition so would rather dl just the gparted ISO than the Ubuntu one as it's taking ages (really slow).

I've tried downloading the gparted ISO a couple of times as I thought the dl might have been corrupted but I can't create a startup disk from the ISO.

(can I use an Ubuntu 9.0.4 live cd for gparted on my 10.04 build? )

View 1 Replies View Related

CentOS 5 :: Move User's Home Directory To A Different Disk?

Oct 20, 2009

I would like to move a user's home directory to a different disk. Is there a "clean" way to do this? Specifically, is it safe to just copy all the .* files to the new destination and then change the home in the user config? Or are there maybe environment entries with absolute paths which will cause problems with this strategy?

View 5 Replies View Related

Ubuntu :: Move The Recovery Partition To The Beginning Or To The End Of The Disk Without Breaking It?

Mar 4, 2011

I have an Asus eeePC 1001PX which I have installed Linux to. With a 160 GB hard drive, space is limited, which makes it a problem for me that Asus has chosen to place the 16 GB Windows Recovery partition (which I intend to keep in case of emergency or sale) in the middle of the disk, essentially preventing me from partitioning the disk to my liking with one partition taking up the entire drive (except the space used by the recovery partition. Is there any way to move the recovery partition to the beginning or to the end of the disk without breaking it?

View 4 Replies View Related

Hardware :: How To Move Boot Sector From SCSI To SATA Disk

Jul 5, 2010

I have three disk in my system. One SATA (250GB) and two SCSI (73GB) disks. The Two SCSI disks were installed originally and RHEL3 is installed on it. The SATA disk is installed a few years later with RHEL5. As you can see below, the boot sector is still on one of the SCSI disks (sdb1).

Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 236545184 15259760 209075624 7% /
/dev/sdc2 68539636 4578792 60479160 8% /users
/dev/sdb1 101089 26847 69023 29% /boot
/dev/sdb3 68437272 36963704 27997104 57% /RHEL3U7
tmpfs 2025916 652 2025264 1% /dev/shm

How I can move the boot sector from the SCSI disk (sdb) to the SATA disk (sda) without losing data and without re-installation?

View 6 Replies View Related

Fedora Installation :: Preupgrade To Move From Fedora 14 To 15

Aug 22, 2011

I did preupgrade to move from Fedora 14 to 15. Everything went fine until the end when I got the error message: Insufficient disk space, 0 M on boot.

I guess I would have expected the "preupgrade" software to have checked this before doing the install. But anyway, is there a way to get past this? If not, is there a way to get back to 14 without wiping the disk (obviously not my intent since I went the upgrade route).

View 2 Replies View Related

Fedora Installation :: Setup Dual Bood Data Partition And Move /home?

Feb 21, 2009

I have just spent dome time using gparted to sort out my partitions. I have a vista partition, a fedora one and a big chunk of unallocated space I wish to use as my data drive.

I want to move my ~ folder to the new partition and have windows/vista access the folder and write to the Documents, Downloads folders etc.

What is the best format to use?

Also I plan to start backing up my partitions to a server, for instance using g4l to save a linux image (maby a windose one too). Is there any benifit in keeping all the hidden files (ones starting with period '.') i.e moving the whole ~ folder or would I be best off leaving the ~ dir and moving the folders I know i use such as ~/Downloads, ~/Documents etc?

And how should i preform the move of all these files? 'mv'? do i need to add any special options?

View 3 Replies View Related

Fedora Installation :: Lockup At First Boot Screen - Can't Move The Mouse And Keyboard Doesn't Work

Jun 11, 2009

I downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.

View 11 Replies View Related

Fedora Installation :: Install Kernel Headers And Devel From Installation Disk ?

Feb 8, 2009

Ive also tried downloading RPMs to a usb stick and it said it was the wrong ones for my machine.

How do i find out if my machine is x32 x64 x86?

Anyway im trying to install kernel headers and devel from the fedora installation disk but i dont know how to get to the cdrom thru terminal as i cant copy the RPMs to desktop by drag n drop or using software installer.

I dont have an internet connection to the pc so i cant use yum (which would make things so much easier) so can anyone tell me how how to install these packages thru terminal?

View 5 Replies View Related

Fedora Installation :: Hard Disk Installation - Documentation Keeps Crashing

Oct 10, 2009

How to install either Fedora 11 or 12 from the hard disk of this old ragged laptop? USB or CD installation are not an option, and since the documentation keeps crashing and I stagger saliently in the messy script that is hid behind the windows interface runtime gimmick, I would like to know which switches would make the rebooting operation take to reckognizing the linux package?

View 1 Replies View Related

Fedora Installation :: Fedora Disk Requirements - Need 9 GB Of Disc Space

Jan 19, 2011

I was reading the fedora Disk requirements and it said you need 9 GB of disc space. Which partition should this 9 GB of space be on? I plan on having a / root partition, /home partition, a swap partition, and a /boot partition.

Quote: 1.2.3. Hard disk space requirements for all architectures The complete packages can occupy over 9 GB of disk space. Final size is entirely determined by the installing spin and the packages selected during installation. Additional disk space is required during installation to support the installation environment. This additional disk space corresponds to the size of /Fedora/base/stage2.img (on Installation Disc 1) plus the size of the files in /var/lib/rpm on the installed system.

In practical terms, additional space requirements may range from as little as 90 MiB for a minimal installation to as much as an additional 175 MiB for a larger installation. Additional space is also required for any user data, and at least 5% free space should be maintained for proper system operation. [URL]

View 2 Replies View Related

Red Hat / Fedora :: Move Hard Drive Installation To External Drive?

Mar 30, 2011

i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..

View 2 Replies View Related

Fedora Installation :: Cannot Commit To Disk Sda After 5 Attempts?

Jun 9, 2009

When i try to partition the disk i get this error, on the live and the install dvd. I have googled but have not found solution?"cannot commit to disk after 5 attempts"

View 14 Replies View Related

Fedora Installation :: Dynamic Disk - Can't See The Partition ?

Nov 28, 2009

First of all I am a long time Fedora user and now I need help getting it on my laptop. It has Windows 7 loaded (no Windows cd) and a 500GB dynamic disk. I shrunk and re-partitioned but Linux can't see the partition I made for it. I want to save Windows and had this brainwave lol. I was wondering if I could copy c:*.* to a USB drive; delete partitions and re-partition with basic partitions. Then install Linux on say the third partition; then using Linux copy Windows files from the USB onto the new C partition. Then using my Recover dvd's repair Windows. Great idea right? But I bet it won't work; any thoughts?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved