When I open Konqueror, on Fedora 15 KDE, it opens to the default Start Page just fine. When I try to visit any other website, it gives me an Unknown Host Error. The documentation I found for KDE just said that if I get that error, it means that either the website does not exist or I am not connected to the internet, but I'm quite sure I'm connected to the internet.
View 6 RepliesMany of mails sent from my mail server that are in Queue;The main reason is deffered by domains like yahoo,aol,etc.but there is one more error that i keep getting and that is Host Unknown,Below is an example from mail log,The catch is,test mail sent on the same email id sent from my personal mail from the same server i.e. url was deliveredHowever,another mail containing client information sent from customercare@mycompanysdomain ended up in queue.
There are more examples of the same,around 20 domain have the same problem.
Sep 7 14:33:46 server2 sendmail[24591]: n8793jiC024589: to=<abc@xyz.fi>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=163672, relay=xyz.fi., dsn=5.1.2, stat=Host unknown (Name server: xyz.fi.: host not found)
Sep 7 22:09:42 server2 sendmail[6407]: n87Gdffa006403: to=<abc@def-fgh.com>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=152474, relay=def-fgh.com., dsn=5.1.2, stat=Host unknown (Name server: def-fgh.com.: host not found)
I installed Gnome on my server by when I run
Code:
[root@F026 ~]# startx
Code:
hostname: Unknown host
xauth: creating new authority file /root/.serverauth.2915
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.1.el5 i686
[code]...
I don;t have physical access to the system and it is a server located in Europe. Fedora release 10 (Cambridge) is installed in it.
Even ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
When I send mail via Evoultion it does seem to send ok but still the following error message comes up: Error while sending message. Failed to append to : Unknown error Appending to local 'Sent' folder instead. Not sure what's up with that but thought I would mention it.
View 3 Replies View RelatedI am installing ISPconfig on a Ubuntu server 9.10. When i write hostname -f i get the unknown host message.
View 4 Replies View RelatedI am using comcast ISP with DHCP.
When I type in hostname -f it says unknown host
in /etc/sysconfig/network
hostname=servix.example.com
in /etc/hosts
127.0.0.1 servix.mydomain.com localhost localhost.localdomain
192.168.1.101 example.com www.example.com
in /etc/resolv.conf
search servix.mydomain.com
COMCAST SNS SERVERS
nameserver 192.168.1.1
In linksys router I have host as servix and domain as example.com. So why is it returning unknown host?
I can lookup DNS hostnames with dig and nslookup, but nothing else seems to be able to resolve anything. ping, telnet, Firefox, everything gets "unknown host".
For example:
> dig yahoo.com
; <<>> DiG 9.6.1-P2 <<>> yahoo.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 20438
;; flags: qr rd ra; QUERY: 1, ANSWER: 3, AUTHORITY: 13, ADDITIONAL: 0
;; QUESTION SECTION:
;yahoo.com.INA
;; ANSWER SECTION:
yahoo.com.17579INA209.131.36.159
yahoo.com.17579INA209.191.93.53
yahoo.com.17579INA69.147.114.224
;; AUTHORITY SECTION:
.10071INNSL.ROOT-SERVERS.NET.
.10071INNSI.ROOT-SERVERS.NET.
.10071INNSH.ROOT-SERVERS.NET.
.10071INNSF.ROOT-SERVERS.NET .....
> ping yahoo.com
ping: unknown host yahoo.com
> ping 209.131.36.159
PING 209.131.36.159 (209.131.36.159) 56(84) bytes of data.
64 bytes from 209.131.36.159: icmp_seq=1 ttl=55 time=97.2 ms
64 bytes from 209.131.36.159: icmp_seq=2 ttl=55 time=98.9 ms
I am using ubuntu 9.10 and I still cannot figure out this thing. I work behind a proxy managed by my university. Now, I cannot ping the other users on my network although they can ping me. Not to mention, I also cannot ping [URL]... It says : ping: unknown host [URL]... But I can ping the proxy server.
View 4 Replies View Relatedthis issue which has suddenly occurred on both my Desktop and my Laptop. When I try to configure an IP address to any interface I get the following error....
uadmin@Ubuntu:~$ ifconfig br0 addr 192.168.10.1/24
addr: Unknown host
ifconfig: `--help' gives usage information.
uadmin@Ubuntu:~$
I get this for ethernet interfaces as well. I do not understand what is different as I was able to configure the ip address only the day before yesterday on the laptop..? The Desktop has had this issue for about 3 weeks now.
br0 Link encap:Ethernet HWaddr 32:70:40:91:06:25
inet6 addr: fe80::3070:40ff:fe91:625/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code]....
I've encountered a problem after doing a fresh install with xubuntu 10.10 (2.6.35-23-generic).some sites are blocked like [url]....if I do dig [url]....- I receive the A, CNAME records and the IP address and everything.when ping[url].... - I receive 'unknown host'.when ping <theipaddress> - I receive responses
View 2 Replies View RelatedI want to find out my IP and I test this code from beej tutorial:
Code:
char hostname[128];
int i;
struct hostent *he;
struct in_addr **addr_list;
struct in_addr addr;
gethostname(hostname, sizeof hostname);
printf("My hostname: %s
", hostname);
he = gethostbyname(hostname);
if (he == NULL) { // do some error checking
herror("gethostbyname"); // herror(), NOT perror()
return 1;
} // print information about this host:
printf("Official name is: %s
", he->h_name);
printf("IP address: %s
", inet_ntoa(*(struct in_addr*)he->h_addr));
printf("All addresses: ");
addr_list = (struct in_addr **)he->h_addr_list;
for(i = 0; addr_list[i] != NULL; i++) {
printf("%s ", inet_ntoa(*addr_list[i]));
}
printf("
");
return 0;
But my output is this:
Code:
My hostname: vBx
gethostbyname: Unknown host
I heard that it works in windows, why isn't working in linux?
I'm having an issue configuring eth0. I'm using ubuntu 8.10 in a virtual machine (VirtualBox). The correct adapter is being used and it has worked in the past. I've tried placing eth0 in dhcp through the GUI and bash, but always get a 169 address or 127.
When I run the following command:
Code:
The output is:
Code:
i am trying to compile kernel 2.6.23 on Fedora 12 After fixing a few bugs (getline error, %dil ,etc) i was able to compile the kernel made initramfs img using dracut updated grub and then booted up the new kernel 2.6.23 but it fails to boot with following error mount: unknown filesystem type 'ext4'
View 8 Replies View RelatedI am using Gstreamer for creating one of my video streaming application. My application creates multimedia session and then stream around 200 video sessions (a very processor intensive job).In doing so, the no. of threads created is around 1500 and I have given around 1536 KB as my stack size for each of these threads. I have one Quadcore(intel Xeon) system of around 8 GB of RAM(64 bit) with RHEL 5.5(kernel - 2.6.18-92.el5). After few hours of testing I see that my overall memory(RAM) is eating up. I did checked the memory and I saw that my cache size is growing. So far so good, as I can understand that system does cache instead of leaving some RAM free.
My problem comes, when I see that after almost 20-25 hours of testing, RAM is continuously being eaten up and maximum part of that is going into cache. If I leave the system for few more hours I see whole of my memory is consumed up and now my swap started getting used. If I check the cache now, I clearly see most of RAM is now in form of cache. I still didn�t stop my application and allowed it run for few more hours and after sometime I see that process give segmentation fault while creating the pthread (create_pthread::unknown error 513).I also tried to observe the �core� file of application created in this way , but it doesn�t� show anything.
One thing I must mention that, in �top� I see almost constant values of resident memory, virtual memory and shared memory. There is no increase of memory usage here. So here I can assume that my application is not leaking the memory. I also observed that if I kill my application any time during this, the memory doesn�t go into free pool. Anyone, here can give any pointer for this kind of behavior. Is it can be because of some kernel BUG which is not freeing the memory to application usage.
I've been using cyrus and sendmail together for a very very long time now. Just recently I upgraded to fedora 13 and now my virtual users can not send email from the /etc/sasldb2 passwords. I get in the /var/log/messages sendmail[31427]: unable to open Berkeley db /etc/sasldb2: Unknown error: Its weird that they can still log in and get email from imapd.conf
sasl_pwcheck_method:auxprop saslauthd
sasl_auxprop_plugin: sasldb
sasl_mech_list: LOGIN PLAIN CRAM-MD5 DIGEST-MD5
[code].....
I even tried re-creating sasldb2 and sasldblistusers2 shows my two users 'one' that is also a local user account and the saslauthd authenticates when sending emails, but the virtual user 'two' can't send just only can log in to receive. /etc/sysconfig/saslauthd is set up as mech=pam. but I don't see how that would be relevant to this issue.
i get the following error when i try to install autoten: root@Tex dan]# rpm -Uvh [URL]... curl: (6) Couldn't resolve host 'dnmouse.org'
error: skipping [URL]... - transfer failed from reading other posts, it sounds like a dns error, but i don't know what to do to fix it.
I am cross compiling a linux kernel for the mips platform. I have installed the tool chain and everything. When i try to build the kernel i get the following error message.
HOSTCC -static scripts/basic/fixdep
scripts/basic/fixdep.c: In function traps
scripts/basic/fixdep.c:377:2: warning: dereferencing type-punned pointer will break strict-aliasing rules
scripts/basic/fixdep.c:379:4: warning: dereferencing type-punned pointer will break strict-aliasing rules
[Code].....
If i set up the toolchain on a fedora 13 machine with the exact same procedure, the cross compilation works fine. I can't figure out how this can be fixed. I am currently considering downgrading to fedora 13 due to this.
Funny problem just began occurring in Debian Lenny.
If I use Konqueror to start Konsole (by pressing F4) and then run:
perl -le '{print "hello"}'
The result is:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
hello
If I start Konsole directly, I do not receive any such errors.
I am trying to share directories between two F12 machines on a local network with a router box doing DHCP because not all machines on all the time. Web access is fine and local ping and ssh works but telnet doesn't. I have never succeeded doing mounts. So I have been searching for things to fix the above and have just tried rpcinfo. If I do this :
rpcinfo -p 192.168.2.2 it gives rpcinfo: can't contact portmapper: RPC: Remote system error - No route to host. Does that suggest that actually there is an installation problem? So I tried "yum provides portmapper" and that gives "No Matches found".
Whenever I try to change a user full name, through System / Administration / Users and Groups, I get the following error: The configuration could not be saved - An unknown error occurred. Running Ubuntu 10.04.1 LTS 64 bit, freshly installed.
View 2 Replies View RelatedIve got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
When i try to add value 150 on portflood section of csf,i get following error:
iptables: Unknown error 18446744073709551615 PORTFLOOD tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 tcp dpt:80 state NEW recent: UPDATE seconds: 5 hit_count: 150 name: 80 side: source
Error: iptables command [/sbin/iptables -v -A INPUT -i ! lo -p tcp --dport 80 -m state --state NEW -m recent --update --seconds 5 --hitcount 150 --name 80 -j PORTFLOOD] failed, at line 996
how is limitation with ip_recent where highest value for hit_count is 20,and how i need to modify and recompile ip_recent.But i was not able find anything about either modify or recompiling that module.I have cent os 5.4 64 bit,iptables are installed over yum.Also i have 4 servers with completely identical configuration,yet on two servers portflood works while on other two it reporting that error.Maybe it was different install cd which caused this,but again i dont know why this doesnt work since iptables version are indetical.
Skype now runs, but there is an error when attempting to use voice. When opened in terminal the error is thus: ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default Over and Over again. Am I missing a 32 bit library on my 64 bit machine? EDIT: Smiley face not intended
View 4 Replies View Relatedwhen i try to install a .rpm after the installation is finished it appear "installation failed: unknown error"
View 6 Replies View Relatedif it is physically possible to remove Konqueror from KDE in Fedora 11 without damaging the system.
View 4 Replies View RelatedIn a script that I run manually after I have logged in, I have the following:alias kq='konqueror &' The intention is to run konqueror in the background. What happens is as follows. A. I run kq; it starts konqueror but does not return to the command prompt. I quit konqueror. B. I run kq again ; it starts konqueror and this time I get a the command prompt. If I quit konqueror and run kq for a 3rd time it behaves as in A. Quit and run it behaves as in B, and so on..
View 3 Replies View RelatedI am sure of this what about you?
View 1 Replies View RelatedI have been trying to transfer my Bookmarks from Firefox to Konqueror and am not having much luck. I have just loaded KDE onto Fedora 14 and am having quite a bit of fun going through all the different items in it . I would like to use Konqueror with all my previous Bookmarks in Firefox
View 2 Replies View RelatedI have a problem with Transmission. After using it for over six months without a single problem, it suddenly stopped downloading. In the torrents that do no get downloaded, I get an error message Tracker responded: Unknown error (0) in the info window, tracker tab. But there are torrents with the same tracker that don'thave a problem and get downloaded fineThe logs don't give a clue about whats wrong either.I tried downloading those torrents with Vuze and I had the same problem. What could be wrong?
View 2 Replies View Related