Fedora :: K3B Not Working After Upgrading To F14
Mar 4, 2011
Earlier in the week I ran the upgrade to move from Fedora 12 to Fedora 14 on my home workstation. After a bit of fussing I managed to get things working for the most part. The problem I have left is a show stopper for me though. I can't get k3b to work right since the upgrade. I primarily use it to copy video dvds that I've created. The first disk that I tried to copy was a dual layer disk and although it fussed about not being able to umount the disk it was able to copy it ok. Then I tried to copy a single layer dvd and can't seem to get that to work. Right away I noticed that it was reading the disk very slowly.
About a meg a second which is a LOT slower then it used to. It then didn't eject the source disk when asking for a new disk which was it's previous behavior. When I put the blank disk in the write failed immediately with an error about not having permission to write to the device. After a bit of fussing without luck to get past that I decided to try and write the disk while running k3b as root. That got me past the permissions problem but still the write failed immediately. I do need to iron out the permissions issue that currently is forcing me to do this as root but my immediate need is to be able to burn disks again.
View 3 Replies
ADVERTISEMENT
May 13, 2011
before upgrading I had 10.04 I used to listen to some radio stations in firefox but now after 11.04 and firefox4.0.1 it seemed vlc has stopped working.I am using. Linux mark 2.6.38-9-server #43-Ubuntu SMP Thu Apr 28 15:40:34 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux.
View 9 Replies
View Related
Apr 9, 2011
After upgrading to 5.6 I was trying things out and noticed for some reason the php on my server has stopped working. Anybody have a clue what's wrong ? I did read the release and it did mention the upgrade would then change my php.
View 12 Replies
View Related
May 7, 2010
flash sound problems after upgrading to 10.04 i found i had problems with flash and sound. this was caused by having two versions of flash plugin installed in firefox one of which wasn't appearing in package manager to check how many versions are installed in firefox address bar type about:plugins if there are more than one entry for flash player enter the following into a terminal rm ~/.mozilla/plugins/libflashplayer.so more details and other possible fixes can be found here: [URL]
View 1 Replies
View Related
Aug 6, 2010
I have a double boot system in my comp. I tried to make some upgrade in Ubuntu but everything went wrong and It's not working anymore. I can login but nothing is working. What are your suggestions in this case?
View 4 Replies
View Related
Apr 30, 2011
I have upgraded to ubuntu 11.04... but after that i m not able to view full graphics of ubuntu.. desktop seems very dull. whenever i try to open my nvidia x server setting from system-> administration it says " You not appear to be using Nvidia X drivers".. Unity is also not working.. using ubuntu old theme,,
View 9 Replies
View Related
May 4, 2011
I've just upgraded my Ubuntu installation to 11.04 and my bluetooth mouse (Logitech Bluetooth Laser Travel Mouse) is not correctly recognized at start-up. Every time I restart my computer I have to run the following commands in a terminal
Code:
sudo killall bluetoothd
sudo bluetoothd
and then remove and set up the bluetooth mouse (using an auxiliary USB mouse, of course ) through the bluetooth preferences dialogue.how to carry out the remove/set-up process using a non-interactive shell script?
View 6 Replies
View Related
Jul 2, 2011
I have installed Ubuntu 8.10 from ubuntu 8.10 i386 Desktop DVD.Now I am trying to upgrade to Ubuntu 9.04 by update manager. but it always say upgradation fails. what to do now. how can i upgrade it to 9.04 and so so upto 11.04.
View 2 Replies
View Related
Aug 14, 2011
I upgraded my Ubuntu 11.04 laptop to kernel 3.0.1 and when I try to start Conky using my custom conkyrc, the conky process dies. I played around with it and discovered (through trial and error testing) that the code for the CPU temperature crashes conky. It worked before the upgrade. how I can get the CPU temp monitoring working again in kernel 3.0.1? Here is the code that is crashing conky:
[Code]....
View 9 Replies
View Related
Jun 6, 2010
I have a client who was using samba 3.0.21a, and there was a single printer being served, well as as quite a few shares. I recently upgraded to samba 3.3.4, and they have reported back that the printer is no longer working. Everything else is OK.
Does anybody know off the top of their head what has changed that would cause it to stop working?
Here is the relevant portion of the config:
Code:
server string = Printers
workgroup = XXX
security = user
smb passwd file = /usr/local/samba/private/smbpasswd
[Code].....
View 3 Replies
View Related
Jan 22, 2011
After upgrading my Acer extenza 5620z to debian squeeze(kernel 2.6.32-bpo.5-686) left click was not working on my SynPS/2 Synaptics TouchPad,allthought moving the cursor was working !
I went to debian channel on irc and there was someone who told that I should install a patch [URL] to correct this problem but when I restarted the whole touchpad was not working !!
Here is the output of dmesg [URL]
View 14 Replies
View Related
Sep 6, 2011
My setup is an HP OfficeJet 4315 All-in-one on a Debian box with the clients using XSANE on Windows boxes.
After upgrading to Squeeze, none of the clients could see the scanner.root could see the scanner from the Debian box.non-root users could not see the scanner from the Debian box.
Obviously, something was wrong with the permissions. After a lot of digging, I found that the /dev entry for the 4315 was owned by root.lp with no world write access.
My solution was to add the saned account to the lp group. I figured that was the most security-conscious way to fix it.
The remote clients can now see the scanner, so everyone is happy.
This may not work for every installation, but for all-in-ones, it probably will.
View 1 Replies
View Related
Mar 1, 2010
If you find Abiword and Gnumeric are not working after upgrading libgoffice-0.8 a quick fix is by creating the following link:
Code:
cd /usr/lib
ln -s libgoffice-0.8.so.8.0.0 libgoffice-0.8.so.7
Abiword and Gnumeric are now working as before.
I found this from the following bug-report:[URL]
View 2 Replies
View Related
Mar 21, 2011
After upgrading to firefox 4 rc, scim stop working. When ctrl+space pressed, nothing happened. (with latest scim package:
[Code].....
View 6 Replies
View Related
Jul 6, 2010
I have a use case where in I am trying to build a yacc program using bison. When I run this on SLES 9, I get errors. But the same works for me fine on a SLES 10 system.
The versions of bison, glibc are different. Hence I moved the rpms from SLES 10 machine to SLES 9 and did a rpm2cpio of these 2 to a temporary folder and did a export of LD_LIBRARY_PATH. When I try to run the program ( ./bison) I am getting a segmentation fault. I have the following questions :
1) IS the scenario what I am trying to do - using a newer version of libc( from sles 10) to sles 9 supported ?
View 1 Replies
View Related
May 1, 2014
I recently updated my Debian jessie system (for the first time in a few months). It broke my video driver (fortunately a dpkg-reconfigure fixed that) and my wireless driver (forget how I fixed that...), and my sound. ALSA still thinks I have an output device, I've set volumes all the way up in alsamixer.
In vlc and firefox, I can't hear anything using the default audio out (which I think is pulseaudio), nor can I hear anything if I ask them to use ALSA output directly. I've tried rebooting, killing/manually starting pulseaudio, etc to no avail.
I think it was either the kernel upgrade (went from 3.10 to 3.13) or a configuration option in some sound subsystem that broke. To be clear, sound was working perfectly before the upgrade. My machine is an Ivy Bridge-era Zenbook.
View 2 Replies
View Related
Nov 28, 2010
I got an error during the upgrade but chose to let the upgrade complete. Now my Firefox won't lauch. I tried uninstalling and reinstalling it from the Terminal and got the following:Quote:
rick@Desktop:~$ sudo apt-get install firefox
[sudo] password for rick:
Reading package lists... Done
[code]...
View 1 Replies
View Related
Sep 29, 2010
i am trying to upgrade to ubuntu 10.04 from 8.04, and am getting this warning:"Upgrading may reduce desktop effects, and performance in games and other graphically intensive programs.This computer is currently using the AMD 'fglrx' graphics driver. No version of this driver is available that works with your hardware in Ubuntu 10.04 LTS.Do you want to continue?"should i continue? i have no idea what a 'fglrx graphics driver' is
View 4 Replies
View Related
Apr 18, 2011
Upgrading from 10.10 to 11.04 "WIRELESS NOT WORKING"?
View 1 Replies
View Related
Jul 30, 2010
I would like to know if it is possible to upgrade directly from Fedora N to Fedora N+2.
In the Fedora 11 documentation, it was said clearly that it was not possible to upgrade from 9 to 11. The Fedora 12 documentation was buggy, see #547070 In the Fedora 13 documentation, it is only mentioned from Fedora 12 to 13, but it's not clear whether one can upgrades from F11 to F13.
I mean, look at the bugzilla above.
In response to the Fedora 11 documentation which said:
Quote:
It is not possible to upgrade directly from Fedora 9 to Fedora 11. To upgrade Fedora 9 to Fedora 11, upgrade to Fedora 10 first.
Ruediger Landmann said:
Quote:
The Fedora 9 --> Fedora 11 problem was an issue specific to that release; it's no longer relevant.
So, if it's no longer relevant, one would think it is now possible to upgrade from Fedora 11 to Fedora 13.
By the way, how can I re-open a bugzilla?
View 3 Replies
View Related
Mar 24, 2010
I am planning on doing an upgrade on one of our systems from Fedora Core 7 to the Fedora Core 12 distribution. I have read Bruce Byfield's article "Upgrading to the newest Fedora release", and the approach that I am planning on taking is the upgrading via the DVD medium.
View 7 Replies
View Related
Jan 29, 2009
I'm trying to upgrade PHP on my Fedora Core 6 web server. I currently have 5.1.6, all I need is verson 5.2 or higher, it is a requirement of some software I want to install. I am not really a server admin or very Linux savvy, I've been able to get around doing what I need to use this a web development server, but trying to do this is beyond me. I tried updating using yum, but I guess the latest version in the Fedora Core 6 repositories are 5.16. I've never really dealt with installing binaries, so I am stumped as to how to get this done.
View 1 Replies
View Related
Nov 22, 2009
I had downloaded a DVD disk with Fedora 12 on it (~3.7 gig) therabouts. I used it to upgrade my F11 system to F12 or so I think. Well to make a long story short, it had installed approx 1435 files on to my computer. I never so it finish up the process because my moniter timed out and I could get it back on after it had blanked out. So I rebooted the computer (after I had removed the DVD). It showed F12 booting up but the splash screen with logon was F11's. After I logged on my nvidia driver was gone along with compiz and Avant. So I followed 'leigh123linux' response on 'Nvidia' and get it reinstalled and working along with Avant, and compiz and my rotating cube desktop. I did a yum clean to cllean up the packages and ran yum update again to refresh what may have not been installed. It show a couple hundred packages needed to be upgraded and also had alot of 'dependency' errors' for a lot of the packages. That's where I stand now. Is it 11 or still 12? Did the DVD upgrade work? Who nows.
View 2 Replies
View Related
Dec 1, 2009
I had fedora 10 a while back,and when fedora 11 came out a few days later my PC prompted me to upgrade.. all from desktop.. clicked one button and that was it, 10 minutes later it was upgraded... perfect.
This time, I'm sat on fedora 11 looking at the timeline for the 12 release, it gets released and i'm still waiting for 11 to tell me i can upgrade... I know I can upgrade manually, but im quite interested as to why it hasnt asked me automatically this time.
Maybe something in my config is stopping it?
View 8 Replies
View Related
Oct 13, 2010
we want to upgrade the kernel on Fedora 12 .but problem is , while doing 'make install' , it gives error as 'mkinitrd' is not available .which is required during 'make install'how to run 'make install' command on Fedora 12 without 'mkinitrd' utility.
View 9 Replies
View Related
Nov 3, 2010
Anyone having problems with flash after upgrading to F14? Was working fine on F13, but now on F14 it crashes - can't even load the flash test page. This is on a 64bit laptop upgraded from F13->F14 and running the 32bit adobe flash plugin with nspluginwrapper. When I browse to a page with flash in it I can see flash suck up 100% CPU and then crash. Seeing messages like these in the .xsession-errors:
Code:
*** NSPlugin Wrapper *** WARNING:(../src/npw-wrapper.c:1977):invoke_NPP_GetValue: assertion failed: (rpc_method_invoke_possible(plugin->connection))
*** NSPlugin Wrapper *** ERROR: NPP_Write() wait for reply: Message timeout
*** NSPlugin Wrapper *** WARNING:(../src/npw-wrapper.c:2239):invoke_NPP_DestroyStream: assertion failed: (rpc_method_invoke_possible(plugin->connection))
[Code]...
View 9 Replies
View Related
Nov 20, 2010
yesterday I've decided to upgrade my distro from F13 to F14 using preupgrade. There were no errors during installation, but after first boot I've noticed glitches in GTK widgets in GDM and other windows after logon (strange white strips on buttons, progress bars and more). Moreover there were even worse glitches in gnome-do. I've attached two screenshots to show exactly what I [URL] I think this is a problem directly connected with upgrading the distro as there are no mentioned glitches when running standard live version of Fedora 14.
View 2 Replies
View Related
Jan 19, 2011
I am running Fedora 13 and have VirtualBox 3.2 installed. I see in yum list that VirtualBox-4.0.i686 is available but apparently I do not get updated to this version running yum update. How can I update to VirtualBox-4.0.i686 ? I uninstalled 3.2 and simply installed 4.02 and everything worked fine. Previous virtual machines are compatible and still work as before.
View 1 Replies
View Related
Mar 18, 2011
I have 90 + clients running Fedora 12 on a beefy i7 machines used for various reasons.
The configuration is as follows:
HD = 1 Terabye with the following partition setup:
200 Meg for /boot
60 Gig for /
844 Gig for /opt
Users authenticate using NIS and have their home dirs auto mounted as well as others directories.The issue on hand:
1) We want to move up to Fedora 14 (since 12 is no longer supported).
2) The first hurdle is working around the 200 meg boot partition. Does anyone know of a process which can be automated for this? Currently, I was able resize a client by decreasing the root to 59 gigs and boot to 1.2 gigs through the use of gparted.
3) Is there a utility which will allow me to deploy this using a utility/script on all the clients?
4) Ultimately I want to automate the process without having to touch each machine.
View 7 Replies
View Related
Jun 4, 2011
At Present my Desktop has only 0.5 Meg Memory, F14 works well, F15 refused to Upgrade a 750 MB minimum I have gone back to 14.
View 2 Replies
View Related
