Fedora :: Flash After Upgrading To F14?
Nov 3, 2010
Anyone having problems with flash after upgrading to F14? Was working fine on F13, but now on F14 it crashes - can't even load the flash test page. This is on a 64bit laptop upgraded from F13->F14 and running the 32bit adobe flash plugin with nspluginwrapper. When I browse to a page with flash in it I can see flash suck up 100% CPU and then crash. Seeing messages like these in the .xsession-errors:
Code:
*** NSPlugin Wrapper *** WARNING:(../src/npw-wrapper.c:1977):invoke_NPP_GetValue: assertion failed: (rpc_method_invoke_possible(plugin->connection))
*** NSPlugin Wrapper *** ERROR: NPP_Write() wait for reply: Message timeout
*** NSPlugin Wrapper *** WARNING:(../src/npw-wrapper.c:2239):invoke_NPP_DestroyStream: assertion failed: (rpc_method_invoke_possible(plugin->connection))
[Code]...
View 9 Replies
ADVERTISEMENT
May 7, 2010
flash sound problems after upgrading to 10.04 i found i had problems with flash and sound. this was caused by having two versions of flash plugin installed in firefox one of which wasn't appearing in package manager to check how many versions are installed in firefox address bar type about:plugins if there are more than one entry for flash player enter the following into a terminal rm ~/.mozilla/plugins/libflashplayer.so more details and other possible fixes can be found here: [URL]
View 1 Replies
View Related
Mar 17, 2011
I recently upgraded my Dell laptop from Ubuntu 8.04 to 10.04 and everything seems to be working ok, except that when playing Flash videos in Firefox, I don't hear any sound. Sound works for the system, as I can play videos and music via VLC just fine.
View 1 Replies
View Related
May 26, 2011
I had an issue with my mic so I decided to upgrade alsa to 1.0.23 to see if this will fix the problem. I used alsa driver/utils/lib 1.0.23 from alsa-project.org So it fixed it...but now I don't have sound in Flash (youtybe videos, etc.). System sound works perfectly (ev en Skype is working) I'm using Ubuntu 9.10 64bit and Google Chrome browser. flash -> flashplugin-nonfree
View 4 Replies
View Related
May 23, 2011
After the upgrade to Natty from v9.04, though, my flash player won't update past version 10.0.15.3; the latest version is 10.3.181.4. This is rather annoying in its own right, the more so when I watch quite a bit of hulu. I have so far tried uninstalling and reinstalling flash through the software center and by manually installing the .tar.gz file available from this site: [URL]Perhaps most distressing is that the site advertises that you're downloading v10.3.181.4, when I can't get past 10.0.15.3.
Interestingly, when I tried the 'download via APT' option specifically for Ubuntu, there were issues. It would get to the 'open with' box, but when I tried to click on software center, nothing would happen (software center would dehighlight, and no further action would take place) including when I specifically searched and selected software center.As of a few minutes ago, the apt server was having issues (or firefox is) and firefox reports it is unable to find the file.
View 1 Replies
View Related
Dec 13, 2008
I'm trying to load the flash stuff in webpages, but it says i need the flash plugin.
I download the YUM rpm installer, and use yum localinstall to do it.
Terminal say: /home/wade/Download/adobe-release-i386-1.0-1.noarch.rpm: does not update installed package.
I have already tried installing it, and it says it worked fine, but I'm still unable to view flash.
View 8 Replies
View Related
Sep 23, 2010
Did anybody tried installing the latest adobe flash named Square for amd64 systems? I was interested in knowing whether there is any improvement in the performance. I also want to know how to replace my existing 32 bit wrapper based flash on 64 bit browser and install this 64 bit flash.
View 5 Replies
View Related
Oct 1, 2010
I am using F13, and I successfully installed Adobe Flash Player.
So, here comes the problem - I installed Google Chrome browser after that, and whenever I try to view flash content it says "missing plugin".
get.adobe.com/flashplayer/ says:
View 7 Replies
View Related
Sep 29, 2010
i am trying to upgrade to ubuntu 10.04 from 8.04, and am getting this warning:"Upgrading may reduce desktop effects, and performance in games and other graphically intensive programs.This computer is currently using the AMD 'fglrx' graphics driver. No version of this driver is available that works with your hardware in Ubuntu 10.04 LTS.Do you want to continue?"should i continue? i have no idea what a 'fglrx graphics driver' is
View 4 Replies
View Related
Jul 30, 2010
I would like to know if it is possible to upgrade directly from Fedora N to Fedora N+2.
In the Fedora 11 documentation, it was said clearly that it was not possible to upgrade from 9 to 11. The Fedora 12 documentation was buggy, see #547070 In the Fedora 13 documentation, it is only mentioned from Fedora 12 to 13, but it's not clear whether one can upgrades from F11 to F13.
I mean, look at the bugzilla above.
In response to the Fedora 11 documentation which said:
Quote:
It is not possible to upgrade directly from Fedora 9 to Fedora 11. To upgrade Fedora 9 to Fedora 11, upgrade to Fedora 10 first.
Ruediger Landmann said:
Quote:
The Fedora 9 --> Fedora 11 problem was an issue specific to that release; it's no longer relevant.
So, if it's no longer relevant, one would think it is now possible to upgrade from Fedora 11 to Fedora 13.
By the way, how can I re-open a bugzilla?
View 3 Replies
View Related
Mar 24, 2010
I am planning on doing an upgrade on one of our systems from Fedora Core 7 to the Fedora Core 12 distribution. I have read Bruce Byfield's article "Upgrading to the newest Fedora release", and the approach that I am planning on taking is the upgrading via the DVD medium.
View 7 Replies
View Related
Jan 29, 2009
I'm trying to upgrade PHP on my Fedora Core 6 web server. I currently have 5.1.6, all I need is verson 5.2 or higher, it is a requirement of some software I want to install. I am not really a server admin or very Linux savvy, I've been able to get around doing what I need to use this a web development server, but trying to do this is beyond me. I tried updating using yum, but I guess the latest version in the Fedora Core 6 repositories are 5.16. I've never really dealt with installing binaries, so I am stumped as to how to get this done.
View 1 Replies
View Related
Nov 22, 2009
I had downloaded a DVD disk with Fedora 12 on it (~3.7 gig) therabouts. I used it to upgrade my F11 system to F12 or so I think. Well to make a long story short, it had installed approx 1435 files on to my computer. I never so it finish up the process because my moniter timed out and I could get it back on after it had blanked out. So I rebooted the computer (after I had removed the DVD). It showed F12 booting up but the splash screen with logon was F11's. After I logged on my nvidia driver was gone along with compiz and Avant. So I followed 'leigh123linux' response on 'Nvidia' and get it reinstalled and working along with Avant, and compiz and my rotating cube desktop. I did a yum clean to cllean up the packages and ran yum update again to refresh what may have not been installed. It show a couple hundred packages needed to be upgraded and also had alot of 'dependency' errors' for a lot of the packages. That's where I stand now. Is it 11 or still 12? Did the DVD upgrade work? Who nows.
View 2 Replies
View Related
Dec 1, 2009
I had fedora 10 a while back,and when fedora 11 came out a few days later my PC prompted me to upgrade.. all from desktop.. clicked one button and that was it, 10 minutes later it was upgraded... perfect.
This time, I'm sat on fedora 11 looking at the timeline for the 12 release, it gets released and i'm still waiting for 11 to tell me i can upgrade... I know I can upgrade manually, but im quite interested as to why it hasnt asked me automatically this time.
Maybe something in my config is stopping it?
View 8 Replies
View Related
Oct 13, 2010
we want to upgrade the kernel on Fedora 12 .but problem is , while doing 'make install' , it gives error as 'mkinitrd' is not available .which is required during 'make install'how to run 'make install' command on Fedora 12 without 'mkinitrd' utility.
View 9 Replies
View Related
Nov 20, 2010
yesterday I've decided to upgrade my distro from F13 to F14 using preupgrade. There were no errors during installation, but after first boot I've noticed glitches in GTK widgets in GDM and other windows after logon (strange white strips on buttons, progress bars and more). Moreover there were even worse glitches in gnome-do. I've attached two screenshots to show exactly what I [URL] I think this is a problem directly connected with upgrading the distro as there are no mentioned glitches when running standard live version of Fedora 14.
View 2 Replies
View Related
Jan 19, 2011
I am running Fedora 13 and have VirtualBox 3.2 installed. I see in yum list that VirtualBox-4.0.i686 is available but apparently I do not get updated to this version running yum update. How can I update to VirtualBox-4.0.i686 ? I uninstalled 3.2 and simply installed 4.02 and everything worked fine. Previous virtual machines are compatible and still work as before.
View 1 Replies
View Related
Mar 4, 2011
Earlier in the week I ran the upgrade to move from Fedora 12 to Fedora 14 on my home workstation. After a bit of fussing I managed to get things working for the most part. The problem I have left is a show stopper for me though. I can't get k3b to work right since the upgrade. I primarily use it to copy video dvds that I've created. The first disk that I tried to copy was a dual layer disk and although it fussed about not being able to umount the disk it was able to copy it ok. Then I tried to copy a single layer dvd and can't seem to get that to work. Right away I noticed that it was reading the disk very slowly.
About a meg a second which is a LOT slower then it used to. It then didn't eject the source disk when asking for a new disk which was it's previous behavior. When I put the blank disk in the write failed immediately with an error about not having permission to write to the device. After a bit of fussing without luck to get past that I decided to try and write the disk while running k3b as root. That got me past the permissions problem but still the write failed immediately. I do need to iron out the permissions issue that currently is forcing me to do this as root but my immediate need is to be able to burn disks again.
View 3 Replies
View Related
Mar 18, 2011
I have 90 + clients running Fedora 12 on a beefy i7 machines used for various reasons.
The configuration is as follows:
HD = 1 Terabye with the following partition setup:
200 Meg for /boot
60 Gig for /
844 Gig for /opt
Users authenticate using NIS and have their home dirs auto mounted as well as others directories.The issue on hand:
1) We want to move up to Fedora 14 (since 12 is no longer supported).
2) The first hurdle is working around the 200 meg boot partition. Does anyone know of a process which can be automated for this? Currently, I was able resize a client by decreasing the root to 59 gigs and boot to 1.2 gigs through the use of gparted.
3) Is there a utility which will allow me to deploy this using a utility/script on all the clients?
4) Ultimately I want to automate the process without having to touch each machine.
View 7 Replies
View Related
Jun 4, 2011
At Present my Desktop has only 0.5 Meg Memory, F14 works well, F15 refused to Upgrade a 750 MB minimum I have gone back to 14.
View 2 Replies
View Related
Jan 26, 2009
I've never compiled a kernel before and I'm in need of the 2.6.28 kernel (two words: macbook aluminium).
I guess my biggest question is, will this guide work well for F10? I would hate to get half-way through it just to find out that F10 does something different than F08 or F09. Is there anything that you experts can see right away that would possibly be disastrous? If things do come to worse, I can simply select the previous kernel at GRUB boot right?
Or will the Fedora team be releasing the update soon through the package manager? Is there a way I can activate the development version and only get the kernel update?
View 2 Replies
View Related
Feb 10, 2009
configuring my wireless in Fedora core 1 I had old one fedora that i got it from Public Library Can anyone help me? Is there any upgrading on Fedora core10 or 11?
View 14 Replies
View Related
Sep 8, 2009
When I installed F11 I chose to install Bugzilla with it. It is installed and working great, but It is not the newest version, and apparently the repositories I have installed do not have the newest version. Anyone know what repository I could get this from, if its possible?
View 3 Replies
View Related
Mar 25, 2010
I am planning on doing an upgrade on one of our systems from Fedora Core 7 to the Fedora Core 12 distribution. I have read Bruce Byfield's article "Upgrading to the newest Fedora release", and the approach that I am planning on taking is the upgrading via the DVD medium.
Quote: Please don't even bother trying this... each upgrade between fedora versions has it's risks, I'd give you a 4% chance of success between these two versions. And if you upgrade, you'll not end up with FC12, you'll end up with a horribley messy mish mash of a distribution that just happens to mostly contain FC12 rpms. Do yourself a proper favour and save important data and configs, and reinstall. and then keep it up to date properly. Another quote was as follows:
Quote: Glennzo posted a thread in [URL] about upgrading which surfaced in a recent thread. If it's a production system I'd strongly suggest copying the setup to a test slash staging server to see if cleanly installing and modifying F12 versus upgrading to 8, 9, 10, 11, 12 is more efficient slash less error-prone. I am inclined to try doing the upgrade on a test server to see if it works. Should I even bother with that approach or just proceed with the scratch install?
View 7 Replies
View Related
May 13, 2010
I'd like to reproduce the way I got to f12 from f11, but obviously to f13 basically I started out on the f11 rawhide repos, then as f12 got released a yum update updated my fedora-release and then hey presto I was automatically upgraded to f12 final release if I now turn on my rawhide repos, as f13 is nearing completion, will I be updated to the latest f13 release (RC3 I believe) and then as f13 gets released my fedora-release will be updated and i will then be upgraded to f13 final as happened before?I don't want to download a whole dvd iso and then upgrade when f13 is final, I'd like to do a gradual transition ie..
f12 -> f13 RC3 via rawhide
f13 RC3 -> f13 Final via yum update
View 2 Replies
View Related
Jul 26, 2010
Just have upgraded from Fedora 11 to Fedora 13 and now fonts in KDE are too large, so my 1280x1024 desktop resolution seams like much lower. Such apps like Thunderbird, Firefox, Opera and others have their own font settings, but they affect only on text inside browser or e-mail. All menus, toolbars and other elements are big. Other apps which don't have own font settings have all fonts big. I tried to change font sizes in system fonts parameters, set all them to 10, but no any effect. It's especially inconvenient in Thunderbird, because it has big fonts not only in menus, but also in names of all folders and even in messages subjects. Only message text itself is customizable in its settings.
View 8 Replies
View Related
Aug 9, 2010
I've just upgraded from fc9 to fc13 on an Acer Veriton L460. Under fc9, I connected the monitor via the digital interface (allowing the analog monitor input to be connected to a "headless" old fc5 box I can't quite retire yet).
When booting the fc13 distro DVD, the display when black shortly after the boot started. Changing to the analog o/p of the PC restored the display allowing fc13 to be installed (obviously replacing fc9). Sadly, booting the new install is the same: no DVI output; I have to use analog.
[Code]...
View 9 Replies
View Related
Aug 20, 2010
I want to upgrade my 32bit Fedora from 11 to 13 version. I tried both options: via preupgrade tool and via installation media (DVD). Both options failed with following Anaconda error at the beginning of installation process:
RpmUtilsError: RPM Error opening Package
In my case, the problem was in package:
/mnt/sysimage/var/cache/yum/anaconda-InstallationRepo-xxx.i386/packages/fontpackages-filesystem-1.44-1.fc13.noarch.rpm.
I switched to terminal, and discovered that size of this file is 0.
I downloaded installation DVD from official torrent, so checksum was autmatically checked. Verification test at the beginnig of installation was also successfully passed. So media is OK. Moreover, I also tried to upgrade via preupgrade tool with the same results.
I found similar bug with unclear status in Fedora Bug Tracking system for Anaconda in F12: [URL]
View 10 Replies
View Related
Nov 4, 2010
I can't seem to login to X after I've upgraded from F13 to F14 (x86_64 KDE Spin). I retained my /home partition with my user account etc.
The system fails when I try to login to the account I had on F13, but if I create a new user account I can login to X.
I did have the nvidia proprietary graphics drivers installed... how to track down an X issue like this relating to logging in to a system via the GUI?
View 1 Replies
View Related
Dec 27, 2010
I upgraded, using package manager, to the latest kernel (2.6.35.10-72); I upgraded also kmod-nvidia and kmod-wl to the latest version, and the upgrade worked.After restarting the PC, though, it wouldn't boot Fedora: it stops at:"setting hostname for <my laptop's name>:[OK]"then it simply hangs there. It doesn't move, it doesn't boot, it doesn't ask for a login and it doesn't let me use command line.I can, however, boot and run Fedora fine if I select the previous kernel from the GRUB menu.Anybody can give me a hint to find the cause of the problem?
View 2 Replies
View Related
