Fedora :: Installed Packages Not Checked In Yum Extender?
Feb 14, 2010
I have Fedora 11 x86_64. I always apply all updates as soon as the Software Update applet announces them. I recall that there was an update for yumex recently to version 2.9.7. It is very nice because it now remembers the window size. But it used to display installed packages with the check box ticked. That feature seems to have disappeared. This makes it difficult when searching for something. For example, a friend who also has Fedora 11 was having difficulty with bluetooth. Since it is working fine for me I wanted to search on "bluetooth" to get a list of all packages that I have installed so he could be sure he had the same packages installed. I got a list of packages but there was no way to tell which were installed and which were not.
View 10 Replies
ADVERTISEMENT
Dec 1, 2010
I opened a video in ..... by using Mozilla browser. It gave me option to install additional plugin "Adobe flash player" and I accepted it. I checked it in Ubuntu Software Centre and it is installed but now its not working?
View 2 Replies
View Related
Nov 16, 2010
I have a box which is used by other people, although I have the only admin privileges.
In the users part of the system, an installation has appeared.
I didn't install it, and it seems to be some sort of windoze malware.
How do I get rid of this totally?
A simple 1,2,3..
The name of the App is AdvancedCleaner Free. It is running in WINE.
Since I certainly didn't install either of these....
I checked synaptic for wine, but it doesn't show as installed.
View 6 Replies
View Related
Apr 18, 2011
I have installed Fedora 14. Can I install Gnome 3 and can I use Yum extender there for ?
View 9 Replies
View Related
Dec 1, 2009
Fedora 12 installed about a week ago. Using Yum extender to add (K desktop) and remove (unused languages) when at the end it crashed. Now the Internet stopped working. Firefox, Konqueror, and Yum terminal updates have stopped working.
View 2 Replies
View Related
Jun 1, 2011
I think I need some command line help here. I am trying to download the initial updates using Yum Extender GUI in LDXE desktop. It downloads the updates until about 90% then If I get any error it craps out. I have gotten errors relating to no key avaliable, sorry don't remember the precise text, and also that no repo is avalable for a specific pacakge. At this point there are no options given to skip, etc... just "OK" and Yum Extender closes and I have to start over. It seems to start over about were it left of, this leads me to believe the packges are being stored some where on the drive.
Without using the GUI, hey I'm trying to switch from Windoz, Is there a command line that will tell Yum to download all updates and install and skip errors? I imagine there must be if this package installer is working, it must be talking to the system in a similar manor.
View 5 Replies
View Related
Oct 7, 2009
Is there a way to turn a laptop, or any PC with a wifi network card, into a wifi range extender? Suppose I have the usual wifi router, but unfortunately the signal doesn't cover the whole house; a solution is a range extender, but I thought: if I have a laptop, placed in the same room where I would put that range extender, can't I use THAT as a range extender too? After all, range extender at the very heart are "stripped-down" routers, which in turn are stripped down PCs equipped with a stripped-down version of the Linux Kernel...
View 4 Replies
View Related
Feb 22, 2009
i'm having issues with looking for extra softwares to install... YUM can only see already installed softwares, i can't see any extra...
this happened after i modified the yum.repo.d files for installing softwares from DVD... i edited the files back to original.. i've triple checked my repo files and they are correct...
is there anywhere else YUM has files for handling updates and software installations? like yum.repo.d? some config file of some sort?
i can't run update either... well i all can run but reports no updates available
View 14 Replies
View Related
Nov 16, 2009
Running F11 x86_64 on recently rebuilt desktop with new processor/motherboard
I tried to build mplayer from source, and something got messed up. When I realized I had done something wrong, I did a "make remove", and then tried to reinstall mplayer from rpmfusion using yum.
(There is a bug in mencoder that was fixed in the latest source tree - a documented bug that has to do with subtitles. I don't think I can patch a library with a diff line of code, so thought the best answer to get the update would be to install mplayer by source. I love using Fedora, and would like to make that next step in learning linux by building a few custom packages. Apparently, I don't have all the skills yet!)
That being said, my system is still not quite right. I figure the easy answer is to wait until tomorrow, upgrade to F12, and all should be well. But... I will probably compile something else and mess something else up - that's just how I roll...
I can get a list (sort of) of install packages with "yum list installed". Is there a way to strip off all of the extra information, then pipe this to yum reinstall? I may resort to doing this by hand, but there has to be an easier way!
View 5 Replies
View Related
Jun 7, 2010
1 laptop with HDD(1) - old, small,5400. Fedora 12 installed on it backup user settings - on external USB HDD (/home/myusername) for fun - tried to upgrade to 13 using preinstall - failled put new HDD(2) and clean install F13 update the F13 install "remembered" package move back from backup all stuff from external hdd to /home/myusername onto new HDD(2) - everything is back as I know now I need to verify what packages was installed onto the old HDD I have access to it (i have one USB SATA addaptor) for the new install I can issue one
Code:
rpm -qa
my question is what I need to do to make the rpm to check on the old HDD
View 3 Replies
View Related
Dec 23, 2010
I recently upgraded from Fedora 13 to Fedora 14 and noticed something strange when I used Yum to install GNote and Inkscape. Yum installed the Fedora 14 version of the programs, but installed some dependencies that were actually from Fedora 12 and 13. The output below shows what packages were installed.
Yum output:
==================================================================================================== ===================================================================
Package Arch Version Repository Size
[code].....
When I ran the yum command to list all of the packages for the dependencies in question, it only listed the version for Fedora 12 or 13. Is there something wrong with one of my repositories or do these Fedora 14 programs actually use packages from previous versions of Fedora?
View 2 Replies
View Related
Jun 20, 2009
I am installing to an empty hard drive (that for some reason is shown as /dev/sde - I don't know if it is related, but seems weird - why is it not sda, and moreover, not hda - it is an ide drive), and install goes through fine, but in the end it says "no kernel packages were installed, your grub configuration will not be changed", and the only option is to reboot. After rebooting, I get thrown into grub command prompt, and have no idea what to do there.
View 2 Replies
View Related
Feb 19, 2010
how to get yum to list all of the packages currently installed from a specific repository?
View 2 Replies
View Related
Apr 21, 2011
I want to list all installed packages by keyword. For example I want to know what packages were installed related to "game". How can I do that in Fedora?
I tried 'yum list installed', 'you search' ... but still can't find a solution. I'm not a yum expert .
View 2 Replies
View Related
Aug 7, 2009
Is there a way to rollback the packages installed in the last software update?I cannot reach the gui login screen (x-server) ever since my last software update.Hence cannot login.Too bad the old xserver restart key (crtl+alt+bkspace) dont work anymore.Also, I dont remember the command to view the system logs to know what went wrong.
View 8 Replies
View Related
Sep 3, 2011
this error happen while installing wine for fedora 15 x86_64 using yum extender, the same problem also happen when installing it using terminal
10:57:02 : ERROR: Dependency resolving completed with errors
10:57:02 : ERROR: Protected multilib versions: 2:libpng-1.2.46-1.fc15.i686 != 2:libpng-1.2.44-3.fc15.x86_64
View 10 Replies
View Related
Jan 23, 2009
On some computers I can not use graphical installation interface of Fedora 9. So I use text mode.I would like to have a very small installation with very few installed packages, so at package selection I uncheck everything. In text mode installation there is no option to customize installed packages down to package names. I can only check main themes.So I uncheck everything and installation starts. This method results over 400 packages to bo installed... This is too much with many unnecessary packages.If I use graphical interface and uncheck every package name at custom package selection then about 150 packages will be installed.Is there any good way to use textmode installation and don't install more than 400 packages?
View 2 Replies
View Related
Mar 6, 2009
Currently i am using mapserver 5.0.3 , AGG 2.5-6 on fedora 9. I need some help with mapserver and AGG support. I am trying to use AGG/PNG outformat in the mapfile as well as i added precisely. When i call the link through browser i recieved the following error:
loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver AGG/PNG, but this driver isn't configured. It is clearly evident that from the error, the driver is not configured. since all the mapserver version 5 suppotrs AGG rendering backend, so i checked whether mapserver supports AGG or not.
[kapil@localhost cgi-bin]$ mapserv -v
MapServer version 5.0.3 OUTPUT=GIF OUTPUT=PNG OUTPUT=JPEG OUTPUT=WBMP OUTPUT=SVG SUPPORTS=PROJ SUPPORTS=FREETYPE SUPPORTS=WMS_SERVER SUPPORTS=WMS_CLIENT SUPPORTS=WFS_SERVER SUPPORTS=WFS_CLIENT SUPPORTS=WCS_SERVER SUPPORTS=SOS_SERVER SUPPORTS=THREADS SUPPORTS=GEOS INPUT=TIFF INPUT=POSTGIS INPUT=OGR INPUT=GDAL INPUT=MYGIS INPUT=SHAPEFILE
[kapil@localhost cgi-bin]$
I found that my mapserver doesn't support AGG means SUPPORTS = AGG is missing in the above output. But i have already installed AGG in my system. In order to clear this issue i gone through many threads in forums, but i was not satisfied with the answers. Atlast i came to know that, i have to recompile the mapserver with AGG. The following link gives you some idea about compiling mapserver with AGG in linux [URL] But the problem now i am facing is i have installed both the mapserver and AGG through YUM INSTALL command so i dont know how to recompile mapserver with AGG support. I think, there will be no configuration file normally when installing through Yum insatll command.
View 2 Replies
View Related
Nov 25, 2010
Is there an easy way to see what packages use the most disk space? I am running of disk space and need to cleanup.
View 1 Replies
View Related
Apr 20, 2011
Recently I have installed FC 14, I need to know how many packages installed through YUM command prompt in local system.
View 2 Replies
View Related
Apr 4, 2009
On my Linux box, (which is a proxy, webserver, mailserver, etc. etc. etc.) I use static IP's. Network manager is turned off, but when you do that Firefox ALWAYS has WORK OFFLINE checked. I could use Network Manager but that's not really the right way, cause I need the servers to work in level 3, etc. as well...Anyways, anyone know a way to make FF behave if I use Static IP without NM?
View 1 Replies
View Related
Jul 22, 2010
I have just installed Debian Lenny and was trying to upgrade the installed packages from the packages.debian.org site. when i asked synaptic to add the downloaded packages the would not appear, but when i checked the .xsessions file there are entries saying that the packages were being ingnored because they were either different versions, the MD5 did not match or even "can't find pkg". i have to use the local library to download the packages because i dont have an internet connection at home.
[Code]...
View 6 Replies
View Related
Jul 14, 2011
Whenever I boot up Fedora 15 on Virtual Box, I get the message " gnome 3 could not load " and I installed all the packages needed to install Guest Additions, but even when I mounted the file, the ONLY file I could find online that was VMBoxGuestAdditions.iso or something like that, I mounted it, I tried installing, but nope, it gives me an error message that it can't. I have the latest version of VirtualBox and I've been on several forums and looked at many places but I can't fix it. I also have a problem where when I boot it up it says " the system is optimized to support 32 bit but it is currently 64 bit go here and click this to fix it " or something like that. and I can't figure out how to fix it in Virtual Box.
View 1 Replies
View Related
Jan 7, 2011
Someone recommended a Luxul Wireless Extender for my whole house (3 floors). Ive run ddwrt boxes (wrt54gls) as wireless repeaters/bridges, however haven't been overly impressed with their range and speed. I'm just wondering if this costly option is worth it?[URL]..
View 2 Replies
View Related
Jan 7, 2011
I was wondering how can I re-download only all currently installed packages. I would like to save them to removable media, because I use netinst disc to install, and on slow connection it's hell to download 1GB of packages with console-only.
View 3 Replies
View Related
Feb 2, 2010
Is there a way to see the packages that I have recently installed? I'm trying to remove a program and I'm not sure what the names of the packages that came with it are.
View 7 Replies
View Related
Dec 13, 2010
I have been running Ubuntu on my laptop since 9.10 by itself (not dualbooting Windows). I had no problems with it back then but I did notice that when I upgraded, not all the packages installed and I would get an error message saying so. I never thought much of it. The problem became apparent when upgrading from 9.10 to 10.4, I would get an error message everytime and the upgrade would be cancelled. This forced me to reinstall Ubuntu for both 10.04 and 10.10. As soon as I downloaded 10.10 I downloaded docky and chromium. Heres where my current problems arise:
- Docky (which worked in 10.04) wont work even after I download compiz.
- Every time I update the system, if i try to update chromium or anything else from google it cancels the upgrade.
- I tried using "sudo apt-get upgrade" in the terminal but I get
"Reading package lists... Error!
E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/dpkg/status
E: The package lists or status file could not be parsed or opened."
View 3 Replies
View Related
Mar 9, 2010
I just installed CentOS 5.4 Final on a 64 bit system. After install, I found a lot of 32 bit packages are also installed. Is it necessary for a pure 64 bit system to run (let's say, I will never want to run any 32 bit app on this system), or is it something I could have avoided during install?
View 5 Replies
View Related
Mar 1, 2010
Is there any standard procedure to uninstall software packages which have the above extensions?
I know how to uninstall through yum or apt-get.. but how to tackle these files?
Like Nvidia drivers comes in .run adobeAIR comes in .bin netbeans in .sh
And what if i have installed from source i.e tar balls? are there some protocols to follow?
I think it may sound a lame question but i was wondering about this since days coz i want to remove some of the apps from my laptop..
View 2 Replies
View Related
Feb 5, 2011
I am learning image processing and hence using opencv-2.2.0. I am following the link [URL] to install this. But even the first command to install build-essential.
Code:
apt-get install build-essential
is giving following errors...
Code:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may resolve the situation:
The following packages have unmet dependencies:
build-essential: Depends: gcc (>= 4:4.4.3) but 4:4.4.1-1ubuntu2 is to be installed
Depends: g++ (>= 4:4.4.3) but it is not going to be installed
Depends: dpkg-dev (>= 1.13.5) but it is not going to be installed
E: Broken packages
View 3 Replies
View Related
