Fedora Installation :: YUM Can Only See Installed Packages?
Feb 22, 2009
i'm having issues with looking for extra softwares to install... YUM can only see already installed softwares, i can't see any extra...
this happened after i modified the yum.repo.d files for installing softwares from DVD... i edited the files back to original.. i've triple checked my repo files and they are correct...
is there anywhere else YUM has files for handling updates and software installations? like yum.repo.d? some config file of some sort?
i can't run update either... well i all can run but reports no updates available
View 14 Replies
ADVERTISEMENT
Jun 20, 2009
I am installing to an empty hard drive (that for some reason is shown as /dev/sde - I don't know if it is related, but seems weird - why is it not sda, and moreover, not hda - it is an ide drive), and install goes through fine, but in the end it says "no kernel packages were installed, your grub configuration will not be changed", and the only option is to reboot. After rebooting, I get thrown into grub command prompt, and have no idea what to do there.
View 2 Replies
View Related
Jan 23, 2009
On some computers I can not use graphical installation interface of Fedora 9. So I use text mode.I would like to have a very small installation with very few installed packages, so at package selection I uncheck everything. In text mode installation there is no option to customize installed packages down to package names. I can only check main themes.So I uncheck everything and installation starts. This method results over 400 packages to bo installed... This is too much with many unnecessary packages.If I use graphical interface and uncheck every package name at custom package selection then about 150 packages will be installed.Is there any good way to use textmode installation and don't install more than 400 packages?
View 2 Replies
View Related
Mar 6, 2009
Currently i am using mapserver 5.0.3 , AGG 2.5-6 on fedora 9. I need some help with mapserver and AGG support. I am trying to use AGG/PNG outformat in the mapfile as well as i added precisely. When i call the link through browser i recieved the following error:
loadOutputFormat(): General error message. OUTPUTFORMAT clause references driver AGG/PNG, but this driver isn't configured. It is clearly evident that from the error, the driver is not configured. since all the mapserver version 5 suppotrs AGG rendering backend, so i checked whether mapserver supports AGG or not.
[kapil@localhost cgi-bin]$ mapserv -v
MapServer version 5.0.3 OUTPUT=GIF OUTPUT=PNG OUTPUT=JPEG OUTPUT=WBMP OUTPUT=SVG SUPPORTS=PROJ SUPPORTS=FREETYPE SUPPORTS=WMS_SERVER SUPPORTS=WMS_CLIENT SUPPORTS=WFS_SERVER SUPPORTS=WFS_CLIENT SUPPORTS=WCS_SERVER SUPPORTS=SOS_SERVER SUPPORTS=THREADS SUPPORTS=GEOS INPUT=TIFF INPUT=POSTGIS INPUT=OGR INPUT=GDAL INPUT=MYGIS INPUT=SHAPEFILE
[kapil@localhost cgi-bin]$
I found that my mapserver doesn't support AGG means SUPPORTS = AGG is missing in the above output. But i have already installed AGG in my system. In order to clear this issue i gone through many threads in forums, but i was not satisfied with the answers. Atlast i came to know that, i have to recompile the mapserver with AGG. The following link gives you some idea about compiling mapserver with AGG in linux [URL] But the problem now i am facing is i have installed both the mapserver and AGG through YUM INSTALL command so i dont know how to recompile mapserver with AGG support. I think, there will be no configuration file normally when installing through Yum insatll command.
View 2 Replies
View Related
Mar 3, 2010
How can I list what i have installed for current packages, excluding what normally comes with a fresh install of 9.10?
View 8 Replies
View Related
Apr 2, 2010
I searched. I poured over the man pages. No joy. How can one, with a command-line utility, determine: What, if any, upgrades are available for a specific package? What, if any, upgrades are available for all installed packages?
View 3 Replies
View Related
May 27, 2010
I was wondering if there's a package that can report on the frequency with which a program (e.g. gnuplot) has been run over, say, the past week, or month.
View 2 Replies
View Related
Jun 10, 2011
I'm working on a script that keeps track of user explicitly installed packages (no deps, no default packages), where can I found a list of ubuntu natty preinstalled packages ? Is there some file in the filesystem or in installation disc ?
View 3 Replies
View Related
Nov 16, 2009
Running F11 x86_64 on recently rebuilt desktop with new processor/motherboard
I tried to build mplayer from source, and something got messed up. When I realized I had done something wrong, I did a "make remove", and then tried to reinstall mplayer from rpmfusion using yum.
(There is a bug in mencoder that was fixed in the latest source tree - a documented bug that has to do with subtitles. I don't think I can patch a library with a diff line of code, so thought the best answer to get the update would be to install mplayer by source. I love using Fedora, and would like to make that next step in learning linux by building a few custom packages. Apparently, I don't have all the skills yet!)
That being said, my system is still not quite right. I figure the easy answer is to wait until tomorrow, upgrade to F12, and all should be well. But... I will probably compile something else and mess something else up - that's just how I roll...
I can get a list (sort of) of install packages with "yum list installed". Is there a way to strip off all of the extra information, then pipe this to yum reinstall? I may resort to doing this by hand, but there has to be an easier way!
View 5 Replies
View Related
Jun 7, 2010
1 laptop with HDD(1) - old, small,5400. Fedora 12 installed on it backup user settings - on external USB HDD (/home/myusername) for fun - tried to upgrade to 13 using preinstall - failled put new HDD(2) and clean install F13 update the F13 install "remembered" package move back from backup all stuff from external hdd to /home/myusername onto new HDD(2) - everything is back as I know now I need to verify what packages was installed onto the old HDD I have access to it (i have one USB SATA addaptor) for the new install I can issue one
Code:
rpm -qa
my question is what I need to do to make the rpm to check on the old HDD
View 3 Replies
View Related
Feb 3, 2010
I am beginner in ubuntu. I wish to run the programs that will display a picture which use the ffmpeg, sdl and lame. When I type gcc -o exercise exercise1.c 'sdl-config --cflags --libs' to compile the program it give this such of error :gcc: sdl-config --cflags --libs: No such file or directory. I have installed the gcc packages, SDL, FFMPEG, LAME but still cannot display the output. What should I do with the gcc packages?
View 1 Replies
View Related
Feb 15, 2010
Can you tell me where do packages installed with apt-get or synaptic package manager get stored in? I use Ubuntu9.10
View 3 Replies
View Related
Feb 19, 2010
I wounder how I should do to find out what packages I have explicitly installed on the system, NOT including the dependencies. The purpose is to get a figure of what packages I need to install when I reinstall my system.In Gentoo one can look at the world-file (/var/lib/portage/world) which is a list of my explicitly installed packages, not including system packages (located in /var/lib/portage/system)
View 1 Replies
View Related
Apr 2, 2010
I was curious if there is any way to clone my system by simply writing into a file which packages are installed AND deinstalled on the source system.
The reason is that I configured a system which fits me just right (I installed some additional packages and removed some standard packages like OpenOffice...) and was wanting to back it up - even for a newer Ubuntu-Version.
Most of the changes are already gone in /var/log/dpkg.log... so this option does not exist...Does anyone know where Synaptic stores the information which package is installed and which is not? It is possible to view those packages by applying a filter.
View 3 Replies
View Related
Apr 8, 2010
I'm reinstalling an ubuntu machine that does not boot anymore. I have a complete backup of all the files that were on the harddrive.
I would like to make a list of all the programs that were installed, so I can re-install them on the fresh install.
I've found the following procedure, but this method requires that the machine still boots. (and my machine does not boot anymore) code...
Is it possible to get a list of installed packages from the backup of an ubuntu machine?
PS, My appologies for my English, I'm dutch
View 1 Replies
View Related
May 25, 2010
Since I had problems with Openoffice since the upgrade to 9.10, I've tried to uninstall all openoffice. I've searched for 'openoffice' in synaptic and uninstalled all thet I've found. It has uninstalled many other things, thunderbird, firefox and god only knows what other. Now, there is a way to know what are the packages installed by default? Or, to install all the dafault packages? Or, there is a log of what I've uninstalled?
View 1 Replies
View Related
Nov 13, 2010
After upgrading from one version of Ubuntu to another, what happens to packages that have been installed prior to the upgrade that have higher version numbers (are newer) than the ones that are supposed to be installed via the Ubuntu upgrade?Specifically, I'm referring to compiling the latest version of FreeType to try to alleviate some dependency issues related to compiling Wine (I need a custom Wine patch), and I was wondering what would happen if I had a newer version of FreeType installed if I then later upgraded from Lucid to Maverick, and if Maverick used an older version of FreeType by default than the one already installed on my system.
View 5 Replies
View Related
May 8, 2011
I did a clean install of 11.04 this morning. Upon logging in, Update Manager appeared, telling me there were 67 packages to upgrade. I obliged, and the update progress window appeared, as usual. At this point I realized it was not a convenient time to install the updates. No progress had yet been made; Update Manager had not downloaded anything, the progress bar had not moved, and the status was "waiting". I canceled the update and closed Update manager. However, upon running it again, it thinks that it successfully installed all the packages. In the "Ubuntu Software Center" Update history, it shows all those packages as having been updated with a timestamp of when I canceled the update. Apt-get and aptitude will not update the packages either. It seems like the packages have been marked as updated even though no update was installed. How can I rectify this problem and get the package managers to actually install the updates?
View 7 Replies
View Related
Sep 1, 2011
I am trying to install the Ubuntu 11.04 in my IBM t42 laptop after the HD crashed. I am trying to install it into a USB drive from another USB drive. Everything went on smoothly until it got stuck at a point where it shows the following message: Restoring previously installed packages... And the progress bar is not moving a bit for almost one and half hour.
View 1 Replies
View Related
Dec 23, 2010
I recently upgraded from Fedora 13 to Fedora 14 and noticed something strange when I used Yum to install GNote and Inkscape. Yum installed the Fedora 14 version of the programs, but installed some dependencies that were actually from Fedora 12 and 13. The output below shows what packages were installed.
Yum output:
==================================================================================================== ===================================================================
Package Arch Version Repository Size
[code].....
When I ran the yum command to list all of the packages for the dependencies in question, it only listed the version for Fedora 12 or 13. Is there something wrong with one of my repositories or do these Fedora 14 programs actually use packages from previous versions of Fedora?
View 2 Replies
View Related
Feb 14, 2010
I have Fedora 11 x86_64. I always apply all updates as soon as the Software Update applet announces them. I recall that there was an update for yumex recently to version 2.9.7. It is very nice because it now remembers the window size. But it used to display installed packages with the check box ticked. That feature seems to have disappeared. This makes it difficult when searching for something. For example, a friend who also has Fedora 11 was having difficulty with bluetooth. Since it is working fine for me I wanted to search on "bluetooth" to get a list of all packages that I have installed so he could be sure he had the same packages installed. I got a list of packages but there was no way to tell which were installed and which were not.
View 10 Replies
View Related
Feb 19, 2010
how to get yum to list all of the packages currently installed from a specific repository?
View 2 Replies
View Related
Apr 21, 2011
I want to list all installed packages by keyword. For example I want to know what packages were installed related to "game". How can I do that in Fedora?
I tried 'yum list installed', 'you search' ... but still can't find a solution. I'm not a yum expert .
View 2 Replies
View Related
Jan 5, 2010
After updating to Karmic, Synaptic shows almost all of my installed packages in the category "Installed (manual)", including about half of the packages that belong to a clean Ubuntu installation (e.g. apparmor, apt and hundreds of others). As a result, I can't easily get a list of those packages that I did indeed install manually and may want to remove. Is there a way of removing the "Installed (manual)" flag from all packages?
If I could do this, all packages that do not belong to the core Ubuntu system should show up as "Installed (auto removable)" and I could individually mark only those as manually installed that I really still need and let apt/synaptic uninstall everything else. I know that with today's hard disks, disk usage of installed packages is not an issue. But those packages accumulate over time and need to be updated with every security update and every ubuntu dist-upgrade, wasting time and bandwidth.
View 2 Replies
View Related
Apr 13, 2010
I want to clean my ubuntu installation and I want to find packages which I installed using .deb files or using another (not ubuntu) repositories. I'm sure it can be done using apt or dselect or dpkg, but how?)
View 2 Replies
View Related
Sep 8, 2010
I would like to know if it is possible to disable apt-get's on a few packages I have compiled from sources : I have removed some ext from PHP and I don't want it to upgrade itself to a new version when there is one.
View 3 Replies
View Related
Nov 25, 2010
I am using the (K, X)Ubuntu 10.04 alternate installation CD in expertmode. Although package selection is offered, I am not able to choose which packages get installed during the installation process. Best regards, owiknowi
View 3 Replies
View Related
Dec 19, 2010
I had some major bugs with KDE 4.3 and 4.4 and the only way that I could fix them was to install the entire KDE 4.5. This was mid-Summer. Now I would like to upgrade to Maverick the proper way and have 4.5 in a stock repo.
I managed to get most of kde back to stock by luck and uninstall/reinstalling kdebase stuff and kubuntu-desktop a couple of times. A pain in the neck trying to find important packages that are already installed from a previous PPA.
BTW my sources.list is stock right now.
Does anyone know of a way to search for installed PPA packages that are not in the stock repository?
View 2 Replies
View Related
Aug 7, 2009
Is there a way to rollback the packages installed in the last software update?I cannot reach the gui login screen (x-server) ever since my last software update.Hence cannot login.Too bad the old xserver restart key (crtl+alt+bkspace) dont work anymore.Also, I dont remember the command to view the system logs to know what went wrong.
View 8 Replies
View Related
Feb 25, 2010
I want to transfer the software and packages that's already installed. I have an ISO disc creator to take the current information on my hard disk and format it for an ISO, which I can burn onto a DVD, but what I'm wondering is, how would I go about reinstalling the OS
here's the backstory, I'm wanting to transfer the hard drive from this computer to the one I'm going to custom build once it's finished, and I'm pretty sure I would have to reinstall due to the fact that I would have to reconfigure and install new hardware drivers. If I'm wrong, please tell me so I don't waste the time and go through the trouble of this
my plan is to create an ISO of my hard disk, then backup all of my personal files, then remove them so the ISO will have more room (and I may get rid of some unnecessary packages), then get rid of everything on the hard drive (just use a livedisc of something and use a partition manager to delete all partitions on the hard drive) then move the hard drive over to the new computer, and reinstall with the ISO disc I created
the things that will be staying the same is the graphics card, some peripherals (like monitors, keyboard, wacom tablet, printer, etc...) but the motherboard has a different sound card and a different processor (I'll probably just install a different kernel to accommodate for that) and some different things that are smaller (don't forget the power supply)
offer a better method of transferring the hard drive (and don't say "just simply take the hard drive out and put it in the other computer" unless you have indisputable proof that it will work. I know it most likely won't work for multiple reasons, the drivers being one of them, the fact that windows can't do that (I have a different plan for windows that involves upgrading from vista 32bit to windows 7 64 bit))
View 9 Replies
View Related
