Fedora Installation :: "/" Partition Losing Space?
May 30, 2010
Today I installed fedora 13, with 1 gB root partition (ext 4 i believe), a 500 mB boot partition (i forget which i used here) and a 1 gB swap. For some reason unbeknown to myself, my root partition claimed to only have (blank) amount of space. I thought this was normal, but as I continued to install programs, it would show a smaller amount in the aforementioned blank space. I eventually had to reinstall just because it couldn't run the avahi-daemon, and therefore wouldn't run gnome.... leaving me with a black screen after login. I had to back up my files via CLI and then be pissed off all day.
View 11 Replies
ADVERTISEMENT
Feb 7, 2011
I tried to install rawhide by enabling the rawhide repo and doing a yum update. Lets just say it didn't go so well. My system wont start the GUI when I start the computer. It just shows the Fedora boot animation and stays there. So anyway I need to reinstall Fedora 14. I wanted to reinstall Fedora without having to backup and restore all my data (my home directory). So I did some Googleing and found that if I had my home directory on a separate partition that I was set to go. All I had to do was format "/" and just tell it to use the "/home" partition I already had and not to format it and I that was it. So I went to try it myself and found that it was not as straight forward as it seemed. Well at least for me.
I clicked on "lv_root" assuming that was supposed to have "/" as its mount point. I clicked the edit button. I selected "/" as its mount point and told it to format it as ext4. Then I clicked on lv_home and clicked on the edit button. I made its mount point "/home" and clicked "ok". I clicked "Next" and I get this error "Bootable partitions cannot be on a logical volume". What do I need to do to fix this? I assume this has to do with the "lv_" at the beginning of the partition names.
View 5 Replies
View Related
Jan 20, 2011
I have F14 live on a USB stick and the PC boots fine from this.Now I want to install to the HDD but I need to get a handle on the existing partitions.I don't need too much space for linux, can I delete the 3rd and 4th partitions (D drive and EFI partition) and add my linux partition in this space?Investigation so far suggests that the EFI partition is not used and the D drive is empty.
View 3 Replies
View Related
Aug 24, 2011
I just installed Fedora on my pc with windows XP pre-installed (dual boot). I had the same setup with ubuntu before with no problems. My ntfs windows partition is of 15 gb approximately and the remaining space that was available for fedora was about 220 GB (non partitioned - I removed all the partitions excepting the windows one using gparted from liveCD prior to beginning installation) ..........after installation etc etc.....my home folder shows me only 150GB of space.....what's happening? Where has all the remaining space gone to?
View 8 Replies
View Related
Feb 11, 2011
I tried to install rawhide by enabling the rawhide repo and doing a yum update. Lets just say it didn't go so well. My system wont start the GUI when I start the computer. It just shows the Fedora boot animation and stays there. So anyway I need to reinstall Fedora 14. I wanted to reinstall Fedora without having to backup and restore all my data (my home directory). So I did some Googleing and found that if I had my home directory on a separate partition that I was set to go. All I had to do was format "/" and just tell it to use the "/home" partition I already had and not to format it and I that was it. So I went to try it myself and found that it was not as straight forward as it seemed. Well at least for me.
I clicked on "lv_root" assuming that was supposed to have "/" as its mount point. I clicked the edit button. I selected "/" as its mount point and told it to format it as ext4.Then I clicked on lv_home and clicked on the edit button. I made its mount point "/home" and clicked "ok".I clicked "Next" and I get this error "Bootable partitions cannot be on a logical volume". What do I need to do to fix this? I assume this has to do with the "lv_" at the beginning of the partition names.
View 2 Replies
View Related
Sep 19, 2009
I was impressed to be asked on Fedora 10 if I want to upgrade to Fedora 11 but the first time I tried I had this error:
Not enough space in /boot/upgrade to download install.img.
My boot partition is 99MB and AFAIK that is not unusual so I tried tidying up a bit, uninstalling all except 2 kernels, and now have about 80MB for whatever needs to be downloaded in /boot/upgrade. But I get the same error. I can fix this by using wired instead of wireless networking but I want to know for planning purposes (next time I create a boot partition) how much space is required?
$ ls -l /boot/upgrade
total 21594
-rw-r--r-- 1 root root 18985802 2009-06-03 00:02 initrd.img
-rw-r--r-- 1 root root 3035056 2009-06-03 00:02 vmlinuz
Should I delete these? It looks like they might be left over from last time but I assume preupgrade knows what is junk and what isn't.
View 6 Replies
View Related
Nov 5, 2009
I now have Windows XP installed, with 30GB of free space on the end of my hard rive. If I install linux there, will it cause Windows XP to fail? Last time I tried this, it says hal.dll was not found. However, that may have been caused by having five partitions. Do u think its safe now that I'll only have 4? Will Windows XP fail if I put in a partition in the free space?
Why does it says I'm using Safari in Windows, I'm using Google Chrome
View 3 Replies
View Related
May 17, 2010
I just downloaded the new fedora and proceed to install it into a free space of 11GB on my HDD. As such the partitioner is unable to create more than 1 partitioneven if free space is available, it reports not enough free space seen if its present. As such it can create only one of the three partitions i.e., swap or / or /home duw to which cannot proceed ahead.' Some more details me running Xp as the other OS on my system.
View 10 Replies
View Related
Oct 4, 2010
I have a 80GB HDD on which I have installed Ubuntu10.04. I have about 45GB space remaining. I am trying to install Fedora13. I create : 2GB / partition - 2.4GB swap partition. I want to create 6GB /usr partition and it says not enough disk space? Why is it giving that message?
View 1 Replies
View Related
Feb 11, 2011
I tried to install rawhide by enabling the rawhide repo and doing a yum update. Lets just say it didn't go so well. My system wont start the GUI when I start the computer. It just shows the Fedora boot animation and stays there. So anyway I need to reinstall Fedora 14. I wanted to reinstall Fedora without having to backup and restore all my data (my home directory). So I did some Googleing and found that if I had my home directory on a separate partition that I was set to go. All I had to do was format "/" and just tell it to use the "/home" partition I already had and not to format it and I that was it. So I went to try it myself and found that it was not as straight forward as it seemed. Well at least for me.
I clicked on "lv_root" assuming that was supposed to have "/" as its mount point. I clicked the edit button. I selected "/" as its mount point and told it to format it as ext4.Then I clicked on lv_home and clicked on the edit button. I made its mount point "/home" and clicked "ok".I clicked "Next" and I get this error "Bootable partitions cannot be on a logical volume". What do I need to do to fix this? I assume this has to do with the "lv_" at the beginning of the partition names.
View 6 Replies
View Related
Aug 16, 2009
I have just over 20GB of empty space on C:. When I click it under disk-management, the window comes up and says I can only resize it 192 MB less than what it is. But I have 20GB free. Any ideas on what is wrong? I also have this odd 9.56GB partition that is empty. DM says it's "EISA configuration"...whatever that is. I am planning to allocate about 10GB for F11 if this pans out ok.
View 6 Replies
View Related
Nov 22, 2010
Im trying to shrink a 80 Gb ntfs partition. but when i clicked the shrink option the partition is like this:
"sda1(ntfs,0 mb)".
how to free up space in creating custom layout.
View 1 Replies
View Related
Apr 20, 2011
using onboard windows disk management i have made 75gb unallocated to add to the aforementioned ntfs data partition. but, after resizing extended partition, will i need to fix grub even though i will be adding the unallocated space to a storage partition and not the ubuntu boot partition?
View 4 Replies
View Related
Jan 18, 2011
I have Ubuntu and mint persistent on a usb for my laptop. I have noticed that all of my free space is gone just from browsing the internet using applications and I can't get it back. I have tried bleachbit but it has only retrieved 150 mb back. Where do a the files go? How do I delete it?
View 9 Replies
View Related
Jul 18, 2011
I originally had an Ubuntu partition on my hard drive which occupied about half of it. I installed Windows 7 in the remaining unallocated space and I was planning on doing a grub update from a live cd afterwards. BUT when I looked at my partition table, the space where the ubuntu partition used to be is now unallocated space!
View 5 Replies
View Related
Dec 4, 2008
I have been installing Fedora 8 Linux with already having Windows Xp as my primary OS....
I have a total of 80GB Hard disk.Out of 80 GB,I have freed 8GB for Linux.But during Installation after "selecting language for keyboard" and then choosing "Create Custom Layout", while giving partitions I have alotted 4GB for '/' and 2GB for Swap.
Initially space was created for root(/)...but it is unable to create space for swap and all other boot,home etc...
It is showing the error msg as "Could not create partition as there is no space left for /(root)"...
View 4 Replies
View Related
Jun 7, 2010
I was trying to install Fedora 13, on to my laptop. I have 30 GB of unallocated space in extended partition. When trying to install Fedora 13, I got stuck, as the installer says that there is no free space for installation.can convert the unallocated space into free space.
View 1 Replies
View Related
Jun 19, 2011
I have 237170 MB of space. How should I partition this in order to run Ubuntu? The only space currently taken is a windows restore environment should I ever decide to switch back.
View 2 Replies
View Related
May 27, 2011
I'm wondering how much space should I partition part of my HDD for Ubuntu? I never used Linux in my life before and need an answer. got a 64-bit Ubuntu ready on CDRW to install. I got a 200gigs of my old IDE Seagate HDD, Partition 1: 30gigs for Windows 7 and already like 25 filled up, Partition 2: rest is for backup. So, I was thinking of backup up all the files on Partition 2 to another HDD, and then delete it>create Partition 2 for Linux and Partition 3 for the rest, but how much space for 2?
My system:
AMD Athlon II X2 255 Regor 3.1GHz Socket AM3 65W
Foxconn A76ML-K
ECS NR9800GTE-512QX-F GeForce 9800 GT 512MB 256-bit DDR3
A-DATA 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
CORSAIR CMPSU-400CX 400W
200G Seagate (Master)
500GB Wester Digitital SATA
View 9 Replies
View Related
Aug 9, 2011
I am using a Dell Inspiron 580 that I recently recieved as a gift. I wouldn't normally purchase a Dell, but I have no money and it my old computer was WAY past it's prime. After going through a miniature nightmare I now wonder how to create swap space for my ubuntu installation. I am running 10.04, 64 bit. I am having no problems, but I have no swap space. My computer is a new -Intel i3- with 6GB of ram; so I assumed I could worry about getting it installed, then set a swap file later. As I said, it runs well, but i don't feel comfortable with ZERO swap space.
When I installed Ubuntu I already had a problem because Dell had included 2 special partitions that are diagnostic and recovery. This didn't surprise me, but I want to make my system backup less than 100GB, so I shrank the "c:" partition to 100Gb and made the free space "storage":NTFS partition. After backing everything up (before messing with the partitions), I installed Ubuntu. Since I had created the backup that Dell asked me to (the very first time I turned the PC on) as well as my own system image I wasn't concerned.
Using GParted Boot disk I deleted the Dell "Recovery" partition and marked the "C:" drive (COS)) as active. I used a Windows 7 install disk to "repair" the bootmgr problem. Had to run "repair" twice, but it worked.
My question now is: why didn't Ubuntu installation say anything about a swap partition until I had already set up my partitions? I could easily give up a gig or two for swap space but I cannot make a swap partition unless I delete the Dell diagnostic partition (NOT the "recovery" partition; the other hidden one). I don't mind deleting the "recovery" partition because it is backed up, but I would prefer not to delete the "diagnostic/utility" partition, just in case. The 40MB is crap anyway.
It hadn't occurred to me that I would have trouble making swap space. I am used to windows (I am dual booting with GRUB BTW, if that matters) and the swap FILE doesn't need it's own partition. I understand why a separate partition would be better, but unless I can somehow create a logical/extended partition for swap, I need to know what else I can do.
I believe Ubuntu is a better system for many reasons, but little things like this do puzzle me. I am no engineer, or software designer, but I don't understand why I wasn't given an option, such as: You cannot make another primary partition; would you like to use a virtual disk/file as your swap space?"
View 2 Replies
View Related
Mar 20, 2010
my home partition is an extended one, and when i want to create an unallocated space the space will stay in that extended partition. but there is also an 7 gb unallocated space which i want to merge with the other unallocated space. I also cannot extend that partition over that 7 gb. how can i overcome that problem?
i m also uploading a screenshot of gparted.[URL]..
View 4 Replies
View Related
Jan 31, 2010
Today I was installing a lot of software since I'm just setting up my Slackware system again after a fresh install, and I realized that my root partition has very little space left.
Here is the output of df -h:
Code:
As you can see, I have a 20G (19G here for some reason) root partition, 8G /var, and 86G of /home. I thought this would be plenty since many recent recommendations for / are 10-15G. Now, though, 17G are used up for some reason! How is this possible? I thought a full slackware install only had about 4G of software! I don't have any music or movies or any crazy huge files that I know of, and those would be in my /home directory anyway. Is there any way I can see which files are taking up all this space?
If it's necessary to allocate more space to my / partition, is it still possible to boot up a GParted live Cd, shrink /home a bit, move some partitions to the right, and expand my root partition? I would REALLY prefer I don't have to reinstall since I just spent a ton of time setting up my system again, but if worst comes to worst ... :'-(
In case you're curious, here's my /etc/fstab:
Code:
View 14 Replies
View Related
Jun 10, 2009
I have a doubt with how to add un-used space in my RHEL 4.0(linux) server to a existing partition. I will explain the scenario:-I have some 220 GB space on my linux server as shown by the command as below-
[root@JispNewDB ~]# fdisk -l
Disk /dev/cciss/c0d0: 733.9 GB, 733909245952 bytes
255 heads, 63 sectors/track, 89226 cylinders
[code]...
View 6 Replies
View Related
Jul 25, 2011
This is my first post on Ubuntu, ive been testing/and dual booted then reverted back to windows this past year, and now have gone back to school for computer networking...so im SUPER interested,So - i want to install Ubuntu on my little Toshiba netbook that i drag everywhere with me, but im afraid to screw with it's partitions. I dont want to spend $$$ to get a larger than 8GB flash drive to create a recovery from the HDD partition that is installed on their, and they dont come with the backup/recovery disks, so i want to either leave that partition alone (in case i need to switch it back to windows down the road to sell it), or whatever.
I know i could just download windows to my PC, transfer the files to a flash drive, and put it on that way, but the recovery comes complete with drivers, etc which makes it a smoother and faster process. Oh, i cant make the recovery of windows b/c i need 7.xx GB of space, and my biggest flash drive is an 8GB which doesnt quite make it.SOOOOO - IF i install Ubuntu, will that recovery partition DEFINITELY be left alone? Or is there an easy way someone could suggest copying that partition without a 16GB drive? OR is there any way to use an external hard drive to copy that recovery partition on to?
I have only installed ubuntu once, maybe twice, but didnt care about partitions and wiped everything as requested by the install. (i reverted back because i couldnt navigate quickly installing and updating programs, but now have a windows laptop and want to be forced to learn linux on my netbook).any help is MUCH appreciated! I have an Ubuntu scratch that im dying to itch, but dont want to lose my windows recovery
View 3 Replies
View Related
Jan 19, 2010
Im running a dell studio xps 16 computer with windows 7. Im now trying to install a dual boot with ubuntu. My problem is that ubuntu refuses to create a new partition, claiming that i already have 4 main partitions. According to any partitionprogram run in windows I only got 3. It looks likt this in Gparted (from live cd):
dev/sda1 | fat16 | system reserved | size: 40 MiB
dev/sda2 | ntfs | size: 797.5 KiB
dev/sda3 | ntsf | size: 100 MiB
dev/sda4 | ntsf | 87.56 GiB
The 40 mb partition is probably for some dell recovery stuff. The 100 mb partition is some windows 7 backup, it is also flagged as "boot".. The 87 gb partition is my main windows 7 disk. I have no clue what the 797.5 KiB is for. It dosnt show up anywhere when looking at partitions in windows. I also tried deleting it from ubuntu (live cd) and then booting windows again, and when I booted ubuntu again it was there even tho i deleted it last time. What the hell is this? Can I just delete it and move on with installing ubuntu? Or should I instead delete the fat16 system reserved partition?
View 9 Replies
View Related
Jun 20, 2010
I had to reinstall my Ubuntu 10.04 system after some trouble trying to remove a FAT32 partition. I reinstalled using the Live Ubuntu CD (not Ubuntu Studio CD) and seems to work fine. I want to know if its normal to have an unallocated space before the boot partition? I installed GRUB2 in the sdb1, not in main sdb. Ubuntu boots fine, but I was wondering if the unallocated space affects it being detected properly by other systems? When I boot OS X I get an error that the HD is not formatted. Previously I was not getting the error. OS X & Ubuntu are each on a separate SATA HD and Windows XP is on a third IDE HD.
View 7 Replies
View Related
Jul 27, 2010
I have on sda1 Windows 7 installed. On sda2 I have 3 sub partitions (extended partition) with Ubuntu 10.04 and a swap space and one partition for /usr/local. Now I tried to move space from sda2 to sda1 using gparted. It's not possible. I deallocated space from sda2 which works. But I cannot merge it with sda2. Is that, because sda2 is an extended partition? Is there a work around without killing all partitions and lose my complete data?
View 4 Replies
View Related
Jan 24, 2011
I have a notebook with dual boot windows and Ubuntu 10.10 on a 80 Gig hard drive. The windows XP partition was initially installed and took up the whole drive (dev/sda1). I then freed up some space and created and installed Ubuntu (/dev/sda6) and swap (/dev/sda5) on an extended partition (/dev/sda2). Initially I only freed up 3.6 Gig which I thought would be more than enough but not any more. I cannot even install the updates as there is only 100 Meg left which is not enough. I then freed up more space (8 gig) from the windows partition to allocate to Ubuntu.
My problem is that I can't seem to find to now allocate this "freed-up" space to Ubuntu? I realise that I have to boot-up from a the Ubuntu live disk so that the hard drive is not mounted to allow changes but I'm still unable to change the partitions. I'm using GParted.
The drive looks like this currently:
[...NTFS] [...Unallocated] [...Extended{(ext4),(linux-swap)}]
View 2 Replies
View Related
Nov 24, 2010
I 've some problems with my current version 11 that probably has been fixed in the last version (14). I've updated other non-critical systems through the yum services but from 13 to 14. I've a productive workstation working on ver.11. Is there any possibility to update through yum or other methods through without risks of losses data information?... It's really complicated to backing up Mysql databases, web services and other hundreds things installed. I know, it's convenient carry out a backup but is it a higher risk to dump from 11 to 14 trying to keeping the information inside?
View 4 Replies
View Related
Jan 10, 2010
I just installed Fedora 12 in a laptop with a big hard drive and used LVM for it. The thing is that I used just a fraction of the LVM total size to create the "/" partition and decided to leave the task of creating the other partition (the data partition) with the rest of the LVM space after F12 got installed. Unfortunately I found that Gparted is apparently unable to perform that task of creating a new partition in unallocated LVM space. Is there any way I can create a new partititon in that unused LVM space?
View 4 Replies
View Related
