Fedora :: Installation Of ATI Driver Messed Up X Display?
Oct 1, 2009
I'm running F11 with an ATI HD3850 graphics card. I donloaded latest version of the ATI driver and installed it (without paying to much attention to versions and pre-reqs). This caused my display to be unusable in Gnome, nothing can be made out of it.
Was hoping to be able to repair this if I atleast had a bash prompt, but when I press ctrl-alt-F6 (or any F-button) my computer restarts. how I could fix this without reinstalling?
View 3 Replies
ADVERTISEMENT
Jan 16, 2011
I have a bit of a problem w/ the windowing UI when I drag any window left, the display gets messed up (see attached screen shot). It doesn't matter what the program is, even happens in explorer. I've done some searching of the Internetz and this form and all I could find was this bug, that doesn't have any updates on it:
Does anyone know of a fix for this? I can make the lines go away by triggoring a repaint (by either dragging another window on top of this one or minimizing and maximizing the problem window, but it's still a bit annoying.I'm running Fedora 14 and have ran all of the updates it prompted me to run.
View 1 Replies
View Related
Feb 12, 2009
I'm new to Fedora and just installed F10 yesterday. Everything was perfect, no snags at all, until I used the software tool to install the ATI drivers. Now my computer boots but instead of going back to the GUI all I get is a gray screen. I've tried everything I know to get to the command line so I can go back to my old X11 settings but there's no response -just the gray screen.
I'd prefer not to have to reinstall if I could avoid it. Is there a know bug with either a Toshiba Satellite A210 series laptop or the ATI Radeon Mobility X1300 graphics card? Since I'm not able to get to the command line, I don't know of a way to diagnose what's failing.
View 3 Replies
View Related
Nov 26, 2010
i recently installed the game warsow from the repository but the game used to close midway while loading and my dislay would get messed up(i have attached before and after screenshots). I would usually logout and login again, and the display would go back to normal.
But last time, when the display got messed up again, i ran `metacity --replace` in the terminal and now i am permenantly stuck with the messed up window. the desktop in other user accounts are working fine. can anyone tell me how to set the desktop back to how it was??
View 2 Replies
View Related
Oct 4, 2010
I recently tried to plug my laptop to a TV and adjusted the settings consequently. The thing is now that I want to use it with the laptop screen. I can barely see the first top inch... I'm pretty shure it has something to do with the display configuration since it works flawlessly when I log in as a guestIs there a way for me to reset the screen to it default config without using my regular session?
View 3 Replies
View Related
Nov 18, 2009
Fedora 12 seems to have made all my ntfs disks and partitions into LVM Linux (whatever that is) In all the time i've used other distros I've never seen this before .... I m getting them back to original state and accessable again, but have no idea what to do.....
[Code]....
I need help with:
1. get them back to original partition system
2. get them mountable
A question though, the information/files i had on these drives/partitions is it lost ? or is it still there?
View 7 Replies
View Related
Apr 14, 2010
How do I determine what graphics card I am using in Linux? In windows it's no problem, but I don't know how to determine such things as a) what hardware am I using? and b) what driver am I using? After determining which hardware my display is using, what is the best way to manage the drivers to ensure i'm using the most up to date version?
View 7 Replies
View Related
Jun 21, 2010
how to change my display driver (eg. ATIMACH, VESA, etc.)
View 8 Replies
View Related
Jun 29, 2010
I'm new to linux. I'm using fedora 13, 64 bit, AMD athlon II processor. I tried to install ATI Catalyst Display Driver for linux but its giving following message
ATI Technologies Linux Driver Installer/Packager
which: no XFree86 in (/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin)
Error: ./default_policy.sh does not support version
default:v286_64:lib::none:2.6.33.5-124.fc13.x86_64:; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.tcXvmo
View 3 Replies
View Related
Jul 26, 2010
I did an upgrade of Nvidia(Latest version v.196) and KDE-base4 to KDE 4.4.4(I think) in Yast2. Now when I reboot the X doesnt start. I claim it can't find any nvidia-module. I thing the upgrade of Nvidia v.196 failed, so I need to know how to reinstall Nvidia in console(CLI). It only boot up in cli. I thought it is so simple to just download the latest driver and install in CLI, but my NetworkManager doesnt start eighter so I don't have any network.
OpenSUSE 11.2 64bits
KDE 4.4.x
Nvidia NV140 Quadro 512MB
I guess my mistake was to upgrade both KDE and Nvidia in the same operation.
View 4 Replies
View Related
Jul 27, 2011
I tried installing it via ctrl alt F1, i managed somehow to install it,i needed to because the old one was conflicting with my card(8800 Ultra), and this showed up when i typed in startx. Using ubuntu 11.04 [IMG] [URL]
View 9 Replies
View Related
Jul 15, 2010
In WinXP, with the nvidia drivers, there's fan control.By default, out of the box, my NVIDIA 8800 GTX card's fan blows at full speed (noisy). So when I'm booting up and I'm in the BIOS.. it's at full speed and loud. Once Windows loads up (and the drivers kick in), the fan goes almost completely silent. It stays that way until I load up something 3D intensive.. basically it runs the fan as needed.Does the default display driver shipped with Fedora 12 do this out of the box?What about the nouveau driver?How can I see the nvidia fans' speed while using the default display driver?
View 4 Replies
View Related
Nov 12, 2010
Fedora 13, x86_64, up to date. Trying to get nVidia Quadro NVS 140M to display on a projector the same as it does on the laptop screen, which is 1680 x 1050. I failed to do so with the nVidia driver (latest version), so I want to go back to the nouveau driver and try with xrandr. I have always used the nouveau driver with Fedora without an issue, but in my former life in Ubuntu I sometimes switched back and forth between the "nv" driver and the nVidia driver.
Doing so was trivially easy - just edit xorg.conf replacing "nv" with "nvidia" or vice-versa, then restart X. However, after installing the nVidia driver via Yumex and using the nVidia config utility, I find that now I have an xorg.conf file that is loaded with stuff I don't understand, except that at the top it says it was created by nVidia, and there are two places where it says the driver is "nvidia." I have searched and all I can find is instructions for installing the nVidia driver.
Apparently that is meant to be a one-way ticket, because I can't find any instructions for how to return to the nouveau driver. Except stuff that is over a year old, and complaints from users whose systems failed to start X. What would happen if I just replace "nvidia" with "nouveau" in the xorg.conf file and restart X? I know if it won't start X I can boot to rescue mode and re-edit xorg.conf, but I'd rather ask first and do it the right way than have to repair a broken system.
View 10 Replies
View Related
Jun 5, 2010
I have just upgraded to Fedora 13, and am trying to use the experimental Nvidia driver to enable Compiz desktop effects. The driver appears to be working correctly, but when I enable desktop effects, my text/icons/option menus are inverted (mirrored on both x and y axis's). Can anyone help me solve this issue? am i going to have to go to the proprietary Nvidia graphics driver?
View 8 Replies
View Related
Apr 22, 2010
I've manually installed the latest NVIDIA display drivers from the website (newer than the restricted driver package that came with 9.10). When there is a new Linux kernel, or a newer Ubuntu version, will I need to uninstall that driver before upgrading? Will having this driver cause any special installation issues during upgrade (such as the need to reinstall the driver after upgrading)? I am using 9.10 through Wubi.
View 1 Replies
View Related
Jan 28, 2010
I am using GeForce 7600 GSNot using the Nvidia X driver message you know... I searched all over, and seen this problem on many searches but no resolve issues.I want to be able to connect my tv, I use to be able to when I first installed Ubuntu and now IdK.
View 3 Replies
View Related
Feb 14, 2010
I would prefer to be able to use the rpmfusion nvidia driver instead of the closed driver but when I try it, KDE4 runs fine for a while but then the whole display starts blinking and the cpu % goes to 99% for XMy PC is Fedora 12 x86_64, the video card is a XFX 8800GT[URL]1) installed the kmod-nvidia-190.53-1.fc12.1.x86_64 and dependencies2) blocked nouveau with rdblacklist=nouveau in grub.conf, 3) Ran: setsebool -P allow_execstack on4) fixed the xorg.conf (I had to move my old xorg.conf out of the way and merged my DontZap option back in)
5) rebootedI did not yum remove the nouveau driver,.... didn't seem necessary.My desktop will run for a while but inevitably starts flashing uncontrollably. I can't even ssh to it to run init 3 to kill X (I can ssh to it but for some reason I can't su to root to kill X).
View 4 Replies
View Related
Sep 24, 2010
I have no display after attempting nvidia driver install and doing telinit 3
On hitting F2 I get these errors -
Code:
Is there anyway to boot in safe mode. I boot Fedora with GRUB2 and there isnt any failsafe entry for it. I have blacklisted nv driver already.
View 2 Replies
View Related
Jun 14, 2011
The display card of my notebook is ATI rd 6370m ,the OS is fedora14. After I installed the driver download from ATI web site, it says that my computer can only run 2D can't run 3D. I want to know if some one used the same card with me in fedora14 has run 3D sussesfully? After the installlation I run "#aticonfig" it says "can't find the adaper".
View 2 Replies
View Related
Aug 8, 2010
Can do nothing with the PC. New install of 10.04 and was prompted to install Nvidia driver. Did so. Rebooted, now have nothing except a thin line at top of screen. How can I remove this driver when I see nothing?
View 2 Replies
View Related
Feb 24, 2011
I'm running ubuntu lucid on a home-built computer with an ATI Radeon R300 NE [Radeon 9500 pro] video card and a cheap-o (Norcent) flat panel. Within the last week I've had a problem where the display gets horizontal and vertical stripes when I "wake it up" with the mouse. I can almost see what is supposed to be on the screen and I can use the mouse (the cursor is a big blocky area) enough to shut the computer down. Oddly, opening a new terminal (TTY1?) using Ctrl-Shift-F1 doesn't fix the monitor problem. Also, you can see the display problem when using xvnc4viewer from another computer.
I have found a number of similar issues in the forums, but haven't found a solution (nor can I find xorg.conf in lucid...). It just happened, so I wonder if it is something that broke in an update. There is nothing recorded in the logs that seem to apply to video problems.
View 2 Replies
View Related
Apr 8, 2009
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies
View Related
Jan 18, 2010
I did a horrible mistake due to lapse in my concentration. Here is the 80 GB IDE disk geometry:
=> C: Windows XP SP2 15 GB partition
=> D: NTFS parition - 10 GB
=> E:F:G:H: NTFS partitions on the Windows Extended partition.
=> On the same Extended partition, there exists Linux /swap and /root partitions.
What happened was:
a) I wanted to delete the H: parition which was residing adjacent to Linux partition
b) By mistake I opened the Explorer and clicked the Mouse on H: partition and left it like that (forgot)
c) I opened Add/Remove program list but did nothing, to do few uninstalls after partition deletion.
d) Now I opened compmgmt.msc for Disk Management then deleted the H: partition!
Then XP reacted strangely and got almost hung
e) Then I switched OFF and ON the PC.
f) Most shocking was GRUB screen vanished (crash console appears) which means that Linux partition got deleted instead of H: partition!!
It's important to share with you that Fedora Core 12 possess the default BOOT flag. I thought that it's nothing big deal, only a case of Boot flag toggle with DOS bootable CD but am shell shocked to find after hitting the fdisk from DOS it says Error reading the disk!!! I felt like collapsed for a while, don't know how I did such a mistake. how to boot into my Windows XP. I can't afford to loose data or bear the expense on Data recovery
View 14 Replies
View Related
Jul 10, 2011
I had Ubuntu 11.04 and Windows7 installed on my computer. I thought of trying fedora 15 and installed it on a different partition. Now only fedora and Windows boot up. Can I triple boot my system and how? If not, how to get back Ubuntu 11.04 and Windows 7 as before.
View 5 Replies
View Related
May 3, 2010
I played around with KDE and eventually messed up. My right click on the desktop doesn't work and the panel goes from the original color to black when I extend it. I even lost the "clickable" in the upper right part of the desktop. I already tried System Settings > Desktop > Defaults > Apply. Doesn't work for me.How could I revert to the default settings?
View 8 Replies
View Related
Oct 8, 2010
First off I'm loving my ubuntu experience on my other devices. My netbook and other laptops run wonderfully. I'm trying to get my HP dv6700 up and running but I'm having trouble right out of the gate. When I boot up on the CD the screen becomes "messed up". I can actually still see what is there, I just see basically three copies of everything, almost like it is out of sync. I assume this is a graphics card driver issue but how can I resolve this when it does it upon the installation screen? I'm trying to install Ubuntu 10.04.1.
View 4 Replies
View Related
Nov 26, 2010
I just did a new upgrade to Maverik, however I accidentally messed up my second hard drive in the process. I have read up on data recovery stuff and there are tons of tool... but I need to know what happened, then I can worry about the fixing. Ok, Standard P4 PC with two HDDs.
1 X 120GB for / & /Home
1 X 350GB for /Data
During the install I told the setup my second HDD is /Home (who knows why?? -stupid I know) and that its EXT4. (no format) Now I have a lovely clean HDD with /home. What happened here now??... There were no partition changes made, I did not format the drive.
View 9 Replies
View Related
Dec 3, 2010
The last update of a few days ago messed up the update manager. here is the error that I get. I do not have the time to hunt for bug reports to report this and don't know how anyway. maybe someone else can do it.
Could not initialize the package information An unresolvable problem occurred while initializing the package information. report this bug against the 'update-manager' package and include the following error message:
'E:Encountered a section with no Package: header, Eroblem with MergeList /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_maverick_main_b inary-i386_Packages, E:The package lists or status file could not be parsed or opened.'
View 2 Replies
View Related
Mar 7, 2011
So, I had Win7 and Ubuntu 10.10 in dualboot and after upgrading to 11.04 I managed to screw up GRUB, it didnt boot into Win7 anymore. After that I got rid of both ubuntu and swap partitions and merged them to Win7 partition via Gparted and made a clean installation of 10.10 again next to existing Win7 hoping to fix GRUB and be able to boot into Win7, but now when I try to boot into Win7, I only see '_' blinking on top left and nothing happens, Ubuntu works fine.
View 9 Replies
View Related
Apr 30, 2011
i upgraded my ubuntu to 11.04 and i didnt like unity. and installed gnome3 from ppa. then i couldnt login. tried to remove gnome3 and everything messed up here. when i tried apt-get install ubuntu-desktop, it gave unmet dependencies error. i tried bunch of stuff,none solved the problem. for now i installed xfce, and using it.
View 4 Replies
View Related
