Fedora Installation :: Custom Fedora On Usb - Does Not Boot From The 1GB Usb Sticks
Nov 10, 2009
A custom image of Fedora 6 was built on a USB stick of size 2GB.
The size of the image is 546MB and i need to build the image on a 1 GB USB stick.
-The partition on the disk is bootable and I have a grub bootloader
- BIOS is configured to boot from the USB stick.
The same set of files are copied to the 2GB usb sticks and the 1GB usb sticks.
The system boots out of the 2GB Usb disk but does not boot from the 1GB usb sticks.
I am not sure if this issue is related to the usb stick, which i dont think so. I tried it on a different USB stick of size 1GB and it does not work as well.
View 2 Replies
ADVERTISEMENT
Oct 15, 2009
I need to install a lvm2 group with encryption and have the /boot file stored within. Is this possible in Fedora's graphical installer? I know it can be achieved in Arch(I know I'll need grub2, I assume that's coming in Fedora 12) I can always install it separately.
View 6 Replies
View Related
Dec 28, 2009
Just spent three whole days barking up the wrong tree, solving Fedora 11 and Fedora 12 boot failures because the correct hypothesis was illogical: installation did not update/modify the initrd.
The first couple of times I installed Fedora 11 on the HighPoint Technologies RocketRaid 2640x4, the installation inserted my "custom" driver module (rr26xx) into the initrd, permanently, so that the system booted off the controller card for which the custom driver was inserted. (I yelled about this success in this thread: [url]
My most recent installs of BOTH F11 and F12 on the RocketRaid failed to properly set up the boot. It turns out that the "rr2640" module I "slipstreamed" into the installation process was *NOT* permanently added to the initrd by anaconda. (F12 gave me "no root device found boot has failed, sleeping forever", on boot; F11 hung also, without such error, I presume, during the init script execution). Because of limited resources and time, I only know for sure the module was missing from the F11 initrd, and am ASSUMING the same was the case with F12.
The only difference between the successful installs and the ones with failed boot is that the successful installs were made on a single-drive (JBOD) mode on the controller; whereas, the failed ones were placed on RAID 5. But, AFAIK, the created logical device for the card is "/dev/sda", in both cases, and the kernel can not distinguish between the two cases (or can it?). Thus, the inconsistency cost me a lot of time, and is still inexplicable to me.
Question: What is the best way to deal with custom drivers, today? There are custom spins, and many tools, like isomaster. Stupid question: Is there a way to modify the initrd inside an installer ISO -- be it for CD/DVD/USBboot drive -- beefing the init RAM disk with whatever modules you'd like, for the boot process (using, say, isomaster)?
And what makes anaconda understand that a module must be added to the initrd ? How can one force anaconda to do so?
How does moving to dracut as the initrd tool affect any/all of the above?
View 1 Replies
View Related
Oct 26, 2009
The stock F11 kernel is very buggy on my system, so I built a new one. But I can't install it. My Kernel does not appear in the /boot partition, and does not appear as vmlinuz anywhere.
I followed the instructions on [url]I tried:
And now I can see my kernel listed when I do
What do I do to really install my kernel?
View 1 Replies
View Related
Jun 15, 2011
I'm going to try and install fglrx again, however last time it killed my system, giving me a 'display not detected' error on my monitor with no way to reach a non-grapgical tty to edit xorg.conf.Is it possible to create a custom grub entry that will boot Fedora 15 with the Radeon drivers in case fglrx once again trashes my system?
View 2 Replies
View Related
Nov 17, 2009
I used to use Unison to synchronize files between various Unix/Linux computers. I've an USB stick onto which i put files I've to keep with me (when I work outside home). When I get back home I'll like to synchronize with my laptop running Fedora 11. If the file is on the usb stick no problem, it gets copied onto my home directory and everything is fine.
But if the file has to go onto the stick, Unison complains it can't set the file's permission (of course, on a Vfat file system) and refuse to copy it. Question : Do you know a way to avoid setting irrelevant permissions on a file with Unison or an other utility of this kind ?
View 1 Replies
View Related
Nov 23, 2010
I installed F13 on a few ACER desktops with 4 GB ram. Recently I tried to upgrade the RAM to 8 GB. But after I plugged in the extra two 2GB ram sticks inside, the system still feels 4 GB. I had double checked with ACER and confirmed that 8 GB is supported by the motherboard. Is there any shortcuts to let the system recognize all the 8GB ram rather than reinstall the whole system.
View 13 Replies
View Related
Nov 30, 2010
I installed Fedora 13 x86 64 on my Dell system as Installation rimpo it has not installed gcc and related lib files. Any other addon I am trying to add to my system looking for gcc, so I could not install any thing on it. I tried with gcc rpm file but it again looking for several files I find these files on 3rd CD of Fedora 13 But I could not install them. And now my net connection asking for rp-ppoe file which also require gcc etc. So I could not connect net as well.
View 8 Replies
View Related
Sep 23, 2009
I installed Fedora 11 on a server with 2 equal sized disks. I used the gui installer and didn't make custom setting changes to the partitions. One of the steps asked for me to choose the disks i wanted to use for this installation. I selected both disks and after the installation Fedora only sees one volume the size of both disks combined.Do I now have software raid0 or do I have something else?
View 3 Replies
View Related
Nov 29, 2009
I have several partitions on my hard drive, and like to use the 'Create Custom Layout' option during the installation process, to make sure that I don't loose any of my existing partitions or the data on them.
I have attempted a minimal F12 installation from Fedora 12 DVD. But the 'Create Custom Layout' option is not an option in the menu.
How do I install F12 and tell anaconda exactly which partitions I want to use and format?
My current working partition layout is shown in the attached screenshot.
I want to use the following custom partition layout during the initial F12 installation:
Code:
/dev/sda2 / Fedora-12-root
/dev/sda3 SWAP
/dev/sda11 /var/log/ var-log
/dev/sda12 /tmp tmp
This allows me to share existing partitions between my current working F10 root partition, and the newly-installed F12 root partition. So if there are problems with the new F12 installation, I still have a working F10 system to fall back on.
The other partitions with data on will be mounted when the intiall installation has been completed
View 4 Replies
View Related
Dec 27, 2009
Since the kernel of F11 live-cd can't recognize my video card, I have to run it in text mode. I also have to run "liveinst" in text mode and the install progess seemed ok. But on the partitioning selection step, there is no "custom layout" option! I rembered that in the graphic mode there was such option. How can I find it in the text mode?
View 2 Replies
View Related
Aug 17, 2011
I am trying to install fedora15, my devices are as follows:
/dev/sda1- contains windows recovery
/dev/sda2- contains windows vista
/dev/sda3- free space
/dev/sda4- where fedora10 is existing.
Basically I want to scrap the fedora 10 in /dev/sda4 and install fed15 on the place (ext3). During the installation process fedora asked me, Which type of installation you want? I choose 'create custom layout'.
Then in the next window that appeared I choose /dev/sda4. Then it gives me four options like
Create Edit Delete Reset
I want to know what does this Delete mean. What will it do, will is erase all the older partitions within /dev/sda4 i made for fedora10 (previously I made three partitions /boot, swap, /) or will erase /dev/sda4 itself. I am scared to continue installation further.
View 10 Replies
View Related
Nov 22, 2010
Im trying to shrink a 80 Gb ntfs partition. but when i clicked the shrink option the partition is like this:
"sda1(ntfs,0 mb)".
how to free up space in creating custom layout.
View 1 Replies
View Related
Oct 17, 2009
I've recent begun to want to create a spin of Fedora for my high school to offer as an alternative to Mac OS X and Windows. My first attempt with any distro was to try and use Suse Studio, however nothing with packages that I downloaded myself would successfully compile. I then thought that I might try and use some sort of local program do create it with and tried Revisor, however when I made Live Media, Xorg wouldn't start and when I made DVD Install Media the kernel would kernel panic every time on boot.
Is there anyway to solve the problem with Revisor or are there any alternatives?
I have also tried using Ubuntu with the Ubuntu Customization Kit however that didn't work either considering I have to have it in a virtual machine.
View 1 Replies
View Related
Jun 22, 2011
I am compiling and installing the custom kernel based on the instructions provided in Building_a_custom_kernel on fedoraproject.org/wiki site.
However, according to the instructions, anytime I change anything in the kernel source files(e.g /driver/ata/libata-core.c), I have to create a patch a rebuild the whole kernel and install this new kernel which takes 2 hours. Is there a simpler way of recompiling what has changed(without creating patch) and try that changed kernel? Since my changes are not in the drivers which can be dynamically loaded but is in the static code of the kernel, it is making life cumbersome.Are there any instructions for this? How does other kernel developers manage this?
View 2 Replies
View Related
Feb 20, 2010
im not very educated in amd processors, but i think that they are all 64-bit processors.
i downloaded the amd ubuntu 9.10 into my computer, and used the usb maker utility in the system menu. i put in in my new pc (it was given to me), and i tell it to boot into the usb.
then i get this. i am posting a pic.
sorry about the sideways pic. i took it with my phone.
anyway, i get the syslinux boot shell script thingy. i have tried lots of things. linux, vmlinuz, lots of other things i found online. so what im wondering is the exact name of the kernel in ubuntu 9.10 amd version.
View 4 Replies
View Related
May 11, 2015
I didn't change anything; it just stopped working on boot. I've changed permissions according to messages from log files. No good.I now get messages saying "unable to open display ' '." If I set the display (I've done this several ways, the messages say "unable to open display ':0'."
Systemd is taking control of everything basic, with almost no documentation and no configuration tools at all: rationalization by lunatics.You can make a script to run commands on boot using systemd on Jessie by creating two files: the script, in any location a file in /etc/systemd/system that runs that script..My script is called james-boot.service, placed in my /home/james/.bin directory.
#! /bin/sh
# this is run by /etc/systemd/system/james-boot.service
# Enable with sudo systemctl enable james-boot.service
# Check with sudo systemctl status james-boot.service
# If it says the service is loaded, it's OK -- inactive only means it's done running.
[code]....
This file must have ownership root.root, with (apparently) permissions 664 (rw-rw-r--).After creating, enable with sudo systemctl enable james-boot. service.Check with sudo systemctl status james-boot.service. If it says the service is loaded, it's OK -- "inactive" only means it's done running.
View 4 Replies
View Related
Jul 15, 2010
I used Ubuntu customization kit to "build" my own Ubuntu. It works as a charm. Completely recommended.
I install that custom ubuntu 10.04 on a 2gb pendrive, using usb-creator-gtk and it worked also good.
The only thing is bodering me, is when I boot that pendrive, it appear a window asking if I want to install the OS or if I want to use it live.
How can I remove that window on boot?
I want to boot directly on desktop...that way will be perfect!
View 1 Replies
View Related
Feb 14, 2009
I'm setting up my first Linux install and I was wondering if I would be able to boot Fedora from a CD while keeping every other file on my computer, or in other words if I would be able to put the /boot partition onto a cd. I've also read that Linux can be booted entirely from a logical partition. If that's true then can anyone help me in setting that up. Mostly my problem is I already have four primary partitions, one being a logical drive with plenty of free space in it, and I can't get rid of the primary partitions I already have.
View 1 Replies
View Related
Jun 1, 2010
When i boot the fedora image from a dvd i'm not being taken to the fedora live system screen, instead i see a bunch a words on a black screen (looks like DOS)...am i having compatibility issues or what? ive tried 32bit, 64bit versions as well as different desktops. does anyone have any ideas? my laptop is brand new: toshiba e205 running windows 7 ultimate..
View 2 Replies
View Related
Sep 2, 2010
So I decided to build a server using two HDDs and after checking the net I decided to go with Software RAID.Before I mess around and go ahead and buy two 500 GB HDD, I decided to try it out first in virtual box.(my system is F13 64bit with 4GB)
I set up a virtual machine with 2 X 10GB HDD.Mount the live CD (f13 32bit).Run regular install > choose custom layout and do as follows: SDA & SDB will both have Software RAID 500 MB and another software RAID of about 9500 MB I will have md0 /boot (sda1 & sda2 = 500 MB) And another md0 having LVM group loaded with / + SWAP I choose to install boot loader on md0 the first time and I receive the following error when I boot from HDD: FATAL: INT18: BOOT FAILURE I tried installing boot loader on sda same thing.
View 2 Replies
View Related
Aug 17, 2011
So I want to install the original version of Fedora 15 and make it dual boot with my Windows 7. Problem here is that I don't have a cd/rom. and the iso file didn't have a .exe thingy.....
so now what? Also this is my partitions> http://img94.imageshack.us/img94/9853/unledtlh.jpg
View 4 Replies
View Related
Jan 31, 2009
Originally I had Ubuntu running on my machine. I installed windows beta 7 with a working dual boot. Get everything working in grub again. I decided to give Fedora a try and wiped my Ubuntu partition and installed Fedora. Everythings all good...except the reconfiguration of grub has left out my Windows 7 partition (nothing out of the norm) I tried manually adding windows 7 to /boot/grub/menu.lst but it's not working, when I try to boot into Windows 7 i get a little flashing "_" for a really long time and nothing happens.
View 2 Replies
View Related
Jun 27, 2009
i have insatlled fedora 9 on a system with xp already installed on it but when i start fedora it hangs while booting. after starting the service ANACORN it hangs and same happens with fedora 10. it hangs while starting CUPS.
View 2 Replies
View Related
Jul 28, 2009
I tried a number of times to install dual boot with Win2k. I keep getting errors at the stage of setting up the partition for the install. When I try to choose ext4 it says Fedora cannot be installed on a bootable drive, fix the problem. I don't see how to fix it...it does not say what to do or change.
I have had other linux installed in the same partition without a problem. What gives?
150GB drive for both OS's Separate drive for data, not involved in the install.
| 72GB NTFS Win2K | 76 GB free for ext3 and swap |
LBA support on in Bios.
View 14 Replies
View Related
Nov 11, 2009
I didnt know where to ask this question but if anyone could direct me I would appreciate it.I would love! to remove the fedora Boot image progress bar when I choose to run Fedora, Is it possible to have this removed and just show my the inner working's like it did with older linux distros? where it has the lovely
blahBlah [OK]
blahBlah [OK]
blahBlah [OK]
[code]...
View 8 Replies
View Related
Oct 20, 2010
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies
View Related
Jan 8, 2009
I'm having trouble getting my computer to dual boot between vista and fedora 10. I 'know' that both are installed, but only 1 will boot at any given time. for instance, i've been using fedora 10 for a few months now, but only this os will boot from the grub menu. to boot vista, i need its install dvd, where I choose the command prompt, and then 'bootrec /fixBoot', 'bootrec /fixMbr'. After this, Vista will boot fine, with all of my data files untouched, but now Vista is the only option that works.
To get back to Fedora, I need its installation dvd, where I go through the motions, and choose to update an installation. Again, now Fedora is the only os that works. I would like to have them both just work, but all I can do is a 'faux' install with the dvd of whichever one I want.
View 8 Replies
View Related
May 13, 2009
I am by no means a computer newb but I'm having alot of trouble finding an article and or guide on the net that explains in clear detail how to isntall Fedora 10 onto a computer with Windows Vista installed. Let me explain, I have two identical hard drives on my system. One for Vista and the other, for Fedora 10. I've installed Fedora 10 onto the other hard drive, and so as to not damage my vista patition in any way i asked that the Fedora installation boot from the other hard drive, which is where the boot laoder for the fedora 10 was installed.
All went well and the installation went be smooth as silk. However after rebooting all my system does is boot into Vista, no boot loader menu screen, what gives?
View 7 Replies
View Related
Aug 13, 2009
I am an amatuer with linux(fedora 11) and was trying to install it on my laptop which has vista installed on it. I have already allocated 120 GB to the vista partition(NTFS file system) and left 27GB of unpartitioned space on the drive. I tried installing fedora 11 the first time and my vista was absolutely corrupted. I was wondering if someone could guide me with the selections I have to make while partitioning the drive using the fedora installer DVD.
View 14 Replies
View Related
