Fedora Installation :: How To Boot Fedora 10 With Vista Isntalled
May 13, 2009
I am by no means a computer newb but I'm having alot of trouble finding an article and or guide on the net that explains in clear detail how to isntall Fedora 10 onto a computer with Windows Vista installed. Let me explain, I have two identical hard drives on my system. One for Vista and the other, for Fedora 10. I've installed Fedora 10 onto the other hard drive, and so as to not damage my vista patition in any way i asked that the Fedora installation boot from the other hard drive, which is where the boot laoder for the fedora 10 was installed.
All went well and the installation went be smooth as silk. However after rebooting all my system does is boot into Vista, no boot loader menu screen, what gives?
View 7 Replies
ADVERTISEMENT
Jul 8, 2010
I have 3 operating systems installed to my computer.
Windows 7 64 Bit
Windows XP 32Bit
Ubuntu 9.04
The problem I am facing is this: I recently installed XP on a drive that up until now had a Vista install on it. My Grub loader used to be the main boot loader for my computer. But when I choose Windows Vista (Which is pointing to where xp is isntalled) I get an error message. When I choose seven I get an error message.
Infact the onlly one that works from the grub menu is ubuntu itself. So to get to Windows XP or Seven I must choose the hardrive in the bios. So how do I get the grub loader to point to the correct place to make it load seven and xp?
View 9 Replies
View Related
Jan 8, 2009
I'm having trouble getting my computer to dual boot between vista and fedora 10. I 'know' that both are installed, but only 1 will boot at any given time. for instance, i've been using fedora 10 for a few months now, but only this os will boot from the grub menu. to boot vista, i need its install dvd, where I choose the command prompt, and then 'bootrec /fixBoot', 'bootrec /fixMbr'. After this, Vista will boot fine, with all of my data files untouched, but now Vista is the only option that works.
To get back to Fedora, I need its installation dvd, where I go through the motions, and choose to update an installation. Again, now Fedora is the only os that works. I would like to have them both just work, but all I can do is a 'faux' install with the dvd of whichever one I want.
View 8 Replies
View Related
Aug 13, 2009
I am an amatuer with linux(fedora 11) and was trying to install it on my laptop which has vista installed on it. I have already allocated 120 GB to the vista partition(NTFS file system) and left 27GB of unpartitioned space on the drive. I tried installing fedora 11 the first time and my vista was absolutely corrupted. I was wondering if someone could guide me with the selections I have to make while partitioning the drive using the fedora installer DVD.
View 14 Replies
View Related
Dec 1, 2009
I installed fedora 12 as second os along with ulimtate vista on 64 bit machine.
I was able finish the install and boot to fedora first time. but after updating the software , i am unable to boot into fedora but am able to boot in to vista.
I am using a HP Pavilion HDX9000 notebook series. it has 2 100gb hdd. vista is on c and fedora is on d. boot info was written to MBR on C drive.
View 1 Replies
View Related
Jan 28, 2010
Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
0x0000007B (0x80399BB0, 0xC0000034, 0x00000000, 0x00000000)
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
[Code]....
View 8 Replies
View Related
Mar 27, 2009
I installed fedora 10 on my laptop as a partition with vista. However i'm now not able to boot into my vista partition as everytime I try it comes with an error saying "bootmgr" is missing. Below is whats in my grub.conf file. However I am able to access my vista partition through fedora.
default=2
timeout=5
splashimage=(hd0,4)/grub/splash.xpm.gz
[code]....
View 1 Replies
View Related
May 6, 2009
I have a PC with two 40 Gb hard drives. Vista is currently installed on drive 0. Nothing is installed on drive 1. If I switch cables to the drives, Vista will be installed on drive 1. Nothing will be installed on drive 0. If I then install Fedora 10 on drive 0, will it automatically detect Vista on drive 1 and allow me the option of using Grub or something else to boot it? I want to avoid having Vista overwrite my MBR, but I don't want to piss my wife off because she can't access windows for two weeks while I figure out how to customize Grub or install something else. If I need to customize Grub, (or some other boot loader), I would need step by step instructions. Is there a book or online tutorial?
View 4 Replies
View Related
Oct 2, 2009
I have a windows vista and fedora 11 64 bit dual boot. my diskstructure is as follows:
I have a swap of 6 gb.
I dont want to loose any of my existing OS's.
View 1 Replies
View Related
Feb 21, 2010
I just installed Fedora 12 on my Windows Vista machine.Now when I boot my computer it shows two optionsFedoraOtherThe `Other` one would be Windows Vista.Its okay if I boot into Fedora, but if I boot into Vista, I get the following error:
Code:
BOOTMGR is missing.
Press CTRL + ALT + DEL to reboot.
[code]...
View 14 Replies
View Related
Jun 11, 2009
One of the screens in the installer( middle of screen) will show what systems are on the grub menu, and one will be marked the default.
If the vista is not there (usually indicated by other), then click the add and select the correct boot partition (sda for vista) and change it's label to Windows Vista.
If other is there, click the edit button and change other to Windows Vista.
Finally, click the check box for the one you want to be the default boot. (you can always change that in the grub.conf later.)
View 14 Replies
View Related
Aug 27, 2009
I have Windows Vista Home Premium and I don't want to switch entirely to Fedora because I'm not as familiar with it as I am Windows. I mainly wanted to install Fedora for my Linux class at the Community College I attend. How do I install it with a dual boot so it doesn't take over Windows Vista? I had that happen once and it was a mess to fix and reinstall Windows Vista too.
View 7 Replies
View Related
Jun 7, 2010
I have been using Windows Vista since I bought my laptop. Due to the need to use another operating system, I decided to go for Fedora. I read a some installation guides and was told that dual-booting will allow me use both OS without problems.Last night, I created three partitions on the hard disk, one of them is the primary partition for my Vista OS. Then I went ahead to install Fedora on one of the other partitions. The Fedora worked fine. Subsequently, I wanted to check some stuffs using Vista, but the computer showed my some prompt that said that my BOOTMGR is missing. However, Fedora still boots and works perfectly.Please what should do? I didn't back up my documents before installing the Fedora. How do I go back to Vista without formatting my hard disk.
View 14 Replies
View Related
Sep 13, 2010
I have been messing around with F13 in VM VirtualBox for awhile now. I have read in some places that it is better to install F13 into its own partition on the hdd creating a dual boot system for, in my case, Vista and F13. Any truth to this? I have been having problems with system settings in F13 while using VB. i.e.: sometimes the system will see 3d support, other times it won't. Sometimes it will see ethernet eth0 and then other times it won't. All my hardware from my MB to Display is supported according to the documentation I have looked at.
View 2 Replies
View Related
Jul 2, 2011
I'm new to linux systems and just installed Fedora 14 onto my Windows Vista laptop. I chose the shrink existing system option and then proceeded to install Fedora. The only problem is that when I choose Other in the Grub boot menu my Windows Vista goes straight to the recovery screen and does not boot. I don't want to do a point recovery. Is Vista not running because I shrunk it or because of some configuration that I did not add in the Grub files. How to solve this problem and get Vista running properly from the dual boot menu?
View 2 Replies
View Related
Jan 12, 2009
I'm stuck with installing Fedora Core I have 2 hard drives both 80Gb I want to install a fresh copy on one of the drives to do a dual boot I have vista on the main hard drive this is where I am at Installation requires partitioning of your hard drive by default, a partitioning layout is chosen which is reasonable for most users. You can either choose to use this or create your owe. Select the drive to use for this installation?
View 10 Replies
View Related
Mar 7, 2009
I am new to Fedora, having used Ubuntu for 2 years. However, I am a little dissappointed in the latest Ubuntu releases and want to try something new. So I installed Fedora 10 on my second hard drive, deleting Ubuntu. On my first hard drive, I have Vista installed. During installation I followed a guide for dual-booting and it said not to install Grub to the MBR of the Windows partition, so I followed that advice...
This caused a Grub error 15 on the next boot. I booted the Fedora installation from the second hard drive. My hypothesis is that the Grub bootloader of Ubuntu was still installed somewhere and it could not find the Ubuntu linux kernel. Therefore, it gave error 15. So I installed Vista again and am hesitant to try Fedora again... How can I install Fedora alongside Vista properly (as dual boot)?
Or should I stay away, because it is apparently too difficult for me? Is it worthwhile to make a separate /home partition as I read that it is preferred to do a clean install every release? Could I just do that with Gparted and then assign the partition as /home in the Anaconda installer? The downside is that I then need to create a swap and / partition too, right?
View 6 Replies
View Related
Nov 6, 2009
Shrinking the Vista partition and format the rest of the HD as ext4 and install Fedora into that partition and put the GRUB in MBR, is this the right way to dual-boot fedora with Vista?
View 4 Replies
View Related
Jan 2, 2010
Usually I have no problems with linux but with fedora it didnt automatically set up the dual boot with vista. I cant remember how to set up grub to boot vista, how to set this up.
View 1 Replies
View Related
Jun 9, 2011
I have been trying out different Linux distros to dual boot with Windows Vista. First I tried Ubuntu and it worked fine. Then I tried Fedora 15 and it worked fine as well. Then I went back to Ubuntu but now I have decided to stick with Fedora. The first time I installed Fedora it gave me options for choosing default OS and other things, now I can't remember how I did that and can't figure out how to do that agian. How do I do that agian? I want it to automatically boot into Windows Vista. I am installing Fedora on a seperate hard drive.
View 1 Replies
View Related
Aug 24, 2011
Partition limit is 4 on my Inspiron 1525 so even with the space available I cannot create a Fedora partition because:
50MB for Dell Diagnostics
**GB main vista partition
10GB recovery partition
2.5GB MediaDirect partition
I'm trying to dual boot vista/fedora. I know I can delete the MediaDirect partition but that causes boot problems if the button is pressed while the power is off. I'm not sure which of the 3 Dell Partitions to remove.
View 2 Replies
View Related
Jan 25, 2009
I did a fresh install of Fedora Core 10 32bit on my Caompaq Presario AMD 64 laptop which originally only had Vista ultimate 64bit. When I go in to grub and choose windows I get a screen that says:
Windows failed to start...
File: windowssystem32winload.exe
Status: 0xc0000225
Info: The selected entry could not be loaded because the application is missing or corrupt.
View 9 Replies
View Related
Jan 15, 2009
I installed the live CD version of fedora (dual boot with vista) on my laptop. After I connected to the internet the updates downloaded and all went well. however when i restarted at the boot screen I found two instances of fedora such as
Fedora(2.6.27.9-159.fc10.i686)
Fedora(2.6.27.5-117.fc10.i686)
Other
The "other" is vista. I am wondering if this is OK or whether I have two fedora. If so i would like to remove one of them to save disk space.
View 5 Replies
View Related
Feb 9, 2009
i'm tying to dual boot Vista64 (already installed) and Fedora 10 x86_64. I am running a Dell XPS 410 running 2 sata hard drives raid 0 (ICH8DH). I started the process by shrinking my C drive on disk0 leaving 64.45GB of unallocated space. Next I rebooted into Fedora install DVD and when i get to blue graphical install screen i get message asking if my drive is GPT and if it is it may be corrupted. I click NO, and it comes up with a message telling me i have to initialize my drive if i want to use it ( have to click NO twice) and if i do it i will lose all my data.
i can click no and keep proceding through the install until i get to the partition setup screen. No hard drives or partitions are shown. I've tried googling the problem and get bits of pieces of information scattered in different parts but nothing conclusive to my problem i think. As far as my background of knowledge goes, I'm new to the linux community but give me a thorough guide and i'll do fine (i hope). I've been using fedora on a separate laptop for 2 days now .
View 9 Replies
View Related
Sep 4, 2010
I had installed Fedora 13 on an unused partition of my ATA hard-drive yesterday. The primary OS here was Windows Vista.
Anyway, everything was working fne for coupla hours after which I had to restart F13 for some reason. This is when all the trouble began ..
Fedora wouldn't boot cause of some "power issues" - there were none. Windows Vista wouldn't boot because "BootMGR was missing"
I figured if I removed Fedora using the live CD - format the partition, it would help. It didn't. Well, atleast the partition got formatted. I tried re-installing F13 from the live CD but it doesn't finish the process - saying a command, something to do with 'shutdown' is not valid.
I tried repairing Vista from the Installation DVD but it is unable to do so.
Right now, on rebooting the computing, I enter the 'grub' console. I tried using grub commands to boot "Windows" from the (hd0,0) partition like thus,
Code:
grub> rootnoverify (hd0,0)
grub> makeactive
grub> chainloader +1
grub> boot
But it still maintains that "BootMGR is missing" .
View 4 Replies
View Related
Aug 16, 2009
install fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"
View 3 Replies
View Related
Nov 18, 2009
i have recently started my masters degree program and i have to install fedora 11 for one of my courses. The problem is when i try to install fedora 11 on my laptop, it wipes out my windows vista installation. I want to keep vista. I have a sony vaio laptop model VGN-FW340D. 4GB RAM and 400 GB HD. i first shrink my hard drive to free up around 100 GB. Then i run fedora 11 DVD and let it make the partitions on my free space.. I have tried everything.. I chose use free space the first time, but i didnt work, it wiped out my vista, next time i chose custom layout and defined boot, root and swap partitions , but again it wiped out my vista.. I have read many guides to dual boot vista and fedora and have carried them out step by step, but nothing works.... Also i dont have vista installation DVD, i just have the recovery CDs, so everytime it wipes out my vista, i have to do system recovery, ive been trying for a week now, and its driving me crazy, i asked a friend of mine to help me out, he has dual boot system, and he tried it and it did the same thing, wiped out my vista... i just have one drive C: with two partitions, one small partitions which contains recovery files, and the rest of the partition has vista.......
View 7 Replies
View Related
Jun 26, 2009
I actually have a Suse running on a partitioned harddisk of 27GB but I prefer Fedore anyway. I would like to install Linus Fedora on my computer to make a dual boot system (Vista and Linus) by overwriting the previous Suse. My question is
Will I be in OS booting trouble (i.e unable to resurect the previous boot screens, windows might possibly be deleted, or not be present in the boot options) if this is done ?
Also, because I have only one disk (the first disk of Fedora 11 downloaded), will it be fine with just one first disk ? (there are several to download but I think I assume I am not going to use all of them during installation, right ?)
View 6 Replies
View Related
Dec 26, 2009
I know how to do a dual boot. I have done it many many times. But 1 I always installed Windows first so I would not have any problems with Fedora grub, and 2 the computers I did dual boots on were ones that I didn't really care if something went wrong on. But I want to do a dual boot on my laptop which I do care if something goes wrong on. I have all my stuff backed up so its ok if I something goes wrong and I have to reinstall. But I would rather not have to set everything up on my laptop again. So my question is what is the best way to do a dual boot with Windows Vista (the one that came with my laptop) and Fedora 12. I already have Fedora 12 on my laptop. I need to do these things:
1. Make my Fedora 12 partition smaller to make room for Windows Vista.
2. Install Windows Vista without Windows Vista Grub messing up my Fedora 12 grub.
I understand that I am doing this at my own risk so please dont not respond. Like I said I have all my data backed up so I can reinstall if I need to. I would rather not but its doable.
View 2 Replies
View Related
Aug 22, 2010
I've vista and Ubuntu installed in my system.now I want to install fedora 13,so what do I need to add to Grub to be able to tri-boot. my configuration.vista is in /dev/sda1 partition.Ubuntu is on /dev/sda3 partition. I would like to install fedora on /dev/sda2 partition.
View 11 Replies
View Related
