Fedora Installation :: Can't Find Any SHA1SUM Files To Give Correct Character Sequences

Sep 27, 2009

I have downloaded both versions of Fedora 11 (Gnome and KDE) to iso files on my hard disk - in Windows XP. I then tried the verification procedure advised in [URL]... section 3.1. I have successfully installed and run hashcalc, with the SHA1 option, and got the following results:

- for the Gnome version : 795b52b3c7b16eba6f2cae055ec894d8648d8095
- for the KDE version : 38ef6c97e29803add28d40add05aa025b6f4c92b.

But I can't find any SHA1SUM files to give me the correct character sequences against which to compare the said results.

View 7 Replies


Fedora Installation :: Check Sha1sum For Iso?

Nov 5, 2010

Where I can find sha256sum value for installation .iso file of fedora 8 and same others version of fedora

View 2 Replies View Related

Fedora Installation :: Can't Find The Correct Drivers For Graphics Card

Nov 20, 2009

Last night installed Fedora 12 64 bit KDE, but can't find the correct drivers for the above graphics card.

View 1 Replies View Related

Fedora Installation :: Sha1sum On Cd Iso Is Wrong - But Consistent

Jan 22, 2010

I downloaded the disc1 iso from [url] and ran it through sha1sum and got 5063ec... (the exact digest is in the virtual console, so I can't copy and paste). But the sum shown in [url] is different, so I removed the iso from my file-system and re-downloaded it. I ran the second download through sha1sum and got the same (wrong) digest as before: 5063ec...

Now, I may not understand fully how sha1 works, but I'm pretty sure if the faulty digest was wrong because of a download error, it would be -very- unlikely that I would get the same wrong digest twice. What is going on here? Is the error server-side or something? Or do I just have terrible luck, or do I not fully understand sha1 sums? Or maybe sha1sum isn't the right command to run?

View 7 Replies View Related

Server :: Cannot Find Any Log Files That Give Me Any Information

May 28, 2010

When I try to hit my jsp pages all that gets displayed is the source code.I cannot find any log files that give me any information. It seems as though apache is not forwarding requests to tomcat6 but I cannot verify this. I need some direction on what is happening here. I'm lost and have run out of options.Would JAVA classpaths cause this type of behaviour if they are wrong?

View 2 Replies View Related

General :: Sha1sum A Folder And Files?

Nov 2, 2010

Is there anyway to make a hash (or similar), of a folder of files, for data integrity purposes?

I tried with sha1sum, but it cant do it.

Is it possible with some other software?

View 2 Replies View Related

Server :: Apache2 And Frontpage Support - Can't Find The Correct Files?

Jun 28, 2011

i want to ask for a guide how to install frontpage extensions on apache2 , i searched a lot but i can't collect the pieces , in the most cases i can't find the correct files..

View 5 Replies View Related

Security :: Ssh/pam When Trying To Ssh In / Give It The Correct Password But Not Accepting?

Apr 1, 2010

So on one of the Linux systems here (2.6 kernel if it matters), there's some weirdness regarding trying to ssh into the system. Basically, if you give it the wrong password on the first ssh attempt, it will give you two more attempts, but even if you give it the correct password, it still won't let you in on those subsequent attempts. (If you give the correct password on the first attempt, it will let you in.)


user1@machine1# ssh user2@machine2
user2@machine2's password: <wrong password>
Permission denied, please try again.

The system has sshd configured to use pam (i.e., UsePAM set to 'yes' in sshd_config), but I'm kind of a PAM dummy.

View 2 Replies View Related

Fedora :: Importance Of Sha256sum Compared To Sha1sum?

Dec 24, 2009

I understand that md5sum had some faults where it would get the same checksum on 2 different files.What exactly are the benefits of sha256sum compared to sha1sum?

View 1 Replies View Related

Fedora :: Delete Character MS-DOS Text Files On System?

Aug 17, 2011

We had seen some time ago, various tricks to remove the character MS-DOS text files on Linux. Here is a new trick to do this directly from the vim editor.
to convert a file opened with vim in UNIX format, simply use the following command code...

View 2 Replies View Related

Fedora :: Run C++ Program On Fedora And It Give Errors Of Its Header Files?

May 22, 2010

i have a c++ program and i tried to run it using gcc command and it gives header files error i got the header file now but dont know where to place those files?can any one got the idea??? we could not place header files in usr/include folder!

View 7 Replies View Related

General :: Use The Man / Info / Apropos Pages - Character Instructed The Shell To Interpret A Special Character As An Ordinary Character?

Mar 27, 2010

1.What character instructd the shell to interpret a special character as an ordinary character?

2.What directory contains some of the utilities available on the system in the form of binary files?

3. What command is used to search the location of a utility?

4. What command is used to instruct the editor to write the file and quit the editor?

5. What key quits the more utility and displays the shell prompt?

6. What command starts a child shell as the super user, taking on root's identity and environment?

7. Which wildcard characters can be used for searching all the files in the system that start with "A"?

8. The user name or login name of the super user is????


View 10 Replies View Related

Red Hat / Fedora :: Fedora Shell Scripting \ "Find In Curent Folder For Files, And It Copy First File He Find With Name Gived By User?

May 18, 2011

shell scripting in Fedora14I want a script"Find in curent folder for files, and it copy first file he find with name gived by user, if name already exist then echo error message and finish"command usage " bash scriptname copyASname"

smthing like Code: #!/bin/bash
for files in /home/user/*


View 1 Replies View Related

General :: Can Give SWAP AREA After Installation Of Fedora

Jan 24, 2011

I ve installed Fedora14 i686 Spin edition.my laptop config: core2duo processor,4GBram,500gb hdd.Problem:I ve 4 partitions....XP in C drive 23GB, D:210GB;E:236GB & in remaining space around 30GB, i installed Fedora while installation i didnt aware of SWAP AREA & while installing i got WARNING:LESS SWAP AREA but i ignored it..now no freespace.can i create SWAP AREA now? that to without reinstallation.HOW CAN I GIVE SWAP AREA?

View 1 Replies View Related

OpenSUSE :: Find What Device To Use For A Character Something Plugged Into USB

Apr 27, 2011

There are so many system information tools i figure that this one would be in the set. I just can't seen to find it.

View 9 Replies View Related

Ubuntu :: Output From Find Has No Space Esc Character

Mar 9, 2011

I'm trying to copy all my photos from a windows drive to my Linux partition. So i created this small one-liner:


the output from find has no space esc-character, i.e. /path/sub folder should be /path/sub folder.

View 3 Replies View Related

Ubuntu :: Find Out Which Character Is Missing (non Installed Font)?

Feb 16, 2011

A client has sent me a docx. Actually it's not the first he's sent and it always causes me some kind of problems. When I open the document (a normal boring 3 page text document) with Open Office some of the characters are replaced with little empty boxes. From context I suspect they are things like slashes and commas - but I don't know for sure.

I copy and pasted some into gedit and there they appeared as boxes with letters and numbers inside like FF04. Is there some way to find out what these symbols are? I don't need to see them or print them, I just need to know if it is a plus sign, back slash, u with umlauts, or whatever.

View 3 Replies View Related

General :: Find Command Give Error File Not Found?

May 27, 2011

find /var/spool/mqueue -group abc -exec rm -rf {} ;Using above command , I delete all the files belong to group abc.Now the problem i face is that the this command gives error that some files are missing . And this error occur because after creating list of files, it pass that list to rm -rf but till that time sendmail process queue and some of files disapper from /var/spool/mqueue.

View 5 Replies View Related

Fedora Installation :: Where To Get The Md5 Checksum To Verify If The Downloaded Iso Correct

Sep 13, 2009

I just downloaded the "Fedora-11-i686-Live-KDE.iso" and "Fedora-11-i686-Live.iso". I want to check if the downloaded files correct or not. I can use a tool to get the md5 sum of the downloaded files. But I want to compare them with the original ones.

View 6 Replies View Related

General :: Unable To Find Which Is Character Encoding Scheme Under /usr/share/X11/locale

Jan 4, 2010

I am trying to do Multi_key composition...But not able to find which is my character encoding scheme under /usr/share/X11/locale/ I have several direcotries under this folder...How can i come to kno which is my character encoding scheme..Any command for this ?

View 1 Replies View Related

Debian :: Jessie Can't Find Correct Screen Resolution

Jan 15, 2016

I'm using two screens where one Is cheep Denver TV screen with DVD player. I have just install Jessie on my PC. Before i had Windows and there was no problems finding correct resolution for this screen. Now Jessie recognize it as Unknown and the maximum resolution I can set is 1024x768 what is way to small even for this screen. At Windows resolution was something over 1200px wide. The worst thing about it is that this resolution stretches the display really ugly. You may think I'm making big deal of nothing but for me it is actually a deal. I'm graphical designer and I need to see display as it is.

View 7 Replies View Related

CentOS 5 :: Apache - Unable To Find The Correct Layout?

Mar 21, 2009

What I really want to do is compile an apache version that uses the same layout as the version included with CentOS. I can not however find the correct layout.conf file. The one from the Apache Source doesn't have a REHL or CentOS option.

View 10 Replies View Related

Fedora Installation :: Cannot Play Media Don't Have The Correct Version Of The Flash Player

Apr 3, 2011

Firefox 3.6.16 I recently installed Fedora 14. I get this message when I browse to some web pages: Code: Cannot play media.You do not have the correct version of the flash player. I have installed the flash-plugin. And has been installed to the following directory;


View 2 Replies View Related

Programming :: Send Epson ESC/P Sequences Through Terminal?

Mar 18, 2011

I want to send Epson ESC sequences to control the printer from terminal.

I figured out if I send


echo $FF>/dev/lp0

that is equal to sending 'FF' control sequence. But I have problem when I need to send sequences like,

1. ESC 0 . I sent

echo $ESC $0>/dev/lp0
echo $"ESC 0">/dev/lp0

. They do not work as expected.

2. ESC HT 5 4 (To control Horizontal Tabbing)

How can it be done in bash?

View 4 Replies View Related

General :: Why Does Sha1sum Act Differently With The Same Input

Jun 22, 2010

I'm trying to replicate the behavior of the sha1sum executable in some java code, however, in the process I've discovered that sha1sum appears to behave differently given the same input in two scenarios.

Assume input of '12345' without the single quotes and with no newline.

If I put this data into a file (file1) and run sha1sum from the command line:

However, if I do this, I get a different result:

Using the apache commons-codec jar, I'm able to read in file1, get it's contents, and perform a .shahex() on the content and get the first result. However, I need to get the second result (due to legacy code) and I can't figure out why sha1sum is behaving differently, or what grep is doing to the input.

The system is running CentOS 5.4 with sha1sum 5.97

View 3 Replies View Related

Programming :: Converting String Sequence Of 1's And 0's Into Their Hexa Sequences

Apr 27, 2011

I have to write a code that converts a sequence of 1's and 0's(block) into their equivalent hexa number and copying to another array(byte). but this sequence is not always of length 8 and you are required to send strlen(sequence)%8 bits back into the string. So i've written down this code and it works well with the sample input but fails in the real program.

int Convert_encode( char * block,unsigned char * byte)
int len,iter,i,j,k,sum;
char * temp=(char *)malloc(4*sizeof(char));


View 7 Replies View Related

General :: Concatenate Two Files With A New Line Character Between Them

Sep 1, 2010

I am trying to concatenate two files with a carriage return.

Iam not sure how we can implement this using .sh script.

For ex:

I tried concatenating using:

I got an output like:

View 4 Replies View Related

Fedora Installation :: Update 15 - Transaction Error - Check That The Correct Key Urls Are Configured For This Repository

Jul 28, 2011

I've been trying to update Fedora 15 for weeks. I always end up with a transaction error and the update stalls. The error reads: GPG keys listed for RPM Fusion for Fedora Rawhide-free repository are installed but they are not correct for this package. Check that the correct key urls are configured for this repository.
This is far too involved for a linux newbie, I think my only option is to reformat and reinstall. This is so frustrating, there are 250 MB of updates available that I can't access.

View 6 Replies View Related

Slackware :: Entry Sequences Affecting Lilo Configuration Tables?

Mar 21, 2011

I am building a minimal 6.2.2 linux kernel with slackware on an AMD athlon +1700 single core box.

In the lilo.conf file, there was originally only one entry, which was created by the slackware cd install.

Now, my questions are:
1.Does a person edit the lilo.conf files before or after they rerun lilo?

2. If that person edits the lilo.conf files before they rerun lilo, does the sequence of the entries in the lilo.conf files affect the manner in which lilo treats the new and old kernels? (e.g. If I put the new minimal kernel build as the first entry, will I get an error message saying that the kernel sizes do not match or that the iso image is too large, or some other strange error message?)

3. Are there any other lilo related problems, options, or tweaks that you think are pretty cool and that I might like to hear about?

4. Would I be better off using GRUB?(I don't like GRUB, but I'm throwing this one in here just for completeness.)

View 6 Replies View Related

Ubuntu Networking :: Computers Connect To The Internet Fine And Can Ping Each Other Cannot Find Settings To Correct?

Aug 8, 2010

I have 2 10.04 computers and one win 7 and one vista computer: The win computers can see each other and the ubuntu computers, but the ubuntu computers cannot see each other or the win machines. The ubuntu computers connect to the internet fine and can ping each other. I cannot find settings to correct.

View 3 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved