Fedora Installation :: Ata Softreset Failed, Can't Install?
Jun 10, 2009
I'm trying to install Fedora 11 but I can't get the live cd to start.After I pick "Default" or the "Live cd" option, I get an:Quote:
ata2 softreset failed ...
ata3 softreset failed ...
I used to have that error on Ubuntu, after adding a second HDD, but that still booted without problems after the error.I also installed OpenSuse on this pc, and didn't get that error.Windows 7 is also on this pc, again without any problem.--Are there any workarounds for this error, so I can get Fedora 11 installed?Note: I'm trying to install from a USB disk, created by Unetbootin.
View 3 Replies
ADVERTISEMENT
Sep 9, 2010
Recently did an apt update and upgrade to my CLI only Lenny server. Upon reboot I get an "ATA softreset failed (device not ready)" for all of my SATA drives. I noticed the upgrade changed the kernel to "Linux debian 2.6.26-2-amd64" (do have 64bit CPU).Once loaded to a command prompt I can assemble my raid 6 array with the command "mdadm --assemble /dev/sda to sdd" then mount it with mount -a. But transfers to the array areorribly slow ~1mbs.Upon reboot i get the same errors and have to assemble my array every time
View 1 Replies
View Related
Dec 15, 2010
I am not sure how to simply explain my dilemma/what I am trying to do, so here is a breakdown: My ComputerIn my computer, I have an ASUS M4A78L-M motherboard which has the problematic "AMD SB710" south bridge. I have an AMD Athlon II X3 440 processor, and I unlocked it to a Phenom II X4 B40, and over clocked it to 3.55 GHZ, and it is fully stable (Best $75 bucks I've spent). I have 3 hard drives, one is a Sata drive made by a company called excelstor technologies and is 250GB (Here is the OEMs data sheet: [URL].... I have XP and 7-64bit installed with the windows boot loader on that. I have a 120GB Toshiba IDE hard drive from a laptop, and an IDE to SATA converter, and it is mounted with brackets internally, and this is only used for storage.
Lastly, I have a 1 TB Seagate drive that I use for Ubuntu 10.04 64-bit, this is my default boot device, and I am using GRUB (not GRUB 2). I also have an Nvidia 9800GT, and 4GB of DDR2-5300 (I chose slow good RAM thats slow, so I can over clock my processor higher). I also have 2 old IDE CD/DVD drives/Burners. My Relationship With UbuntuUbuntu boots and runs fine off a USB Flash Drive, Memory Card, or CD/DVD, but I had a lot of hassle getting it to install. I was never able to boot outside of recovery mode, and when I would start recovery mode, and about 80% of the time I would get a SATA link failure (I thought it was the cheap IDE to SATA adapter, but I disconnected that, and it makes no difference), and my computer would stop booting at that.....
View 2 Replies
View Related
Nov 21, 2010
I have 2 Debian OS's and wanted to put Fedora next to it.
Install went ok, but after rebooting it says: "No root device found. Boot has failed, sleeping forever."
During install from the live CD I didn't "v" the boot (efi or something?) because I thought Grub would take care of everything.
Should I just reinstall again and choose the Fedora bootloader? Won't it mess up Grub?
View 14 Replies
View Related
Aug 17, 2011
I'm new to this system and trying to install plug-ins but I always seem to get some sort of rejection..
[root@localhost haley]# yum install vlc
Loaded plugins: langpacks, presto, refresh-packagekit
[Errno 14] curl#6 - "Couldn't resolve host"
Trying other mirror.
Could not retrieve mirrorlist...^... error was
14: curl#6 - "Couldn't resolve host" .....
Error: Cannot retrieve repository metadata (repomd.xml) for repository: rpmfusion-nonfree. Please verify its path and try again [root@localhost haley]#
So then I checked to see if I had rpmfusion-nonfree, and I do. I really have no idea what to do, I have spent hours trying to get this work. I want to be able to open any media file, avi, wma, mp4, etc.'m using Fedora 15.
View 2 Replies
View Related
Jun 27, 2010
I have configured the remote installation of Fedora 13 with kickstart with nfs installation method. All work ok until I boot the Fedora 13 client system.
Fed13 client system receives the IP address from dhcp, receives the loader, loads vmlinuz and initrd.img from tftp, load anaconda, configures the network and dev eth0, mounts nfs server to load kickstart file, loads kickstart file (language...) but when it tries to mount nfs server to install from Fedora 13 installation tree it fails.
First, I thought that I had an error on my NFS configuration but I was wrong. I opened tty with ALT+F4 on the Fedora 13 client and I sew this error:
Code:
Is this a bug or can I modify anything to correct this error? How?
View 3 Replies
View Related
Mar 29, 2010
I am trying to install Fedora 12 using the x86-64 DVD. My problem is everytime I try to install with the normal settings or basic video deriver setting it says "X failed to load" and so Anaconda never loads. How do i fix this problem. I have an Nvidia 7800GTX.
View 1 Replies
View Related
May 20, 2010
I've been using Ubuntu since 6.04, not a linux guru by any means but can usually get myself out of trouble.
So, the issue... I installed 8.04 on my mother's laptop some time back as she was having trouble keeping Win 2000 running (she has a low spec no-name generic laptop btw). I live in Autsralia and she in England, i thought i could better support her if she was running Ubuntu... All has been well with 8.04 but with the new LTS release (10.04) i thought i'd talk her through the upgrade... Did the online upgrade via Update Manager, all seemed to go OK but when she went to log on after restart she got an error saying 'authentication failed' even though we are 100% sure we have the user name and password correct... Tried to do a ctrl+alt+F1 to by pass the GUI log on but couldn't get the terminal session to open up, just got a black screen - no command prompt.
So... thought OK re-install... downloaded the ISO, burned and sent her a CD in the post... talked her through the re-install, all seemed to go well (again) - BUT, after restart, couldn't log in "authentication failed" again...
So, remember i'm trying to talk a novice through all this... any thoughts!?!
If i can get her to log in i can then support her via some kind of remote sesion or other screen share... and it wont cost me a small fortune in international calls!!! But if i can't get a log in, i'm dead in the water!?
View 1 Replies
View Related
Nov 11, 2010
I was trying to install a RAR extractor called Peazip (http://peazip.sourceforge.net/) I selected the 64-bit package (I run Lucid) and went for it. Everything extracted ok, and the package met all requirements. However, during the installation process, it hung. No movement. I closed out of the installation, and restarted, to attempt a second try.
Now, when I try to install anything:
Code:
(Only been running this OS for, oh, what, a week? And I already hosed it up! )
View 3 Replies
View Related
Jun 5, 2010
I ve succesfully installed 11.2 on my desktop using Gnome (I kept 11.1 on my system) Ive tried to install the KDE using Yast (within Gnome) but halfway the connection failed, after continuing the download the KDE does not have a menubar and I cannot do anything. I only have the KDE splashscreen.
Now (frome gnome) I would like to de/re-install the KDE but I cannot find What i should remove in yast, there is no KDEdesktop option to remove. How can I reinstall the KDE
View 3 Replies
View Related
Jun 5, 2010
I tried installing the 32 bit version of ubuntu 10.04 on his machine. I gave him 5 gigs of swap and 3 gigs in boot. It worked fine for two days and on the third day he tried to boot up his machine and got the message "primary drive 1 not found, secondary drive 1 not found" and the boot loader never appeared. He waited for a while and eventually the ubuntu splash screen appeared with five red dots, and after a moment of that the screen went totally dark. After "a very long time" (in his words) the desktop appeared but his desktop toolbars never appeared. The one folder on his desktop did appear. He "couldn't do anything" and eventually shut it down.
View 2 Replies
View Related
Mar 15, 2010
When I was trying to install debian stable in my laptop the process was freeze, I would like to know what was the problem, this is very important for me because the failed would be in a working server or on a project, so my questions are:
1. What are the places/files to look for errors? log files? dmesg? something else?
2. Are there some special commands or routines that can help in the analysis?
View 3 Replies
View Related
Jun 3, 2010
I wanted to install it on a secondary computer in my house for web browsing and little-to-nothing more.
How can I fix or get around the error 'Authentication failed' when attempting to login?
I just installed openSUSE. The installation seemed to go well. After installation, everything loaded up and I was using the OS with no problems.
I restarted the computer to change my boot sequence in the BIOS. Then I got to the openSUSE login screen. I was presented with three options:
1. my username - When I enter in the password I specified during the OS installation it says "Authentication failure"
2. Automatic Login - just says "Permission denied"
3. Other... - Nothing seems to work here
How can I login?
View 8 Replies
View Related
Feb 14, 2010
I have repeatedly installed from CD & each time after reboot, I get an error..
afbe47d-19bo-416f-adaa-d1b1255ecfaa
I do not have knowledge of ubuntu Nvidia drivers etc. because my previous installations (ie. 9.04) worked OK. I do not have a dual boot HDD, just a clean install.
By the way, I can upgrade from 9.04 to 9.10 using the add/remove thing & everything works.
View 7 Replies
View Related
Apr 30, 2010
I installed 9.10 on a Vista 64-bit PC with AMD64 dual core. I have 3 hard drives. 1 x partitioned in to 2 for Vista and its appluications on the other partition. I have another hard drive partitioned with one for documents and the other for Ubuntu OS. The 3rd hard drive was for future backup....
I started to install Ubuntu 10.4 with the Update Manager. It got to the stage where it had just finished downloading the new files.when suddenly, I assume as it started the install, all hell broke loose and it crashed. At first I could restart the machine and could see I had lost system info: there were no "SHUT DOWN", "Network" and other buttons and notifcation tablets on the ribbon. The Update Manage was missing bits too.
It did suggest "re try" but that would not work. I then tried Symnaptics and did a "fix broken items". It found over 90, but could not install them. Then it stopped working all together. I can not gain access. It did break Vista too but I managed to get that up and running again, but I have files on the desktop, the Evolution eMail has vast amounts of stuff and I would like to keep the settings in Firefox.. I have tried using the 9.10 CD to fix but if I go in as "trial" and use the update manager or Synaptics it can not complete the install, it says out of memory.
I am happy to reload the OS, either one, but how do I do it without destroying my valuable data..I have two machines I have been working on and neither have worked! See other thread.
View 9 Replies
View Related
Oct 12, 2010
I downloaded and burned the iso at 12x speed and configured the BIOS so that the computer would boot from a CD. I ran the Live CD and everything seemed to be fine until i was informed that the installation had failed because of problems with my hard drive. But worst was to come when i reconfigured the BIOS so as to boot from the hard drive and all i got was a completely blank screen. I don't have a Ubuntu 10.04 Live cd handy so i have to use a different distro's live cd just to get on line.
View 9 Replies
View Related
Aug 6, 2011
I downloaded the 32-bit iso from the Ubuntu website. I followed all of the instruction given on [url]. I went into my BIOS settings and set it to boot from the USB. A black screen came up and first showed me a line of copyright information. On the next line it said "Boot failed: please change disks and press a key to continue". Then on the third line it repeated the same thing "Boot failed: please change disks and press a key to continue".
I'm using a Dell Latitude D610 laptop with Windows XP Media Center Edition Version 2002 Service Pack 2. The USB I'm using is eight gigabytes, was manufactured by Toshiba, and has absolutely nothing on it except for the stuff that needs to be on there to install Ubuntu.
View 9 Replies
View Related
Apr 20, 2015
I've been tooling around in linux on and off since I discovered KNOPPIX 3.2. No linux distro has ever been a daily driver for me, though I wish sometimes it were.I've tried many distros over the past couple weeks via virtualBox on my mac and decided to install Debian on my laptop. I've tried multiple times and it has always failed; quite disappointing.
Laptop Specs;
HP Pavilion dv7 3169wm
64 bit AMD Turion II Ultra M620 2.50 GHz Dual-core
I started the install via the live ISO as the netinst & the DVD versions both failed, either by no suitable kernel or just flat out "installing base system failed". I've now found my computer to boot past the POST splash screen , and then to a black screen with a line cursor blinking with no input/output ability.To be clear, I did use uNetBootin to create the USB, and have successfully installed, and used multiple other distros (ubuntuMate, mint, peppermint, Arch, elementary) without issue, or at least nothing I couldn't fix.
How can I get past this and attempt to install Debian? I'd put my linux knowledge at a "beginner" stat, but I'm by no means daft about electronics and computers.
View 9 Replies
View Related
Nov 18, 2015
I just recently downloaded debian 8.2 live cd 64bit amd and wrote it to a usb stick with the universal usb installer from [URL] ..... The installer stops at the point of grabbing information from CD (right after choosing location) and since I have no dvd drive installed it spits an error out at me.
Now it seems to load the files right with the install icon from within the live mode but it gets cut off so I can't see about 1/3 the screens info. 4k monitor problems?
A bit of info, Installing on a Asus Maximus VIII Hero motherboard with ddr4, i7 6700k, win10 installed.
I'm rather new to UEFI bios options coming from a 2009/2010 x58 board, so I have a bit more reading to do.
Where to get working debian file that allows installation from the main initial boot menu.
View 1 Replies
View Related
Jul 15, 2010
Here is the message I get every time I try to install Debian Squeeze on my computer: Image at: [URL] I have tried multiple cd's and multiple iso's (and the iso's where all different) and the installation always fails at the same place. Here are my specs: Hardware Overview:
Model Name:Power Mac G5
Model Identifier:PowerMac7,3
Processor Name:PowerPC G5 (3.0)
Processor Speed:2 GHz
Number Of CPUs:2
L2 Cache (per CPU):512 KB
Memory:1.5 GB
Bus Speed:1 GHz
Boot ROM Version:5.2.4f1
View 11 Replies
View Related
Mar 23, 2010
I installed OpenSuSE 11.2 64bit from a Linux Magazine #111 dvd and now cannot create DomU guests. The exact error is in the subject line. It is sitting on a software RAID-1 partionion on two (mirrored) hard disks. When I first install - formatting all partitions - it reports error 17 and won't load the OS. After running the Repair installed system from the DVD I get the impression it is doing things twice rather than doing the repairs once on the RAIDed partition. Should I go back to 11.1?
View 4 Replies
View Related
Jun 2, 2010
I have tried to install openSuse several times and the same problem would persistRight after installation, when the prompt to log in shows up, I enter a username and a password, but it says that login failed. I am sure I type in the correct data as I have written down the username and the password I register during the installation.Also, after the installation finishes, the computer restarts automatically, though instead of restarting it goes into a mode similar to stand by. The screen is blank and the media buttons of the keyboard are lit, but nothing happens, so I just restart manually. Could this have something to do with it
View 2 Replies
View Related
Mar 22, 2011
I can't install 11.4. First install freeze when loading basic drivers. I set acpi=off and install start but freeze during setting.I think also that 11.4 was not mature.I have a Asus P7P55 MB with Intel Core i5 CPU 750 8Go RAM and Nvidia GT200 GPU.No problem with 11.2 except sound.
View 5 Replies
View Related
Feb 1, 2010
I cannot boot into either OS. Grub failed on install. How to boot back in to windows. From live Ubuntu CD I can see that all files are there, however it shows the disk to be unrecognized and unallocated. There is an X by the root folder of my C; drive. Windows recovery console can't fix it, windows install can't fix it, and windows repair can't fix it. I guess I need to reconfigure my boot drive properties to recognize the ntfs; I don't know what to do. I would like to boot back in to windows partition the drive correctly and start over , is this possible?
View 1 Replies
View Related
Feb 2, 2010
Does 9.1 server require a 64 bit processor? When I try to install it I get the message."This Kernel requires an X86-64...."
View 2 Replies
View Related
May 17, 2010
I just did a new install of Ubuntu 10.04 (64 bit) on a system with multiple older versions of Ubuntu already installed. There was a dpkg error during the install with no useful information provided, otherwise the install completed normally. When I rebooted, the old grub2 ran and presented my old boot menu. When I mounted the 10.04 partition to see what was there, I found that /boot/grub/ was empty and /boot/initrd.img was missing. The other boot files were present.
View 2 Replies
View Related
Jun 14, 2010
I have installed Lucid 10.04 server on an IBM eserver 325 dual boot with 2003. the cd rom drive on the server is starting to go out and the install worked but failed to install key applications and files. For examle- no VIM (just VI) and the apt sources.list file had one entry- the cd rom. I need to update all the packages necessary for the system to operate fully. ( I have tons of broken dependencies when trying to install SSHserver, Samba and other apps) I manually entered the muliverse and universe repositories in sources.list but this is not resolving the issues with the missing dependencies. I can get a new cd-rom drive but it will certainly take a week or two to get and I need to get this project going. I have some experience with Linux, but not enough to know if there is a magic command that I don't know.
View 2 Replies
View Related
Jul 2, 2010
HDD with four partitions: Three DOS bootable primary partitions are located in the head, and the residual extended partition is divided into several logical drives.
1st trial: 10.04 installer recognized the last largest logical drive for system installation, but installer truncated the extended partition, and created the "terrible" 5th primary partition at the end of the HDD. GParted and other utilities cannot access to this 5th primary partition. (So, I restored the lost partition table on the HDD manually by MBM. But several OS were broken.)
2nd trial: To avoid making this "terrible" 5th primary partition, I located the largest logical drive for installation at not of the end.10.04 installer recognized this logical drive, but failed again.I tried GParted. but also failed to formating to ext4.Maybe, 10.04 installer failed at this formating step. Logical drives are not supported in 10.04 ?
View 9 Replies
View Related
Aug 10, 2010
I'm trying to run (INVedit, for the Minecraft Alpha) needs fm20 installed to work. So going through the winetricks motions, I have it run, but the install program says "Microsoft ActiveX Control Pad Setup was not completed successfully."
However, this is the output from "sh winetricks fm20" code...
View 2 Replies
View Related
Sep 6, 2010
10.04 new isnstall from cd goes for a minute then I get this error message:
old p3 800 machine, will this distro work on an old machine like this:
BusyBox v1.13.3(Ubuntu 1:1.113.3-1ubuntu11) built-in shell(ash)
Enter "help for a list of built-in commands.
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: input/o-put error
Cannot mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
(initramfs)
View 1 Replies
View Related
