Having just installed fc13 and downloaded the KDE package I attempted to log out as user and back in as root, but I keep getting a message about the wrong password. This is odd as the same password works in terminal if I try to become a SuperUser. I have tried turning off SELinux to no avail. I cannot log in from cold as root,only as user.
View 1 RepliesI am running FC13 on a fairly old PC (PIII 500MHz, 384MB RAM, 10GB SCSI disk). It works fine using kernel 2.6.33.5-112.fc13.i686.PAE. After a series of recent updates the system now also has a new kernel 2.6.34.7-56.fc13.i686.PAE.
/boot/conf/grub.conf contains:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,0)
code....
When I try and boot to the newer kernel I get an error like:
Kernel panic - not syncing VFS Unable to mount root fs on unknown block(0,0)
I read on the forum about a similar problem where the fix was to insert the line
initrd /initramfs-2.6.34.7-56.fc13.i686.PAE.img
but this file doesn't exist and so the boot then hangs with no messages, so I took this line out again. Here is contents of /boot:
$ ls -l
total 21148
-rw-r--r--. 1 root root 111391 May 27 04:06 config-2.6.33.5-112.fc13.i686.PAE
-rw-r--r--. 1 root root 112291 Sep 15 04:32 config-2.6.34.7-56.fc13.i686.PAE
drwxr-xr-x. 3 root root 1024 Jan 23 2010 efi
code....
As you may deduce from the above I haven't used the system much so the auto-update hasn't run for several months.
Any help on running / installing the newer kernel appreciated. Note that I am trying to install a wireless LAN card and am following instructions here: url
I got as far as
cd /lib/modules/`uname -r`
ls -l
which gave:
[root@localhost 2.6.33.5-112.fc13.i686.PAE]# ls -l
total 3300
lrwxrwxrwx. 1 root root 51 Jun 3 00:52 build -> ../../../usr/src/kernels/2.6.33.5-112.fc13.i686.PAE
drwxr-xr-x. 2 root root 4096 May 27 04:08 extra
drwxr-xr-x. 11 root root 4096 Jun 3 00:52 kernel
code.....
so I have the src files for the newer kernel not the one I am running. I thought it best to stop and think (and ask for help!) rather than break a working machine (but with no wireless LAN!)
I am unable to login to kde after upgrade to fc14 from fc13 as user , the splash screen works for seconds and returns back to login screen, but I am able to do as root
I also managed to login to KDE (failsafe session)
and also I am able to login as normal user to gnome desktop
Figured out a straight shot at connecting to the Internet in Fedora 15. Follow these commands.
1.)****** SWITCH TO ROOT USER if you don't have privileges*******
2.) cd /etc/sysconfig/network-scripts
3.) rm ifcfg-XXXXX (DO NOT REMOVE THE IFCFG-LO)
4.) system-config-network
-> Once in this screen, press the enter key on "Device configuration"
-> Configure your network statically. ( I did the following.) Name: leave as default Device: Leave as default DESELECT "Use DHCP" Set Static IP as 192.168.2.117 (or 192.168.1.117) Set NetMask as 255.255.255.0 Set "Default Gateway IP" AND "Primary DNS Server" to 192.168.2.1 (or 192.168.1.1)
[Code]..
Now, all of a sudden, after I restarted after a system update, My dell desktop inspiron hangs on boot. The kernel is: 2.6.34.8-68.fc13.i686. Not only that, but the system won't boot for any of the remaining previous kernels.
View 6 Replies View RelatedI'm running Ubuntu Lucid formatted ext3. It boots with Grub (old Grub) in sdb6 (hd1,5) It mounts at /, and its partition, sdb6. is flagged boot.
I created a new partition for Fedora 13, 64bit. I installed Fedora in sdb8 (hd1,7), formatted ext4, and created a separate /home in sdb7, formatted ext3, so I might share it with Ubuntu, in sdb6.
Fedora installed with Grub2. It booted fine, and after adjusting references in fstab Ubuntu booted OK too, but rather roughly.
That is when I shifted the boot flag to the Ubuntu partition. So now the original Ubuntu Grub is handling boot once again. Ubuntu boots as before, but I can't get Ubuntu's Grub to boot Fedora. An earlier post suggested this code, which generated error 13, Invalid or inappropriate executable:
Code:
I tried the following code, pasted from the Fedora Grub, but it doesn't work either:
Code:
I've got alternative lines invoking the kernel, because someone had suggested omitting the direct reference to root= ....
Either way I get error 2 - Bad File or directory.
I suspect the problem may be that I'm booting Grub in an ext3 partition and trying to invoke Fedora in an ext4 partition. Does anyone know if that is the likely cause of my problem? If so I can reinstall Fedora formatted ext3.
Alternatively, can I create a Fedora /boot partition, and move/reinstall Grub there? Either way -- should I use old Grub, so both Grubs are the same?
Should I have assigned mount points to sdb8 (Fedora) and sdb7 (home)? Currently I'm not using sdb7 at all.
I'll attach a screenshot from GParted of my partitions.
I need to access some things in "documents and settings" folders (my windows xp crashed). I believe I need to be root user in linux to do this. I am running a ubuntu linux live (uninstalled) cd. I am new to linux and I do not know if this is even possible. I want to copy some things from documents and settings folder to an external drive (as backup) but I cannot access them as things are now (linux gives me an error when I try) but I would like to do it in gui so I can physically "see" everything and look through it.
View 9 Replies View RelatedI am running Fedora 13 in VMWare. I tried doing a software update and I get this error message when tring to install the updated kernel:
Test Transaction Errors: installing package kernel-PAE-2.6.33.6-147.fc13.i686 needs 6MB on the /boot filesystem
how to increase the memory space required for installation.
I have just upgraded my FC12 installation to FC13. The initial boot failed (just blank screen). Second time I received 'selinux targeted policy relabel is required'. I let that run, but still the boot did not suceed.
I then went in to verbose boot and saw that the boot would hang at libvirtd. So I disabled libvirtd for anything above run level 1. Next boot failed at atd, disabled atd. Next boot failed at 'monthly Smolt checkin'.
At that point and booted in to single user mode and dissabled SELinux, thinking that was the cause of all the problems. That did not help.
The update process has also removed my previous kernels, so I can't test a different kernel
After upgrading FEdora 13, user ravi was added. Then after few days neel was added. Both of the users were already existing. So when attempting login to neel, we found that every file is owned by ravi. So we did$chown -R neel:neel But after that problem started and when we rebooted the machin, there were no list of users on login screen. (then I connected to that comp remotely, it worked, but somehow I was not able to switch to root) It says incorrect password (though I new it very well). So I went to maintenance mode and changed the root password, and rebooted. Still problem persists.Now I am not able to login as root (from anywhere, login screen , terminal, remote)No list of usernames on login screen ( but i can choose, other and type login-password)
View 5 Replies View RelatedI have just upgraded my laptop from F8 to F10, and I am unable to login to the system as root user.At login, it provides 2 options, one is the user I created and another called 'other'.On selecting 'other' and providing uid/passwd as 'root/<rootpassword>, it says "Unable to Authenticate User"!!However, when I tried to access my windows partition, it happily accepted the root password
View 4 Replies View RelatedI've been trying to make my FC13 Dell d620 work with a Huawei 3G usb modem mode E173. I can not switch the device to modem instead of storage with usb_modswitch. This is what I get on lsusb:
[Code].....
I'm trying to get the "root" user to be included in the list of users that get displayed on the login page.
I found this:[URL]...which seems to indicate that if I add an "Include" line, with the "root" user, that would work. I found the /etc/gdm/custom.conf file, which was empty except for the section header lines, so I added an "Include=root" line, but even after rebooting I just get the regular users, and have to login by typing the "root" username, etc.
So, I was wondering, is there a way to get this to work? P.S. I understand about not wanting to allow root logins, but I need to do this in my situation.
I was trying to install winbind on a RHEL5 machine and I had to reboot the RHEL machine. When it came back up, I'm not able to log in as root or any other user.When I use root and give a random password, it says invalid username or password but when I use the correct password, I get an Authentication failed pop up box (under GUI). SSh window says invalid password for random passwords and the SSH window disappears when I type in the right password.Can you please let me know if I can somehow get back in by stopping any of the services
View 3 Replies View RelatedHaving installed Debian 7 on an old machine from a Liinux Format Magazine DVD I was unable to log in as a specific user. I can login as root and use useradd etc but when I logout of root I still cannot login as a user and nor will the machine accept my root password. I have to shutdown and reboot to get back into root. I'm using O'Reilly's Linux Pocket Guide from 2004 for the commands. Could it be that things have changed?
View 9 Replies View RelatedI followed the instructions on this page ([URL]) in order to secure my sshd and prevent anyone form accessing the server directly as root. Therefore I changed the "PermitRootLogin yes" to "PermitRootLogin no" and restarted sshd. After that root access was denied directly but for some reason I am unable to switch to root from any of the normal user accounts with "su -" because I keep getting the "Incorrect password" errors. I am sure that the password is correct but for some, to me unclear, reasons I am unable to access the root account over SSH from a normal user account. I also noticed that after that I lost the ability to access the server as root over SFTP. why I am unable to generally use the root account after doing the named changes to sshd_config/ I am running CentOS 5.4 with the newest update.
View 7 Replies View RelatedI have been running FC13 for some time now without any problems on my HP dc5800 Microtower. Recently I ran a software update, and when I rebooted the machine I got a blank screen with only a blinking underscore in the upper-left corner. Rebooted several times to no avail. I thought perhaps I had made a mistake, so I just reinstalled. I have tried reinstalling several times now with both 32-bit and 64-bit FC13, each time with the same result: everything works fine up until I install software updates; then after the next reboot I get a blank screen with the blinking underscore. I see the POST screen, and then it just goes blank. It doesn't seem to respond to any keyboard/mouse input; I eventually have to hold down the power button to make it power off.
View 5 Replies View RelatedI have a Red Hat 4 server with Sungard Luminis installed on it. I was following some instructions on setting up Luminis to start at boot. One of the steps was modifying the sudoers file. Since modifying the sudores file, I am no longer able to "su" to root when logged in as a normal user. When doing so, I get su: incorrect password after putting in the password. I have another server with the exact same setup, broken one is test, the other is production, that works just fine. I made no changes to my production server. I've been looking at different things all day and the only difference I have found between the two are the results I get from running rpm -q --verify coreutils. Running that on my prodution server returns nothing. Results from my test server are below. Is this what is causing my problems? If so, what's the fix? I haven't found that yet. I've checked /etc/pam.d/su, both servers are the same.
rpm -q --verify coreutils
.....UG.. /bin/basename
.....UG.. /bin/cat
.....UG.. /bin/chgrp
[Code].....
I'm a bit of a Linux novice but have taken the plunge and got a old Dell machine set up with Fedora 13, it works fine for the most part. If I can get it to boot. Whenever I start it up the tri-color boot bars go across the screen but seem to freeze at various times. Sometimes right as its getting started, other times it will go all the way across but never actually do anything. I can sometimes get it to work if I get into GRUB and try a different kernel version. Is there anyway to pull up a more informative boot screen or some other way of figuring out whats causing the freeze instead of just watching the progress bar?
View 5 Replies View RelatedPerformed the daily update, don't recall which packages were available, and the boot process freezes near the end upon trying to start my VNC server. Using rescue disk removed tiger-vnc server. Oddly upon reboot, selinux reset the files even though initial setting was 'permissive'. have not tried re-installed vnc yet.
View 3 Replies View RelatedThis is my 6th install of Fedora, begining with Fedora 4 I have had very good luck with all until 9 and I lost all data on drive by my bad clicks in a frustrated session. Now I have a great install of Fedora 10 with the exception that I fouled up and typed in a user (myself-'andybill') and am finding out that the work I need to do cannot be maximized by operating in user - andybill, I need to be super user. I have just moved and have not done any collaboration with our senior partner in a data development start up that he is the intellectual property in deed and law. For me to get back on track my using this OS I have to be master of all libraries, drivers etc. I am a nu-b (only 2 1/2 years, with no computer science background. This explains why I need step by step commands without abbriviated lingo-So if I can remove myself as andybill, make all root
View 13 Replies View RelatedCode:
# cat /etc/init/tty.conf
# This service maintains a getty on the sepcified device.
stop on runlevel [016]
respawn
instance $TTY
exec /sbin/mingetty $TTY
exec /sbin/mingetty --autologin user tty1
when i use this conf I'm auto logged back in again , and cant't execute any command
commenting pre-last line has no effect.
How to enable autologin on desired tty for certain user?
In FC13, when one user logs into GNOME and locks the screen, there is a "switch user" button so someone else can return to the log in screen and log in as well. But in KDE, there is only two buttons "Unlock" (for the current user) and "Cancel"
View 7 Replies View RelatedAn a stable FC13 system, after resolving deps and downloading rpms, 'yum update' aborts with this single error message:Transaction Check Error:installing package kernel-PAE-2.6.33.5-124.fc13.i686 needs 801KB on the /boot filesystem.Silly thing is, I have at least 52MB available on /boot.An important datapoint is that I resized the boot partition since the initial install from 64MB to 128MB, which makes me think perhaps yum or anaconda recorded the original partition size, and is not looking at the current (correct) size of /boot.
View 2 Replies View RelatedCode:
$ su -c 'yum install wine'
this forum won't let me put all the text in Transaction Check Error: package openldap-2.4.21-6.fc13.x86_64 (which is newer than openldap-2.4.21-4.fc13.i686) is already installed package nss-softokn-freebl-3.12.4-19.fc13.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed
I am not able to run nautilus as a root userA error message saying - Could not parse arguments. Cannot open displayHow do i find which version is my gnome??
View 3 Replies View RelatedI am trying to someone get to their records on a CentOS 5 box and the username/passwords they have given me are not being recognized.
View 11 Replies View RelatedI've installed F12 twice now. After completing the installation and getting all the updates via YumEx, my network trouble begin after a reboot. I am not able to login as root under gnome so I can't see the services panel.
Tried to reinstall 'NetworkManager' after the fact but of course I have no network connections so I may have made the problem worse. I hate to reinstall and repeat the same troubles over again as it consumes a lot of time. I don't know where to begin.
As everyone knows, the graphic user can be swithed with Ctrl+Alt+F7 (or F1 in Fedora). There are also a few text mode consoles - Ctrl+Alt+F2...F6.
Fortunately, there is a Switch User button when the screen is locked from Gnome with the default screensaver.
The question is how can a new graphical user be switched from console (Ctrl+Alt+F2...F6) if the screen is locked by some other screensaver which does not have this function?
without realising I started thunderbird from a root window, I set it up along with rules and about 2 hours finetuning.
I figured out how to get the icon on the top panel, but that is naturally started as my user gsm.
Is there an easy way of migrating the whole mailbox and subfolders form the root install to the gsm user?
Or is it easier to start from scratch?