Ubuntu Installation :: Win7 Partition Resizing To Free Up Space
Feb 26, 2011
Some months ago I decided to give a chance to this 'Linux thing'. However, being uncertain of the usefulness and friendliness of it all, I decided to keep my Windows 7 partition untouched and just make a 30 Gb partition to "try out" Linux. As it turns out, it's been some 2 months since I last booted Windows and was now wondering if there's a way to "steal" some space from that W7 partition and add it to my Ubuntu one without messing up files. Some kind of major defragmentation, leaving an empty part of the disk which I could "attach" to my Ubuntu partition. I am using Ubuntu 10.04 LTS version.
I have two 250 GB drives setup with hardware RAID 1. I had on sda and sdb: 20 GB swap, 20 GB /, 198 GB /srv all was good until I started to run out of space on 20 GB /. So I booted the server with Suse 11.3 live cd and reduced the size of 20 GB swap to 10 GB and 198 GB /srv to 150 GB on sda and sdb.
All good so far, then tried to increase 20 GB / to 60 GB, but the Partition setup says the Max Size can be 20 GB, I have checked and I have 42.88 GB of Unpartitioned space. I have rescanned, rebooted, Server is still running fine by the way, but the 42.88 GB of free space is not made available for the expansion of 20 GB /.
I have decided that my partition table does not meet my needs Barrymore, and I want to shrink the "/" partition by 80GB, and then create another file system on that space. I did some research on-line, and I'm not sure which way is the easiest and more secure way to perform the change with out putting the "/" file system on risk.
I have Dell Laptop 1545 which already installed windows 7 home premium which is also having two partitions one is reserved by the oem and another is for recovery partition and another 200gb i am using for windows 7 now i have left only 80gb hard disk. So I started to install the Fedora 12 in my laptop every thing is going fine but
at the time of creating the partitions iam unable to allocate the partitions the left 80gb i tried to select and tried for custom partition but to my surprise it is giving the following message "Could not allocate requested partitions: not enough free space on disks"
My root partition was filling up, with only 500 mbs left, I wanted to resize my root partition from 20 Gb to 40Gb
So I resized my partition by using these steps:
Using Gparted to resize another partition to give space for the EXT4 Using fdisk, deleting the root partition (on /dev/sda2), and creating it again using the new size resize2fs /dev/sda2 Updating grub2
But now the problem is that although I can boot in my new partition and the new partition shows it is 40Gb, but the free size was still 500mb. So I booted from a LiveCD and checked with e2fsck -p /dev/sda2, it reported clean. So I added the -f flag (force check), still, the drive is full.
Today I was messing around with my partitions, and I decided to shrink my main partition that had Windows on it, so that I would could have one big storage partition and then a Windows 7 one and a Ubuntu one. Well, it didn't really work so I decided just to wait for Lucid to come out and start with a fresh install. So I went into EASEUS Partition Manager and resized my main Windows 7 partition back to its normal size. It had to reboot and did its stuff, and then when I restarted my computer, grub was showing the grub rescue> thing. So I went into the Windows 7 recovery disk, and tried all the BootRec.exe options. None of those worked. So I decided to go to the extreme and just delete Ubuntu completely.
I deleted the entire partition with GParted and then resized the main partition all the way. Then I booted into a Ubuntu live usb and re-installed Ubuntu. I thought it would just reinstall Grub and I would be able to get to both Ubuntu and Windows 7. It did install Grub, but now I can only boot into Ubuntu. It's really weird, because I can boot into windows, it just says starting windows and does the loading thing. And then EASEUS Partition Manager comes and says that all resize operations were complete successfully(because I hadn't booted into windows since I resized stuff with it) and then the screen just stays black for a long time. I don't know what to do. If I wait long enough, my computer just reboots...
I have a notebook with dual boot windows and Ubuntu 10.10 on a 80 Gig hard drive. The windows XP partition was initially installed and took up the whole drive (dev/sda1). I then freed up some space and created and installed Ubuntu (/dev/sda6) and swap (/dev/sda5) on an extended partition (/dev/sda2). Initially I only freed up 3.6 Gig which I thought would be more than enough but not any more. I cannot even install the updates as there is only 100 Meg left which is not enough. I then freed up more space (8 gig) from the windows partition to allocate to Ubuntu.
My problem is that I can't seem to find to now allocate this "freed-up" space to Ubuntu? I realise that I have to boot-up from a the Ubuntu live disk so that the hard drive is not mounted to allow changes but I'm still unable to change the partitions. I'm using GParted. The drive looks like this currently: [...NTFS] [...Unallocated] [...Extended{(ext4),(linux-swap)}]
I'm a new user to Linux & Ubuntu. My system is Windows 7 in one partition, one partition has free space to load my data, another partition is present to load Ubuntu. Can somebody please tell me how to go about the installation process when I'm already having an OS preinstalled?
I had installed Ubuntu 10.10 on a W7 OS, as a dual boot. I have removed Ubuntu, and now have that space as "free space". Between the original partition (c:) and the free space, there is a partition that contains the laptop mfg's factory image. I want to recover that free space back to the original c: partition. I was reading about GParted, but do not want to attempt anything until I have some expert advice.
I now have Windows XP installed, with 30GB of free space on the end of my hard rive. If I install linux there, will it cause Windows XP to fail? Last time I tried this, it says hal.dll was not found. However, that may have been caused by having five partitions. Do u think its safe now that I'll only have 4? Will Windows XP fail if I put in a partition in the free space?
Why does it says I'm using Safari in Windows, I'm using Google Chrome
I just downloaded the new fedora and proceed to install it into a free space of 11GB on my HDD. As such the partitioner is unable to create more than 1 partitioneven if free space is available, it reports not enough free space seen if its present. As such it can create only one of the three partitions i.e., swap or / or /home duw to which cannot proceed ahead.' Some more details me running Xp as the other OS on my system.
I have just over 20GB of empty space on C:. When I click it under disk-management, the window comes up and says I can only resize it 192 MB less than what it is. But I have 20GB free. Any ideas on what is wrong? I also have this odd 9.56GB partition that is empty. DM says it's "EISA configuration"...whatever that is. I am planning to allocate about 10GB for F11 if this pans out ok.
I have 10 GB drive with win98SE taking 2 GB and 9.04 taking 2.3 GB, then the rest is unallocated space. I am trying to use upgrade manager in 9.04 to upgrade to 9.10 (I have 9.10 CD but it fails to install - tried to download it several times. I know upgrade manager solution works in principle, but upgrading to 9.10 says it needs another 1GB of space.
I have used 9.04 live disc to start GParted but there seems no way to resize the 9.04 partition to use the unallocated space - can only resize it down. Making the unallocated space a partition does not seem to help. How can I go from here to make enough space to upgrade to 9.10 and keep Win 98
I have around 30gb of free space in my partition table immediately before the Linux partition. I want to resize my linux partition to take up this space.
I tried booting with live cd, sucessfully umounted the hard drive but found I could not resize the partition. On clicking the 'edit size' button, partition manager recognised the free space before the partition but when i reduced this, the 'ok' button was greyed out. (it was not greyed out for the windows partition so I could, in theory, increase the windows partition to take up the free space but this is not what i wanted to do).
I am pretty sure that I had managed to unmount the drive correctly as the padlock symbol had dissapeared (I took the attached screenshot, which does show the lock symbol, after rebooting into my normal system).
Anyone got any ideas as to why it wont allow this? There is no reason why i can resize the partition to take up the free space BEFORE it is there?
I tried to just have two partitions (recovery and ubuntu), but because of the different file systems, and the placement of the hp recovery partition, it has to be right in the middle. This is basically what I want to do:
1) Reinstall Hardy Heron on a new (smaller) partition from the free space partition. 2) Once it's working properly, format the rest of the hard drive (getting rid of the recovery partition) and create a single ext3 partition. 3) Install another distro on this new partition.
Does anyone foresee any complications with all this slicing and dicing of my hard drive for which I should/could prepare?
i am following the installation process and its very unclear whether or not a dual boot will occur and how i can make a partition of the free space available from my windows partition etc....i dont want to go through the process and find myself losing all my data and my windows partition i also cant seem to select a partition less than 86% of the total capacity of hdd so im def sure they're not taking my dual boot desires into consideration.
I installed 11.4 (64 bit) and all went amazingly smooth. I created three logical partitions (boot, swap and home in this order) and an extended partition with root and backup. Just prior to the installation, my external backup drive went belly up so I created a 40 gig partition to "fill in" the backup duties until I purchased a new one. I got it and set it up and then deleted the 40 gig backup partition thinking I would just add the now unallocated space to the root partition but alas it was not meant to be. I can't resize the root partition while it's mounted and I can't unmount it and have a working system. The 40 gigs of space is sitting right next to root (no having to jump or resize other partitions to combine the two). Is there a way to do this or did I just waste 40 gigs worth of real estate.
My debian 5 is up and running smoothly and act as file-server in the middle of windows network jungle using samba the only problem is, after backup an external hdd (213 GB) to my /home partition, I end up with message say that I'm running out free space. Fyi my debian installed on 1TB SATA disk, and I separate my /home partition from system what happen to my free space ? here is screenshot of my disk, using disk usage analyzer: is there is a way to get my space back or something missing on my setup.or I have to reinstall my debian and use LVM when partitioning my disk?
I have 1 HD with the following OSes, each on his own partition:
p1 WinXP p2 Win7 p3 Ubuntu p4 Ubuntu Studio p5 Unallocated (not actually a partition)
I intended to create a 5th partition, formatted as NTFS, for data. That's when I found out that Windows only supports 4 partitions per disk (yeah, I know, should've looked it up first). On Win7 Disk Management applet, they're all listed as "Primary Partition".
I've come up with a few possible solutions: s1. Move partitions p3 & p4 down towards the end of the HD, and add half of the available space to partition p2 (Win7) and the other half to partition p4 (Ubuntu Studio).
s2. Move partitions p3 & p4 to the end of the HD, and add all available space to partition p2 (Win7).
s3. Increase partition p4 (Ubuntu Studio) to take up all the available space.
My questions:
q1. Win7 Disk Management applet gives me no option to move or resize (other than shrink) the partitions. Does this mean I'll have to use another partition manager (e.g., gparted)?
q2. If I move the partitions p3 & p4 (both Ubuntu), will there be any impact on grub?
q3. Is there any way to turn partition p4 to extended instead of primary? If so, what are the consequences?
I have 160gb laptop. i installed vista in c primary partition which is 25gb and installed ubuntu in d primary partition which is 20gb. A remainig for my data. Now i tried to install CENT OS by formatting ubuntu. I inserted CENT OS DVD and restarted and i selected to delete my /dev/sda2 which is showing 20480mb and it shown me free space. but i tried to add partion /boot of 100mb it got added. but, when i am trying to add / of 3000mb in the remaining 20380mb free space it showing an error message that no free space is available.
I deleted Win7 from my dual boot but I cannot seem to merge the 160 gig's of free space into my ubuntu partition, ran the live gparted but it will not let me expand the ubuntu partition!
I'm dual booting Win7 with Ubuntu 10... I just 'shrunk' some disk space in my NTFS partition (about 60gb); and want to assign it to my current Linux partition. In the 'disk utility', I see 60gb 'free' and unformatted. How can I take this 60gb and add it to my current Linux partition (/dev/sda5)?
I am trying to install Ubuntu on a computer that will do a dual boot (Windows XP and Ubuntu). My drive is 1.5TB. I have installed WinXP first creating 20GB partition for it. Rest of the drive remained as an unpartitioned space. Now, on top of that I am trying to install Ubuntu. I got as far as the screen that asks me to partition hard drive. What I would like to do is to create the following partitions:
/ - where the system will go (20GB) /swap - well, swap (5GB) /media - for my media files (rest of the HD ~1.4TB)
Unfortunately, I was unable to do so (or it is beyond my noob Linux skills). The only two partition types available were Primary and Logical. When I created two partitions:
/ /media
I got an error that warned me to go back and "rethink" my strategy (do not remember exact error). When I tried auto-partition free space, I got:
/ /swap
but / took the whole remaining 1.5TB of the drive. How do I create the three partitions that I would like to have?
Just installed and started to use the suse11.4 two weeks ago when my Win7 broke down. Now I got a new Win7 recovery disc from my laptop manufacturer, and want to install a Win7 accompanying with the suse11.4.
My question is how to clear up a free space in HD to install win7? Currently, I have 3 partitions that are sda1, sda2 and sda3 with space 2G(swap), 20G(root) and 270G(home) respectively. I want to free up half space from sda3 to install Win7, how to do it without delete the data on it? One weird thing is that my HD totally is 320G, but when I installed SUSE, only 300G was usable and the other 20G is missing until now. The fdisk -l command info. is showed below:
I have Ubuntu 10.10 installed along side of Windows 7 on the same partition. I'm a bit of a noob as I have only recently got serious about using Ubuntu daily. I was wondering how I could go about expanding the space Ubuntu can use seeing as how I don't have it set up as a separate partition.
I screwed up with my Ubuntu Server Grub2 on 9.10. I want to know since I just did a reinstall on top of the old one. Can I eliminate one of them (doesn't matter) and return it to Ubuntu and 7. Now grub shows the new install, win 7 and the old ubuntu's that I had before and they all 3 work. so how can I restore grub in the old ones to a default setting and then eliminate the new one? or just eliminate the old ones? Or should I do what I think is prob what I will have to do and completely reinstall Windows and then put Ubuntu back on?
I'm relatively new to ubuntu. I want to run ubuntu alongside my windows partition. I have shrunk the volume that leaves me 50 gb of free space for ubuntu. Will the system automatically set the system and mount volume sizes? If not can I have some tips on manually using the 50 gb to set it up.
I'd like to wipe free space on a fat 32 partition, momentary by doing
Code:
cat /dev/urandom >garbage
That stops each time the file is 4GB big, as this is the maximum supported filesize for fat32 partitions. So I redo the command, only writing now to "garbage2" or so.Is there any more elegant way to do that? Maybe by script which automatically generates new file names, until the disc is full?
