Fedora Installation :: Grub Did Not Find Third OS
Jun 26, 2011
I have Fedora 15 installed alongside Windows and Debian. The bootloader found Windows without any trouble, but it did not add an entry for the Debian install. os-prober sees both Windows and Debian as follows:
/dev/sda1:Microsoft Windows XP Professional:Windows:chain/dev/sda5ebian GNU/Linux (6.0.1)ebian:linux
Since I'm new to Fedora and lack experience with Grub2, I'm asking for advice here before I go off and try to repair this in some silly way that will make life even more difficult. So...what's the tried-and-true Fedora approach to this?
View 3 Replies
ADVERTISEMENT
Aug 12, 2010
I have a problem that has been vexing me for a week now. I installed Windows XP Media first and then Fedora 12. I did the instalation as simple as I could and let the disk do the work. After installation I rebooted but the windows is not part of the boot up. When I hit the "other" selection a blinking curser shows up and that's it. Now I did goto the Gedit conf. and changed "other" to "Windows" and increased the boot up sec. (hd0,0) is suppose to be for Windows, but no results, (hd2,0) is for Fedora and (hd1,0) is the restore file for Windows. I have tried to see the fdisk, the dev/ directory but don't have a clue how to get there from the terminal.
View 14 Replies
View Related
Jun 12, 2011
I had XP, Debian and F14 installed. Bootloader was the Grub from F14.
I installed F15 from DVD overwriting F14. In the new grub.conf I added:
Quote:
title Windows XP
rootnoverify (hd0,0)
makeactive
chainloader +1
title Debian
[Code].....
View 4 Replies
View Related
Jun 10, 2009
I successfully installed Fedora 11 from the DVD iso. At the end, the installation program prompts me to reboot the system. But when the boot loader appears after rebooting, there are only the old entries.
I have 2 IDE disks and one sata disk. The first IDE disk is hd0, the second IDE is hd1. The SATA disk is hd2. In the setup, I selected hd0 to install grub. Fedora 11 was installed on the SATA disk (hd2).[edit] I forgot to say, that Fedora 10 is on /dev/sda and Fedora 9 on /dev/sdb
View 7 Replies
View Related
Dec 16, 2010
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
View 9 Replies
View Related
Jul 4, 2011
i have 500 GB SATA drive with windows 7 and Ubuntu 11.04 500 GB drive divided in 3 partitions on one partition thers is windows 7 and on 2nd Ubuntu now i'm installing a software it's asking where you want to load your Grub and i don't know in which partition my GRUB is. my question is is there any way to find out which parition got my Ubuntu GRUB?
View 3 Replies
View Related
Jan 20, 2010
I successfully installed fedora 12 the other day, got it up and running fine. Yesterday I installed windows 7 on my second partition on the drive (dumbest thing ever, I know). What I forgot is that windows can't handle not being in control, and that it would replace my bootloader (grub). "No problem" I thought. I booted a live usb that had grub-install on it (which has worked for me in the past). The drive which needs grub on it is /dev/sda, sda1 being the partition with /boot on it.
So I do the following in the live usb:
Code:
mkdir /media/fedora
mount /dev/sda1 /media/fedora
grub-install --root-directory=/media/fedora /dev/sda
But after a few seconds I get an error message saying that "stage1 not read correctly". When I go into the drive I can see that there is a file /media/fedora/boot/grub/stage1, and the device.map which grub creates appears to be correct (/dev/sda corresponds to hd0). Going into the grub terminal and running "root (hd0,0)" then "setup" gives a similar result (complains about not being able to find stage1).
On another forum someone mentioned tyring "depmod" before installing grub, but that didn't work for me.
View 4 Replies
View Related
Oct 4, 2010
I have a 9.10 ubuntu desktop on a tower (bought 2004) working fine, and wanted to add a 10.4 server on an additional partition. After install, I stated grub may be newly written, as the list of os was fine. After reboot I got "grub rescue>" I managed to get the system working again, and now I have a grub2 menu list stating correct entries. But when I select the server entry the boot fails telling "disk not found" (The UUID of the partition given is correct, and also shown when accessing the partition from the 9.10 desktop (this needs an additional authentification when mounting) grub shell command ls does not show the partition, all other tools (life-CD, working installation, gparted etc.) do show it normally, I cannot find any difference. The partition is on the beginning of the disk
View 3 Replies
View Related
Oct 11, 2010
i have a 250gb hdd and a 160 hdd. i installed wind0ws 7 on the 250 and then ubuntu 10.10 on the 160. In the past (8.04-10.04) after install ubuntu on boot grub would give me the option to go into ubuntu or windows, now ti doesnt give me that option and boots directly into ubuntu. I dont even think it has recognized that windows is there.
View 9 Replies
View Related
Nov 25, 2010
After installation of Ubuntu 10.10, grub loads and has the right menu list. However, Ubuntu doesn't load and I get an error message of :Gave up waiting for root device. (with a list of common problems)There is also:ALERT! /dev/disk/by-uuid/1584598e-b8e5..... does not exist.
View 9 Replies
View Related
Feb 10, 2010
I seem to have determined a few other things about my "only gets as far as a GRUB command line" problem:To recap, sda3 (GRUB hd0,2) is the main Linux partition; sda9 (GRUB hd0,8) is the boot partition.GRUB is 0.92.Installation was from an 8.04LTS live CD (at least, that's what the envelope says it is)/"/boot/grub" (i.e., "/grub" on sd9/hd0,8) contains a "menu.lst" file. I modified it (had to do a "sudo gedit" from a command line!) to (1) comment out the line that hides the boot menu, (2) change the timeout from 3 seconds to 90, and (3) add a menu line based on my succesful manual IPL of DOS.
It still boots to a GRUB command line. If I do a "configfile /grub/menu.lst," a boot menu comes up. DOS will successfully IPL, but Linux still gets a "no setup signature found," (ditto for "recovery mode"), which suggests either a bad kernel, or a kernel that's too big for the GRUB to handle.Why would it be finding its way to grub, but not finding the boot menu file?Why would the live CD come up just fine, yet the GRUB and kernel it installs fail?
View 9 Replies
View Related
Nov 29, 2010
I am running Ubuntu 10.10. Normally when I boot, I get the choice to run Ubuntu or the Windows loader, where I choose between 7 or XP. I have just noticed that when I boot now, I do not have the choice of going into windows. This has happened on two of my PC's just in the last few days. I assume one of the updates has overwritten the grub configuration file as I still get the grub menu but not the windows option. I have tried sudo update-grub but this did not solve the problem.
View 9 Replies
View Related
Apr 14, 2011
I deleted the wrong line in grub.conf, and now cannot boot into my Windows Vista anymore. I really need to get it back right away, I am trying to do my taxes, and they are on there, and I can't get to them. I added this to grub.conf, but no luck.
Vista
root (hd0,0)
chainloader +1
View 2 Replies
View Related
Oct 12, 2010
i installed ubuntu inside windows but someone instead of uninstalling it directly deleted the ubuntu folder inside windows ,thinking that the partition will be deleted. but when i restarted the system and command prompt came and said unable to find boot record and i couldn't boot windows as well and a grub prompt came like grub>, then i inserted the windows boot cd and repair the boot record error but my problem is , instead of doing this way, can i do so by grub prompt directly without using winidows cd.
View 1 Replies
View Related
Jan 1, 2011
Im trying to do a frugal install off the hard drive (no usb,cdrom) with unetbootin. It installs grub and then will boot the installer but is still tries to find the removable media. Whats going on????
View 2 Replies
View Related
Jan 17, 2009
I am trying to install my laptop in a triple-boot configuration with Fedora 10, Windows XP and Windows 7 beta. I did already installed them in that order. This is how it is layed out on the harddisk:
Now i want to use grub to present a menu at boot so i can select an OS. Because I installed XP last it boots straight into XP. I've understood i should be able to do the following:
All goes well until the last step (grub-install). It gives an error stating that /dev/sda doesn't exist, which is correct; It doesn't. I do have the "device" listed outside of the chrooted environment.
My question is: How do I get /dev/sda available in my chrooted environment?
View 3 Replies
View Related
Jun 2, 2011
I had Fedora 14 (x86) and Windows XP with Grub Legacy (Grub) for dual boot in my desktop.
I installed Debian and Grub 2 replaced Grub in the MBR.
Must I reinstall F14 to recover Grub as bootloader or is there another lighter way to do it?
View 3 Replies
View Related
Jun 5, 2009
I've got myself the curious situation where, when I boot the system, I can get grub to start, but it always drops to the prompt.
I can run:configfile /grub/menu.lst
and this brings up the menu with no problems, and from there I can boot the system to either linux or windows. What I don't understand is why it wont go to the menu in the first place?As far as I can tell, grub/Kubuntu got confused when installing, as each of the hd#,# settings in the menu.lst have needed tweaking to let the system boot. (e.g. windows is actually hd0, but the original install had it at hd2. Likewise linux is on hd1, but the menu.lst had it at hd0). I've happily tweaked these to make the system boot, but would appreciate any help in convincing grub to actually load the menu without me having to use the prompt.
View 7 Replies
View Related
Nov 1, 2010
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
View 24 Replies
View Related
Jan 31, 2010
I've trawled the internet but can't seem to find the exact same issue, so I've made a new thread. So, I installed Ubuntu onto a 160gb drive. I have other drives in the system, but I disconnected them so that the system drive would be sda. Ubuntu installed perfectly with no issues whatsoever. I connected the other drives in the system, and again it booted up perfectly (although I can't remember whether the 160gb drive remained as sda or became sdd). Then I attached some extra drives temporarily to do some data shuffling.
This moved my system drive to become sdf. My computer booted fine multiple times like this, but when I was finished with the drives I rebooted and suddenly everything broke. For some reason my ubuntu installation showed up in the GRUB twice, and neither of them booted. So, I popped in the Live CD (which I'm using to type this post), and decided to update the grub. I chrooted into my system drive and ran update-grub, but it simply returned something like this:
[Code]....
View 7 Replies
View Related
May 25, 2010
Is fedora 13 using GRuB 2 or still uses GRuB legacy?
View 8 Replies
View Related
May 24, 2011
Ive installed about 50+ boxes with ubuntu/mint/fedora/etc but f15 is giving me a real headache...
I tried a fresh install over f14 with this drive (sdb, sda is my backup disk)
Installed obviously in part7
After rebooting (successful copied live image on hdd)
Code:
After another couple of installs (with lvm & w/o lvm) & even disconnecting the second harddrive -> same issue
Typing 'ls' in the rescue grub prompt returns
Code:
Cant 'ls /' into a single them - unknown filesystem (grub is installed in mbr of sdb) 'linux rescue' (wanted to try manual grub installation) command didnt work either.
Now again on fedora 14, same installation procedure, works fine. (and i wont bother doing a full distro upgrade from f14)
View 1 Replies
View Related
Jun 8, 2010
I followed the steps from [url] to download and install the kernel source code.
"Following Generic Textbooks
Many of the tutorials, examples, and textbooks about Linux kernel development assume the kernel sources are installed under the /usr/src/linux/ directory. If you make a symbolic link, as shown below, you should be able to use those learning materials with the Fedora packages. Install the appropriate kernel sources, as shown earlier, and then run the following command:
Where is my kernel source located which i can modify. I cant find anything in usr/src/kernels? Why?
View 3 Replies
View Related
May 29, 2010
Going from Fedora 12 to 13. Got to the point where I have to reboot to install, system reboots to 12. This is a triple boot system with Open Suse and Mint, and the grub2 bootloader from Mint is the bootloader for the whole shebang. In the "how to use preupgrade" instructions there's a line that says "dentify the drive and partition of your Fedora /boot folder." How? If that sounds odd, consider that in my set up "computer" shows 4 partitions (and with just three operating systems..?). I can mount them, but have a problem telling which sytem is Fedora, Suse or Mint. And getting the FEDORA bootloader to find the PREUPGRADE kernel ... Momma said there'd be days like this.
cat /etc/fstab just returned /dev/sda1 on /boot. I installed Fedora first, before Suse or Mint, so being on the first drive or partition sounds right, but the multiple drives throws me, and "just guessing" doesn't seem like the way to go.
View 12 Replies
View Related
Feb 6, 2010
I installing Fedora 12. I did ALL the same as in the installation guide, GRUB installed into MBR. And after installation and rebooting - nothing happens, after BIOS messages there is nothing - computer hangs. GRUB seems to be not installedI have 2 hard disks. At first I tried to install on the 2-nd drive(it is slave). Afterward I detach one disk and try with only one hard disk(it is master). Nothing changes - computer hangs.
View 3 Replies
View Related
Dec 20, 2010
I decided to upgrade my FC installation to the latest version - FC itself offered the upgrade when I turned the machine on, so it appeared that it was nicely packaged to make the upgrade easy.After a long download of packages, the machine rebooted and then started taking me through configuration options (timezone, disks to use for the installation etc) but then it crashed trying to write to disk and now leaves me at a grub prompt whenever I boot.Is there any way to "get at" the installation files and get back into trying to install or do I now need to download an ISO and burn a DVD and start all over again?
View 1 Replies
View Related
Mar 18, 2011
I installed F14 from my usb according to the wiki page using unetbootin. The usb boots perfectly and i get a working F14 system. I partitioned my HD with gparted and got a /,/home and swap partition, then used the installer to install the system using them. The installer finishes without a problem and ask me to reboot. When I reboot , there is a blank black screen. No grub menu , no fedora loading. I reboot with the usb and the partitions are full with the files from F14 , there is no xorg.log in the /var/log/ so f14 doesn't even start so the problem seems to be with grub.
I check the grub.conf in /boot/ , i set the timeout to 5 secs , i check that the kernel is using nomodeset (according to this wiki page there is a problem with ati), xorg.conf is using vesa as a driver and I reinstall grub with grub-install with no problems.My notebook is a acer aspire 5552 , i don't think is a hardware problem because I've used arch and opensuse with no problems in it. Fedora seems a nice distro , but this error is preventing me from using it.
View 1 Replies
View Related
Jul 23, 2011
This is partly a note to myself for the future and a guide to anyone who experiences similar issues.
So, I had to reinstall Windows XP since my previous installation gave me a blue screen error due to reasons unfathomable. Naturally, this deleted the GNU Grub and I could not login to my Fedora.
I read that apparently booting from a DVD installation offers an option to enter the rescue mode. I did not have a DVD, I only had the LiveCD so I had to figure out a way to reinstall Grub from the LiveCD. The following method seemed to do the trick.
Run the LiveCD and open Terminal.
1. Find the partition where the Grub Stage1 is code...
View 1 Replies
View Related
May 18, 2011
shell scripting in Fedora14I want a script"Find in curent folder for files, and it copy first file he find with name gived by user, if name already exist then echo error message and finish"command usage " bash scriptname copyASname"
smthing like Code: #!/bin/bash
for files in /home/user/*
do
[code]....
View 1 Replies
View Related
Jul 20, 2010
I just installed Win7 (I need it for work -.-") and, of couse, it installed its boot loader and I can't boot F13 any longer. The question is, how do I restore GRUB from a F13 live installation media without destroying Win7?
I remeber trying something like that a couple of years before when I had the same issue:
Unfortunatelly, that doesn't work and at the next boot I am stuck with Windows again how to restore grub from a F13 live CD?
View 1 Replies
View Related
