Fedora Installation :: 13 Kickstart Install From HDD ISO?
Jun 1, 2010
I have not used Fedora in a long while (since version 5 I think).I am moving back to it for my new home server but there is something that is driving me completely crazy. Can you no longer do HDD installs from a ISO?I whipped out my old kickstart files and worked off of them and all seams to be OK but every time it says it is unable to find the install source.Here are the first two lines of my KS file:
Code:
install
harddrive --partition=sdb1 --dir=/linux_install/fedora/iso
[code]....
View 1 Replies
ADVERTISEMENT
Nov 18, 2009
I am trying to install fedora 10 kickstart on my server.But I can't, because my kickstart installation hangs at post install scripts.It is not showing any message & stopped.
View 1 Replies
View Related
Jun 19, 2009
I'm doing a Kickstart install of Fedora 11 with a DVD ISO as the installation source and the ks.cfg file in the root folder of the DVD. The error message I get is: "Unable to read group information from repositories. This is a problem with the generation of your install tree."
View 3 Replies
View Related
May 3, 2011
I am trying to use kickstart to create a master boot disk for all of my server installs. Unfortunately it seems to be missing some of the packages specified and I can't figure out why. Here is the packages section of my ks.cfg file
Note: all at symbols have been replaced with # because the forum filter seems to think they are urls.
%packages
#admin-tools
#base
#core
#dns-server
[Code].....
View 1 Replies
View Related
Apr 11, 2010
I am trying to kickstart the F13 alpha from a usb drive.The usb drive is labeled "disk" and is setup with extlinux and can boot fine.My laptop has one hard drive (sda) and the only other drive is the usb (sdbThe ISO is copied on the root of the usb diskI extract the boot files from the F13 Alpha ISO and copy them on the disk also
Code:
cp /mnt/ISO/images/install.img /media/disk/images/install.img
cp /mnt/ISO/isolinux/vmlinuz /media/disk/boot/Fedora/.
[code]....
View 1 Replies
View Related
May 2, 2011
Which directly is accessible during the %pre section? I try to use wget to retrieve a file from FTP to /root but after the machine is build, I don't see that file in /root directory.
View 3 Replies
View Related
Jan 25, 2010
I want to install Red hat based custom OS in a complete automated mode.I ll have my kick start file inside the CD rom and when I boot with that ISO or CD.The OS should start installing by taking parameters from the kick start file without having to specify the path of the kick start file inside the CD.like "linux ks=<path>".Is it possible to achieve this by writing any script or something so that when the CD boots the kick start path is passed automatically to the anaconda installer.
View 5 Replies
View Related
Oct 13, 2010
I have successfully setup a kickstart environment for installing the original Fedora 13 using PXE/DHCP/TFTP. Now I want to build a customized kernel and install it using the same Kickstart setup. After building the new kernel.rpm file, what are right steps to do to replace the original kernel rpm in Kickstart RPM directory, like fixing modules dependency, creating new bzImage and intrid etc?
View 2 Replies
View Related
Jan 5, 2011
I am looking for a thorough document that explains:
1) Creating a local repo
2) Using kickstart to access that repo
3) Performing a network install using kickstart
Some background: I have several racks of servers that I need to install Fedora on. These servers CANNOT be placed on the internet; hence the need for the creation of a local repo on some other machine (which will be connected to the servers via a local network). I am not sure how to create a local repo, so that one of my questions.
I'd also like to automate as much of the install as possible and kickstart is the only thing I know of for that. I am no guru with kickstart, but I have used it before to successfully install Fedora Core 6 -- I am hoping there are no great changes with the current releases of Fedora (12-14)?
A local repo of Fedora Core 6 was created by someone (some time ago) on a workstation (running FC6). This is what I've used in the past to install FC6 on previous servers (via a kickstart CD). However, I dont have the documentation on how the repo was created or how the kickstart CD was created I've gleaned some ideas ok kickstart from the pieces I've read on web, but none of it has been specific to the latest releases of Fedora.
View 3 Replies
View Related
Apr 5, 2011
I'd like to write a kickstart file that installs available Fedora 14 updates as part of the installation process, much as if I was doing a standard Fedora 14 installation and had enabled the 'updates' repo.
So my question is, is there an easy way to do this? I don't want to have to go down the route of downloading all updated packages and maintaining my own update repo (or indeed, creating a repo with the dependencies listed above).
View 1 Replies
View Related
Sep 7, 2009
I'm trying to set a kickstart DVD for automatically installing Fedora 10 without touching the existing data partitions on our systems. I've got a kickstart file that works great from a kickstart server however I'm having issues with creating an unattended kickstart DVD. I've attached a copy of the kickstart file from the DVD. For some reason even though all the packages we are installing are on the DVD, anaconda always attempts to connected to the internet to get repository information after completing the partitioning. I have changed the install type to 'cdrom' before anyone asks! I have removed my %pre and %post sections as these just copy in some config files and do not touch anything other than local paths.
View 3 Replies
View Related
Feb 16, 2011
couldn't find anything similar on the forum.I am writing a kickstart for fedora 14 with a partition table similar to:
part / --asprimary --fstype="ext4" --size=10000 --encrypted --passphrase=pass1
part /boot --asprimary --fstype="ext4" --size=130
part /var --fstype="ext4" --size=5000 --encrypted --passphrase=pass1
[code]...
View 9 Replies
View Related
Jan 4, 2009
I have recently been given the task of setting up some thirty odd netbooks with F10 and i was wondering if there is a way to generate a kickstart file from the first netbook (my one lol ) that i have setup to our needs so as to use it to create the same install on the rest of the netbooks. i had thought that i could use the anaconda-ks.cfg file in root's home dir but it is not at all representative of the custom package list i chose during the install.
View 8 Replies
View Related
Oct 22, 2009
Fedora 11. I am trying to setup kickstart so it lays out a mirrored volume group. I have 2 disks sda and sdb. I want a primary partition on each disk 200mb in size for /boot. This is to be mirrored onto raid device md0 (raid 1). The rest of each disk is to be setup partition which grows to use the remaining space, and is also mirrored (raid 1) md1. Onto md1, I want an LVM volume group called rootvg, and logical volumes set up on there for /, /home, /usr, /tmp etc. I can lay this out manually, and it works fine. However, the code below, which is slightly amended from a previous anaconda-ks.cfg file doesn't work.
Code:
clearpart --linux --drives=sda,sdb --initlabel
part raid.11 --asprimary --size=200 --ondisk=sda
part raid.12 --grow --size=1 --ondisk=sda
part raid.21 --asprimary --size=200 --ondisk=sdb
part raid.22 --grow --size=1 --ondisk=sdb
raid /boot --fstype=ext3 --level=RAID1 --device=md0 raid.11 raid.21
raid pv.1 --level=1 --device=md1 raid.12 raid.22
volgroup rootvg --pesize=32768 pv.1
logvol / --fstype=ext4 --name=rootlv01 --vgname=rootvg --size=512
logvol /home --fstype=ext4 --name=rootlv02 --vgname=rootvg --size=256
logvol /tmp --fstype=ext4 --name=rootlv03 --vgname=rootvg --size=128
logvol /usr --fstype=ext4 --name=rootlv04 --vgname=rootvg --size=3072
logvol /var --fstype=ext4 --name=rootlv05 --vgname=rootvg --size=1024
logvol /opt --fstype=ext4 --name=rootlv06 --vgname=rootvg --size=1024
logvol swap --name=LogVol06 --vgname=rootvg --size=1024
View 2 Replies
View Related
Aug 13, 2010
I have a kickstart script that attempts to create user "joeblow" with an encrypted password. The user is created okay, but the password does not seem to "take". After installation is complete, and the system is rebooted, this is the relevant portion of /etc/passwd:
Code:
This is the relevant portion of /etc/shadow:
Code:
Where there are two exclamation points, I would expect the encrypted password (as is the case for the root user, which is also created in the kickstart file).
The relevant line in my kickstart file looks like this:
Code:
That password string, which is 34 characters, is the word "password", encrypted with this command:
Code:
Also in my kickstart file is this line:
Code:
After the install is complete, I reboot and attempt to log in as "joeblow", but no dice. If I log in as root, and manually put the above encrypted password into /etc/shadow for jowblow, I can then log in as joeblow.
View 2 Replies
View Related
Sep 8, 2010
I have made the ks.cfg file with system-config-kickstart and placed it in the root Disk1.iso's root directory.I then made the Disk1.iso with the changes done and burnt the whole Installation image on a CD-ROM.The machine was booted with the the Disk1 and it went well till disk partitioning.Then suddenly installation halted with a message: "Unable to read package metadata. This may be due to a missing repodata directory. Please ensure that your install tree has been correctly generated.
View 3 Replies
View Related
Jun 27, 2010
I have configured the remote installation of Fedora 13 with kickstart with nfs installation method. All work ok until I boot the Fedora 13 client system.
Fed13 client system receives the IP address from dhcp, receives the loader, loads vmlinuz and initrd.img from tftp, load anaconda, configures the network and dev eth0, mounts nfs server to load kickstart file, loads kickstart file (language...) but when it tries to mount nfs server to install from Fedora 13 installation tree it fails.
First, I thought that I had an error on my NFS configuration but I was wrong. I opened tty with ALT+F4 on the Fedora 13 client and I sew this error:
Code:
Is this a bug or can I modify anything to correct this error? How?
View 3 Replies
View Related
May 6, 2010
I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.
View 1 Replies
View Related
Mar 20, 2011
I have a working Centos 5.4 (== Red Hat Enterprise Linux 5.4) kickstart installation working with pxe boot.I am now trying to do the same kickstart installation but from a SCSI harddrive on the hardware box itself.In other words, the system already has an older distribution on it, and it has a formatted LVM partition with free space. I expect to upload an initrd, vmlinux, ks.cfg at the top of this partition, edit the grub.conf with something like so:
grub.conf
--------
title TestOS
[code].....
View 2 Replies
View Related
May 23, 2010
I'm trying to install CentOS 5.5 from harddrive using a kickstart file. Kickstart file is read correctly, it contains the following 3 lines (+ additional config):
install
harddrive --partition=sda11 --dir=repos/CentOS/5.5/isos/i386
repo --name="CentOS-5.5 - Updates" --baseurl=hd:sda11:repos/CentOS/5.5/updates/i386
I've downloaded both CentOS-5.5-i386-bin-DVD.iso and CentOS-5.5-i386-bin-1of7.iso, but anaconda (the installer) asks: - What partition and directory on that partition holds the CD (iso9660) images for CentOS? ...
VT3 gives these messages:
INFO: partition /dev/sda11 selected
INFO: mounting device sda11 for hard drive install
INFO: mntloop loop7 on /tmp/loopimage as /tmp/hdimage/repos/CentOS/5.5/isos/i386/CentOS-5.5-i386-bin-1of7.iso fd is 12
[Code]....
View 4 Replies
View Related
Apr 12, 2010
when i use kickstart to install centos from cdrom (i make it myself in my way),i got a %post script problem with the kickstart file. 1.%post script used to copy my own software from cdrom to hard disk.then make install automaitlly with bash script.
the %post script like :
%post
mkdir -p /myownsoftware
cp -r /mnt/myownsoftware/* /myownsoftware
cd /myownsoftware
[Code]...
View 10 Replies
View Related
Nov 18, 2010
Is it possible to install more than one machine simultaneously with kickstart? I need to install 15 machines.
View 2 Replies
View Related
Sep 15, 2010
Is there a way to check RPM signatures during a kickstart install? Seems as if the signatures are not checked during an installation.
View 5 Replies
View Related
Sep 8, 2009
we can't get the clients in our lab to do a kickstart install. we're doing the install by booting from the Centos 5.3 net install cd and anaconda starts, but terminates abnormally reporting a SIGSEGV fault. Interestingly, attempts at doing an install from a CD and without the network connection results in this error:
X11TransSocketINETConnect() can't get address for localhost:6001. Temporary failure in name resolution.
View 7 Replies
View Related
Oct 22, 2009
In the release anouncement there is mention of adding additional repo's at install time. Is this also possible in the kickstart file?
View 1 Replies
View Related
Mar 3, 2010
I have compiled and created a kernel rpm kernel-2.6.18165.11.1.el5-3.i386.rpm
then created initrd image
I have installed the above via kickstart installation
%post
mount xxx.xxx.x.xx:/var/www/html/os/i386 /mnt/tmp
cd /mnt/tmp
rpm -uvh kernel-2.6.18165.11.1.el5-3.i386.rpm
cp initrd-2.6.18-165.11.1.el5.img /boot
[Code]....
View 2 Replies
View Related
Jan 17, 2011
I am so close to the answer i think. My goal is to fully automate an entire Ubuntu installation off a usb flashdrive from start to finish. So, i did as this guide said and i made a kickstart ks.cfg file that is used to automate an installation, as i'm sure many of u know.The next step has infinitely confused me. To make the ks.cfg file boot automatically and startup an installation to my specifications.from this linkttp://old-releases.ubuntu.com/ubunt...en/apcs01.htmlI have found that editing the syslinux.cfg file in the syslinux directory on the usb can be used to load preseed file, which to my understanding serves the same purpose as a kickstart file.
View 2 Replies
View Related
Oct 19, 2009
I am trying to copy an updated splash.xpm.gz at the end of a system build but everything in the post section is total ignored.
#--- Post-installation script
%post
#!/bin/sh
#...Mount the installation CD
[code]....
View 8 Replies
View Related
Apr 6, 2010
Can an unattended Kickstart support both IDE (hda) and SCSI (sda)? The goal is to to create a new virtual machine from scratch. What I have works for Parallels in which a new VM defaults to emulate an IDE hard disk. It does not work for VMware Workstation which defaults to emulate a SCSI disk.
The relevant Kickstart section: bootloader --location=mbr --driveorder=hda --append="rhgb quiet"
clearpart --all --initlabel --linux --drives=hda
part /boot --fstype ext3 --size=100 --ondisk=hda
part pv.2 --size=0 --grow --ondisk=hda
volgroup VolGroup00 --pesize=32768 pv.2
logvol / --fstype ext3 --name=LogVol00 --vgname=VolGroup00 --size=1024 --grow
logvol swap --fstype swap --name=LogVol01 --vgname=VolGroup00 --size=1024 --grow --maxsize=2048
Can the Kickstart file be made to not care what drive type is there, or conditionally handle either type?
View 4 Replies
View Related
Apr 26, 2011
I need to do a project on installing RHEL6 via kick start file in a single DVD. I have made the kick start file and it's ready with the basic parameters like keyboard type, language, firewall and SElinux disabled. How can i boot it in the server. Also please help me in the below steps,
I need to use LVM option for File systems except swap and /boot, how can i mention it in the file?If there is a need to use NIS or LDAP where can i mention it in the file?
View 5 Replies
View Related
