Fedora :: Increase Default Large Text Size In Universal Access Settings?
May 28, 2011
I installed Fedora 15/Gnome 3 because I liked the Universal Access Settings widget for controlling the appearance of my living room computer attached to my TV. It should (when it becomes more stable) make it easy to zoom in on the screen when I'm on the couch. There is also a Large Text setting that allows me to toggle between normal text size and perhaps 125% text size.
I'd like to set that value to about 200%, but don't see how to do it. dconf-editor didn't seem to have a way. gnome-tweak-tool has a way to make all fonts bigger or smaller but I want to easily switch between normal text size when I'm sitting close and large text from the UAS. Screwing around with gnome-tweak-tool would require me to be up-close. It looks like UAS is controlled by /usr/share/gnome-control-center/ui/uap.ui, but it is a wickedly complex xml file & I don't know what to edit. Is there a per user way to change the behavior?
I have 24" dual monitors with 1920x1080 resolution on both of them. Consequently the text appears so small. I use the following text-intensive applications frequently:
Web browser (Google Chrome) IDE (Komodo) Terminal (Gnome Terminal) Email (Thunderbird)
I can configure text size on IDE, Terminal and Email. But for Chrome, it is not a good idea to set proportional font size because often one wants to see the entire (not just proportional fonts) site to be zoomed. So I am asking: Is it possible to increase DPI in Ubuntu (much like on Windows) so as to increase the text size across all apps? OR Is it possible to set permanent 'zoom' in Google Chrome, using a third-party extension maybe?
I was wondering if anyone knew how to remove the "Universal Access" icon/functionality from a Fedora 15 install?I don't need High Contrast, Visual Alerts, Zoom, etc and want to get it out of my top panel and off the system if possible. The icon I am referencing is the white circle with a person inside, arms and legs out stretched next to the sound/speaker icon as seen in this picture (not my desktop):
How do you increase the text size in the virtual terminal (the one you get to when you press ctrl+alt F1-6)? My monitor is pretty old and kind of small, so I need the bigger text size to really be able to use it at all. I tried to find the answer in google, but I couldn't find the answer. I found answers for suse and ubuntu and tried to use those. They said to edit part of the boot loader config file, but I couldn't find a similar line in the grub.conf file. And I don't want to play with it without knowing what I'm doing.
I have set Nautilus to sort files by type, but for some reason it always, by default, arranges files by size, meaning I have to actually click the "type" column every time I open a new folder. How do I make it sort stuff by type like it's supposed to?
From inside my bash script, is there a way to increase my Xdialog default font size? If not, is there any other way to do it? I found a commercial program using Xdialog with instructions on increasing the font size, but they did not say how they did it. But, it does mean it can be done: [URL]
When I increase the font size from Konqueror settings the web browser fonts change but the file manager fonts stay the same. Is there another way of setting them?
When I installed opensuse 11.2 64-bit (KDE) the installer set the root partition to 20GB by default. That seemed unnecessarily large, so I reduced it to 16GB. I then completed the install (basically a default KDE install minus games & educational stuff) and still had more than 8GB free. I'm aware that these days hard drive storage space is quite cheap, but it's not so cheap for me as I have an SSD. Would it not be reasonable to reduce the default root partition size to 12GB, or perhaps vary it according to the software package load selected?
I am using OS 11.0 Every time I boot my laptop (dell inspiron 9300 - ati video M300). I get the desktop display as 1920 X 1200. This is too large for my default. I use KRandRTray to resize back to 1024 X 768. How can I set 1024 X 768 as the default but still have the option to go to 1920 X 1200?
I'm running FC 14 and the /dev/shm is no longer as big as it used to be (under an older FC). How can I increase the size of the /dev/shm? I tried the following
Code: mount -o remount,size=6G /dev/shm
Which seemed to work, but then the system hung when I tried to use the extra space and I had to reboot. What's the correct way to increase the size of the /dev/shm partition?
Is it possible to increase the size of a partition that is using LVM?I have 5GB of unpartitioned and unallocated space on my disk. I wish to add this to my VG. This free space is physically before the LVM partition.Can I increase the size of the physical partition using pvresize? Or is the only way to to create a new 5GB partition, add it to the VG and allocate it to the LVs? This is not ideal as I wish to minimise the number of partitions I have on the one disk.
Can anyone tell me how to increase system file's partition size.I have ext3 type partition where FC11 is installed.Is it possible to increase the size of ext3 without lost of data?
fedora 12.i have one partition which is mounted on a rootfiles folder having space of 700gb which is located on a /directory.but when im adding data on rootfiles my /root directory space is also getting increased.so could any one telme how to increase the size of root partition.i want to resize my rootfiles folder to 600db and want to add 100gb to my / directory.how can i do this plz helpme this is important 4 me.first i will free 100gb then i will add 100gb to root directory.but i dont want to loose any data on rootfiles folder.
First, I upgraded to F15. All went smooth. No problem. But if I pull up a terminal in KDE via menu->utilities->Terminal, I get a terminal that shows only 3 lines. If I try to increase the size by pulling the edge it locks up the computer. Functions otherwise. This is Gnome Terminal 3.0.1. X terminal works fine. So does Konsole. But not the above application from the menu.
I have fedora 13 set up on a HP6715S laptop. Runlevel 3 is a problem, because the capital letters are the size of full stops. Reading a little, I can try a grub vga setting, but I am not keen as my screen is 1200x800 and X cannot set it otherwise, so I doubt grub could. There's KMS for radeon cards, and the kernel can do what it likes. The biggest font supplied with fedora is sun12x22, which doesn't even have a euro sign. I gather I can go to a height of 32. Anyone know of larger consolefonts, or a wheeze to double the size of one of the others, e.g. lat9w-16? setfont-h32 increases height, but not zoom, so it's like a double spaced console.
When I downloaded the ISO file thru DAP it showed up as 699.44MB but when I completed the download onto my HDD (XP SP3 & NTFS) it shows up as 716,230KB (see below) with a result when I try to burn on to a CD. I get an error that the file is too large. Whats happening, is there a solution to this?
I have a few VMs set up with virtualbox but am finding that I'm now running out of space in some of the VMs. I really don't fancy creating new VMs and reinstalling and configuring them so is there an easy way to increase the size of the virtual disks?
I have 4 primary partitions on my hard drive. One of these partitions has been divided into 3 logical partitions with some free space left over. The order is this: "swap", "/", "/home", and about 80GB of unallocated space. I want to incorporate that unallocated space into the home partition. I tried this by booting a live CD and starting GParted but it didn't give me the option to increase the size of my home partition or the primary partition as a whole. The only thing it would let me do is decrease the size of my home partition.
Default Ubuntu drivers work fine, but wanted to take advantage of what the new drivers had to offer.
Using Ubuntu 10.10.
Installed latest catalyst drivers vers 11.3 My board has a inbuilt ATI Radeon HD 4250
i installed originally via admin -> additional drivers, but my desktop has shrunk about an inch around the edges (splash screen also changed)
I'm using a Panasonic Plasma Screen (XBMC HTPC) vis HDMI.
Catalyst mentions the Panasonic in Display Manager, but also mentions a Projector (1), which is also the Panasonic TV .
Resolution is set ate 1920 x 1080 and refresh 50 Hz.
I then reinstalled the ATI drivers as per [URL] , but no change (and lost screen coming out of XBMC).
I also installed the splash page fix here [URL] so now at least it looks pretty.
fglrxinfo gives me
Code: display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: ATI Radeon HD 4250 OpenGL version string: 3.3.10600 Compatibility Profile Context
i have this directory with multiple images 'pics' and the size is 20mb, and i want to make a .zip or .rar package of this directory but with an increased size so the .zip/.rar file will be 100mb, and then when you extract it the file size is the original 20mb
Finally i have installed ubuntu 10.10 on my home PC. Its working so so good i cant really imagine :-). At the time of partition due to my immaturity, i selected the size of '/' to be 10 Gb. Now i want to increase it without reinstalling ubuntu. Is there any safe way of doing it ? i did some research and came to know that Gparted might be of some help, but i will really be grateful if any of you can guide me.
the use of livecd for example, can i use liveusb instead ? i was thinking of making liveusb of centos 5.5.
We have a problem where there is not enough space in our /tmp partition. We are trying for fix our mysql database, and keep running in to the space issue... the error we are getting says:
myisamchk: Disk is full writing '/tmp/STGL3SGd' (Errcode: 28). Waiting for someone to free space... (Expect up to 60 secs delay for server to continue after freeing disk space)
Our /tmp partition is current set at 485M, but it is not large enough to handle the database fix...
Does anyone know of a work around - perhaps to assign different directory for the temp files?
I have centos 5 virtual server running on ESXi (vsphere 4.1).i have to increase disk space. I increased the size of the virtual machine in Vcenter.But i allready have 4 primary partitions. when i run fdisk /dev/sda, i get this :
Device Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 3916 31350847+ 8e Linux LVM /dev/sda3 3917 6527 20972857+ 83 Linux /dev/sda4 6528 13054 52428127+ 83 Linux
