Fedora Installation :: BFO Install Of Fedorda 13 Failure?
May 26, 2010
BFO install via USB[URL]..I get through all of the initial menus, and to the main installer, after which is says "starting installation" (this is perhaps 2 hours into the installation). About 3/4 of the way through I get a dialog: "The file libssh2-1.2.4-1.fc13.i686.rpm cannot be opened. This is due to a missing file, a corrupt package or corrupt media. Please verify your installation source. If you exist, your system will be left in an inconsistent state that will likely require reinstallation. Reboot or Retry"
[screenshot attached] I have clicked retry several times and it doesn't continue. I have previously had no problem installing Fedora 13 beta with the same hardware.
View 4 Replies
ADVERTISEMENT
Nov 30, 2010
I have installed fedora 14 on a spare computer for a home server using Amahi ( it's the beta version).During the install i did something regarding the network config, what, i do not know,i have been trying to access the remainder of the Amahi setup but have no network. This was a week passed,i have read anything i can get on the network config and have tried plenty (still trying to figure /etc). I have tried some of the fixes descibed in these threads. When i do connect the ethernet cable to the router (which has a win 7 OS box already connected)i loose all internet connectivity from the rest of the house (2 wireless laptops & win7 box). What am I doing wrong?
View 4 Replies
View Related
Mar 25, 2009
Just to reiterate on the title, the installation of Fedora 10 i386 (DVD) on a 32bit PC. Is failing on me after the media check (whether or not I do it), so not even making it to the language selection. Currently running a nvidia AGP video card was previously using an ati PCI card but swapping has done little to help.
The only argument that lets me passed this point is noprobe, which then fails a bit later as it can't pick up the install media. I've also tried a live CD which seems to be a bit hit and miss as to whether or not it even loads. It then either fails to even let me run the install to HDD or it comes up some error about failures in python code (Don't have the exact error as the last few times haven't even booted). Below is a couple of errors I get from the standard installer
[Code].....
View 8 Replies
View Related
Apr 7, 2010
My laptop died while installing F12, without completing installation. Now I can not boot the computer from HD, CD, or USB. I have flashed the BIOS with the most recent ROM. I can access the BIOS setup and exhausted all my options there, which is mainly boot order. At the moment, the boot process goes to a blinking cursor and does not allow for input. The laptop in question is a lenovo Y510 that was previously running F10 with a single partition.
View 2 Replies
View Related
Jan 5, 2011
Been running Fedora for a while now, iterating up through versions to 12. Decided to to a clean install upgrade to 14. Apparently, bug mistake. Everything seems to be progressing fine, but after 'transferring install image to harddrive', the 'Starting Install Process' fails withsystem-config-lvm-1.1.15-1.fc14.narach.rpm cannot be opened.I have no idea what to do with this. I've reburned the install disk a couple of times (and checked the HASH) -- no apparent problems with the install media.Tech details: x86_64 install on a multi-pro box with a 3ware raid 5 controller (5 disk). I've never run LVMs. Two simple hard partitions (/ and /home). Fedora 12 installed with no problems (as did every other version of Fedora <=12).---------- Post added at 12:29 PM ---------- Previous post was at 11:54 AM ----------Some additional information:1 tried Fedora 13 -- wouldn't even recognize my disks. Installer hung at trying to find basic storage. Not a good sign2 tried my old Fedora 12 install DVD -- again, worked like a charm. Expect that F12 repos are now closed.
So, it seems as if some 'change' between F12 and F13/14 has made some part of the install process choke on my 'hardware' (I'm guessing something related to 3ware RAID card). ---------- Post added at 01:51 PM ---------- Previous post was at 12:29 PM ----------I just tried CentOS 5.5 (x86_64). Also installed fine. For some reason, Fedora >= 13 absolutely won't let me get past the problem noted in the OP. I suppose I could go with CentOS (for long EOL support), but I need some of the newer compiler/dev libs in Fedora 14 for some projects I'm working on.
View 5 Replies
View Related
Aug 21, 2011
I downloaded Fedora 15 Live and Fedora 14 Live to try to see where Linux is for music and broadcast audio on a laptop. It turns out I have to use 14. 14 and 15 both sort of work as live out of the box, although why they ship with the common Broadcom wifi driver missing and the touchpad tap disabled beats me. I also never found the magic button to close down 15. There must be one, but blow me I couldn't find it. Then I tried to follow the instructions at [URL] which mostly seemed to work. I need to keep Win 7 as this is the 32-bit test machine. I used EasyBCD v2.1 rather than the older version the guide is written for.
Booting into Win7 at first worked, then a boot into Linux stopped at a line that said something about a kernel thread helper Then Win 7 blue screened on boot, although it would boot to Safe Mode. Removed Veriface from the Lenovo laptop and it would boot Win 7. Tried setting Drive in EasyBCD to "Boot" rather than "C:" for Fedora. Now booting Fedora gave a Windows missing file message and croaked. Repairing startup with the Win 7 boot CD cured Win 7. Repeated the loop with the same failures. Re-partitioned and re-installed Fedora and just the same - a screen of text that stops. I can now boot to Windows and need help to sort out the Linux boot. How do I start to investigate the screen of text saying things like "__bad_area_nosemaphore" ?
View 5 Replies
View Related
Jun 25, 2009
I'm running a P4 system with Dual ATI Radeon 2900HD Graphics cards. When I try to install F11, the graphical interface fails to start and I end up in a text install. I've seen plenty of information on how to fix the problem post install, however I'm not nearly advanced enough to then continue the installation (the text install does not install much, particularly doesn't install the graphical interface). Is there a way to work around this (IE a more complete text install, or somehow getting it to install in graphical user interface?)
View 2 Replies
View Related
Feb 15, 2010
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
View 2 Replies
View Related
Aug 17, 2011
I'm new to this system and trying to install plug-ins but I always seem to get some sort of rejection..
[root@localhost haley]# yum install vlc
Loaded plugins: langpacks, presto, refresh-packagekit
[Errno 14] curl#6 - "Couldn't resolve host"
Trying other mirror.
Could not retrieve mirrorlist...^... error was
14: curl#6 - "Couldn't resolve host" .....
Error: Cannot retrieve repository metadata (repomd.xml) for repository: rpmfusion-nonfree. Please verify its path and try again [root@localhost haley]#
So then I checked to see if I had rpmfusion-nonfree, and I do. I really have no idea what to do, I have spent hours trying to get this work. I want to be able to open any media file, avi, wma, mp4, etc.'m using Fedora 15.
View 2 Replies
View Related
Mar 17, 2010
I need to install the libmagick9-dev packages and am getting a failure when trying to do so:
Code:
apt-get install libmagick9-dev --fix-missing
The failure message is as follows:
[code]....
View 1 Replies
View Related
Jul 31, 2010
Anyone here installed 10.04 on Pentium III's? I have tried installs on 5 of them and have had 5 video failures. These machines all currently run various earlier Ubuntu releases (8.04, 9.04, etc). All of them have 512 M memory but video memory is 32M or less. I have installed 10.04 successfully on 2 Pentium IV's that have 128M video memory so I suspect that's the difference. Is there any trick I'm missing to get the new XRANDR working on these old P-IIIs or should I give up? What I get when bringing up 10.04 from live CD is just a black screen... as 10.04 appears to grind to a halt or just hang.
View 4 Replies
View Related
Dec 23, 2010
Just finished trying to solve this by using other threads / Fresh install today of Ubuntu 10.10 configured as dual-boot with WIN XP. Grub loads latest kernel with no problem at all as long as the keyboard is NOT touched in any way. Touch any key and grub hangs infinitely. There is never any success in changing boot selection in any way. I tried reloading grub from the LiveCD version 10.10 with no success, then I tried reloading it from a 10.04LTS LiveCD which totally blanked grub from the boot process entirely, then I tried purging grub and downloading new code as instructed in another tutorial here on the forums. After the final effort I have restored access to 10.10 on the HDD so that I can boot without the LiveCD, but I am back to the choice-less grub! It's 10.10 or nothing! I need complete instructions on how to obtain and document the diagnostic information needed to trouble-shoot the issue so that I can provide the data you need to assist me in repairing this boot loader...When I downloaded the new code and installed it, the system recognized and properly identified all partitions and OSes on the system. I should boot from /dev/sda and the linux partition is located on /dev/sda6 the WIN partition is on /dev/sda5. I did notice some strange information concerning the starting and ending locations of the partitions when I was attempting to correct this issue. If that information seems relevant I will post it upon request. (if instructed on how to do so) Should I repost this as a bug report? (Am I posting in the wrong location?)
View 9 Replies
View Related
Mar 21, 2010
When I install either desktop version of Ubuntu 9.10 or Xubantu 9.10 it boots ok when ask to reboot at the end of the install, but will not reboot after that (2nd attempt and all after fail)On 2nd and later attempts the grub menu comes up and I choose default Ubantu and the Ubuntu circle logo displays for about 30 seconds, and most of time I see it try to access my floppy drive (sometimes the floppy drive light stays on, sometimes it does not) a cursor then blinks in the upper left hand corner for about 10 seconds and then the screen goes blank and freezes there until I power down.
My System
Dell Dimension 2350
Celeron 1.80 G Hz
768 Meg RAM
30 Gig hard drive
Note: Xubantu installs OK to HD on another system I have, but not on this Dell. To test the Dell I did install Puppy Linux with default grub loader to HD ant it works OK (boots OK to HD each time).Side note: At first I tried this Dell to set up dual boot with XP and Ubantu and same symptoms Ubantu only booting OK once and then never again so I thought it was dual boot issue so I deleted all partions (XP is now gone) with latest GParted version and attempted installing Ubuntu 9.10 and then Xubanto 9.10 on the whole harddrive but still no boot past the first time I though this might not be a grub issue since it seems to get past grub and the Ubantu circle shows for about 30 seconds before the system freezes. only a guess on my part as I don't know enough about Grub or Ubuntu to troubleshoot without help. I see I can hit "e" to get to the grub editor and I looked at the grub boot code but don't enough about it to edit for a fix. I thought about Lilo but did not see an option on the normal Xbuntu ,or even when I used the alternate install CD,for a Lilo option. Also note I can run the live CDs for Ubuntu and Xubuntu OK on this Dell. Only HD install gives me problems.
View 2 Replies
View Related
Aug 3, 2010
Running VirtualBox 3.2.6 under some host OS (should be irrelevant which one, right?), I created a machine, intending to install Fedora 13 on it. Got the Fedora 13 Live CD iso image, and an 8.6 GB virtual hard drive, completely blank. I set the machine to boot off the Live CD image. The Live CD boots nicely and I get to its desktop. I open "Install to Hard Drive"...and nothing happens. No error message, zip, nada. Inspection of the system shows a series of odd file systems, but I have no clue what they are for and whether they're usable or not.
The sticky [URL] mentions that the blank virtual hard disk should be partitioned and formatted beforehand...So I did, using the Live CD's Disk Utility (Applications: System Tools: Disk Utility). Although the sticky states the small /boot partition should be ext2 or ext3, the Live CD installer proposes to reformat it as ext4. Shouldn't we have formatted it as ext4 right away, then? Also, the installer set the /boot partition's size to 524 MB, not 200 MB as recommended by the sticky.
OBSERVATION: This was not easy because VirtualBox sets the display to 800x600 at most, and the Disk Utility spills beyond those confines WITHOUT PROVIDING SLIDERS. It was sheer luck that the required buttons (create partition, format partition) were barely reachable (at the bottom edge of the screen). This is a serious problem, because increasing the VirtualBox display size can only be done *after* installation (see for instance[URL] - since this guest addition requires rebooting the guest OS, it probably won't stick to the Live CD).
Once those two partitions are prepared and the virtual machine rebooted, "Install to Hard Drive" works as expected.
OBSERVATION: It is absolutely inexcusable that the Live CD installer (Anaconda?) does not propose to do this partitioning and formatting for the user. It is even more inexcusable that it should fail without giving any feedback whatsoever to the user.
Aside: VirtualBox's guest additions does not work correctly (for 3.2.6 anyway). The Devices: Install Guest Additions menu merely mounts a CD image VBOXADDITIONS_3.2.6_63112) without any feedback (expected feedback because the menu ends with an ellipsis). The CD, once opened, has an Open Autorun Prompt button...which fails to do anything. Manually running autorun.sh also fails. I had to manually invoke VBoxLinuxAdditions-x86.run from a terminal to get anywhere. Even then I was unable to go higher than 1024x768.
View 6 Replies
View Related
Jan 5, 2011
I just installed the lenny (amd64) on my new core i7 870 computer (with netinst), but the kernel failure message appeared everytime I booted into gnome. I don't know how to solve this problem. Sorry I don't have much experience with installing linux, though I have been its user for a few years.
View 4 Replies
View Related
Apr 17, 2010
Tried to install 10.4 Beta2 on my testing machine. Boots but then splash screen starts scrolling really fast though I can notice that 5 dots are moving so no hanging. It takes quite a while and then black screen appears (also scrolling) and I cannot read what's there; last line looks like a prompt. Alt-Ctrl-Del reboots the machine. So I cannot even enter Live mode.
This machine is about 7-8 y.o. P4 2.4GHz (i686) on Asus P4S333/c, 2.5GB ram, GeForce3-Ti200, latest bios 2003 but runs any Linux (I tried) and FreeBSD 9-CURRENT perfectly (Even win7 is installable...but runs badly). On newer machine same CD works fine. The machine is AthlonX2 2.3GHz on Asus M3N78-vm, 4GB ram, onboard chip GeForce8200, HDDs, DVD-RW - all SATA (AHCI). What could be wrong with my old machine? Does Ubuntu still support 96xx Nvidia driver?
View 3 Replies
View Related
Aug 27, 2010
UPDATE: decided to reinstall and run the partitioner to get rid of the raid. Not worth dealing with this since seems to be lower level as /dev/mapper was not listing any devices. Error 15 at grub points to legacy grub. So avoiding the problem by getting rid of raid for now. So ignore this post. Found a nice grub2 explanation on the wiki but didn't help this situation since probably isn't a grub problem. Probably is a installer failure to map devices properly when it only used what was already available and didn't create them during the install. I don't know, just guessing. Had OpenSuSE 10.3 64bit installed with software raid mirrored swap, boot, root. Used the alternate 64bit Ubuntu iso for installation. Since partitioning was already correctly setup and the raid devices /dev/md0,1,2 were recognized by the installer, I chose to format the partitions with ext3 and accept the configuration:
/dev/md0 = swap = /dev/sda1, /dev/sdb1 = 2Gb
/dev/md1 = boot = /dev/sda2, /dev/sdb2 = 256Mb
/dev/md2 = root = /dev/sda3, /dev/sda3 = 20Gb
Installation process failed at the point of installing grub. It had attempted to install the bootloader on /dev/sda2 and /dev/sdb2. I moved on since it would not let me fiddle with the settings and I got the machine rebooted with the rescue option on the iso used for installing. Now, I can see the root partition is populated with files as expected. dpkg will list that linux-image-generic, headers, and linux-generic are installed with other supporting kernel packages. grub-pc is installed as well. However, the /boot partition or /dev/md1 was empty initially after the reboot. What is the procedure to get grub to install the bootloader on /dev/sda2 and /dev/sdb2, which represent /dev/md1 or /boot?
Running apt-get update and apt-get upgrade installed a newer kernel and this populated the /boot partition. Running update-grub results in a "/usr/sbin/grub-probe: error: no mapping exists for 'md2'". grub-install /dev/md2 or grub-install /dev/sda2 gives the same error as well. Both commands indicate that "Autodetection of a filesystem module failed, Please specify the module with the option '--modules' explicitly". What is the right modules that need to be loaded for a raid partition in initrd? Should I be telling grub to use the a raid module?
View 1 Replies
View Related
Oct 16, 2010
After buying a new PC, I decided to "reorganize" my former PC as follows:Initially it has been a dual (SATA) disk dual boot PC- one disk for each OS, while XP was fully installed on a single NTFS partition. Using Gparted I shrunk the XP partition, and created some Linux partitions. I've verified that the XP partition (sda1) is bootable. Afterwards, I removed the other (former Linux) disk from the computer. While doing so, I had to temporarily disconnect cables from both drives. Finally, I fresh installed Mint 9 (Ubuntu 10.04 derivative), on my pre-prepared Linux partitions. Installation completed flawlessly, and during the install, I've noticed that GRUB2 has been installed on sda. Rebooted and got "Disk boot failure" error.
I've checked the BIOS and noticed that the (single) drive was not recognized.
I manually tested from the BIOS and located the drive as IDE3. Saving the new configuration (F10) and rebooting- the HD gain is not identified (the CMOS battery is fine- keeps time).
Booting a live CD I can see and access all above partitions.
View 2 Replies
View Related
Aug 18, 2009
When I attempted to install 64-bit Fedora from my DVD, it failed while installing packages with the unhandled exception:
"
Traceback:
File /usr/lib/anaconda/users.py, line 163, in setRootPassword, self.admin.setpassUser(rootuser,cryptPassword(pass word,algo=algo),True)
File /usr/lib/anaconda/instdata.py,line 171, in write,algo=self.getPassAlgo()
[code]...
I know Python quite well but I have no idea why None is being passed as the first argument to self.admin.setpassUser when a non-None value is needed. The other curious thin is that the trace does not show the call to setpassUser() from the entry after it but rather to 'getPassAlgo(). Needless to say this but has kept me from installing Fedora 11 on my 64-bit machine.
View 1 Replies
View Related
Dec 17, 2009
When tried to install Chromium from add./remove programs, the following error crops up
Dependency resolution failed: A package could not be found that allows the action to complete:
libicui18n.so.40()(64bit) is needed by package chromium-.0.252.0-0.1.20091119svn32498.fc11.x86_64 (chromium)
libicudata.so.40()(64bit) is needed by package chromium-.0.252.0-0.1.20091119svn32498.fc11.x86_64
View 3 Replies
View Related
Mar 20, 2011
I just completed the latest updates to Fedora 14 - I have mono and wine on the system as well - so they were also updated. Now the only screen I can get is the failsafe (bash).
How do I recover my KDE desktop? (I noticed there were some updates for the KDE as well). I suspect something has failed during the update (selinux was also updated).
View 4 Replies
View Related
Sep 25, 2010
I was trying to install Fedora to dual boot with Vista in the middle it said that the installation failed and now it will not run grub to let me choose between Windows and Mint which I had installed. All that happens is it shows a command line and says "grub rescue>"
View 1 Replies
View Related
Feb 14, 2010
I'm having a problem installing Ubuntu Studio 9.10-alternate-amd64 onto my machine. This is the third attempt and I keep running into the same problem. Grub Boot Loader will only install to 16% when a screen pops up:
Ubuntu Installer Main Menu
Choose the next step in the install process:
choose language
configure the keyboard
detect and mount CD-rom
etc...
choosing the option "Install Grub boot loader on a hard disk" sends me back to the Grub install and once again at 16% the Ubuntu Installer Main Menu pops up. Choosing the option "Install the Lilo Boot Loader on a hard disk" resolves in an Lilo-install failure and i'm directed back to the Installer Main Menu. The option "Finish the installation" sends me back to the same menu..I'm stumped as to what to do... a disk check ensured me that the instal-dvd is valid though I can't get past this silly install menu.
View 3 Replies
View Related
Aug 19, 2009
I was finally able to install Fedora 11 x64 after choosing to only install packages from the repository on the install DVD. Prior to that when I had chosen tio install from the default online repositories, the install itself failed with a Python exception ( see my other post ). Now, however, once I boot after the install I eventually receive a kernel panic message, and failure. The exact same thing happened with CentOS 5.3 x64 after a flawless install. So unless someone knows what might be going on I will assume that Fedore, Red hat, and offshoots for x64 bit systems are just not for me. I have been able to successfully install the latest Mandriva and SUSE x64 Linux distros so whatever Red Hat/Fedora has done just does not work on my system.
View 3 Replies
View Related
Feb 16, 2009
P**sed right off now, tested this upgrade on two test systems before hand to make sure this would work.Upgrade my server from FC9 to FC10, it had two Encrypted XFS volumes on totalling 1.5TB of files which I don't have space to backup anywhere else.Have now upgraded and the Encrypted volumes are showing as not existing "volume name does not exist"
View 2 Replies
View Related
Jun 3, 2010
I had a power failure during the portion of the upgrade after the reboot where it was upgrading the packages.I tried restarting the machine with the upgrade line in the bootloader but it says it cant find the bootloader. So I rebooted into the working install and ran preupgrade again, and after it reboots, it gives an error the it cant find "root" of the previous installation.even thought the machine boots and works, I cant tell what state I am in. the boot option lines, shows a fc12 kernel designation and the "about this computer" says "release 13"Also the add remove software doesn't show anything.
View 12 Replies
View Related
Aug 10, 2010
I was having problems performing an update yesterday that failed on dovecot dependancies and after a few tries I removed dovecote (it wasn't being used) from the installation and tried again. Everything seemed to be going OK then the update (about 160MB) hung and the screen went black a few times and I think then shutdown automatically. The PC then fails to reboot and displayes the message "Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)" I have tried to get the PC to boot with the super grub disc but without success (probably my in experience) I have also tried a suggestion from one of the forums to start the PC with a live CD and typed su -c 'grub-install /dev/sda at the terminal again without sucess. I have looked at the files with the live CD there are grub, menu and kernel files there (some are in lost + found, b ut don't know wheer these should be so have not changed anything.
Is there an easy way for the in-experienced to repair the boot process ?
The PC is a pentium 4 running Fedora 13
There is a 200MB boot partition formated as Ext3
and a 19GB partition formated as a LVM with Ext4
There is a CD drive but no DVD
Everything has worked OK for the past year through two online upgrades.
View 10 Replies
View Related
Nov 9, 2010
I have followed the Nvidia driver guide exactly. I did not see any errors during the four-step process. However, on the last reboot the system gets as far as the fedora "f" on the startup screen and hangs. This appears completely fatal. I have tried the procedure a couple of times now and the result has been to reinstall Fedora 14 from scratch each time. I have been able to access the system files after the crash using the system rescue option on the installation disk. I am on the Gnome X86_64 installation. My graphics card is NVIDIA GeForce GTS 240.
View 14 Replies
View Related
May 28, 2011
I,ve tried upgrade from F14 to F15 using preupgrade, but I run into serious problem. Preupgrade downloaded all packages without problem and prompt me to reboot. After reboot installation process went ok. It was upgrading cca 1650 packages. But installation hung around package 1600 (almost on end) with message that openjpeg-devel-1.4-6.fc15.i686 cannot be installed and only option to end installer. After reboot I ended up with "kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(0,0)". It is still possible to enter grub menu, where I can choose upgrade to F15, but it fails again on that openjpeg-devel package. When I enter terminal after failure, I can see package is downloaded in preupgrade repo (and after moving somewhere else and running upgrade again it I got message that package is missing). Is there any possibility to skip this package installation or only option is fresh reinstall?
View 10 Replies
View Related
Jan 15, 2010
This is a clean FC12 install but I did add a few repos to support chromium and adobe - pretty much as described here:
[URL]
This is what happens - I tried all the cleanup suggestinons with no effect. Anyone got any ideas please? Thanks...
[eric@zeppelin ~]# yum repolist
Loaded plugins: presto, refresh-packagekit
repo id repo name status
[code]....
View 8 Replies
View Related
