Fedora :: F14 NVidia Driver Installation Failure
Nov 9, 2010
I have followed the Nvidia driver guide exactly. I did not see any errors during the four-step process. However, on the last reboot the system gets as far as the fedora "f" on the startup screen and hangs. This appears completely fatal. I have tried the procedure a couple of times now and the result has been to reinstall Fedora 14 from scratch each time. I have been able to access the system files after the crash using the system rescue option on the installation disk. I am on the Gnome X86_64 installation. My graphics card is NVIDIA GeForce GTS 240.
View 14 Replies
ADVERTISEMENT
Mar 20, 2010
I am a newbie to linux and having a hard time installing drivers for my card (gtx 260). I'm following this guide: [URL]. So do you edit the grub.conf file in etc first and then do the yum install kmod-nvidia? I've gone through this a few times, and each time when I think I've followed the steps and reboot, I get nothing. A blinking white cursor once and then a bunch of texts saying failure to mount and sleeping forever another time.
View 2 Replies
View Related
Jun 30, 2010
Had mythbuntu/xbmc running for 4 months with vdpau and all the same hardware. I killed it with an update and thought it'd all be easier To build it the 2nd time -- wrong! Fresh install of mythbuntu lucid off cd, Asus p5g43t-m pro, nvidia gforce 9500 gt
What I tried so far...Different drivers with the hardware app thingee. Multiple times -- Purge nvidia, purge nouveau, blacklist list of other video stuff with extra line after, stop gnome, manual install various drivers - 195.xxxxx or Synaptic install various drivers. Tried updates, adding avenard and daily build repos. Everything in combinations. Outcome remains consistant. Lo res error start, can't load nvidia driver, selected but not in use, xorg.conf needs editing.
I'm getting the same error messages as the common nvidia help posts describe but the solutions aren't working for me.
4 days of this, 3 installs plus a shot at Mint, and no progress. I'm pretty frustrated. I'd consider returning to karmic if I didn't think the updates would pork the nvidia driver all over again.
Last install of 9.10 there was a required edit of vmalloc=256M and a shut off of cx18. That's been fixed in lucid? What else ccould it be?
View 3 Replies
View Related
May 7, 2011
I'm having issues installing the nvidia-96 driver package on the new Lubuntu 11.04. I have a GeForce4ti 4200 card and have had that driver package install successfuly on numerous flavors of Ubuntu over the years.
apt-get spits out the following error:
Code: The following packages have unmet dependencies: nvidia-96 : Depends: xorg-video-abi-8.0 but it is not installable Depends: xserver-xorg-core (>= 2:1.8.99.905-1ubuntu3) but it is not going to be installed
Meanwhile, a check of the currently installed xserver-xorg-core through apt-cache shows:
[Code]...
The nouveau driver does work, but I would really like full 3d acceleration like I have had in the past.
View 2 Replies
View Related
May 8, 2011
I have spent ages looking at similar problems but not not quite the same. I have installed 11.4/Gnome (x86) and wanted to use my GT430 card. I went here: 'http://en.opensuse.org/SDB:NVIDIA_drivers' and used the 'one click' install for current cards. All went ok until I rebooted and I got a 'gdm[1239]: WARNING: GdmDisplay: display lasted 0.846578 seconds' message. I got five of these in succession until the 'gdm[1239]: WARNING: GdmLocalDisplayFactory: maximum number of X display failures reached: check X server log for errors' appeared and it popped me down to an init 3 login.
So, I deleted the blacklisting conf file so that I could get back in to Gnome on Nouveau (which I did ok). I then noticed there was no /etc/X11 Xorg.conf file so I ran /usr/lib/nvidia-xconfig to generate one (which it did) - but it made no difference. I am at a loss know after spending 8 hours on this. Any pointers would be greatly appreciated. My machine is still at fresh install state so even if I have to reinstall 11.4 it does not matter.
[Code]...
View 5 Replies
View Related
Aug 10, 2009
I installed F11, before today, I used Ubuntu for a long time. my graphic card is nvs140m of nvidia. I download the card driver from [URL]. the vision of the driver is NVIDIA-Linux-x86-185.18.29-pkg1.run. before I can install the driver, I must close the X-server. so, please tell me how to close the X-server.
View 4 Replies
View Related
Aug 25, 2010
I have installed F13 and after reading some Nvidia Driver installation guides I managed to blacklist nouveu driver. I run the 'init 3' command and it gave me an error something like 'nouveu driver still in use' then I reboot the system and the fonts were bigger than I run init 3 command again and this time installation was completed then I went back with init 5 command. I opened nvidia x server settings I have cloned the monitors and I installed the flash player,totem vs. Than F13 gave me the notification about updates and with yum update command It has downloaded and installed those updates. Then I shut the system off. When I restarted system it does not boot up. I see the loading bar and It hangs on at the end like forever. I have installed fedora again and the process I have done was same so the result.
View 2 Replies
View Related
Oct 30, 2010
a little while ago the file from nv stopped being able to run.. I cant update the driver and now always get this error
4: warning: comparison between signed and unsigned integer expressions
/tmp/selfgz2718/NVIDIA-Linux-x86_64-260.19.12/kernel/nv.c: In function �nv
_kern_read_registry�:
[code]....
View 2 Replies
View Related
Dec 10, 2010
I've followed leigh's installation instructions for the nVidia drivers on Fedora 14, and everything seemed to go smoothly, but I don't see any obvious changes after rebooting (should I?).When I go to KDE's KInfocenter (KMenu -> Applications -> System -> Info Center) and check the driver information I see this:
Code:
Vendor Mesa Project
Renderer Software Rasterizer
[code]....
View 2 Replies
View Related
Feb 25, 2011
how do you install an nVidia video driver?
View 1 Replies
View Related
Jul 23, 2011
The nouveau driver coming with the free fedora does not even allow to run Gnome 3, so I'd like to install the Nvidia driver. So far I did not succeed as the nouveau kernel module is loaded at an early stage. How can I remove the nouveau driver?
View 6 Replies
View Related
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
Feb 6, 2009
After a few days of wrestling the xorg.conf file and the akmods/kmod apps, finally have it running properly with a dual display/one graphic card setup BUT only from init 3 and then startx. Trying with init 5 shows a segmentation fault right after recognizing the kmod driver but the sequence keeps running until it after it hits the anacron OK portion. This occurs with an NVIDIA 6800 XT which is covered by the 180.25 driver. Other forum Q&A suggests the wrong driver but NVIDIA recommends this one.
View 3 Replies
View Related
Jul 18, 2009
I just installed Fedora 11, and am trying to install my video card drivers. I have an Nvidia geforce gtx 260m. So far I have installed both the kmod-nvidia and akmod-nvidia packages, and I still cannot enable desktop effects. After i installed the akmod package, I sometimes see the nvidia logo for a split second when I log out, but my drivers are still not correctly installed.
View 9 Replies
View Related
Aug 14, 2010
The driver has crashed X and before I had a chance to find RPMfusion instructions on dealing with initrd, I removed the package just to keep X running.Uninstalling the package does not restore kernel and Xorg operation. I am still in VESA mode.Although they claim they don't put stuff in non-standard places and use RPM, still there is something left over, as nuoveau driver no longer loads.Now that system configuration is all over the place, it is not clear what they actually changed or replaced.
View 3 Replies
View Related
Apr 4, 2009
Just installed a Sparkle GeForce 8400 GS on my Dell Dimension 2350 running FC9. As stated, every time the system goes to start the card, a stack trace occurs. I know the first thing that everyone will ask for is the output from the stack trace, but for the life of me I can't capture it. Tried grabbing the STDOUT and SDTERR from the 'service start' command, but nothing interesting is ever there. If anyone knows if and where such things get stored, just letting me know that would help. I assumed there would be something in /var/log, but no. For some reason, there's a lot of python errors in the output. I imagine I could try to type in as much of the output as possible, but I'm hoping someone has seen this before.
Anyway, I've tried the Nvidia install executable, the nvidia-newest RPMs, the nvidia-96xx RPMs and they all fail the same way. I also can't get the card to come up as the primary device on boot, which I don't think should be a problem since they all boot into VGA mode, don't they? If I disable the internal video setup in the BIOS, the machine freezes on bootup with blinking lights on the keyboard, which I imagine is the BIOS's way of telling me there's no monitor available.
I also tried getting the nv and nouveau drivers going with no luck. They are installed on the machine, but I'm embarrassed to say I don't know how to get them configured. Not really a driver guy, I guess. Also, the reason I installed this card is to get TVOUT, and I don't know if generic drivers will have support for that sort of thing.
At this point, I'm just looking for a way forward. One thing I remember is that when I removed the 'fglrx' drivers (because they conflicted with the NVIDIA stuff) I remember that a few python/fglrx based packages went with it. I'm wondering if that could be at the root of the failure, given the python errors in the stack trace.
View 14 Replies
View Related
May 8, 2009
I am using fedora10 in my notebook. I installed nvidia-graphics driver as follows.
su -c 'rpm -ivh http://download1.rpmfusion.org/free/...ble.noarch.rpm'
su -c 'rpm -ivh http://download1.rpmfusion.org/nonfr...ble.noarch.rpm'
su -c 'rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-*'
Then i installed kmod-nvidia with yum su -c 'yum install kmod-nvidia' When i tried to open NVIDIA control panel, i got a message that nvidia-driver should be configured. Then i issued the following command as root.
nvidia-xconfig. The i rebooted the system. Now in the boot menu, i see two kernel informations as follows
Fedora (2.6.27.21-170.2.56.fc10.i686)
Fedora (2.6.27.5-117.fc10.i686.PAE)
If i boot my linux with first one, x windows starts, if i boot with the second one (previously default), the x-windows is not opening. Why this happens? So i booted my system with first option in the boot menu. The system booted and x.windows started but i am not able to use any software that uses opengl window. The glxinfo command gives me the following error.
[Code]....
View 3 Replies
View Related
Jun 15, 2009
I am a new user of Fedora 11. I am a Ubuntu user and could not get my GeForce 9100 on board graphics to work on my new computer with out crashing my computer so I decided I would try fedora. I downloaded the driver from NVidia and I am attempting to install it (Fedora didn't automatically find the driver). I get the following message:
"Error Unable to find the system utility 'ld'; Please make sure you have the 'binutils' installed. If you do have the bin utils installed, then please check that 'ld' is in your PATH."
I am running the driver from $Download as root. I don't know what ld or bin utils is or the check if I have it or if it is in my PATH.
View 9 Replies
View Related
Oct 17, 2010
I had installed my NVIDIA 9500GT driver on my fedora 13 by disabling nouveau, so should i enable it back after installing NVIDIA driver?
View 2 Replies
View Related
Jun 7, 2011
Can this be done similar to some other O/Ses so Nouveau doesn't pre-screw up the kernel for 3rd party drivers??? Would be great in F16 if we were given a choice re: wanting nouveau or not. I simply can not get F14 or F15 to work with the 270.xx drivers on recent equipment.
View 10 Replies
View Related
Feb 5, 2009
I am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.
Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.
I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.
Here are my specs:
CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W
It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.
I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.
View 1 Replies
View Related
Dec 8, 2009
Just got the latest kernel update 2.6.31.6-162 for fedora 12 64bit and it won't boot on my PC. I just get a black screen with some text that doesn't mean anything to me. Computer is a s775 E7200 with nvidia 730i/9300 integrated graphics. I am NOT using hardware graphics drivers at the moment, having decided to stick with Nouveau drivers for a time. What system log tools do I need to identify the problem?
View 2 Replies
View Related
Apr 22, 2010
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
View 3 Replies
View Related
Oct 15, 2010
I have been bashing my head against the keyboard for over 6 hours now i just got a brand new asus ul30v it uses Nvidia geforce G 210M.
I went straight to installing ubuntu 10.10 on the whole disc. when the installation was complete i was happy and logged in. only seconds after i logged in i was promted that i was recomended to install a driver for my graphic card, for 3d and such. so i followed the installation and was asked to reboot. so i did. but then ubuntu booted straight into fullscreen terminal.
While being in this terminal i have tried to purge and reinstall GDM amongst endless other things, including rebooting several times.
Not being able to do anything about it, i reinstalled, and repeated the installation of the driver. same story over again.
Bottom line is i have rebooted close to 30 times, and reinstalled over 5 times. ive tried installing from the terminal (excactly the same story). tried to download it from their homepage, then install it (couldn't install it because i had to turn off driver X and "terminate all OpenGL applications", wich i dont know how to do. tried googling it, but ended up worse than before..[url]
Im guessing i cant install the driver at all with ubuntu 10.10? i havent tried it with older ubuntu versions because, of course, i wanted the newest version.
I have barely been using ubuntu before, although i've had it dualbooted.
I have found alot of posts with people getting stuck in terminal on boot, but none of the solutions that worked for them worked for me, probably because they had different problems than me.
View 3 Replies
View Related
Apr 14, 2010
A few days ago I installed 10.04 Lucid beta-2 and it came up OK. I then chose the recommended Nvidia driver "version current", which caused my system to come up in low graphics mode. I removed the driver and the system came up with no X11. I gave up.Yesterday I installed again, hoping that newer updates would fix the problem. The boot is now OK with no proprietary driver activated and all updates installed as of now (April 14, 05:30 GMT).
The Hardware Drivers dialog shows two choices: Nvidia version 173 and "version current (recommended)". Both of these show the status "this driver is activated but not currently in use". The only option offered is the button "remove".
View 4 Replies
View Related
Jul 4, 2011
I just upgraded to 11.04 a couple days ago, and it didn't go smoothly because I ran out of space, so I had to pause it and grow a partition.
When I got done there were several problems. One of them is that my nvidia proprietary driver is no longer being used. I found it in "additional drivers" and activated it, but it says "no proprietary drivers are in use on this system. This driver is activated but not currently in use."
I can run the nvidia control panel just fine, and write an xorg.conf file, but after I reboot the above message stays the same.
My xorg.conf file says to use the nvidia driver. My Xorg.0.log shows the nvidia board coming up what seems to be normally.
The "appearance" control panel doesn't even have the special effects tab anymore.
View 2 Replies
View Related
Jul 21, 2010
I would like to know if anyone has installed the latest NVIDIA driver on Ubuntu 10.04 (64-bit) which is 256.35 (x86_64).
I am currently having some problem (unstable) with the previous release 195.36.31 (x86_64) and am now considering updating; but, am still reluctant because of possible problems during the installation process.
View 6 Replies
View Related
May 15, 2010
I am trying to install the non-free NVIDIA drivers. I have read the guide here [URL] but what they didn't mention is what to do when you have a graphics card that isn't supported in Debian Lenny's repo driver version. I have the GeForce GTS 250, which isn't listed under the 173.14.09 (the stable repo version) supported VGA cards list. The version I need can be found in Sid and Squeeze (195.36.24 currently). If I add the Sid repository, it seems to work but it returns a whole lot of other unrelated package updates and its really annoying since I don't want to change to Sid yet. So how do I keep the rest of my packages under Debian lenny with only the minimal amount of packages to be under Sid.
I tried APT pinning once but the standard '*' won't work unless if it's alone in the 'Package' line. To clarify, a line like:
Package: nvidia-*
would get ignored.
I would also need a list of required packages and dependencies that must be installed from Debian sid to get this to work. The documentation for APT didn't help much. I can usually get around this problem by using the NVIDIA way but then I can't boot into Gnome GUI at all under other kernel versions except the one I compiled it for, unless I use the terminal to restore the Xorg stock drivers.
View 2 Replies
View Related
May 2, 2010
I installed the Nvidia driver. When I click on the "Monitors" package it then asks if I want to use my graphics drivers vendor's tool. I say yes and then it pops up the Nvidia X Server Settings dialog. In that menu it indicates I need to run nvidia-xconfig from root. I did this and then restarted the xserver but to no avail I get the same message every time I try to run "Monitors", that I need to run nvidia-xconfig.
View 9 Replies
View Related
Jun 16, 2010
I wish to update my nvidia driver (I was running 195.36.24 and I want to update to 195.36.31). I followed all the instructions on this thread (http://ubuntuforums.org/showthread.php?t=1467074) and everything went well until this part:
Code:
sudo sh blahblah.run
The error I get in the terminal reads: You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at [URL]...I have no idea how to exit X as it's not in my system processes.I have updated my nvidia driver in the past but have never encountered this problem. I'm running Ubuntu 10.04 on a Dell XPS M1530 if that matters.
View 2 Replies
View Related
