Fedora Installation :: Adding A Ɖ' To End Of Grub Line + Beta --> Production?
Nov 5, 2009
- Off a vanilla F11 livecd install, I stuck a 3 at the end of my grub line to boot into runlevel 3. I have been doing this for as long as I can remember (since Fedora 3). However now it seems to break and gives me a GRUB error. I press e to edit, and delete the 3. BUt it still throws and error?!?!?!?! Has this facility (ie sticking a number at the end of the grub line) been changed and why is my grub line now broken even though I've gone back and deleted the 3?
- If I install Fedora 12 beta now, will yum take me all the way into production when it goes live (assuming no killer bugs encountered), I'm guessing thats a yes?
View 4 Replies
ADVERTISEMENT
May 27, 2009
I need to add Fedora to ubuntu's GRUB Here is my fdisk -l
[Code]....
View 14 Replies
View Related
Jul 22, 2010
I have installed Windows 7 64-bit, Fedora 13 64-bit and Windows XP 32-bit. I had to install the 32-bit XP for some driver issues I have with obscure devices I own. Windows 7 and Fedora both boot with no issues but Windows XP is not the in the GRUB loader as it was installed after Fedora. I have tried adding a few entries to the menu.lst file but my attempts failed. The output of fdisk -l is here
Code:
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[code]...
View 7 Replies
View Related
Mar 17, 2010
How do I reconfigure grub when adding a disk to a machine where both disks have their own MBRs? I have two volumes:Disk 1 - actually mirrored RAID-1 drives managed by ICH9R on the motherboard Disk 2 - a single drive managed by ICH9R on the motherboard, but without RAID. Disk 1 is the "old" disk containing WinXP on the first partition. The MBR of Disk 1 was created by Windows. Disk 2 was built on the machine while Disk1 was unplugged. Disk2 has Win7 on /dev/sda1 and Fedora 12 on /dev/sda7. Obviously, Disk 2 has grub installed on its own MBR.
When I plug-in both Disk 1 and Disk 2 at the same time, I would like to reconfigure grub so that it gives me the option to switch between WinXP on Disk 1, Fedora on Disk 2 and Win7 on Disk 2. (I may also want to install Ubuntu on another partition of Disk 1, but that's a separate issue.) The problem is that when I plug in Disk 1, Disk 1 becomes /dev/dm-0 and Disk 2 becomes /dev/sdc (instead of /dev/sda as when I installed it). (I don't think I can switch this order because I'm worried that Windows will become confused.) So, how do I keep all partitions the same and get them all to work from grub? On which MBR will I need to install grub? How do I configure it to see all 3-4 of my operating systems? Do I fix grub from the Fedora LiveCD?
View 1 Replies
View Related
Mar 6, 2010
I think the pc updated, or at least that is the only thing I can figure. Anyhow, pc froze so I reboot system. I have dual setup, after choosing Ubuntu, I receive GNU GRUB version 1.97~Beta 4 error. I am also told to press TAB for further commands, but none of the commands seem to do anything.
View 5 Replies
View Related
Nov 21, 2009
since i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
View 3 Replies
View Related
Mar 25, 2010
Just update ubuntu to beta 1. When I try to load win7 it just all a get is the blinking underscore in the top left corner. What did i do wrong?
[Code]...
View 4 Replies
View Related
Apr 11, 2011
My current setup was:
4 x 500 gb hard drives in (software / onboard controller) Raid 10 (1 +0) with Windows 7 x64 as the primary OS
1 500 gb hard drive with Ubuntu 10.10 installed
After upgrading to Ubuntu 11.04 Beta, I hit the Grub Error. I have removed the 5th HDD but still getting it on boot into Windows 7. I am currently in the process of copying all files from my raid via a 10.10 flash drive boot (fortunately was able to mount my raid's partitions).
View 3 Replies
View Related
Jun 12, 2009
I'd like to say I'm very impressed with Fedora 11. I'm a long time Linux user and I've tried many distros. But, I usually keep only the best on my laptop. For a long time that was Ubuntu but, I think Fedora 11 has made some key improvements over Ubuntu and I'm eager to switch. The problem is: I haven't been able to run Fedora as anything other than on the Live CD. Everything works perfectly and it installs but, when I reboot, Grub begins. Instead of booting, however, Grub drops into its minimal shell and gives me a command line.
I've tried installing it a number of ways now and have read much about the problems with Ext4 on Grub and took special care to see that Grub has its own, separate, /boot ext3 partition. Even then, no luck. My hardware should work fine. I've got an HP DV-5 with 4GB RAM, AMD Turion 64-bit dual-core @ 2 Ghz, and an IDE 250GB hard drive. I'm working with the 64-bit Fedora 11 Live disc with KDE as the Gui.
View 10 Replies
View Related
May 4, 2010
I am in attempt to add a pvscsi driver into RHEL 6 Beta OS. What I did is followed this:
1. Downloaded the complete ISO into /home/jack/RHEL folder
2. Follow these steps:
#cd isolinux/
boot.cat grub.conf isolinux.bin splash.jpg vesamenu.c32
boot.msg initrd.img isolinux.cfg tmp vmlinuz
call initro memtest TRANS.TBL
[Code].....
View 3 Replies
View Related
Jan 8, 2010
After getting some updates like 3 days ago, I get this message: "minimal BASH-like editing is supported. For the first word TAB list possible command completions. Anywhere else TAB lists possible device/file completions. sh:grub>_
What do I do to boot my system? Previously I was able to select from the grub menu. But not in this case. Any suggestions. I have an XP system as well on the same hard drive. I used wubi to install Ubuntu 9.10.
View 6 Replies
View Related
Sep 15, 2010
I was adding a line in terminal to try to get skype working and i added a line un-necessary and i need to edit the file. How do I either remove the file or edit it. It is a file in etc/yum.repos.d It says that it is read only, and i can't find how to change permissions.
View 2 Replies
View Related
Mar 15, 2011
I've been compiling a lot of games recently and most of them requires me to add libX11 to the linker command line. I can't think of nothing but to take a look at the Makefile and add -lX11. It works, but now, I'm compiling from a git repo, and I know the change will removed once I update the my working copy.To make it short, is it possible to add libX11 permanently to the linker command line?
View 7 Replies
View Related
Jan 3, 2011
I wish to add information to one of my files based on matching IDs,
Here is an example
(the id is the 3 colunm)
(the ID is the 2 colunm)
And the output i wish to be
OUTPUT:
So as you can see the ones that do not match are still present, and the ones that do match just have the extra information from file2.txt added to them.
I thought about using join but that only seems to join the ones that match displays thoes only. i would like all the information in the output file.
View 6 Replies
View Related
Dec 1, 2010
Code:
grub-install -v
grub-install (GNU GRUB 0.97)
I loaded GRUB, and now when I reboot it goes straight into the 'grub>' command line. Initially GRUB had the root as (hd0,2), whereas the boot is on (hd0,1)...(hd0,2) is my '/home' partition, and (hd0,1) is my '/' partition... So on a bootup I ran...
Code:
root (hd0,1)
setup (hd0)
Now when I boot I still get the 'grub>' command line, but now the root is correct.
From 'grub>' I can type...
Code:
grub> configfile /boot/grub/menu.lst
GRUB will then show the menu, and I can click the listings to load them. All's fine, but why doesn't GRUB just load the menu.lst without my prompting? How can I automate this process of typing 'configfile /boot/grub/menu.lst' each time I boot?
View 1 Replies
View Related
Mar 15, 2010
I have added an application launcher to my desktop and it works fine. However, I want to be able to feed parameters to the launcher before I launch the application. So, for instance, if the command is normally "/usr/bin/foo something" I want to be able to add the "something" parameter dynamically after clicking the launcher but before the application launches. Is this possible in Fedora?
View 2 Replies
View Related
Apr 4, 2010
So here's the schedule for 10.04:
April 8th, 2010 - Beta 2 release;
April 22nd, 2010 - Release Candidate;
April 29th, 2010 - Final release of Ubuntu 10.04 LTS.
If I have 10.04 beta 1, could I just continue to update and not have to burn another disk to install? Or do I have to burn the beta 2 and reinstall if I want it?
View 9 Replies
View Related
Apr 21, 2010
I've using win7 and 9.10 for a few months now. Today I decided to install yet another OS, but during installation a new grub was written to the mbr. Result: I can no longer boot Ubuntu.This is what my menu.lst looks like
Quote:
timeout 10
color black/cyan yellow/cyan
gfxmenu (hd0,4)/boot/gfxmenu
default 0
[code]....
I can see and mount my 9.10 partition just fine from the new OS, it's located on dev/sda6.And I'd still very much like to keep using Ubuntu. So, how do I go about editing this file to make it work?
View 5 Replies
View Related
May 7, 2010
I'm trying to add mandriva to grub2 and have difficulties..
Mandriva has it own boot partition on sda1 (ext3) Ubuntu boots in /boot on ubuntu's / partition which is sdb6
Mandriva / partition is: sda5 (ext4)
UUID for Mandriva boot partition is: bf53ebd1-4698-4522-ae0d-f9465aa2f0a3 (sda1)
UUID for Mandriva / is: 658bcd3e-9c69-49c9-8da1-a7e0b9723547 (sda5)
UUID for Mandriva swap is: d3bc2559-4f86-4269-bf25-c99e726c8775 (sda7)
Ive made a file which I have put in /etc/grub.d/ so each time I run update-grub2 it also includes this script.
Code:
echo "Adding Mandriva 2010.1" >&2
cat << EOF
menuentry "Mandrivas 2010.1, linux 2.6.33.3" {
[code]....
It gives error kernel panic, and something with initrd beeing shut down before completion
View 5 Replies
View Related
Jul 16, 2009
How do I add another Windows XP SATA Hard Drive to this Grub menu, on a USB Stick?:
timeout 30
default 0
#
[code]...
View 2 Replies
View Related
Nov 10, 2009
For some reason the fedora grub didnt detect my windows recovery partition (Im on a netbook).How would I go into adding that to grub. Its on /dev/sda2
View 2 Replies
View Related
Mar 27, 2010
I have finally decided to restore grub on my netbook after installing windows 7, and I can boot into UNR just fine but the Jolicloud option is now gone. How do I add it back to the GRUB menu.lst?
View 2 Replies
View Related
Mar 29, 2010
This is no huge problem, but it is rather annoying to me. I am using the 10.4 beta, and whenever I get a large update (like a updated kernel) GRUB adds another boot option to the menu (I'm dual booting Vista and Ubuntu.) So my GRUB menu looks something like this when I turn my computer on:
GNU GRUB version 1.98-1ubuntu2
Ubuntu, with Linux 2.6.32-18-generic
Ubuntu, with Linux 2.6.32-18-generic (recovery mode)
[code]....
View 6 Replies
View Related
Mar 14, 2011
I have been helped by repo in this post [URL]..Here's a quick resume: I made changes in the grub menu for just one boot I selected the first option Ubuntu with Linux 2.6.35-27-generic edited the Linux /vmlinux ro quiet splash by adding irqpoll to the end. I rebooted and the system booted correctly into the GUI.
I then tried to edit the /etc/default/grub file by booting into the recovery mode, opening a terminal, using command sudo vi /etc/default/grub and adding irqpoll to the end of the GRUB_CMDLINE_LINUX DEFAULT="quiet splash". Followed by update-grub to update the /boot/grub/grub.cfg file
Unfortunately when I try to reboot I find that the system will not boot and hangs as before on the purple screen after a logon. I know that I have edited the /etc/default/grub file correctly because I have confirmed this by reviewing the file. So my question is why does the "one boot method" work but the edit file method not work ? I must be doing something wrong.
View 1 Replies
View Related
Aug 18, 2009
I have installed FC 11 on single SATA HDD. When I add IDE HDD grub doesn't load. I see string GRUB at top-left corner only.code...
I tried replace hd0 -> hd1 in grub.conf. But this doesn't solve problem. What I must do?
View 7 Replies
View Related
Apr 3, 2010
I recently installed Windows 7 on Virtual Box (running within Ubuntu Karmic 9.10), and it runs great. However I want to also add Windows 7 to the Grub Menu, so I can choose at the start between the Ever-Glorious Ubuntu and the Depressingly-Drab Windows 7.
View 1 Replies
View Related
Aug 21, 2011
I'm kinda new to Linux. My problem is that a new Fedora O/S entry is added onto grub everytime I receive an update on Fedora (I think). Eg:
Fedora 15 15.40.0-4 ...
Fedora 15 15.40.0-3 ...
Fedora 15 15.38.0-0 ...
Windows 7
How do I stop this? Ideally I'll only have two entries, Fedora 15 and Windows 7 where Windows is set as the default primary o/s to boot up. The current method I use is to fiddle around with that grub file and set default to entry 3, which used to be Windows 7 but is now a Fedora (which means Fedora is now set to default boot up).
View 4 Replies
View Related
Jun 15, 2011
I have a fedora 15 beta installation medium , can I upgrade to the stable version after installation ? is this the same as hitting the update manager or is there any thing special I need to do
View 2 Replies
View Related
Nov 20, 2010
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies
View Related
Jan 31, 2009
Originally I had Ubuntu running on my machine. I installed windows beta 7 with a working dual boot. Get everything working in grub again. I decided to give Fedora a try and wiped my Ubuntu partition and installed Fedora. Everythings all good...except the reconfiguration of grub has left out my Windows 7 partition (nothing out of the norm) I tried manually adding windows 7 to /boot/grub/menu.lst but it's not working, when I try to boot into Windows 7 i get a little flashing "_" for a really long time and nothing happens.
View 2 Replies
View Related
