Fedora Installation :: 10 Doesn't Come With GCC And Make?
Jun 6, 2009
I know this sounds weird but the Fedora 10 I installed doesn't have gcc and makefile in it. I burned a CD from fedora.org and could it be the problem with the CD I burned? During installation, it didn't ask me to choose what packages I wanna install.
I don't know much about live CD but this installation procedure is different from my previous experience. It firstly take me to a 'virtual' linux desktop and I started the installation through clicking a Installation icon on it. Is this what so called live cd installation?
View 7 Replies
ADVERTISEMENT
Jun 15, 2009
I'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
[code]....
View 3 Replies
View Related
Feb 9, 2009
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
View 2 Replies
View Related
May 26, 2011
i installed the new fedora 15 x86_64 version at my dell studio 17 laptop any i wanted to make some updates and suddenly one error show up
Code:
GPG key retrieval failed: [Errno 14] Could not open/read file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-free-fedora-15-x86_64
i know i�m missing a key... but how can i get it? i did:
Code:
cd /etc/pki/rpm-gpg
ln -s RPM-GPG-KEY-rpmfusion-free-fedora RPM-GPG-KEY-rpmfusion-free-fedora-15-primary but i still doesn�t work
View 9 Replies
View Related
Aug 23, 2010
The announcement of several new make scripts in the 2.6.32 release notes is very exciting.Most people uses the kernel shipped by distros - and that's good. But some people like to compile their own kernels from kernel.org, or maybe they like following the Linux development and want to try it. Configuring your own kernel, however, has become a very difficult and tedious task - there're too many options, and some times userspace software will stop working if you don't enable some key option. You can use a standard distro .config file, but it takes too many time to compile all the options it enables.
To make easier the process of configuration, a new build target has been added: make localmodconfig. It runs "lsmod" to find all the modules loaded on the current running system. It will read all the Makefiles to map which CONFIG enables a module. It will read the Kconfig files to find the dependencies and selects that may be needed to support a CONFIG. Finally, it reads the .config file and removes any module "=m" that is not needed to enable the currently loaded modules. With this tool, you can strip a distro .config of all the unuseful drivers that are not needed in our machine, and it will take much less time to build the kernel. There's an additional "make localyesconfig" target, in case you don't want to use modules and/or initrds.
View 1 Replies
View Related
Nov 20, 2010
I have some problem with yum. When I use yum to make cache,it looks like doesn't work at all.Just like this:
Code:
[root@localhost ~]# yum makecache
Loaded plugins: presto, refresh-packagekit
[code]....
View 12 Replies
View Related
Jan 18, 2011
Make menuconfig doesn't find ncurses headers on my system, howerver ncurses-devel package is installed. I get the following error message:
Code:
make menuconfig
*** Unable to find the ncurses libraries or the
[code]...
View 3 Replies
View Related
Feb 1, 2011
I'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
View 3 Replies
View Related
Oct 7, 2009
I have already downloaded and installed the latest version of Adobe Flashplayer...
Quote:
But flash still doesn't work - there is no flash plugin in Firefox plugin list also.
I've tried to close-open Firefox, log out-log in, reboot - nothing.
OS Fedora 11 x64. I don't know, what am I doing wrong?
View 4 Replies
View Related
Aug 17, 2011
So I want to install the original version of Fedora 15 and make it dual boot with my Windows 7. Problem here is that I don't have a cd/rom. and the iso file didn't have a .exe thingy.....
so now what? Also this is my partitions> http://img94.imageshack.us/img94/9853/unledtlh.jpg
View 4 Replies
View Related
Jul 12, 2010
I use ubuntu but i want to install fedora.How to make dualboot with ubuntu and fedora?
View 4 Replies
View Related
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
May 4, 2009
How do i make a rescue CD
View 5 Replies
View Related
Jun 3, 2010
I am running fedora 12.
It works very smooth in my system.
My system configuration is given in my signature.
When i am trying to install fedora 13 64 bit after that anaconda screen i am getting a screen of blue background and the rectangular small installation screen .but the problem is that nothing is there in that screen.It is completely white and the system stands there for ever.
How can I install fedora 13?
View 4 Replies
View Related
Oct 17, 2010
I have a machine with win xp on the first drive, and I had ubuntu on a 20 gig partition on the second drive. I installed Fedora 13, choosing the replace existing Linux system on the install options. This blew out my MBR and grub would give me an error 17, I couldn't even get into Windows. So I looked read some of the posts on here and figured out how to fix the MBR in windows, by starting off the install cd, typing fixmbr. That fixed windows, and now that starts. So I also read how to fix grub, saying I should should start up off the Fedora disk, I chose Rescue installation, start shell. I type in # chroot /mnt/sysimage. I typed grub-install /dev/hda and it says command not found. When I restart, windows automatically boots, and doesn't give me an option for Fedora.
View 2 Replies
View Related
Jan 20, 2009
I'm trying to install Fedorad 9 on my windows Vista dell xps laptop in a seperate partition. I can't seem to make my laptop boot off of the DVD i'm burning the Fedora ISO to. I'm just using Windows, not Nero or anything like that. I've changed the boot options in setup, burned the ISO to the DVD and rebooted but I end up in Windows. By the way, should I just go ahead and use Fedora 10 as a new user or has it been "debugged"? I don't need any additional "new version" problems at this point.
View 2 Replies
View Related
Jul 28, 2009
I am trying to install F10 on my old p3 machine. It has 40GB HDD. I am installing only one OS on this system. So please recommend me partition scheme which will be helpful for home purpose.
Second thing is I don't need default gnome login manager as it takes long time. So please tell me how can I install light weight login manager ( I will be using LXDE as desktop environment ).
View 5 Replies
View Related
Dec 14, 2009
how to make several logins when installing Fedora?? Should I do it while installing the operating system or after that (like in Windows)?
View 2 Replies
View Related
Aug 5, 2010
I run several OSes (all Linux) on my computer. I set a separate partition for each one. I want to run Fedora 13 LXDE mainly for a game or two that are in the Fedora repos but not in any others, so I will not need a lot of space. But I want to make sure there is enough room for the OS.
I want to be able to play CloneKeen, so I will need enough space for that. I may find some other games, as well, so I will need some extra space. I have my other two OSes on six GB apiece, and Peppermint actaully uses barely half of that. Will 6GB be enough for a basic Fedora install with a few games installed? I will not really use Fedora for anything else, probably.
View 4 Replies
View Related
Mar 29, 2011
Can we migrate to make version 3.81 in Fedora 14? make 3.82 is made available in make Fedora 14 which has compatibility issues with make files of 3.81 version.
View 3 Replies
View Related
Jun 2, 2011
I was a windows user and am new to unix. I did not want to format the drives as I don't want to lose any data. Installation was successful but I am taken straight to Windows OS selection screen.
Here are some data that may be helpful:
HDD: 2TB partitioned to 9 drives ( 1 ext4, 1 swap and 7 NTFS drives) code...
I tried fixing grub, but when I type "root (hd0,11)" , it says - it has exceeded the cylinder limit of BIOS. I need help in getting fedora up and running.
Please note that formatting or altering the current drive structure is NOT an option for me. I bet there is a work around to this problem.
View 5 Replies
View Related
Feb 28, 2009
I decided to switch from Ubuntu to Fedora Core 10 KDEdual boot installation worked perfectly... all smooth!untill i got to installing things....i wanted to install ndiswrapper, so i manually downloaded it on my second pc and transferred it trought a USB stick to the Fedora PC. When reading the 'installation manual' it clearly uses the "make" command a lot...problem is; bash error: "bash: make: command not found"So i google this and i get some solutions, all involving online repositories...so basically... i need internet to get the MAKE rpm, and i need the MAKE rpm to get the internet working... :')I tried searching online repositories but i haven't got a clue about what i need to download from there (to get the make command, or the "Development Tools") and how to install it on my fedora pc....i need help :P It would be much appreciated if someone could explain me how i could get these important packages up and running on my system with manual downloading and installing.I haven't got a clue how to do this manually... I've been on it for hours allready and I'm getting a bit fed up with it I can't understand why such an important package isn't standard included in the installation.
View 14 Replies
View Related
Sep 21, 2009
I try to play a simple movie in avi format. The codec is called AC-3. I tried several tutorials, now i stuck with a "local file conflict between packages" when i run the auto install with movie player. I try now VLC Player ... With VLC it works! Open from the Administrator panel - Add or Remove Software than search for VLC and tick the main stuff and install.
View 14 Replies
View Related
May 14, 2010
Recently I tried to install Fedora 12 x86_64 to my laptop. I ran the live fedora image from my cooldisk and then pressed "Install to Hard Drive" from live desktop. Then I went forward until I reached the partitioning section. Though I had ~28GB free space in my Harddrive, but it says: "Could not allocate requested partitions: not enough free space on disks." You can see my steps until reaching this problem in these 3
pics:
step1:
step2:
step3:
I captured these steps by using Fedora 12 Live printscreen tool. I tried to install Fedora12 from its non-bootable DVD too, but no difference! So there's only 2 situations:
1. I did something wrong -> install Fedora and use its partitioning tool.
2. There's a bug in Fedora -> confirm that this is a bug and say me an alternative way to install fedora.
View 3 Replies
View Related
Dec 24, 2010
New 320 Gig HD. Installed FC14 from DVD and it worked, except there are no icons at all to get started as there were in FC 13. Cant find "Places", "Applications" that were at the top of the screen. Now it's blank except for the splash design. Tried to re-install, but it won't do that. Just goes to the HD and the same blank splash screen. Thanks for the help. Please be easy with explanations as I'm new at this.
View 14 Replies
View Related
Jun 3, 2011
I downloaded the Fedora-15-i386-DVD.iso and want to install Fedora 15 from it. I don't want to use the LiveCD version since it doesn't have all the packages. So I follow the tutorial given here under the section titled "How to Make a bootable USB Drive to Install Fedora instead of using a physical DVD ". Everything finishes off well. However. when I boot my computer using the USB, it says "USB doesn't have operating system. Safely remove and reboot".
Now, what to do? I also didn't get the line the tutorial saying, "You should now have a bootable USB stick which will run an 15 install. When you boot the stick, you may also add askmethod to the boot line and select a hard drive install and select the drive as /dev/sdb1 (or your USB device drive) and the path should be / " What am I supposed to do?
View 1 Replies
View Related
Apr 15, 2009
su to root,
init 3
no errors, no nothing acts like it take the command, but nothing happens.
trying to install nvidia drivers which won't run unless all the xwindows are shut down.
View 4 Replies
View Related
Jun 14, 2009
I did an upgrade using preupgrade program and it went very well. However, I have lost my HP 1020 printer. Can anyone assist with this. I tried to use HPLIP-Gui, but it doesn't even see the printer at all. The other problem is that I get the following message when trying to use Yumex:
Failure getting http://rpm.livna.org/fedora/11/i386/...ta/repomd.xml:
13:09:06 : --> [Errno 14] HTTP Error 404: Not Found
13:09:06 : Trying other mirror.
13:09:06 : Failure getting http://livna.cat.pdx.edu/fedora/11/i...ta/repomd.xml:
[Code].....
View 11 Replies
View Related
Jun 20, 2009
Nvidia either works or it doesn't work under Fedora 10 64 bit OS. I have re-installed Fedora 10 64 bit and Fedora 11 64 bit 10 times each and it's getting real old. I keep erasing my system because Nvidia doesn't want to work. Leighs post does no good on this issue and neither does anyone else's or else it would work.
View 2 Replies
View Related
Aug 24, 2009
i've downloaded and burn the live cd of690MB, ISO format, 1 CD-ROM disc image for Intel-compatible PCs (32-bit) I am trying to install on my desktop which runs on phenom,it just doesn't bootbut on the other hand on my thinkpad laptop it works...
View 3 Replies
View Related
