I have been trying unsuccessfully to install fedora 10 or 11 on my older PC. I have trieddoing a text install with acpi=off and i8042.nomux but with the same results. The installation sticks indefinately at the anaconda load. CTRL-C works, so it's not a hardware freeze.
Hardware:
Pentium 3 500Mhz Slot1
130 or so MB of ram
2 Maxtor IDE drives
CDROM 56x
Riva TNT2 video 128
Running VirtualBox 3.2.6 under some host OS (should be irrelevant which one, right?), I created a machine, intending to install Fedora 13 on it. Got the Fedora 13 Live CD iso image, and an 8.6 GB virtual hard drive, completely blank. I set the machine to boot off the Live CD image. The Live CD boots nicely and I get to its desktop. I open "Install to Hard Drive"...and nothing happens. No error message, zip, nada. Inspection of the system shows a series of odd file systems, but I have no clue what they are for and whether they're usable or not.
The sticky [URL] mentions that the blank virtual hard disk should be partitioned and formatted beforehand...So I did, using the Live CD's Disk Utility (Applications: System Tools: Disk Utility). Although the sticky states the small /boot partition should be ext2 or ext3, the Live CD installer proposes to reformat it as ext4. Shouldn't we have formatted it as ext4 right away, then? Also, the installer set the /boot partition's size to 524 MB, not 200 MB as recommended by the sticky.
OBSERVATION: This was not easy because VirtualBox sets the display to 800x600 at most, and the Disk Utility spills beyond those confines WITHOUT PROVIDING SLIDERS. It was sheer luck that the required buttons (create partition, format partition) were barely reachable (at the bottom edge of the screen). This is a serious problem, because increasing the VirtualBox display size can only be done *after* installation (see for instance[URL] - since this guest addition requires rebooting the guest OS, it probably won't stick to the Live CD).
Once those two partitions are prepared and the virtual machine rebooted, "Install to Hard Drive" works as expected.
OBSERVATION: It is absolutely inexcusable that the Live CD installer (Anaconda?) does not propose to do this partitioning and formatting for the user. It is even more inexcusable that it should fail without giving any feedback whatsoever to the user.
Aside: VirtualBox's guest additions does not work correctly (for 3.2.6 anyway). The Devices: Install Guest Additions menu merely mounts a CD image VBOXADDITIONS_3.2.6_63112) without any feedback (expected feedback because the menu ends with an ellipsis). The CD, once opened, has an Open Autorun Prompt button...which fails to do anything. Manually running autorun.sh also fails. I had to manually invoke VBoxLinuxAdditions-x86.run from a terminal to get anywhere. Even then I was unable to go higher than 1024x768.
When I attempted to install 64-bit Fedora from my DVD, it failed while installing packages with the unhandled exception:
"
Traceback:
File /usr/lib/anaconda/users.py, line 163, in setRootPassword, self.admin.setpassUser(rootuser,cryptPassword(pass word,algo=algo),True)
File /usr/lib/anaconda/instdata.py,line 171, in write,algo=self.getPassAlgo()
[code]...
I know Python quite well but I have no idea why None is being passed as the first argument to self.admin.setpassUser when a non-None value is needed. The other curious thin is that the trace does not show the call to setpassUser() from the entry after it but rather to 'getPassAlgo(). Needless to say this but has kept me from installing Fedora 11 on my 64-bit machine.
When tried to install Chromium from add./remove programs, the following error crops up
Dependency resolution failed: A package could not be found that allows the action to complete:
libicui18n.so.40()(64bit) is needed by package chromium-.0.252.0-0.1.20091119svn32498.fc11.x86_64 (chromium)
libicudata.so.40()(64bit) is needed by package chromium-.0.252.0-0.1.20091119svn32498.fc11.x86_64
I just completed the latest updates to Fedora 14 - I have mono and wine on the system as well - so they were also updated. Now the only screen I can get is the failsafe (bash).
How do I recover my KDE desktop? (I noticed there were some updates for the KDE as well). I suspect something has failed during the update (selinux was also updated).
P**sed right off now, tested this upgrade on two test systems before hand to make sure this would work.Upgrade my server from FC9 to FC10, it had two Encrypted XFS volumes on totalling 1.5TB of files which I don't have space to backup anywhere else.Have now upgraded and the Encrypted volumes are showing as not existing "volume name does not exist"
View 2 Replies View RelatedBFO install via USB[URL]..I get through all of the initial menus, and to the main installer, after which is says "starting installation" (this is perhaps 2 hours into the installation). About 3/4 of the way through I get a dialog: "The file libssh2-1.2.4-1.fc13.i686.rpm cannot be opened. This is due to a missing file, a corrupt package or corrupt media. Please verify your installation source. If you exist, your system will be left in an inconsistent state that will likely require reinstallation. Reboot or Retry"
[screenshot attached] I have clicked retry several times and it doesn't continue. I have previously had no problem installing Fedora 13 beta with the same hardware.
I had a power failure during the portion of the upgrade after the reboot where it was upgrading the packages.I tried restarting the machine with the upgrade line in the bootloader but it says it cant find the bootloader. So I rebooted into the working install and ran preupgrade again, and after it reboots, it gives an error the it cant find "root" of the previous installation.even thought the machine boots and works, I cant tell what state I am in. the boot option lines, shows a fc12 kernel designation and the "about this computer" says "release 13"Also the add remove software doesn't show anything.
View 12 Replies View RelatedI was having problems performing an update yesterday that failed on dovecot dependancies and after a few tries I removed dovecote (it wasn't being used) from the installation and tried again. Everything seemed to be going OK then the update (about 160MB) hung and the screen went black a few times and I think then shutdown automatically. The PC then fails to reboot and displayes the message "Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)" I have tried to get the PC to boot with the super grub disc but without success (probably my in experience) I have also tried a suggestion from one of the forums to start the PC with a live CD and typed su -c 'grub-install /dev/sda at the terminal again without sucess. I have looked at the files with the live CD there are grub, menu and kernel files there (some are in lost + found, b ut don't know wheer these should be so have not changed anything.
Is there an easy way for the in-experienced to repair the boot process ?
The PC is a pentium 4 running Fedora 13
There is a 200MB boot partition formated as Ext3
and a 19GB partition formated as a LVM with Ext4
There is a CD drive but no DVD
Everything has worked OK for the past year through two online upgrades.
I have followed the Nvidia driver guide exactly. I did not see any errors during the four-step process. However, on the last reboot the system gets as far as the fedora "f" on the startup screen and hangs. This appears completely fatal. I have tried the procedure a couple of times now and the result has been to reinstall Fedora 14 from scratch each time. I have been able to access the system files after the crash using the system rescue option on the installation disk. I am on the Gnome X86_64 installation. My graphics card is NVIDIA GeForce GTS 240.
View 14 Replies View RelatedI,ve tried upgrade from F14 to F15 using preupgrade, but I run into serious problem. Preupgrade downloaded all packages without problem and prompt me to reboot. After reboot installation process went ok. It was upgrading cca 1650 packages. But installation hung around package 1600 (almost on end) with message that openjpeg-devel-1.4-6.fc15.i686 cannot be installed and only option to end installer. After reboot I ended up with "kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(0,0)". It is still possible to enter grub menu, where I can choose upgrade to F15, but it fails again on that openjpeg-devel package. When I enter terminal after failure, I can see package is downloaded in preupgrade repo (and after moving somewhere else and running upgrade again it I got message that package is missing). Is there any possibility to skip this package installation or only option is fresh reinstall?
View 10 Replies View RelatedJust to reiterate on the title, the installation of Fedora 10 i386 (DVD) on a 32bit PC. Is failing on me after the media check (whether or not I do it), so not even making it to the language selection. Currently running a nvidia AGP video card was previously using an ati PCI card but swapping has done little to help.
The only argument that lets me passed this point is noprobe, which then fails a bit later as it can't pick up the install media. I've also tried a live CD which seems to be a bit hit and miss as to whether or not it even loads. It then either fails to even let me run the install to HDD or it comes up some error about failures in python code (Don't have the exact error as the last few times haven't even booted). Below is a couple of errors I get from the standard installer
[Code].....
My laptop died while installing F12, without completing installation. Now I can not boot the computer from HD, CD, or USB. I have flashed the BIOS with the most recent ROM. I can access the BIOS setup and exhausted all my options there, which is mainly boot order. At the moment, the boot process goes to a blinking cursor and does not allow for input. The laptop in question is a lenovo Y510 that was previously running F10 with a single partition.
View 2 Replies View RelatedI just installed Fedora 12 on HP Pavilion (dual boot with Windows vista). I made it all the way through the installation and created my user account. A few seconds later I got the login screen asking for my password. I enter the password and get "Authentication Failure."
The name that shows up on the login screen is my full name, not the user name that I created. Is that wrong?
I have installed fedora 14 in my computer. I installed some applications from root. I created a user id. I am unable to install my internet (broadband connection) now. every time it shows the error "Authentication failure" "install from root" something like that. How can I switch between user and root. Or how can I login as root again?
View 1 Replies View RelatedBeen running Fedora for a while now, iterating up through versions to 12. Decided to to a clean install upgrade to 14. Apparently, bug mistake. Everything seems to be progressing fine, but after 'transferring install image to harddrive', the 'Starting Install Process' fails withsystem-config-lvm-1.1.15-1.fc14.narach.rpm cannot be opened.I have no idea what to do with this. I've reburned the install disk a couple of times (and checked the HASH) -- no apparent problems with the install media.Tech details: x86_64 install on a multi-pro box with a 3ware raid 5 controller (5 disk). I've never run LVMs. Two simple hard partitions (/ and /home). Fedora 12 installed with no problems (as did every other version of Fedora <=12).---------- Post added at 12:29 PM ---------- Previous post was at 11:54 AM ----------Some additional information:1 tried Fedora 13 -- wouldn't even recognize my disks. Installer hung at trying to find basic storage. Not a good sign2 tried my old Fedora 12 install DVD -- again, worked like a charm. Expect that F12 repos are now closed.
So, it seems as if some 'change' between F12 and F13/14 has made some part of the install process choke on my 'hardware' (I'm guessing something related to 3ware RAID card). ---------- Post added at 01:51 PM ---------- Previous post was at 12:29 PM ----------I just tried CentOS 5.5 (x86_64). Also installed fine. For some reason, Fedora >= 13 absolutely won't let me get past the problem noted in the OP. I suppose I could go with CentOS (for long EOL support), but I need some of the newer compiler/dev libs in Fedora 14 for some projects I'm working on.
I downloaded Fedora 15 Live and Fedora 14 Live to try to see where Linux is for music and broadcast audio on a laptop. It turns out I have to use 14. 14 and 15 both sort of work as live out of the box, although why they ship with the common Broadcom wifi driver missing and the touchpad tap disabled beats me. I also never found the magic button to close down 15. There must be one, but blow me I couldn't find it. Then I tried to follow the instructions at [URL] which mostly seemed to work. I need to keep Win 7 as this is the 32-bit test machine. I used EasyBCD v2.1 rather than the older version the guide is written for.
Booting into Win7 at first worked, then a boot into Linux stopped at a line that said something about a kernel thread helper Then Win 7 blue screened on boot, although it would boot to Safe Mode. Removed Veriface from the Lenovo laptop and it would boot Win 7. Tried setting Drive in EasyBCD to "Boot" rather than "C:" for Fedora. Now booting Fedora gave a Windows missing file message and croaked. Repairing startup with the Win 7 boot CD cured Win 7. Repeated the loop with the same failures. Re-partitioned and re-installed Fedora and just the same - a screen of text that stops. I can now boot to Windows and need help to sort out the Linux boot. How do I start to investigate the screen of text saying things like "__bad_area_nosemaphore" ?
I have failed to install an AT&T Sierra Wireless Aircard 881 on a Compaq 8510p running RHEL5 Server (Linux version 2.6.18-164.9.1.el5,gcc version 4.1.2 20080704, Red Hat 4.1.2-46. )
As seen in the dmesg output below, the OS detects the modem, connects it to ttyUSB0 - ttyUSB3. However, kppp is unable to access the modem.
I have followed Sierra Wireless instructions located at sierra wireless's website. (I would post it, but I've not made enough posts yet to link it in this message.) However, I was not able install the TRU-Install patch. The unusual_devs.h is absent on the machine, so patching was unsuccessful.
I'm stumped on what to try next. Is there a FAQ or guide on how to get a 3G modem running with RHEL5 Server? Ideally, I'd like to find something like the Internet Connection manager on Ubuntu. The modem works on that distro with no problems. I'm not able to migrate due to application and security certification dependencies on RHEL5 Server.
lsusb output:
Bus 009 Device 001: ID 0000:0000
Bus 008 Device 002: ID 1199:6851 Sierra Wireless, Inc. AirCard 881 Device
Bus 008 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 007 Device 001: ID 0000:0000
[Code].....
I just upgraded via preupgrade-cli (from FC10), rebooted, the upgrade process completed, then the system rebooted and I just see a blinking white cursor now.I was able to boot up from a live cd of FC11, but I'm not sure how I can repair the system.
View 14 Replies View RelatedI'm running a P4 system with Dual ATI Radeon 2900HD Graphics cards. When I try to install F11, the graphical interface fails to start and I end up in a text install. I've seen plenty of information on how to fix the problem post install, however I'm not nearly advanced enough to then continue the installation (the text install does not install much, particularly doesn't install the graphical interface). Is there a way to work around this (IE a more complete text install, or somehow getting it to install in graphical user interface?)
View 2 Replies View RelatedI am a newbie to linux and having a hard time installing drivers for my card (gtx 260). I'm following this guide: [URL]. So do you edit the grub.conf file in etc first and then do the yum install kmod-nvidia? I've gone through this a few times, and each time when I think I've followed the steps and reboot, I get nothing. A blinking white cursor once and then a bunch of texts saying failure to mount and sleeping forever another time.
View 2 Replies View Relatedi have a netbook compaq mini with a sata toshiba hard drive.XP was installed on this machine until the hard drive started to have bad blocks.Then i bought a mypassport500go to install f14 on it.It worked but know the sata hard drive is more and more faulty.When i try to boot f14 it displays :acpi : package has zero elements. So i cannot boot.I tryed rescuecd, does not work either.i tryed many kernel params to disable sata at boot but it seems to be builtin.there is no option in the bios to disable the hard drive.
View 8 Replies View RelatedI've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
I'm a long time Linux user. Finally got around to upgrading my Fedora 11 system to Fedora 12 by using the 'preupgrade' tool. The upgrade appeared to go well (downloaded packages, rebooted into installer, etc). However, now that the upgrade is complete, I'm unable to boot my system.
Here's my configuration:
/dev/sda (80Gb)
200Mb /boot partition (ext3)
52Gb / partition (ext4 - managed as logical volume)
2Gb swap partition (managed as logical volume)
20Gb /spare partition (ext3 - managed as logical volume) .....
All worked fine under Fedora 11 for the last few months. Grub now presents me with 'Fedora' and 'Windows XP' boot options. The /boot/grub/menu.lst file is essentially the same as it was for Fedora 11, except for the different kernel versions, etc. The boot sequence shows the Fedora bubble (??) and gets about 80% full when the screen goes black and the message displayed is:
No root device found
Boot has failed, sleeping forever
If I boot Windows, all works fine.
Am able to boot using a SystemRescueCD disk. The disks all look okay and I can mount/modify all partitions, etc. The grub menu.lst file read as follows (sorry, typed in, not copied):
default=0
timeout=10
splashimage=(hd0,0)/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.32.11-99.fc12.i686.PAE)
root (hd0,0) .....
After loading all the apps I use last night with a working FC14 x86_64, I powered up this morning and nothing happened after starting atd.1 try an alternat kernel same effectstart in init 1, OK go to init 3 OKran startx .. failedlook for xorg.conf.. no fileNow if Iwas still running mandriva , I would have typed mcc and bought up the control panel so I could have sorted out the Xorg problem, or tried. There really needs to be something like this.I found that gdm was not installed so installed it.It will now boot up to the login screnn, but wont accept my passwd.restart in init 3, login as root and add another user and set the password for that user.I also rest my passwd as welll.boot up again and get authentication failure on both users, and I cant login as root as someone removed that feature.
Also I can't use Ctrl-Alt -backspace to killl X so I have access to CLI so I can login there and run startx.I suspect several gnome packages have been removed/lost as I use lefthand mouse settings and the mostsetting are back to default.All I have is a live CD to gain access to the forum, and I only have one computer.There really needs to be a fallback to one of the smalll DMs on fedora so in situations like this you are nt forced to use CLI, thats if a new user would know how to access it. As there is no bootsplash, you have to already know to hit return and wait for the bootsplash.
IMO this a is a seriouss flaw, in what otherwise is a good OS.In the meantime I'll try and install XFCE to get X running, but I will need some help getting gnome back.I'll load gnome-panel and see if yum will pick up the rest as depemdencies.I hope this isn't a bug, as to lost the DM after the first machine power cycle is fairly drastic---------- Post added at 08:52 AM GMT ---------- Previous post was at 08:18 AM GMT ----------I resorted to yum install gnome-*which loaded 255 packages, including gnome-desktop, gnome-common, all the gnome applettsThis wasn't just one or two packages corupted, it was removal of the DM altogetherSimilar effect to running "rm -rf gnome-* "
I insert my F14 CD and booted the computer; I see the beginning of the installation and the the screen goes black and says:
No root device found.Sleeping forever. Boot failure.
I have a fresh computer with specs as such:
Hard Drive: Western Digital Caviar Black 500Gb 6Gbs Sata
Asus Sata DVD/CD Burner
Core i3 3.3GHz Sandy Bridge chipset
MSI P67A-GD55 Motherboard
Zotac GTS 450
I have a problem where the live cd gives this error message:
Boot failure, sleeping forever.
I'm new to this system and trying to install plug-ins but I always seem to get some sort of rejection..
[root@localhost haley]# yum install vlc
Loaded plugins: langpacks, presto, refresh-packagekit
[Errno 14] curl#6 - "Couldn't resolve host"
Trying other mirror.
Could not retrieve mirrorlist...^... error was
14: curl#6 - "Couldn't resolve host" .....
Error: Cannot retrieve repository metadata (repomd.xml) for repository: rpmfusion-nonfree. Please verify its path and try again [root@localhost haley]#
So then I checked to see if I had rpmfusion-nonfree, and I do. I really have no idea what to do, I have spent hours trying to get this work. I want to be able to open any media file, avi, wma, mp4, etc.'m using Fedora 15.
After having tested Ubuttu 9.10 on a VM with Win XP Pro as host and running both Ubuntu 9.10 and 8.04 from a CD/CDR drive I decided to do an installation of 8.04 on a separate HD and import files.Installation seemed to work OK, but on reboot: no menu was shown to choose OS and the machine booted directly into Windows.Tried to boot directly from the "Ubuntu" HD in the BIOS boot menu and get the message "MBR error" full stop literally.The Ubuntu hard drive is no longer recognised in Windows , can't be acessed from the DOS prompt and obviously cannot be reformatted from there.Just for the record, I'm not totally excluding operator error from the cause
View 9 Replies View Relatedinstalled ubuntu 10.04, i possess the BSNL EVDO AC8700 , i downloaded the package for the same from the zte website but when i try to install it its giving the following error
"
(Reading database ... 123335 files and directories currently installed.)
Preparing to replace crossplatformui 1.0.27 (using .../CrossPlatformUI-V1.0.27-B
[code]....