i am running Fedora 14 32 bits and have an problem with the soundvolume the sound is too quiet i have checked alsamixergui and the volume is 100 % but the sound is very soft. I have the following soundcard/chip:00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)have someone any idea how to configure the sound that it plays louder.
View 5 RepliesHow can I get louder sound?Usually all soundcards work right out of the box with ubuntu, but it seems that the volume is not as loud as it should be, even with all the settings to max.
View 6 Replies View Relateddebian 8 64bit
How do I enable louder than 100% in sound settings?
I have been using outlook for years and i like the agenda it has. but i m tired of windows so i want use linux everywhere , for now i use ubuntu only at home , but at office , windows xp.
So this is my problem when i have an appointment it should have more annoying alerts or some windows that will pop up al the time til i click on it. i dont want to forget anything. also when can i get pluggin to add or something? i could download any plugins from here and i dont know to to install them.
[url]
openSUSE 11.2 64bit
libxine1 from Packman
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Maybe it's just an Amarok2 problem, but whenever another app (for example Konversation) plays a sound file, the audio instantly cuts out (in Amarok2) and will not come back unless I quit Amarok2 and restart it.
Amarok2 has only the options - "HDA ATI SB VT 1708S Analog" or "PulseAudio" (which is NOT installed).
alsa-info here - [URL]
Also I am totally confused by the mixer, it has so many knobs that I am totally lost!
here's a lovely pic - [URL]
After a fresh install of opensuse 11.2 I followed the multimedia guide to install mm-support. Sound is working, results in xine are excellent. Compared to 11.1, vlc now plays sound with drops about every second. To be more precise: sound is ok for several seconds, then a first drop appears. Thereafter the time between the following drops slowly shortens. After a minute or so, the drops come in intervals of about a second.
View 5 Replies View RelatedUbuntu login sound plays 4 times in a row.
View 2 Replies View RelatedAfter updating from these repositories
Code:
#### Debian Backports - [URL]
deb [URL] squeeze-backports main
#### Debian Multimedia - [URL]
## Run this command: apt-get update && apt-get install debian-multimedia-keyring && apt-get update
deb [URL] stable main non-free
#### Google Linux Software Repositories - [URL]
## Run this command: wget -q -O - [URL] | apt-key add -
deb [URL] stable non-free main
#### Google Linux Software Repositories (Testing) - [URL]
## Run this command: wget -q -O - [URL] | apt-key add -
deb [URL] testing non-free
#### Skype - [URL]
## Run this command: gpg --keyserver pgp.mit.edu --recv-keys 0xd66b746e && gpg --export --armor 0xd66b746e | apt-key add -
deb [URL] stable non-free
#### VirtualBox - [URL]
## Run this command: wget -q [URL] -O- | apt-key add -
deb [URL] squeeze contrib
#### Wine - [URL]
## Run this command: wget -O - [URL] | apt-key add -
VLC started to playing only the audio and not the video, I tried setting the video preferences but all video outputs didn't work. How do I get my video back.
I've tried walking myself through all the sound help threads, but I am not having any luck. Sound was fine a few days ago. But now I get nothing. I uninstalled and then reinstalled both alsa and pulseaudio... and their respective mixers bounce around like they recognize sound is being made, but nothing comes out of the speakers. sound does work in windows so the speakers aren't blown. nothing is muted to my knowledge... alsa and pulse mixers are not on mute. output is set to Internal Audio and not HDMI stereo, though I never know which profile to be using.. i've pretty much tried them all to no avail. results of aplay -l
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: STAC92xx Analog [STAC92xx Analog]
[code]....
I'm using a new acer laptop 7736G with x64 ubuntu 10.04.Sound plays through both headphones and speakers when attached. When I use alsamixer and mute either the speaker or headphones, both of them mute.When I alter the volume of the 'headphone' column, nothing happens.If you need any more detail about my sound card etc I can go find it..
View 7 Replies View RelatedI'm on Kubuntu 9.10, using Totem to play .wmv files, and certain of them cause the player to search for an audio codec (wmap?) that is never found. The video played without audio after that. So I followed advice to remove ~/.gstreamer-0.10, and reboot. A new .gstreamer-0.10 directory appeared, but now, Totem will not even play the video. It recognizes the audio codec however. The video codec shows up as "Windows Media..." but resolution is 0 x 0, and nothing ever appears in the window. I tried uninstalling and re-installing w32codecs and non-free-codecs, and removing the registry files under ~/gstreamer-0.10 and using gst-inspect to rebuild the database,
but nothing helps.
When I try to play a divx movie online using firefox (my system is ubuntu 8.04) the movie plays but there is no sound.
View 1 Replies View Relatedi have a problem with sound. Previously my on-board sound controller was identified automatically and worked flawlessly. But now I don't have any sound in the system with the only exception of Xine-based applications (Xine itself, Kaffeine-xine and Amarok still play fine but all other software is silent)Have anyone had this problem before.I'm using Debian Lenny stable with KDE 3.5.
View 3 Replies View RelatedI installed Ubuntu to a flash drive and it worked all dandy like. However, on other computers the audio doesn't work, neither can I install a driver for the graphics card to use effects and (at least so it seems to me) run 3D games. Is it trying to use the same hardware that it did on the first computer I used and therefore hasn't installed the right stuff?
EDIT: I can 'play' music, so I think the codecs are fine, but no audio comes out, so I'm thinking it must be a driver problem.
EDIT2: Apologies, I checked the "Comprehensive sound problems solution guide" and was able to fix the audio simply by unmuting the speakers. However, the graphics problem remains.
One other tid bit that might be relevant is that the first time I booted up on a different computer it did tell me (in different wording) that the graphics might have trouble because it was set up for a different hardware system, so I told it to set up a new configuration and that seemed all dandy.
I am having some problems with recording with my laptop. When I try to record something through the laptops mic, usb webcam mic or with desktop recorders audio record feature all playback is too fast (sounds a bit like alvin and the chipmunks :L ) Is anybody else having this problem, or even better know how to fix it ?
Sorry if this has been asked before, I'm running 10.10 and had never tried recording before I upgraded to 10.04. I had the same problem in 10.04 though.
I got a 5.1 desktop sound sys for my recently built gaming rig. It sounds great. On Windows, that is. In ubuntu when I'm playing music, primarily when the subwoofer plays the bass, the speakers sound like they're farting and ripping phone books in half. Also, they get very statticy and sort of quiet. In sound preferences, analog stereo duplex is selected, if that's of any value. How can I get good sound playback in ubuntu?
View 1 Replies View RelatedI have just upgraded my box to be more multimedia friendly and one of the upgrades was to improve the sound card. I decided to get the Asus Xonar DX pci-e card. I have it working but the speakers are not plugged into the front output socket as the xonar dx only plays sound from side surround output. Will the sound be any better from the front out on my 2.0 speaker system or is the sound being directed out of the side surround out full quality? How to overcome this discrepancy?
View 8 Replies View RelatedI just installed wheezy and upgraded to jessie. I had previously gotten sound working in wheezy by installing the flashplugin-nonfree and flashplugin-nonfree-extrasound packages, after configuring my headset in system settings. However, now I can't get sound to play in firefox. I've installed flashplugin-nonfree, flashplugin-nonfree-extrasound, and pulseaudio, still without luck. The volume is turned all the way up in alsamixer, sound tests play fine, and I can play music in VLC without any problems. This leads me to believe it's not a problem with drivers, but with some package I'm missing that will allow firefox to play sound. Sound wasn't working in the default video player either, before I installed the flash plugin. Is there something I'm missing?
Also, sound doesn't play on Konqueror either (KDE browser), which seems to indicate it's a problem with flash and not with firefox itself. After removing the flash plugin and installing pepperflashplugin-nonfree to ensure the pepper plugin was used instead of flash, sound still would not play in chromium, so I reinstalled the flash plugin and still don't have sound in any browser.
The only thing really missing from this install is this issue with the sound. I've searched all over the forums and i found one thing where you get the model and codecs and write them to a file, however, I can't seem to find what my "model" is because none of the postings have anything about Lenovo laptops. Here is the command they all asked for:
Code:
With that info, how do I get the model, and how do I get my speakers to stop playing when headphones are plugged in. Also, I don't have any software installed like pulse audio either, so it's not that.
I have a problem with trying to capture sound through the input jacks on my computer. The sound plays through from the inputs to the output, and it's volume is controlled by alsa mixer, but no programs can pick up the stream, including the PulseAudio and Gnome Volume controls.I have tried many of the suggestions to be found in these forums for sound issues, including removing Pulse, configuring the model in alsa-base.conf, and messing with every setting I can find.Here are the outputs from the commands from the troubleshooting guides:
Code:
lspci -v | less
00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio
[code]....
I recently installed ubuntu and installed amarok and tuxguitar, both of them have no sound. Amarock just skips all the mp3s i want to play, and tuxguitar just plays without any sound, no error message or anything. I ran these both ot of the applications menu, not terminal (I dont know how to run them out of terminal).
View 5 Replies View RelatedI just finished installing 10.10 on my pc. the problem is that i cant login to the desktop i enter the password, the login sound plays and im stuck looking at the wallpaper. nothing else. i tried logging in safe mode and it worked. how can i get it to work normally?
pc specs:
Pentium 4 2.6 ghz
512mb ram
ati radeon 9600 graphics card
And i installed it using wubi.
I have Ubuntu 11.04 installed on my Toshiba Satellite C655 laptop. When I plug my headphones, they sometimes work, they sometimes don't, but that's not the main problem. When they do work, sound also plays out of the speakers. The only solutions I was able to find were for earlier versions, which don't work for 11.04.
View 9 Replies View RelatedI have a directory that contains a bunch of sound directories containing WAV files.I want to make a script that plays one, waits 500ms, plays one, waits, etc.i tried cat `find . -name *.wav && sleep 1` > /dev/dsp.It plays them but with no delay between.
View 13 Replies View RelatedI have configured my sound drivers many times. After doing this i am able to listen a sound. But after booting there is necessary to configure them again. So is there a any way for permanent configuration.
View 2 Replies View RelatedI am running Ubuntu remix on my Asus Aspire Netbook. When watching movies on Video player and VLC I get good loud sound on music in the movie but I can barely hear anything when people talk ... background music and sounds are way louder than voices. I know these files work because I watched them before when I still had Windows XP on my netbook.
View 3 Replies View RelatedSince kernel update 2.6.40 Totem plays video like in Fast Forward (no sound). Reverting to 2.6.38 solves the problem.
View 3 Replies View RelatedI installed VLC on F11 and it worked but after i updated F11, the video was smooth but the audio from VLC seems to have screwed up. I went to ..... and tried some vids, nothing's wrong and F11 still plays the usual system sounds. I have deleted and reinstalled VLC but to no avail. Unforunately, i did not know what i updated as there were just too many updates and i just acepted them all, maybe i shld not do that next time
View 3 Replies View Relatedhow to install programs, that i downloaded onto my windows XP computer,and they are for linux, i downloading it off a site.i just need to learn how to install it,and i need to find a media player that plays FLV files, as well as MP3 files, with the codec preinstalled,or how to install codecs.im sorry im really new to linux, i was considering switching to Mint, is that any better for media?
View 9 Replies View RelatedI'm having a really random intermittent fault with video files... all kinds... and also happens with different media players... they lock up the entire system but when i reboot they'll play fine...could this be the graphics card? it's a Sparkle Nvidia Geforce 9500.... is there any reccomendations for a suitable replacement that doesn't cost the earth... I'm looking at starting 3D animation too, so was looking to upgrade anyway...there was some kind of error that randomly popped up once or twice when it was playing files...
View 2 Replies View Related