I have grub 2. I want to load a file from grub. When list of OS appears when Computer load grub, I want to choose some option and load a file. I want to load a file called sda.mbr which is placed in /sda.mbr I added in grub
Code:
title test root /sda.mbr but nothing happend.
I know how to add entries to grub2, (in 40_custome). Problem is how to edit the entries. The commands.
I would like to modify the boot loader settings and triedo open the file grub.confHowever, it is said that the file could not be opened, as seen in the attachment.Tried to authenticate as 'root' before opening the file, but the problem still exist...
View 10 Replies View Relatedi am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies View RelatedI'm trying to set up some shares on this pc and every time I try to edit the /etc/exports file I get this error. I get the same error when I try to edit /boot/grub.conf file or any other files. Does not matter what editor I use. I'm running f14.
View 3 Replies View RelatedI have 2 harddisks 1 tb and 160 gb. In 1 tb fedora is installed. In 160 gb windows is installed. 1 tb is the master. 160 gb is not being detected. How to edit grub.conf file to edit the menu?
The content of grub.conf is
# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You do not have a /boot partition. This means that all kernel and initrd paths are relative to /, e.g.
# root (hd0,1)
# kernel /boot/vmlinuz-version ro root=/dev/sda2
# initrd /boot/initrd-[generic-]version.img
#boot=/dev/sda
default=1
timeout=5
splashimage=(hd0,1)/boot/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.35.6-45.fc14.i686)
root (hd0,1)
kernel /boot/vmlinuz-2.6.35.6-45.fc14.i686 ro root=UUID=bfc7d406-5ae3-4335-a2d8-37472dcfa7dc rd_NO_LUKS rd_NO_LVM rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet
initrd /boot/initramfs-2.6.35.6-45.fc14.i686.img
title Other
rootnoverify (hd1,0)
chainloader +1
I recently installed a 64-bit version of centOS 5 alongside a 32-bit version, which I use. Turns out the 64-bit version absolutely will not boot and I'm stuck with it as my default boot option. Since the grub being used resides on the 64-bit half, I cant edit the menu file but I know theres a way to do this without it, through grub itself. I have about 29 render nodes now with this problem, and whenever they need to be rebooted I have to hook a monitor up to each one and hold its hand through the boot process. How to change the grub menu through grub itself, basically just change the default boot option and then have it stay that way?
View 5 Replies View Relatedafter doing an upgrade to 10.4 and updating grub I get this message. how do I address this
[Code]...
since i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
I just recently installed a kernel, everything works fine after reboot except. When I use nano -w /boot/grub/grub.conf I get /boot/grub/grub.conf: No such file or directoryIs there something i have to do after installing a new kernel in Gentoo Linux.I can't access my /boot all that appears there is a symlink to /boot How can i see my kernels located in /boot.
View 3 Replies View RelatedI've set up a triple boot xp, vista, and fedora 10. The problem is that I want to remove Fedora grub, so the bios can give me all 3 choices to boot from, be it xp, vista or fedora. At the moment fedora grub boots, from there i am able to choose other operating systems. But I want to use windows boot loader, from there i would like to have windows give me the choice of different OS's to boot from.
View 9 Replies View RelatedThe new GRUB2 was supposed to configure itself from the old grub, but got the kernel image partition wrong.I have booted from Knoppix live cd, but need to write to system files. I have searched, and found several suggestions that apparently work on Win machines, but RO permission for root on Linux is a harder nut to crack.
View 4 Replies View RelatedWhenever I try to boot my computer, GRUB (Version 2) says "File Not Found". It does this for all entries except the Memtest86+ entries, which work fine. I have tried reinstalling GRUB, but it still does the same thing.
View 6 Replies View RelatedI am trying to change the default boot in grub to the last OS, and cannot find the menu.lst file under the /boot/grub directory.
I have tried to use the locate command to find the menu.lst file, but it doesn't exist. I have grub 1.98 installed and was wondering if the file I need to edit might be under a different name.
I recently updated Ubuntu to 10.04 (lucid) Kernel linux 2.6.32-27-generic gnome 2.30.2
I did an upgrade and now getting grub error 15 file not found on boot, memtest runs ok. any help would be appreciated. system information is listed below:
Find /grub/stage1
hd(1,0)
Menu.lst
[code]....
I have XP, Win7 Pro and F 11 installed. Before I installed F 11, Win 7 boot mgr was working fine. I then installed F 11 and I went to System/Admin/bootloader to edit it and it wouldn't bring up the boot loader. In the attachment was the error msg. Now my only option when I boot up is F 11.
I do not have access to the Win 7 DVD only the F 11 install disk since I am on a fishing trip and need to use Win 7. How can I repair to the grub boot loader to boot into Win 7?
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I've recently left Windows behind for good and have come to Linux (Ubuntu.) However, I've run into problems after trying to dual boot windows 7 and ubuntu. When I restarted my computer, I got a black screen with white text reading "Minimal BASH-like line editing is supported". I have the Ubuntu live cd and was able to try Ubuntu without having to install it, but after I put in a flash drive with Windows 7 on it, the Ubuntu CD has stopped working entirely.
The weird thing is, the computer that I installed Ubuntu on, already had Ubuntu and Windows 7 on it. And every OS was booting successfully. The reason I deleted the Ubuntu that was already on the computer, is because there were many different versions. I wanted to do a clean sweep and only have Ubuntu and Windows 7 installed on the computer. I know that if you try to dual boot Windows 7 and Ubuntu, Windows will overwrite the GRUB file, making it unable to dual boot.
I've setup raid to my primary partition by starting up from an USB. Array was up&working. Now starting up from my HDD's, I get: error: file not found. grub rescue> what should I do here?
View 1 Replies View RelatedI tried making some changes to /boot/grub/menu.lst file by logging in thru su but it throws following error:
[root@localhost avi]# /boot/grub/menu/lst | gedit
(gedit:4874): GnomeUI-WARNING **:
While connecting to session manager:
Authentication Rejected, reason : None of the
authentication protocols specified are supported and host-based authentication failed.
bash: /boot/grub/menu/lst: No such file or directory
I am trying to change to boot order in grub, but I keep running into the same problem.I find instructs me to go to /boot/grub/menu however that file doesnt exist on my computer. in my /boot/grub directory file names go from memrw.mod to minicmd.com with nothing in between.I am using an up to date release of Karmic Koala.
View 2 Replies View RelatedI am unable to get a knoppix poor mans install to boot using grub and opensuse 11.3. I have tried the same method on another box, same opensuse 11.3 and it boots fine. However, no matter what partition I put the knoppix files in on the problem box, it is the same error. I also have several opensuse kernels listed in the grub menu that were added when the kernel was updated, so the knoppix grub entry is off the screen. I have to down arrow to list the knoppix entry. I read that with this kind of error using ubunto as the host system, that running update-grub will force grub to look for bootable kernels and add it to the menu of boot choices. Does the same fix apply to opensuse 11.3? I have two versions of puppy linux working on this box as a poor mans install, so I am at a loss why it will not see the knoppix kernel. Can it be a problem of too many kernels listed in the menu.lst file? This box is a live update from opensuse 11.0.
View 13 Replies View Relatedwe have an oracle application server on red hat 4.6 upon booting it comes up with error: attempting boot from hard drive (c GRUB)
View 2 Replies View RelatedI previously had Ubuntu installed on my MBR. I deleted that partition (32 GB), resized my Mac partition back up to (250 GB), and then reduced it to 200 GB and created a new one with 50 GB via BootCamp to install Windows 7 from a DVD that I burnt (I got a Windows executable from MSDNAA that I used with Wine to obtain the ISO image. Insert rant about having to download Windows with a Windows executable here.).
I've tried burning two different DVDs. I used Burn on my Mac to burn a data DVD+R with the HFS+ and Joliet filesystems (I think) and then tried again with the ISO9660 and UDF filesystems. The latter has not shown any signs of working besides mounting on OS X. The first DVD would not boot whenever I held 'C' down at time of boot. So I went into BootCamp and clicked "Start Installation". It restarted my computer and this is where the real confusion comes up. I think that it tried booting via the empty partition. The reason I say this is that there are remnants of GRUB and when I boot, I get a screen that says this: error: unknown filesystemrub rescue>
did a Fedora 12 installation today but Grub wont boot XP. I had WinXP on the first partition. It's a 40gig hd. 20/20 for both Linux and Windows. XP on the first partition. How do i map XP using Grub
View 1 Replies View RelatedWhat file would I need to access to change what OS grub boots up to?
View 2 Replies View Relatedopened the system>administration>bootloader guior anything just opened it)now on boot I get a timeout with an option to go to the grub configuration or boot my one and only installed versionwould really like to get rid of that and go back to booting straight to my only fedora version installed without the option to go to grub (might be useful someday, but now is not the day
View 2 Replies View RelatedI just installed F12 from DVD onto drive D: (C: has windowsXP on it)
EDIT: Forgot to mention that drice C: is SATA, drive D: is IDE
Drive D: doesn't appear in my boot options in bios. :EEK:
When I boot my PC, it just goes straight to windows without a grub menu.
Is this easily fixed or will I have to re-install?
I don't get a boot menu when the system boots. I've commented out the hiddenmenu from grub.conf . Is there something else?
View 13 Replies View Relatedbelow files is got from the winpe iso.
Quote:
return@debian:~/winpe$
return@debian:~/winpe$ tree .
.
|-- FQBOOT
| |-- FQDOS.IMG
[Code].....
Some time ago I migrated from one hard drive to another one. The old hard drive contained Windows XP and two Linux partitions, a GRUB 2GB partition and an LVM Fedora partition. To migrate, I first partitioned the new drive by hand amd then performed a simple dd copy partition-wise, IIRC. (Well, that was like a few months ago ) Here is the corresponding new fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
[code]....
Now in GRUB, I have this:
rootnoverify (hd0,0)
chainloader +1
And XP wn't boot. All I get is a flashing cursor in the upper left corner and that's it. The same partitioning scheme with the same GRUB line used to boot fine on the old hard drive.
