Fedora 6, Realtek 8139. Gnome graphic let me assign with
system-config-network
I was using private 192.100.1.10 and click ok. After I run ifconfig and take 169.254.195.57 (look like auto assign). Is there another method to assign IP?
I haved "yum install"ed a few fixed fonts, e.g. bitmap-fixed-fonts, but they do not show up in the xlsfonts listing, and hence, I assume, for the same reason "xterm -fn 9x15" complains that the 9x15 font is not found. The fonts are delivered as pcf files. I have followed some directions on the net, but have not been successful at having the pcf font files integrated into the Fedora 14 font system.
View 8 Replies View RelatedI have an ADSL connection without a fixed IP address. Is there a clever way of finding it out so that I can log into a local IMAP server from the Internet without phoning up to ask for the IP address?
View 4 Replies View RelatedQuestion: Where is the config file to set fixed IP in Fedora 11?I have some machienes in a classroom which I want to be able to clone. This meens I can manipulate the ifcfg-files to a fixed IP.This workes fine, but...I have 2 wireless routers (one normal and one 3G) and when I connected to the second one (3G) I used the GUI (click on the network-connections-icon in the top right corner/Connect to hidden SSID/Connected.Now I get connected! I then edited this connection using the GUI and set a fixed IP. This also works fine So what is my f problem
I want to restore the config-file for this connection from the partition that is not cloned. But where is it? I have used grep to find the SSID and the IP without any luck. Basically I wonder where are the files that make up the GUI-connections??
When I install Fedora 10 on a new system, I let it default to DHCP. Later, I change the system to a fixed IP address by running system-config-network, selecting eth0, clicking on "Edit", clicking on "Statically set IP addresses:" and filling in the blanks. Is it possible to accomplish the same thing using commands that could be entered in a script? I assume one of them would be
Code:
ifconfig eth0 address XXX.XXX.XXX.XXX netmask 255.255.255.0
I have connected my computer to network. Computers in network have dynamic ip address which is assigned by ADSL modem's DHCP. Besides this I want to have static IP address for same NIC. So is it possible to have both static and dynamic IP address for single NIC? If so how can I assign it using command and also in GUI?
View 7 Replies View RelatedI can print a specific line of a file with:$ sed -n '20p' myFileHow can I store it in a variable (in a shell script)?(I wasn't successful with "myVar=sed -n '20p' myFile" for example)
View 2 Replies View RelatedJust Installed Fedora 10 on Dell PowerEdge 2950. Installation went fine. Problem is I cannot Assign a Ip address to eth0. Service "NetworkManager " dies on its own "ifconfig eth0 192168.0.8/24" works though.
View 6 Replies View RelatedI'm at the point where I don't know how to assign certain things for the partitions. When I was on windows I took out 25gbs out of my primary hard drive for Fedora. I also have a 200mb partition. I know I need to put the 200mb partition as the /boot but what do I put as the 25 gb one? I'm using the create custom layout.
View 5 Replies View RelatedEvery time I upgrade my system I run a post install script. This script made some harm to the network start that prevents sshd from starting, but I was unable to detect the problem. In my boot.log I found this:
[...]
Starting NetworkManager daemon: [ OK ]
Starting Avahi daemon... Jun 2 14:58:48 Antares kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
[code]...
So there is a "bind to port 22 failed" probably caused by "eth0: link is not ready", but after the sshd init script fails the eth0 is ready...
Im running samba on fedora core 7, im abit new to the server part of fedora, i set up samba and it runs well, only issue i have now is resolving permissions( User Rights)i have a shared folder which has alot of files and many subfolders in it, the files and folders in this shared foldr were copied from our old Novell Server through samba, i need to assign permissions to this folder where by a defined usergroup can have full read and write permissions to all the files and folders and sub-folders in the shared folder. i tried doing it in GUI but i realized there were over 1000 subfolders.is there a command i can run in the Terminal to help me assign the permissions?
View 1 Replies View RelatedI noticed that my internet connection wasn't automatically brought up each time I logged into Fedora so I opened the system-config-network tool and edited my network adapter by checking the box marked "automatically start at boot/login." To my surprise, the connection went down and upon trying to click on the device to let the manager bring up the connection the greyed-out phrase "device not managed" appeared underneath the device name and wouldn't allow me to connect.
Even when I used ifconfig/dhclient to get the connection up nothing happened. I could get the router to assign an IP address through DHCP, pinged a few sites to make sure it was legit, but still couldn't use firefox to browse anything. Seems as if network manager GUI is conflicting with command line attempts to bring the network up. I'd like to permanently disable system-config-network if possible because it's acting screwy!
Is there a way to use dhcpd to assign vpn clients their IP and configuration?
I'd like to have dhcpd listen on br0 (already set as 10.0.0.1) so that devices conecting through eth1 and tap0 (should I be using tun?) will get the same address pool.
i am using linux redHat 5 and fedora9 How can assgin disk space quota to particular user suppose i have 4 users
user1
user2
user3
user4
All four users have a each folder
/data/folder1
/data/folder2
/data/folder3
/data/folder4
i want to assign space limit/restriction of 100MB on each on folder.
I installed few fonts in fedora. but after rebooting, fedora boots up but returns to run level 3. Showing an error: "Can't load 'fixed' font". error. I checked the /etc/inittab, the runlevel is defined as default 5. I think its the font problem, But i don't know how to reset & get back the 'fixed' font.
View 2 Replies View RelatedI've been asked to create a Linux build which will contain open source vmview. Simple enough, but I would like to have this deployed onto different desktops from an imaging server using multicasting, we use Symantec Solution Suite 2.5 therefore the smaller the image the better for us. I would also like the image to be fully manageable i.e log in and add / remove apps etc but all it will need is a user account, a root account, web browser, rdesktop and vmware view open client.
I have gone down two routes:
1. There are Live-CD's out there that can do the important things that I want which is to use vmware view and I do like the fact that it is compatible with all our current hardware so I am happy to use this for the time being but I hate the fact that we have to boot it from CD as we have quite a few PCs in the room. I would like to convert the distro to boot from HDD exactly as you would from a CD but cannot seem to find a solution to this.
2. I have created a Debian and a OpenSuse build which does exactly what I want albeit taking a bit more disk space than I would like, but my issue is how do I capture and deploy this to different hardware as our imaging server only does cloning.
I'm trying to do this:
Code:
deb [URL] lucid partner
Then update:
Code:
sudo apt-get update
Then this:
Code:
sudo apt-get install sun-java6-jre sun-java6-plugin sun-java6-fonts
The last code when entered says I have a broken package that needs to be fixed. The terminal tells me to enter the code below to fix the broken package but nothing changes. I still have a broken package.
Code:
sudo apt-get -f install
I need an answer asap,so, did nvidia-96 legacy drivers get fixed(won't make system stuck at splash)?
View 1 Replies View RelatedI attempted to install the package kubuntu-desktop on my Ubuntu 9.10 system. I then decided I didn't want it so I used this command to get rid of it. It errored out, the output of which follows.
Code:
Building dependency tree
Reading state information... Done
[code]...
I would like have a password for accessing my web site which works fine. I also want for the specific site to allow access only for a specific range of ips. Right now the following config should forbid my access, as my ip is different from 200.200.200.*
View 6 Replies View RelatedTrying out EasyPeasy on an ASUS. The windows are fixed - no way of moving or resizing them, so drag'n'drop is not possible. Is there a fix, or should I change to Peppermint-2?
View 1 Replies View RelatedSo this morning I just upgraded my laptop from OpenSuSE 11.2 to 11.4. I am using the Gnome Desktop (2.6.37.6-0.5-desktop #1 SMP PREEMPT 2011-04-25 21:48:33 +0200 i686 i686 i386 GNU/Linux).
As of right now the "Taskbar" at the bottom of the desktop, does NOT stretch all the way across the bottom (meaning it would start on bottom-left edge and go to the bottom-right edge) of the screen. Right now it is sort of centered at the bottom, and its size changes depending on how many windows are open.
So is there any way to set it to a fixed width (by that I mean I want it to take up the entire bottom of the screen x-amount of pixels high, etc..
first of i'm a total noob at Linux / Ubuntu but i still want to learn more about it and stop being a windfag .Anyhow. i first of installed Ubuntu 9.10 and then updated to Ubuntu 10.(04?). and everything was running smooth and good. but when i started my com the next day i got some broken files that was broken. I thought "Okey.. I'll just go to the "Broken Fixer" and get it over with" and i went in to the broken fixer and like marked all and everything stared to update. i went of and got me some coffee and got back to my comp and got this error.
Code:
E: /var/cache/apt/archives/ia32-libs_2.7ubuntu21_amd64.deb: subprocess dpkg-deb --control returned error exit status 2
[code]...
Our router is pretty old and only capable of giving fixed ip and there is no support for IPv6. Via the gnome networkmanager I try to set a manual IP to 192.168.1.123 and a netmask to 255.255.255.0 and a default gw at 192.168.1.1 . However, this does not work.
If I open a terminal and type:
Code:
sudo ifconfig eth0 inet 192.168.1.123
sudo route add default gw 192.168.1.1
Then I get a perfectly valid connection to the internet.
ifconfig by it self returns:
[Code]....
ffor me it seems that the gnome network manager doesn't save the information that I gently ask it to.
I can fix it with the CLI commands, but I would like to know whats going on.
was just curious if this bug has been acknowledged by the ubuntu developers and if so, what priority has it been given?
View 5 Replies View RelatedFor some time, I've had DSL and used Fixed-IP internally. I moved, no DSL, no cable, no nuthin' but dial-up and flaky cell-phone modem. Ugh. Along comes American Recovery and Reinvestment Act providing funding for making high-speed internet available to those of us in the boonies; no up-front or monthly equipment costs, affordable monthly changes, whoo-boy, that's for me. Installed, works, bada-boom, bada bing.
I have three servers, a network printer and a large format pen plotter that have all happily played together with fixed-IP for years connected via a Linksys BEFSR41 router and CAT-5 or CAT-6 cables and I do not want to screw around with DHCP (and the printer and plotter don't particularly like DHCP in any event). The servers talk to each other with SSH, their names and addresses are in /etc/host and all has been well with the world. DSL connected with PPPoE, HughesNet connects "automatically" to the modem with DHCP. I also have a switch available for additional LAN stuff as needed. Of course I had to do a hard reset of the router when setting up HugheNet (right back to infancy).
I do need to have DHCP enabled in the router for the limited occasions that a Winders thing gets connected to it (not my box, I don't mess with it).
Now, the actual question: is there any setting in the router that will enable fixed-IP, ignore DHCP leases unless the server is running DHCP (like a Winders box) and not bother me with screwy lease addresses that override my fixed-IP addresses? My servers are running Slackware 13.1, all configured with fixed-IP, all configured to "know" each other via /etc/hosts, /etc/resolv.conf has DNS Server address in it (and DHCP is not permitted to overwrite /etc/resolv.conf.
I have written a program which uses port 5000. I need to restrict other programs use this port when I'm not running that program. In Linux are there a mechanism to restrict port 5000 accesses from other programs.
View 2 Replies View RelatedAre there a way to set fixed maximum processing power to a process.For example a program called 'X' uses cpu in high speed. I need to set this 'X' process to to run with maximum 20% of cpu usage at any time.
View 4 Replies View RelatedI am running a fresh installation of RHEL 6 box and it shipped with Openssh 5.3.But, /etc/ssh/moduli file doesn't exist even in this new installation and the SSH log warns as below:PHP Code:WARNING: /etc/ssh/moduli does not exist, using fixed modulusDoes this imply that it is using the same random number for key exchange purpose ? Also, does it impose any security risks
View 2 Replies View RelatedI am using xterm as my default term.Now, I want to use xfce-terminal as my default terminal, but I cannot configure the font in xfce-terminal to use fixed font used with xterm.I tried to do it from the preference menu, but fixed fonts were not shown there.
View 1 Replies View Related