The internal wireless is not being detected, so I bought a DLink Nano. In following the driver install guides I receive the following error when trying to create drivers;
make
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.35.12-88.fc14.i686/build M=/home/username/Downloads/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.201011
[code]....
having a weird problem with my wireless connection on a Dell Latitude E6400 laptop.This machine has a Dell 1510 half-card. It uses a Broadcom chipset.I've gotten to the point where fedora sees the card, and I can create wireless connections. But every time I try to connect to a network, it scans, connects, and disconnects several times, until it gets a completely bogus IP address, that has nothing to do with any of the networks onnect to. It is always "10.42.43.1", yet I have no static configuration for that address.
Code:
# lspci|grep -i wireless
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN
[code]....
I recently installed KArmic Kola on my DELL E6400 - 9600 INTEL PROCESSOR, 4GB RAM, NVIDIA GRAPHIC QUADRO 160. I have the following issues which is making me nervous to work on the system
- System keeps crashing - all of sudden the Caps button LED, NUM LOCK LED keeps blinking and system freezes for a while and restarts
[Code]....
I have recently installed Ubuntu 9.10 in my Dell Latitude E6400. Everything works great except that I cannot disable the built in microphone. I have even disabled from the BIOS but the mic continues working, this is really annoying as I do lots of calling from this computer for my work.
I have played around with the alsamixer and the sound preferences but I haven't been able to disable it or at least lower its volume.
My headset is plugged in to the mic jack and it works fine. The problem is that both the headset and the internal mic are working at the same time.
I had a Dell E6400 laptop with a nVidia controller. Is anyone know how to set it up to a dual monitor?
View 2 Replies View RelatedI have installed several flavors of Linux on this box Ubuntu, Mint and a few others so I figured I would try the most challenging disto Slackware 13.37... I had not trouble getting through the install but when the system boots it just shuts down at some point during the boot process.
View 3 Replies View RelatedThe wheel is acting as a middle mouse button and clicking. But the scroll is not working
View 3 Replies View RelatedI am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
I have a strange problem with my laptop and need your help in resolving it...i am using a Dell Studio XPS 1645..i have got everything working except the wireless.. and the real problem here is that the wlan detects the network but does not connect to it and will keep on looping back and forward doing the same thing again and again..I am using Opensuse 11.4 with Gnome 3 Shell..here is details of the commands that i tried using to fix the issue
# lspci
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
[code]....
I am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
I am trying to get wireless working on a brand new Dell M6500 that has an Intel Centrino Advanced-N 6200 wireless device.
Why RHEL5.3?
Sponsor requirement
Why not contact Redhat?
Perhaps I will but I do not think they will support this package since they do not distribute it.When trying to install iwlwifi-1.2.25: this is what I get when running make.
Code:
# make
Checking kernel compatibility in:
/lib/modules/2.6.18-128.el5PAE/source
grep: /lib/modules/2.6.18-128.el5PAE/source/net/mac80211/sta_info.h: No such file or directory
grep: /lib/modules/2.6.18-128.el5PAE/source/net/mac80211/kcompat-delayed_work.h: No such file or directory
grep: /lib/modules/2.6.18-128.el5PAE/source/lib/hexdump.c: No such file or directory
[Code]...
I need an .inf and I don't have the software that came with the pc for the wireless driver. I already installed ndiswrapper.
What can I do next does someone have the .inf file I need ?
I installed openSUSE 11.4 in my laptop as dual boot.But wireless drivers are not working.Please give a suggestion to work wifi.
View 3 Replies View RelatedThe network icon and sound icon disappeared from the panel all of sudden one day while i was using ubuntu 9.10 and the network got disconnected. It used to work fine before when i was using ubuntu 9.04 and even after i updated to 9.10, but then that happened. I added the notification area back to the panel but now ubuntu cannot even find any wireless networks. When i connect a LAN cable to my laptop the internet works fine, but the wireless networks area in the network icon is grayed out and it doesn't show any wireless networks. I'm using a Dell Inspiron 600m laptop and my network card is Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05).
View 9 Replies View RelatedI'm running Ubuntu 9.10, Dell Inspiron 1545. I have the NDISwrapper installed, and the driver shows up in "Hardware Drivers" as activated (Broadcom STA wireless driver) it also shows up in "Windows Wireless Drivers" (bcmwl6) but it still won't allow me to connect wirelessly.
View 9 Replies View RelatedI am having trouble in getting the wireless up in Ubunto 10.04. Under Wireless Networks it says "wireless disabled". I have a dual boot with Windows 7, installed Ubunto with the help of Wubi installer. My laptop is Dell Inspiron 1545, with a 64 bit architecture.I have already done checking and enabling the wireless driver by going to System- Administration-Hardware Drivers and choosing Broadcom STA driver.
View 7 Replies View RelatedI have spent all day trying to wireless network to work on my Dell Inspiron 1440, but no luck.
I followed the guide here: [URL]
Here are the details of my network card:
root@bruparel-Inspiron-1440:/home/bruparel# lspci -n | grep 14e4
0c:00.0 0280: 14e4:4315 (rev 01)
Here are the more verbose details:
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f69fc000 (64-bit, non-prefetchable) [size=16K]
[Code]....
Things seem to install fine, but the wireless network remains unavailable (wireless network is disabled).
If someone can walk me through the trouble-shooting process, I tried the solution suggested in the sticky at the top too but no luck.
I've recently partitioned off a section of my hard drive to run Ubuntu from and I'm having trouble with the network connections. In my device manager of Windows 7, it lists that my network adapters are
1. DW1520 Wireless-N WLAN Half-Mini Card
2. Intel(R) 82577LM Gigabit Network Connection
Is there something I'm not doing right in order to allow me to connect to a wireless connection? Are these devices even enabled in Linux systems?
I have a problem with my laptop Dell Inspiron 1525 wireless on Jessie Cinnamon.
I have installed the b43 firmware and after that everything seemed working but just for a few seconds.
I have tried to reboot and after that I can't browse the internet just for a few seconds and after that Iceweasel loading and loading and nothing's happening.
I can't surf on the net just with cable but the wifi setup shows everything is okay 95% signal strength and connected.
Also tried reinstall the firmware and reboot and it's all the same after.
I can easily use my wifi with my smartphone too.
Just upgraded from Intrepid to karmic on my girlfriends Dell Vostro 1510 and the wireless stopped working. The drivers are installed and worked fine under intrepid. When I enter the hardware drivers utility it says that the driver is active but currently not being used.
iwconfif output:
Code:
lo no wireless extensions.
eth0 no wireless extensions.[code].....
I have a Dell Inspiron 1545 running Windows 7 64-bit. It has a Dell 1397 Wireless card with Broadcom BCM 4312 hardware. This is proven by running lspci in Terminal. I downloaded Ubuntu 9.10 64-bit and burned a disc of it. I used System>Administration>USB Startup Disc Creator to make a Live USB from a 4GB flash drive. I plugged it in and my computer booted into Ubuntu with no trouble. The only problem is that I can't connect to my wireless network. The problem is that no matter how I install the Broadcom STA driver, it just says that the driver is activated but not actively in use. I've used Synaptic Package Manager, Jockey, and even Terminal. I've tried running
Code: sudo modprobe wl
in Terminal, but nothing seems to happen. In Ubuntu, my computer acts as though it has no wireless card, but the wired connection is fine (except for the inconvenience of connecting with a cable). In Windows 7, the wireless connection is fine.
I have a 10 year old Dell Latitude CPx that has no ethernet or modem ports, and the only way to connect to the internet is the Dynex Wireless G DX-BNBC PCMCIA card. It came with Windows 98, and I put Xubuntu on it for a while. I believe it was Xubuntu 8 or 9. Back then I had no clue what to do whatsoever, so after a couple weeks removed it and put Windows 2000 on it. It worked, I used it for a while, but it was slow and 2000 took up a lot of space on the 12gb hard drive after all the updates. I left it forgotten and gathering dust for the past year.
Then a few days ago I discovered Lubuntu 10.10, and from what I've seen so far it is definitely a lot more compact and faster than 2000. However, the wireless card still won't work. It's somewhat recognized, because whenever I unplug it and plug it in a bubble pops up saying "you've been disconnected from the network"... which is odd, since it never says I'm connected, and says that the firmware is missing for this card. Anyway, I discovered something this time. By running "lspci -nn | grep -i 14e4":
[Code]....
I just installed Ubuntu 10.04.1 on my Dell Inspiron 1545 laptop, but I can't connected to the Internet with a wired or wireless connection. I have a BT Home Hub 2 wireless router. I can connect to the Internet when running Windows Vista, but not with Ubuntu.
I tried installing the Broadcom STA driver off of the live disk, which initially seemed to work. However, I still couldn't connect to the Internet and when I clicked on System > Administration > Hardware Drivers, there weren't any proprietary drivers to install or that had been installed. Also, when I reboot, Ubuntu tries to connect to my network automatically but always fails. That's what makes me think that a driver has been installed, but just isn't the right one or isn't working.
I am new to Linux. About 72 hours in, and I must say. I am quite impressed. Except for a small issue. I cannot seem to figure out how to get my wireless card working. I have used the bcm43xx technique with no avail. And am working on ndswrapper. The good news is I think I have the .sys file that works. But I don't have the .inf. However any way I could make this work would be great. Below I have posted my lspci stats.
Lspci:
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) .....
I have a Dell inspiron 1420 and its set up as a dual boot. Windows/Fedora.I cant get the wireless card to work. I review some previous posts but still cant get it working.
I did a /sbin/lspci
Network controller: Broadcom Corporation BCM4310 USB Controller (rev 01)
I did $rpm -q b43-fwcutter
b43-fwcutter-011-3.fc9.i386
I upgraded from 9.10 to 10.04 and my wireless card no longer works.
The card is a Dell 1450 USB a/b/g card.
lsusb sees the card. device id is 413c:8104
dmesg says that p54usb is trying to load firmware isl3887usb but that failed (error -2)
I looked in /lib/firmware and didn't find that file
ps. god why did i upgrade?
I have a Dell Inspiron 1525 laptop using Dell Wireless 1395 WLAN Mini-card (This is what Windows Vista says I have). I have installed Ubuntu as dual boot with existing Windows Vista. Wireless is not working in Ubuntu but working flawlessly in Windows.
Here is the output using CODE: lspci.
hai@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
02:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
02:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12)
0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
hai@ubuntu:~$
I have a DEll Mini 9 - it has worked fine even though it has a limited memory. But Husband only uses to have a surf. It now wont connect to net. The Broadcom4312 Wireless Card is not working on Obunto. It has a Dell 802.11b/g Wireless LAN Mini card installed and Obunto Edition Version 8.04 Have phoned Dell and after several calls on Hold for over 15 mins each time and getting nowhere fast i am coming to you guys/girls. I am not a very good comp person, but i do get by and i am trying, so be gentle with me. in simplistic terms.
View 2 Replies View RelatedMy Dell Vostro 1520's Dell Wireless 1397 WLAN Mini-Card must not have been set-up correctly, as the Network Manager won't even let me select the wireless tab. Please just explain to me, step by step, what exactly I must do to make it work! Additionally, I can't figure out how to disable my Touchpad's Tap to Click funtionality, which must be done if I'm to effectively use my current KDE installation of openSUSE
View 9 Replies View RelatedI have just installed Slackware 13 on my Dell but the BT LED is not lighted when I start machine.
I run:
# hciconfig -a
But no result returns
I search many times about this problem but seem not find any solution.
