I recently installed KArmic Kola on my DELL E6400 - 9600 INTEL PROCESSOR, 4GB RAM, NVIDIA GRAPHIC QUADRO 160. I have the following issues which is making me nervous to work on the system
- System keeps crashing - all of sudden the Caps button LED, NUM LOCK LED keeps blinking and system freezes for a while and restarts
[Code]....
I have recently installed Ubuntu 9.10 in my Dell Latitude E6400. Everything works great except that I cannot disable the built in microphone. I have even disabled from the BIOS but the mic continues working, this is really annoying as I do lots of calling from this computer for my work.
I have played around with the alsamixer and the sound preferences but I haven't been able to disable it or at least lower its volume.
My headset is plugged in to the mic jack and it works fine. The problem is that both the headset and the internal mic are working at the same time.
The internal wireless is not being detected, so I bought a DLink Nano. In following the driver install guides I receive the following error when trying to create drivers;
make
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/2.6.35.12-88.fc14.i686/build M=/home/username/Downloads/rtl8712_8188_8191_8192SU_usb_linux_v2.6.6.0.201011
[code]....
I had a Dell E6400 laptop with a nVidia controller. Is anyone know how to set it up to a dual monitor?
View 2 Replies View Relatedhaving a weird problem with my wireless connection on a Dell Latitude E6400 laptop.This machine has a Dell 1510 half-card. It uses a Broadcom chipset.I've gotten to the point where fedora sees the card, and I can create wireless connections. But every time I try to connect to a network, it scans, connects, and disconnects several times, until it gets a completely bogus IP address, that has nothing to do with any of the networks onnect to. It is always "10.42.43.1", yet I have no static configuration for that address.
Code:
# lspci|grep -i wireless
0c:00.0 Network controller: Broadcom Corporation BCM4322 802.11a/b/g/n Wireless LAN
[code]....
I have installed several flavors of Linux on this box Ubuntu, Mint and a few others so I figured I would try the most challenging disto Slackware 13.37... I had not trouble getting through the install but when the system boots it just shuts down at some point during the boot process.
View 3 Replies View RelatedI am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
System: T400 notebook, intel and ATI graphics, only intel graphics enabled. 9.10 64-bit, whole disc encryption. New install. My system recently started crashing periodically. At first there was no problem. There is no particular program that causes a crash. I havent edited any configurations. The most recent packages I installed were some data recovery packages and Gkrellm. Is there any way to find the time of installation for each package?
I upgraded to kernel 2.6.32 Ive been looking at the syslogs and before every crash there are several lines of:
Jan 9 20:46:24 username wpa_supplicant[1677]: CTRL-EVENT-SCAN-RESULTS
Jan 9 20:48:24 username wpa_supplicant[1677]: CTRL-EVENT-SCAN-RESULTS
Jan 9 20:50:25 username wpa_supplicant[1677]: CTRL-EVENT-SCAN-RESULTS
I did a google search on this error but the only real suggestion I found was the kernel upgrade.
[Code]...
I've just been given my new dell E5520 laptop. I stuck in the f15 DVD and booted. After selecting install I get the usual boot screen then it stops with trace errors. I have heard of some issue with linux and new latops but cant find where I got this from.
I would copy them onto here but have no idea how to get the info of the laptop. If there are any specific items needed let me know and I will type them in. This is going to be very annoying and I dont what to use the windows 7 thats on it.
Just for info I have just booted linux mint 11 and that booted and loaded ok. I will try and take a pic of the fedora error
I recently got a Dell Netbook Mini10v with Ubuntu 8.04 preinstalled. It does not give the option to upgrade using the normal features in the GUI (as far as I can tell) how should I go about upgrading my system to 9.10?
View 2 Replies View RelatedI am unable to install karmic on my dell inspiron1464 laptop. It has core i3 processor n 2 gb ram with windows7 already installed. I had installed karmic on my pc n it didn't gave any problem but when I am trying to install it on my laptop it is just showing the try ubuntu n install ubuntu options and when I select the option to install it is showing blank screen n after sometime even the cd stops working n I have to reboot again. I want to install karmic on my laptop with dual boot option wit windows 7.
View 9 Replies View RelatedI can't willingly cause this to happen, it's completely random. I strongly believe it is the video card. My wife insists that it's a virus, but it's ridiculously hard to get a virus on Linux and she doesn't have anything relevant on the matter other than 'people are switching to it on Facebook, so hackers are attacking it now.'.
Here's my specs:
Distro: Xubuntu 9.04
Laptop: Dell Inspiron 9300
Processor: 1.02Ghz
Memory/RAM: 512
Video Card: ATI Radeon X300
I've never tried installing any other operating system on my desktop so I'm not sure if it's a 9.10 bug (probably not), but whenever I choose any of the options after the ubuntu cd has been loaded at startup it goes to a black screen with the underscore at the top, and promptly reboots. At this point in time I can just boot back into windows or get to the same selection screen off of the cd.I've tried burning 3 seperate cd's and at the moment and trying to boot them on my laptop (but not working... hrm). I'm thinking about redownloading the iso in a couple minutes.
View 2 Replies View RelatedHave been running Karmic 910 for six months on a Dell Latitude D510 laptop with a Pentium M CPU, 2 GB of RAM and Intel 915 graphics, and I really like it, especially the Gnome desktop. However, a glitch occured after suspending, resuming, shutting down and trying to restart. Now after selecting Ubuntu in Grub the Ubuntu logo shows up onscreen, doesn't seem to pulsate, and eventually is replaced by an error message that the system gave up waiting for root device.
The LiveCD shows the Ubuntu partition as unrecognized, unknown or unused in Palimpsest Disk Utility, though Gparted shows it as normal ext4. The partition doesn't show up in Places. From the command prompt (via ctrl-alt-F1) I'm able to run fdisk, which shows the partitions but am unable to mount the Ubuntu sda4 partition - the error message is that the file type must be specified.
Starting recovery mode in Grub brings about 25 lines of startup messages, mostly dealing with usb devices, but a few render errors are there too. The last message before dropping to the ash shell is that a device could not be found. (ALERT! /dev/disk/by-uuid/5cee... does not exist.) The ash commands are completely new to me, so I haven't had any luck with recovery mode.
If the problem is related to Intel graphics, I would like to try some "quirks" (software fixes for hardware problems, including Intel graphics bugs) mentioned on the ubuntu.wiki site. I'd also like to recover the data on the desktop, but so far cannot get into the file system.
Does GRUB need to be reinstalled? If so, why?
Would reinstalling without formatting anything preserve the data?
Would upgrading to Lucid help prevent the problem from occurring again?
What's the right direction or give me step by step on how to do this?
View 6 Replies View RelatedI find myself in unfamiliar territory. I am attempting to get a Dell M610 (in an M100e) running Ubuntu 9.1 64bit to talk to a Dell EMC Fibre Channel Array. The Dell has an Emulex card in it and it appears that the driver is loaded OK. What I am not sure on is what to do next! I have the SAN end configured but how do I get my LUN mounted on Ubuntu ?
View 1 Replies View RelatedI am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
This card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
My Dell Vostro 1520's Dell Wireless 1397 WLAN Mini-Card must not have been set-up correctly, as the Network Manager won't even let me select the wireless tab. Please just explain to me, step by step, what exactly I must do to make it work! Additionally, I can't figure out how to disable my Touchpad's Tap to Click funtionality, which must be done if I'm to effectively use my current KDE installation of openSUSE
View 9 Replies View RelatedI have just installed Slackware 13 on my Dell but the BT LED is not lighted when I start machine.
I run:
# hciconfig -a
But no result returns
I search many times about this problem but seem not find any solution.
I ran Ubuntu 10 from a USB flash drive on my HP Desktop with an AMD Athlon processor (2.16 GHz), 512MB or RAM, and 160 GB of hard drive disk space. I gained access to the Internet and ran my e-mail program (Verizon). After about 10 minutes, the session froze. Not knowing the equivalent of Windows Task Manager, there was nothing I could do but do a cold boot. Are there setting that I can change that will prevent my sessions from crashing while using Ubuntu from a flash drive?
View 2 Replies View RelatedI keep having problems with firefox. It keeps crashing when I'm listening to the radio. Has anyone else had this issue?
View 1 Replies View Relatedevery time that im entering to eclipse and the mouse is over a method for example Socket ... the eclipse is crashing
this is the log file
hs_err_pid11080 - UpF.co.il
I have Ubuntu 10.04 32bit on two machines and the one my parents has been crashing/having other issues a lot (the other is fine). I build my own PCs, and this one I built for my parents as a budget build as they basically use the internet and upload photos, that's it. It's got an AMD 64 3800+ processor, a GeForce 8400GS, 1 Gig of Corsair DDR2 (this passed 8 hours of memtest), an ASUS M2A-VM mobo and a 320GB WD HDD.
The crashes initially and may still be, GUI/graphics related. The biggest problem is they would boot up the system and there would be no GUI, it just never loaded so they would hard reboot. The other thing that would happen, when it went into screensaver mode, moving the mouse wouldn't bring up the password prompt, it wouldn't do anything just leave a black screen with no mouse, it would lead to a hard restart. These problems initially occurred on an older HDD that used to have windows xp on it that my parents loaded with viruses. Of course that HDD had been reformatted for Ubuntu, but I felt that it was damaged and these problems were related so I went and got a new Western Digital one for them and installed it with fresh installs of Ubuntu 10.04 (and a dual boot of Windows 7) but these crashing issues have persisted.
I found a fix on here that had me "force" the GUI to load each time via the terminal, which seems to have worked somewhat and the GUI loads more often. However, every now and then on boot up, parts of the GUI do not load and a window pops up asking that I delete elements from the panel. Again, this leads to a restart, except now sometimes when it reboots it gets to a DOS prompt (sorry, old windows user) of sorts that asks for a system password, when entered, nothing happens and requires another hard restart. These restarts tend to happen in chains leading to DOS prompt a faulty GUI or a GUI with missing elements.
There are also other general issues. Periodically desktop icons won't launch programs and or menu items will not load programs when selected, just nothing happens. When browsing the net with Opera or trying to open the recycle bin, the screen will just go black.I also messed around with the built in Nvidia Driver finder tool under system - administration-hardwaredrivers, tried the recommended and not recommended drivers, no difference. I've booted into recovery mode on the grub menu tried fixing and updating things via the menu options, still get one of the above issues.This system is up to date with system updates as well. I'm not sure what else to do, but I still have a sinking suspicion this is caused by some kind of graphics driver problem or maybe a problem with that graphics card in particular! I've installed Ubuntu fresh on this machine 3 total times, the latest install only last month when I created a dual boot with Win7.
VLC started to crash today, after (I think?) updating to KDE 4.5 . I'm not sure if it's the update's fault, as it was also today that I switched to KDE from GNOME. All I know is, that up until now, VLC was very stable, it never crashed. Now, it will start only to close in a few seconds later. I tried re-installing it, but it didn't work. It doesn't matter if I open a file directly, or start it from a terminal/menu. If I start it from a terminal, this is what I see:
Code:
$ vlc
VLC media player 1.0.6 Goldeneye
(15966) KSharedDataCache::Private::mapSharedMemory: Opening cache "/var/tmp/kdecache-damnated/icon-cache.kcache" page size is 4096
(15966) KSharedDataCache::Private::mapSharedMemory: Attached to cache, determining if it must be initialized
[Code]....
I rebooted my computer and there was strangely 2 audio icons next to the clock. I right clicked 1 and removed it from the bar. Now I can t seem to get that bar to quit flashing. I tried the recovery console. to repair any broken packages. Still flashing. I can't seem to get any programs open. What could be causing this issue and how I can fix it?
View 2 Replies View RelatedMy laptop, running Ubuntu 10.10, keeps on crashing. For a Windows user, this would be normal, but isn't it rare for Unix-based OSs to crash? Could there have been some corruption in the disk I installed it with?
View 7 Replies View Relatedi have upgraded vlc 1.1.4 to 1.1.7....but im having a problem regarding the 1.1.7 version. the vlc(1.1.7) is crashing on exit.
View 1 Replies View Relatediv been on the beta 2 for a long time! and its working really nice but the pulse audio loves to crash it crashs flash and the computer it self like the browser and all and when ever i start skype witch i need for work it crashs and forces me to re boot witch is annoying and i hear can crash a harddrive im wondering if any one can help me! if it my sound card or ubuntu ?
View 4 Replies View RelatedI've managed to install the 32bit version on my laptop with little issue, and I'm really liking the Unity interface. There's a few issues around customisation and minor usability quirks, but from my experience with things like KDE4, I'm guessing it's only time. Anyway, I've been having major problems getting the 64bit version running with my Desktop. I have 8Gb of RAM in that, so it's not really an option to use the 32bit version. The Installer crashes constantly, but I was able to upgrade from 10.10 using update manager, but unfortunately Natty is no more stable than it's installer.
While logging in, or shortly after, the machine will crash to a text console displaying a Kernel Panic message. There's also messages indicating a problem with the CPU MCE. I've tried setting various kernel parameters at boot, such as nomce and nomodeset, these have extended the time the machine is up before crashing out, and removed the Kernel panic message, but not the crashes. I'm guessing the MCE messages were unrelated or a symptom in this case.I've done a huge amount of searching, and found no suggestions that I haven't already tried. Running Ubuntu 10.10 64 bit the system is rock solid.