I've just installed Fedora 13 and I have a question. How do I tune my tablet? I've tried to set threshold and aspect in xorg.conf just like in Fedora 11, but it doesn't work in the current release.
Here's a part of my xorg.conf:
I also tried 'xsetwacom' command, but I get errors.
I have a wacom graphire3 tablet and two monitors. The tablet is workin properly with out of the box drivers.
As well as the dual monitors configured as twinview through Nvidia X server. But the tablet is mapped for the two screens, then I searched the forums for a proper configuration and it it tells me to edit the xorg.conf file for twinview horizontal but, it don't make any difference. I've "sudo gedit" edited the xorg.conf and nothing happens. Nothing, the tablet is working properly, the system is stable and it's still mapped for two screens.
What can I do? The xorg.conf also isn't listing all my hardware, I can't see the confs for my mouse. I'm on karmic koala.
I was messing with xorg.conf trying to get my wacom tablet to work. I restarted and it brings be everytime to a terminal. I can log in but that is about it. When I type startx it says xorg.conf is messed up bad. I already tried:
[Code]...
I have recently bought a Wacom Bamboo Pen Tablet, and just as recently installed Fedora 12 KDE for its supposed "excellent tablet support".
Well, I have yet to see any of that. Unless the fact that I'm using KDE affects this (and I'm staying KDE, no more GNOME for me!), I see no reason why my tablet should not work. It was working fine in Windows Vista Home Premium 32-bit (though the last time I started up in Windows it said it didn't recognize the device).
None of the applications that I've heard implemented in Fedora to support tablets were installed, but then again they're all probably GNOME apps, am I right? Still, my tablet should at least act as a mouse? I checked KPackageManager, and it said that the latest linuxwacom driver was installed. So why isn't anything working?
It seems as if everything - all this talk about tablet support in F12 - is just for GNOME. About the only thing working with my tablet as I type this is the status light, which indicates it being recognized as a USB device, and it flashes like it should when I tap the surface with the pen, but it seems as if there's nothing to receive the input. I even installed the latest GIMP, and when I checked Input Devices, nothing relating to the tablet was even there! At least on Windows it showed the Pen and the non-existent eraser, though neither worked properly, but it seems as if Fedora 12 doesn't even know it's there!
I shouldn't have to change anything in xorg.conf, because I thought that linuxwacom did it for you?
I'm looking for a decent program to take notes on my Lenovo tablet laptop. What's your favorite?
View 1 Replies View RelatedI upgraded to Fedora 12 right after release, everything was working fine until update on previous weekend. Looks like it updated Wacom drivers and kernel. Now what I have. I hotplug my tablet in USB, and everything seems fine, I can position a cursor and press buttons, but after I press some button it hangs (LEDs on tablet are responding) I must remove Stylus from proximity in order to make it respond again (while stylus is away LED on tablet switches off for a fraction of second).
If I move mouse during tablet hanging, applications barely respond and if they are it is like mouse button is pressed (selecting text). I tried wacdump, and it's reporting everything's fine (X,Y, Tilt, Pressure everything shows up). I couldn't find evidence that wacom driver is controlling it, but I assume if wacdump is reporting then it is. I have:
Kernel 2.6.31.6-145.fc12.x86_64
linuxwacom.x86_64 0.8.2.2-15.fc12
I didn't touch xorg.conf in sense of tablet, but it worked for me in F11 and until now. I'm trying to make least manual configurations possible. Through exploring /proc/bus/usb/devices and kernel messages I confirmed that wacom drives is handling the tablet. And I noticed that in X's log
(II) config/hal: Adding input device Wacom Intuos3 9x12
(**) Wacom Intuos3 9x12: always reports core events
(**) Wacom Intuos3 9x12 device is /dev/input/event8
(**) Wacom Intuos3 9x12 (Wacom Intuos3 9x12) is not a pad
(**) Wacom Intuos3 9x12 is in absolute mode
(**) WACOM: suppress value is 2
(**) Wacom Intuos3 9x12: reading USB link
(**) Wacom Intuos3 9x12: threshold = 61
(**) Wacom Intuos3 9x12: max x = 60960
(**) Wacom Intuos3 9x12: max y = 45720
(**) Wacom Intuos3 9x12: max z = 1023
(**) Option "BaudRate" "9600"
(**) Wacom Intuos3 9x12: serial speed 9600
(II) XINPUT: Adding extended input device "Wacom Intuos3 9x12" (type: Wacom Stylus)
(EE) Wacom Intuos3 9x12: Top/Bottom area overlaps with another devices.
(EE) Couldn't init device "Wacom Intuos3 9x12"
(II) UnloadModule: "wacom"
(EE) config/hal: NewInputDeviceRequest failed (1)
I've encountered quite similar error in openSUSE when was configuring tablet manually in xorg.conf. As I can see problem is with "pad" device, which I disabled in openSUSE in order to make X running. So why is it not working?
I recently purchased a Wacom Bamboo Pen Only (CTL-460). It's a great device and in Fedora 15 (x86_64) it worked out-of-the-box like a charm!
I don't miss the rubber or the extra keys on the tablet. But I'm having quite some trouble, using the pen as a mouse replacement in all day use. The following is with respect to usage outside GIMP and Inkscape (i.e. Firefox, Nautilus etc). What I would really like to have, is:
+ scrolling by pressing the "first button" and simply _moving_ the pen. Just like with my Thinkpad-Trackpoint: Here I press the middle key and can then scroll just by controlling the Trackpoint. Would already be cool, if I could scroll by pressing the "first button" and touching the tablet. A short tap while pressing the "first button" should still be a "middle click"!
Code:
Found a solution for "jamming at the edge of the screen". Just resized the "area" a bit (smaller) with xsetwacom...
im trying to use my wacom tablet with fedora 10. I have looked around the net trying to find a simple way to install the driver but it is all rather technical would some one be able to give me a basic how to it would be great
View 2 Replies View RelatedI've just done a fresh install of Lubuntu 10.10 on an older Sony Vaio laptop. Having learned the hard way about editing xorg files, I wanted to create a backup of the xorg.conf file so that I dont have to do another install when I screw everything up. In a terminal, I typed
[Code]....
I have installed Kubuntu 8.04.2 on a USB stick with persistence to keep any changes I make after a reboot and it works fine. I then installed the 185 Nvidia driver to give me higher resolutions and it works fine.
But each time I reboot, my updated xorg.conf is replaced with the default xorg.conf that ships with that version of Kubuntu and a backup is made of my updated xorg.conf (the correct one) which looks like xorg.conf.20100409135913. I have to put the backup xorg.conf back in place to get my Nvidia driver to work with the correct screen resolutions again. Otherwise my screen resolution is too low.
What could be causing this behavor? I'm sure it not the persistence feature of the USB stick failing since a backup is made of my original xorg.conf.
I might add more information. The xorg.conf that gets changed after a reboot says "This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database." #
1. What is the difference between files (xorg.conf and xorg.conf-vesa)
2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from
[Code]...
as a kind of luxory item I am thinking of adding a bamboo to my PC. Before putting action behind this, I wonder how much of a hazzle this brings about. Has anybody of you experience with 11.4 in this field? If a hazzle: Can anybody be bothered to compile the driver and provide it as a 1-click on the build service - or even in the official repositories? Would there be full functionality actually after all? BTW, I am aware of the wacom SF-site.
View 9 Replies View RelatedMy Wacom tablet's cursor skips around the screen and makes it impossible to use. Is there a way to use wacom-tools (wacomcpl) to fix this? Or, is there any known way to fix this?
View 4 Replies View RelatedI have a wacom pen and touch tablet and am running 10.4 what is the easy way to install and get it working?
View 9 Replies View RelatedI am attempting to set up a wacom bamboo tablet with ubuntu 9.04 (latest version for netbooks).
I have followed howto advice however i have failed to produce the wacom.ko from the downloaded driver. The driver from the Linux wacom project is "linuxwacom-0.8.4-4.tar.bz2"
There appears to be a problem when i use ./configure --enable-wacom thereafter make and install fail to produce the required files. Below is the message when configuring the file.
*** WARNING:
*** Unable to guess kernel source directory
*** Looked at /lib/modules/2.6.30.5-ep0/source, /lib/modules/2.6.30.5-ep0/build,
*** /usr/src/linux, /usr/src/linux-2.6.30.5-ep0, and
[ode]....
It's a CTH-460. I downloaded the driver from the linuxwacom project and followed the instructions.
It doesn't work yet but lights turn on, and the pointer follow the displacement (no writing is possible). I have tested also in Windows Machine and it works perfectly well.
My machine is an ASUS VX2S and the distro is Ubuntu 10.04.
I decided to write here because I was wondering if there are any Wacom Bamboo (MTE-450) tablet users who experience any resume problems with their tablets on 11.3. I experience this issue on 11.2 - tablet was not working after resume from suspending to RAM - I had to replug it in order to make it work. Now when I upgraded to 11.3, the issue was still there.
Finally, I was able to "workaround" the issue by doing the following (found on some Ubuntu groups):
Code:
echo 'SUSPEND_MODULES="wacom"' | sudo tee /etc/pm/config.d/50wacom
I am wondering if that happens to anyone else and if it still the case for a freshly installed 11.3.
I've read the how-tos (thank you oldcpu!) and wikis about how xorg.conf take precedence over the section configuration files in etc/X11/xorg.conf.d/, if it exist. I also understand that the xorg.conf can be partial. If it is missing some sections, these will be taken from the corresponding xorg.conf.d section config file. Currently I'm using a xorg.conf generated by nvidia-settings in one of my home machines, due to a dual-monitor setup. After generating xorg.conf, the device sections are:
in xorg.conf:
Code:
Section "Device"
Identifier "Device0"
Driver "nvidia"
[code]....
My question is if the Option "UseCompositeWrapper" "True" will be used or not. In other words, if a section exist in xorg.conf then it's correspondent in xorg.conf.d/ will be completely ignored *or* only the lines in xorg.conf.d/ that already exist in xorg.conf will be ignored?
I'm running the ubuntu based Green OS and cant get my video card properly configured. i've already gone through the forums to figure out what i need to do to get my ATI card working but my system wont let me access the xorg.conf file. i can see it using the the GOS file editor but it wont let me save the modifications. when i attempt to edit from a terminal window with su privelages it tells me that /etc/x11/xorg.conf does not exist. i've even tried booting into recovery mode and using the root instead of the sudo command. nothing i've tried will let me open the file.
View 3 Replies View RelatedI have recently purchased a Wacom Bamboo Pen & Touch tablet and have got it working with Ubuntu 9.10 (Karmic) by following this post: [URL].
I am now trying to trap the actual data coming from the bamboo as I write with the pen and found some threads suggesting that if I do an xxd one of /dev/ttyS[0-4] I should be able to see output. However when I do a "sudo xxd /dev/ttyS0" the xxd command finishes straight away.
If I run the command "xxd /dev/input/mouse1" I can the data coming from the mouse movement so I am expecting to be able to see the same sort of thing coming from the wacom bamboo pen. Both the bamboo and the mouse are USB connected.
Does anyone know if the stream of data coming form the wacom bamboo should go to /dev/ttyS[0-4] or should I be looking elsewhere?
There has been a lot of effort invested in getting external USB connected anything to work well during the connect then disconnect processing. It seems that there are troubles with OEM serial digitizers like those built-in for a tablet-PC. The built-in OEM devices do not have the same sort of connection events to trigger device creation and configuration.
Does anyone know how to make all of the find-hardware then create configuration processing visible? While I find several postings that describe "... edit xorg.conf ..." but then those edits don't want to work with the recent evolution in Xorg and X11-server configuration that deprecates (abandons?) xorg.conf. Does anyone understand what is going on with Xorg and X11-config to help me get my tablet working? Has anyone used an external USB tablet, then adapted those configuration details to get an OEM tablet working? I know that every tablet is different, but if the external device connect-creates-config process works best, it seems there might be value here.
along with Aiptek, Hanwang, N-trig, Waltop, & WizardPen (Ace Cad, KYE Systems, UC-LOGIC) Tablets Last updated: July 24, 2011 Preliminaries
1) You must have X server 1.8 or up (Maverick has 1.9).
[Code]...
i have a minor problem with the wacom tablet CTH-461. the gestures and mouse sensitivity with the finger touch is too sensitive... i mean that the mouse is moving really fast and you have to be very careful when you are pinching / zooming with your fingers... and second question. where i have to submit this "bug" bcs the 11.04 is still alpha and i want the tablet to be in final release as much as possible supported.
View 3 Replies View RelatedDoes anybody have experience with linux tuning. I`m realy interesting about sysctl.conf tuning settings for batch(3d rendering, phisycs simulations, etc.) servers. Does anybody has an experience with linux tuning - I mean memory and CPU settings for heavy loaded systems. What kind of settings You have in Your clusters ? I`m working with Red Hat Enterprise 5 x86_64.
View 2 Replies View RelatedWhen I switch my KVM over to my Ubuntu box, the Wacom tablet causes X to crash about 1 out of every 4 times. I will usually see what I'm supposed to for a split second, get a blank screen and/or command line for a second, then I'm back at the login screen.
Xorg.4.log: (EE) Wacom Graphire4 4x5: Error reading wacom device : No such device
If the tablet is plugged directly into the KVM, it crashes every time. Instead, I have the tablet plugged into my Mac laptop, which is itself plugged into the KVM (TrendNet USB w/audio).
While trying to implement some of the suggestions in the fedora 12 common problems (Intel Graphics)I discovered I cannot get the resolution correct using a xorg.conf file . Here is the file# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
[code]....
Cannot edit xorg.conf on Fedora13. I do it from the root but changes is not saving.
View 7 Replies View RelatedI have used nVidia my entire linux life (about 5 years clean and sober from M$). Recently, I have switched over to an ATI Radeon HD 5550 card. After many trial and error setups, I finally got the resolutions and screens set properly with a xrandr command, which I have now added to a shell script in ~/.kde4/Autostart. It has worked for me for a while now, but I really would like to get it set in the xorg.conf.d files so that I don't have to wait that extra few seconds after login for the screens to fix themselves.
Is there an easy way to take what xrandr does and export it to the xorg.conf.d files? If my video card recognizes my default monitor as DFP2 and the tv that I only sometimes use with this computer as DFP1, how can I ensure that the login screen for openSUSE/KDE4 appears on my default screen (an issue that drove me nuts a few months ago when I tried Ubuntu to see what all the fuss was about)?
My xrandr command that I use to fix it all is:
xrandr --output DFP2 --auto --pos 0x0 --primary --output DFP1 --auto --right-of
I am using the proprietary Radeon driver from the ioda repository. DFP2 is a monitor which has a optimum resolution of 1920x1200, and DFP1 is an 1080p HDTV. I can not reverse the output plugs for the screens even though my monitor is an HDMI monitor because I use the actual HDMI port on the video card to output audio to the television and the other plug is a DVI that I convert to HDMI for the monitor.
I'm using FC10 and few WM (Fluxbox, E17, LXDE) this WM's have no spetial application (applet) to set/change keyboard layout.
I edited my xorg.conf:
Quote:
In older release (FC9) with this config and alt+shift combination keyboard layot are changed, but not in FC10
I tried to install the Catalyst 9.9 driver on Fedora 11 64bit. Only when I was finished with the guide, I read the comments that said it wouldn't work on 2.6.30 kernel.I've written over my old xorg.conf, blacklisted radeon and radeonhd, restarted my machine.When i restarted my machine X wouldn't work ofcourse and all I got is some red coulor in the top of the screen, and no access to terminal via ALT+F2->F6. only way to get access is to add "telinit 1" to the startup line in GRUB
I've tried
Code:
X -configure
and
Code:
system-config-display --reconfig
The first dosen't work and the last dosen't seem to be installed....since i'm on wireless the network has problems to connect....I can pull a cable but not right now.....
I have yet to try:
Code:
[root@fedora ~]$ /usr/share/ati/fglrx-uninstall.sh