Fedora Hardware :: Laptop Boots All By Itself / Fix It?
Jun 25, 2011
411:
New Toshiba R830-8300 laptop
All BIOS settings I can find relating to self-starting are turned off.
Three times, this silly thing has booted - while closed and being otherwise ignored - all by it's lonesome. I've discovered it pretty much by accident when I notice the power LED and the wireless LED are lit. (You can see them glow under the front edge of the cover.)
Everything I can find in the BIOS setup, wake-on-LAN etc. has been turned off, and still this thing ghost-boots.
The CAT5 is disconnected, the local wireless radio is shut off, the power cord is unplugged, and the power button doesn't otherwise display any slop or sensitivity in movement.
No IR or remote in this Toshiba, just wireless and bluetooth.
In short ... WTH is up with this?!?
Any ideas what's going on here?
BTW, to add another interesting dimension to the problem, several weeks ago, I also discovered the HP Pavilion Fukushima laptop had booted itself once as well. Heard it beep when it posted about 0345hrs. When I came in to check, it was in the process of booting up ... while closed.
View 8 Replies
ADVERTISEMENT
Oct 29, 2010
my desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:
the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.
finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.
usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.
this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.
right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.
the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??
View 14 Replies
View Related
May 11, 2010
I just upgraded from Karmic to Lucid and my system will no longer boot. The upgrade completed without any error messages, but upon reboot, it hangs at the loading screen. I cannot start the system in recovery mode either. Same issue happens. To get to the command line, I've appended:
init=/bin/bash
to the kernel line in grub. I then remount so I have r/w access.
It appears to be an issue with udev. While the loading screen is "loading," udevd_work scrolls a bunch of stuff that's too fast for me to read (nor can I copy and paste it).
/var/log/udev isn't showing any recent errors, only messages from before the upgrade.
View 3 Replies
View Related
Mar 1, 2010
I am also wanting to install on a laptop which is about 2 years old. I get the error message "ntldr is missing" when it boots up and doesnt recognise the disc even though it is set to boot from cd first!
View 2 Replies
View Related
Oct 5, 2009
I rebooted my Fedora 11 server via SSH and when it came back up it booted the gui, but no option to log in just a mouse pointer and a spinning blue circle...nothing I can do to get it back.
I should add that I installed the latest updates this morning and this was the first reboot since then.
View 1 Replies
View Related
Nov 18, 2009
I have no other gripes but one minor problem; After the boot, the KDE4 desktop starts with a resolution of 1152x864 instead of 1280x1024 selected at display settings. Strangely, it seems to activate the correct resolution instantly when I enter the display settings menu that shows the intended resolution (no need to apply anything). Going to the settings menu is a bit bothersome after every boot.
View 2 Replies
View Related
Jun 16, 2010
I just finished an update on the kernel and it seems to be ok as shown in the grub:
Code:
default=0
timeout=5
splashimage=(hd0,8)/boot/grub/splash.xpm.gz
[code]...
View 8 Replies
View Related
Aug 6, 2010
I've dualboot system grubloader made by Mandriva. These lines in Mandriva menu.lst is for Fedora 13.Why is it that Fedora seldom managed to boot successfully in first time? Mostly i've to boot 3,4 even 5 times to reach the desktop. That blue&white line (kernel PAE) is always visible on bottom of screen but many times it stopped to black screen and no gnome cursor after that.
View 3 Replies
View Related
Jan 22, 2009
In completely new to Fedora. After a clean install, I went through, configured yum, did all yum updates and rebooted. I then installed the graphics card (m9500 gs) using RPMfusion and restarted again. After doing so, the comp shows the fedora loading bar but once it finishes, it hangs there and you see a small flashing box. I have no idea how to uninstall that nvidia driver.
to my xorg.conf. Still same issue. Finally I went through and added the "notap" to the grub.conf. I am at a complete loss here. When I try and manually load the driver, the Nvidia installer gives and error about not finding any preconfigured kernels for the package. Then It try's to build its own kernel but says its missing the "cc" in the "gcc" package. Any ideas? If you want to know exactly what I've done so far, I pretty much only followed the guide at my-guides.net. As you might be able to tell, I am very NOOB.
View 4 Replies
View Related
Mar 24, 2010
duplicate ip, my mistakewhen logged into a fc12 server with ssh, and a node tried to connect to the server using ftp...
View 1 Replies
View Related
Mar 30, 2010
My computer starts up and, usually, gets to a desktop (I can login). If I click on a folder to open it, the computer just dies. No power at all. Sometimes it doesnt even make it through the boot up stage, just stopping before getting to grub. This happens in F10 and F13, whether the grub is on the harddrive or a USB key. I'm thinking that I might need a new power supply, but I'm also wondering if I might have fried the CPU, which ran for several days at 50 or so degrees, (for sensor one on the little gnome panel applet). But it did go over 60 a couple of times and die from overheating. These higher temperatures were achieved by running CPU intense software, with the cores in use running at 100% each. The higher temperatures were from running it with all four cores.
View 14 Replies
View Related
Jun 12, 2010
Hello everyone. I switched over to Fedora a little while ago, maybe a month or two, towards the end of when 12 was out. 12 ran just fine, but around when I upgraded to 13 I started experiencing issues. I first upgraded by switching repositories and installing via yum, which seemed to run fine for awhile. However, came to the point where about every other boot (a little more often, actually), the system would crash at the login screen, not allowing me to login. Ctrl-Alt-Backspace or other rescue keys don't work- in fact, if the mouse is still working, they freeze the pointer as well.
Finally I decided to get the 13 DVD and re-install. Downloaded, media checked out, ran the install... and I'm still having the same issues. I know I should be providing more info here, but I'm not sure what log files to look for and post here. A few notes of relevance are that I've tried changing the ACPI settings in my BIOS to be as compatible as possible, and also tried booting using noacpi, which doesn't seem to be fixing it- I also have Nouveau installed.
So, what should I do? Anything I need to provide to help troubleshoot, I'll gladly do.
View 3 Replies
View Related
Feb 16, 2011
I have 64-bit Fedora 14 with the latest kernel. A short while ago a yum update of gdb, ssl and ssl 64-bit suddenly and automatically turns my desktop into a stationary screen with just a Fedora logo, not even a whirling orb inside the F-logo. I reboot a few times but I cannot go beyond this desktop to log in.I realized because F14 won't boot, this thread should be in Installation Help so would you mind moving it for me?Questions for all members:How do I get into "rescue mode" (a) from FC13 in an adjacent partition? or (b) from a Fedora14 Live CD?Is grub.conf messed up? If so, how do I fix it? don't really know exactly what went wrong so I threw just a few questions out for folks to look at
View 1 Replies
View Related
Jul 30, 2009
It mounts sometimes, sometimes it doesn't ! what could be the problem ? i have tried mounting it manually but no success.
View 5 Replies
View Related
Sep 8, 2009
Applied several updates last night including a 2.6.30.5-43 kernel and a suggest kmod-nvidia but the 5-43 kernel boots to a wallpaper gnome screen the first time.
Booted to the "fallback" 2.6.29....17 kernel and it worked fine.
Then 2.6.30.5.-43 also booted but without nvidia.
Installing akmod-nvidia as sugggested in other posts. Also see a kmod for this kernel.
View 1 Replies
View Related
Oct 4, 2009
I have a wide screen monitor (1440x900). I would like to change the fonts used when the machine boots and shuts down. Right now they are huge and the first 1-2 characters are hidden.
View 3 Replies
View Related
Jun 8, 2010
Im a newbie having the opposite issue that seems that everyone is having for what Ive seen, I have Grub on the MBR, showing the splash screen fine (the background image also), and allowing me to boot Windows 7, but I get a cursor blinking for the eternity when trying to boot Fedora 13.My hardware is:
Quote:
-ASUS M4A89GTD PRO (AMD 890 FX AM3 Chipset).
-Phenom 965 BE.
-4Gb RAM.
-3 x 250 Gb SATA Hard disks, first one alone for OS, and the other two in fake RAID1.
-1 x 80 Gb IDE hard drive containing trash.
-RADEON HD 4870 1Gb Graphic Card.
-RME HDSP 9632 Soundcard
[Code]...
View 4 Replies
View Related
Jul 16, 2010
I have downloaded Fedora-13-x86_64-Live and burned it to a CD. Restarting the computer with the CD in the drive, it is simply ignored and Windows 7 boots normally
It's an HP Pavilion Slimline s5510f PC.
Operating System
Name Microsoft Windows 7 Home Premium Edition (64-bit)
Build Number 7600
DirectX Version 11
[Code]....
View 6 Replies
View Related
Oct 9, 2010
i have just installed fedora over a existing copy of ubuntu. The problem is i cant boot in to vista any more. i have looked over many forums trying to fix it but still wont work.the attachments are of screen shots i have with the details of the hard drive partitions.i am able to mount the hard drives and have all the data still and still have the boot folder for vista but just cant figure out how to boot in to vista.i also get the error " error 1: filename must be an absolute pathname press any key to continue" i get this error when i try to change the boot partitons
View 4 Replies
View Related
Nov 13, 2010
I have this odd issue. I am new to Fedora; however, I have been able to download the newest version of OpenOffice, and install from RPM into /opt. The install goes great, and once completed I am able to use OpenOffice from all of my user accounts; however, after a few boots, or reboots of normal operation. OpenOffice stops working, and no longer launches. I am not sure why this is happening, nor do I know where to check to see what is takin place, or whether if the application is launching or etc.
View 8 Replies
View Related
Aug 20, 2011
I have installed Fedora 15 64bit live with no apparent errors and I get to the "Welcome" where it says just a few more steps before I can start using Fedora after filling in the details hit the "Forward" button in the lower right hand corner. The problem is I can't see the forward button, its like I need to page down or something but everything I have tried isn't working. I then decided to use the Fedora 15 64bit DVD thinking a driver was missing or something and it is still the same issue. I am using a Thinkpad T61 laptop with an external monitor and the external monitor goes blank when it boots to the welcome screen, but I can scroll over to the external and see the mouse cursor on the external. It seems that if I could see the welcome screen on the external monitor that I might be able to see the "Forward" button. Both installs went without a hitch, the DVD install found my internet connection and downloaded a bunch of stuff and the DVD install took about two hours to complete, again with no errors reported. I hope I am not being daft here and missing something obvious.
View 2 Replies
View Related
Mar 4, 2010
I'm using Fedora 12 since 2 years lately, I really enjoy this S.O., it's quite robust and wonderful, but a couple of months ago it is really slow to boot up when startup the computer, I've checked everything, but seems to be ok, I had a partition lost arround that date, but recover successfully, it happens when I run gparted that It cannot see partition on my 500 GB disk, but still boots up. When running Mandriva live cd, it can see (?) all partitions on that disk, even with Fedora Dolphin I can access this partitions. What could it be?
View 6 Replies
View Related
Nov 14, 2010
I have a Dell Vostro with sda and sdb (the latter was installed by myself). I installed FC14 x86 64 onto sdb with /boot being on /dev/sdb8
I did not want to install grub onto /dev/sda as this is a shared machine. I thought that I would be able to use the BIOS's 'select boot device' to select the sdb disk and boot off that and get into FC that way.
fdisk verifies that /dev/sdb8 is marked as bootable and grub (via find /grub/stage1) confirms that it is installed on hd1,7 (ie /dev/sdb8)
However, no matter which hd is choosen as the boot device, Windows is always booted - I change the boot order to use: DVD, sdb, sda but it still boots Windows. It seems like the BIOS only wants to boot sda no matter what.
View 8 Replies
View Related
Jun 10, 2011
Last time I installed the ATI graphics driver on my PC, it was'nt working fine so I uninstalled that driver. I restarted the PC after uninstalling the driver but then, when PC boots and start running the services the screen just hangs and I don't get into the desktop.
I tried to run the xfs service using service xfs restart and also gdm service using service gdm restart, but in both the cases it shows that Unrecognized Service. So, I think it means that the package for xfs and gdm service is not available in my PC. Is that so?
I tried to get into the desktop by running startx but it gave the following error :-
Fatal Server Error: no screen found
consult the fedora project support at [URL] for help.
check the log file at "/var/log/Xorg.0.log" for additional information.
giving up
xinit: connection refused (errno 111): unable to connect to X server
xinit: no such process (errno 3): server error.
View 1 Replies
View Related
Aug 25, 2011
I've posted this to the fedora mailing list with no response, my apologies if it's been addressed here...
I have an IBM Thinkpad with an Nvidia card ( nVidia Corporation GT218 [NVS 3100M] (rev a2) )
I currently have the nouveau driver black listed in my grub.conf setup: rhgb quiet nouveau.modeset=0 rdblacklist=nouveau
I did the update which installed/updated the following:
---> Package kernel.i686 0:2.6.35.14-95.fc14 set to be installed
---> Package kernel-devel.i686 0:2.6.35.14-95.fc14 set to be installed
---> Package kernel-headers.i686 0:2.6.35.14-95.fc14 set to be updated
---> Package kmod-nvidia.i686 1:280.13-2.fc14 set to be updated
However when I reboot the system boots to a blank screen, and even the previous kernel boots to a blank screen. I tried installing akmod-nvidia but get the same results
I've restored the system back to before the update for now..
View 1 Replies
View Related
Mar 4, 2010
after fresh f12 install says reboot & i do... no boot menu, boots xp. there's probably a solution, but i don't know it. someone know how to get around this?
View 10 Replies
View Related
Dec 20, 2010
I have Fedora 13 and XP installed on my laptop. Right now it only boots to XP but I have a Fedora Live CD so is there some way I can use the live cd to boot into Fedora and edit or install grub to show up at boot?
View 1 Replies
View Related
Aug 4, 2011
Tried to install fedora on new laptop, boots up to blue screen but no top panel or launcher
View 2 Replies
View Related
Jul 8, 2010
I install security updates - did so and ended up with a copy of fedora that goes into a loop. I suspect the prob is the driver to my video adapter. To run, I need to interrupt grub with an escape. It then shows me two choices the bad one 2.6.32.12-115.fc12.i686 and the old good one 2.6.31.5.- 127.fc12.i686 It defaults to the bad one, I change it to the good one and tell it ot proceed. this is inconvenient
I see that in /boot/grub/grub.conf the 2 systems are described I beleive that if I merely edit that file, taking out the refernece to the bad one, I will be ok That will leave the bad one on the disk but at least I wont have to go thru the ritual of interrupting grub. If I want to delete the bad one - after I've taken care of the grub.conf file, what do I do?
View 10 Replies
View Related
Jan 21, 2011
I updated the kernel to 2.6.35.10-74.fc14.x86_64 and had to reinstall and rebuild the kernel module for my ATi driver as usual, so I edited the kernel arguments at the grub splash screen so that I could boot into single user mode and install the driver (i.e appending the relevant line with '1'). The interesting thing is, the system booted directly into single user mode as root when the system started up. No password was required.
View 6 Replies
View Related
