Fedora :: Fc12: Incoming Ftp Boots SSH Connection?
Mar 24, 2010duplicate ip, my mistakewhen logged into a fc12 server with ssh, and a node tried to connect to the server using ftp...
View 1 Replies
ADVERTISEMENT
Fedora :: FC12 - DHClient Breaks My Internet Connection
Mar 17, 2010Latest FC12 update included dhclient-4.1.1-9.fc12 which fails to configure eth0 after restarting the computer. Had to remove/downgrade to 4.1.0* (and reinstall dracut and NetworkManager(-glib)). There is no config file in /etc/dhcp/dhclient.d so I don't know how to reset dhcp/eth0 to connect. Thought some one smarter than me might have noticed this by now and worked out a solution. Can't tell that anything in Bugzilla sounds like my problem. Might only be x86_64 or KDE-4.4 problem as my 32-bit Gnome install is not affected. Easy enough to grab the rpms, just annoying. Still haven't learned how to keep a package at version x.x with Fedora yet but that's another topic.
View 3 Replies View RelatedNetworking :: Mark All Incoming Packets On Connection?
Apr 6, 2010I have a router which makes two ppp connections. PPP0 is my default route and is an uncapped ADSL. PPP1 is a Local Only (South Africa) account which has DNS resolving to its IP. PPP1 allows certain connections in. I want all packets coming in on PPP1 to be marked so that after they have been routed through our local servers they can go back out over PPP1. Both connections use dynamically assigned ip addresses. I want to use PPP0 to make a connection to one of our stores, but when our stores connect to us they will be using PPP1. All packets from these incoming connections will need to be routed back over PPP1.
View 14 Replies View RelatedUbuntu Servers :: Firestarter Doesn't Allow Anyway To Block Incoming Connection By IP
Sep 19, 2010What is the absolute quickest or easiest way to block an incoming connection by their IP address? I'm running an apache2 LAMP server on Ubuntu 8.10. For example, let's say I'm watching my server error logs and I see someone using a script to check for phpmyadmin and other such folders. Right away I know this is a hack attempt. Firestarter does not allow ANY way to block an incoming connection by IP (to my disappointment) and adding the IP to an apache configuration file requires an apache restart (way too much trouble and time).
View 5 Replies View RelatedGeneral :: IPTables Drop Or Forward Host (Incoming Connection)
May 3, 2010How can I drop or forward a incoming connection from a part of a host like *.alicedsl.de
For example:
The user is connection from *.alicedsl.de on port 12345
So how can I drop this connection or forward to google.com on port 80
Fedora :: Cold Boots Often Take Up To 10 Attempts Before The Computer Successfully Boots?
Oct 29, 2010my desktop pc is acting very strange. cold boots often take up to 10 attempts before the computer successfully boots. after the 1st successful boot, i can expect 1-3 "glitches". here's what happens:
the first few cold boots fail at various points during the boot process. there appears to be no pattern to it. when it happens, the machine is completely locked up. it responds to nothing, except holding in the power switch for 5 seconds. i'll go through this procedure several times.
finally, it will boot all the way to a desktop. from there, once i log it, i can expect it to lock up completely, usually once or twice. and then, finally, the screen will go blank and it will suddenly be back at the login screen.
usually, once i log in that last time, it's at least usable, although hardly stable. watching flash video seems to cause a complete lockup, with the sound looping. it doesn't matter where the content is coming from (videos or similar) nor does it matter which browser i'm using (firefox or chrome). i've stopped visiting videos-type sites in the meantime.
this installation has always been a tad bit screwy. 99% of the time, firefox fails to shut down properly, resulting in a message letting me know that a crash was detected. earlier today, i was alerted to 3 kernel crashes simultaneously.
right now, i'm using the pc, as normal. the random nature of the problems would lead me to believe it was hardware-related, specifically something like memory (ram). however, i installed memtest86+ and ran it. i walked away for 4+ hours. came back, it was running, no errors were found. i stopped the test and booted, trouble-free.
the pc seems to be stable enough for a backup, but this does have me concerned...obviously. i'm debating wiping the drive clean and installing f13, just as a test. if it's screwy as well, it would have to be hardware-related, wouldn't you think??
Fedora :: Circular Package Dependencies - Error "gcc-4.4.2-7.fc12.i686 Requires Libgomp = 4.4.2-7.fc12"
Apr 18, 2010I have a tricky problem which I could soIve with a c program. I wrote one and found I didnt have gcc so I tried to install it. I was told I needed to install packages. I acknowledged and an error was generated gcc-4.4.2-7.fc12.i686 requires libgomp = 4.4.2-7.fc12 I try to install libgomp and go round again.
View 2 Replies View RelatedUbuntu Servers :: Incoming Email Not Going Through (connection Timed Out On Mail Server)?
Sep 1, 2011I have been trying to solve this problem for two days now looking at various forums and websites but can't really figure out what's going on here.I have setup postfix on my ubuntu and I can send emails using "telnet localhost 25" and the ehlo thingy. Apache can also send emails. My problem is with incoming emails. When I try to send an email (through Gmail) I get the following error message:
Code:
Delivery to the following recipient has been delayed:
root@example.com
[code]...
Server :: Proftpd: Unable To Open Incoming Connection: Transport Endpoint Is Not Connected?
Feb 13, 2011Sometime, I got the error messages as I mentioned in the subject:
Quote:
Feb 14 07:46:48 x proftpd[27487]: x - Fatal: unable to open incoming connection: Transport endpoint is not connected
I'm sure there are some clients connect to server at that time. What does this mean exactly? Why did it happen? Below is my configuration file:
Code:
ServerName"ProFTPD server"
ServerIdenton "FTP Server ready."
ServerAdminroot@localhost
[code]....
Fedora :: Incoming Connections Are Not Being Reported To Var/log/secure?
Oct 24, 2009incoming connections are not being reported to my /var/log/secure. I can't see if people are trying to connect. I can't troubleshoot because I can't do anything.
View 5 Replies View RelatedFedora :: Thunderbird: Run An Application On Incoming Mail?
Dec 21, 2009i'm using Thunderbird as mailclient.n i receive a new mail, i want TB to run an application (which blinks my notebook-keyboardlight ).Is there a way to do that?And btw. does someone know, how to minimize TB 3 in the systray of gnome (Fedora 12)?to get the mailnotification icon in the systray?
View 2 Replies View RelatedFedora Networking :: VLAN Not Recognizing Incoming Traffic?
May 29, 2011Before explaining the problem, I have to draw the environment. Because of post size limitations, I'll have to break this post in more than one entry.
Physical view
Code:
+--------+ +---+
|storage1|-----| |
+--------+ | s |
| w |
+--------+ | i | +-------+
|router2 |-----| t |-----|router1|--->Internet
+--------+ | c | +-------+
| h |
+--------+ | 8 |
|router3 |-----| |
+--------+ +---+
Device details
[Code]....
Fedora :: System Update Fails Error "librpmio.so.0 Is Needed By Package Abrt-1.0.3-1.fc12.i686 (updates) Librpm.so.0 Is Needed By Package Abrt-1.0.3-1.fc12.i686 (updates)"
Jan 10, 2010when ever i try to install updates i get shown an error & the updates stop the error i get says "librpmio.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates) librpm.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates)"
View 12 Replies View RelatedFedora :: Build A Rpm For FC12?
Jan 2, 2010I saw that AMZ recently updated the rpm for Fedora to be compatible with FC 11, however the install is still broken on FC12 (obviously since it's built for 11).
My main question is has anyone found a decent workaround, that won't completely hose your system? Should I just wait until they build an rpm for FC12?
Fedora :: Non-KVM Kernel For FC12?
Mar 10, 2010Not wanting to speculate why, in the repositories, Fedora doesn't *also* provide a on-KVM enabled kernel counterpart to the default KVM enabled kernel that *is* supplied, I must say I'm frustrated that they haven't done this simple thing.
Considering that everyone who upgrades to KVM enabled FC12 from a previous non-KVM release of Fedora (like FC10) ... considering that these people will be guaranteed to no
longer be able to run VirtualBox or VMWare Workstation after upgrading, is a disappointing oversight by / or intent of Fedora (one that manifests in *lost productivity*).
And try though you may to install the kernel source RPM and compile it after running "make xconfig" to disable KVM support, you usually can't! Fedora kernel compile attempts often die very early in the "make" process, indicating something like ...
"Kernel compile error: No rule to make target `missing-syscalls'
or some other silliness. And when you successfully compile a "kernel.org" kernel, and try to boot it, you get all kinds of missing library errors (etc).
Given that it would be simple to provide both a KVM enabled kernel (as they do), and also a non-KVM enabled kernel (which they don't) so the rest of us can seamlessly continue to run VirtualBox and/or VMWare Workstation after an upgrade - and avoid getting entangled with deciding whether use KVM or XEN for guest O/S's... it's a frustrating misstep to not have done this basic thing (i.e. include a non-KVM kernel). It was a rude awakening when we tried to launch VirtualBox only to have it fail after the upgrade.
Anyway, has anyone successfully compiled their own kernel for FC12 and not get errors after boot? If so, which sources did you use; and what kernel version? In the meantime I'll try out other kernels and compile options.
Fedora :: Retroshare On Fc12
May 21, 2010Has anyone managed to install retroshare on fedora? Where can i find a howto?
View 4 Replies View RelatedFedora :: Make Rules To Move Each E-mail To The Inbox But Still All Incoming Messages Go Straight To Trash?
Apr 1, 2010Recently did a fresh install of F12, previously used F11 without any problems. Now Evolution move ALL received messages to trash automatically. I have had to make rules to move each e-mail to the inbox but still all incoming messages go straight to Trash.
View 3 Replies View RelatedFedora :: X-windows Fails Under FC12 64 Bit
Nov 19, 2009I recently upgraded my CPU (just before the release of FC12), to a 64-bit compatible Intel Core 2 E7600. Upon the release of FC12 I moved to the 64 bit version (via a clean install).
I noticed that NVIDIA does not work (as many topics on this forum confirm). So I reinstalled and used the FC12 default drivers (I think they are called Nouveau-drivers). This seemed to work, so I ran "yum update", and now all X-windows fail.
KDE complaints: "kstartup4 does not exist or fails" and GNOME also complains (sorry forgot the exact error message)
I'd be happy to send logs, but if these are required, which log you want and where I can find it.
how to get or KDE or GNOME running ? (preferably KDE)
System:
Intel Core 2 Duo E7600 (3.1 GHz)
3 GB Memory (800MHz)
Nvidia Geforce 9600 GT
Mobo: Foxconn P35A01
Fedora :: Tomcat 6 Won't Start Under FC12?
Nov 20, 2009Trying to start Tomcat6, I get the following in catalina.out
dl failure on line 696Error: failed /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0/jre/lib/i386/client/libjvm.so, because /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0/jre/lib/i386/client/libjvm.so: cannot enable executable stack as shared object requires: Permission denied
Fedora :: Butterfly-0.5.3-1.fc12 Keeps Crashing?
Dec 11, 2009Every time I open empathy, I am seeing that message. The messenger itself doesn't have a problem (as far as I can see), but that message really bothers me.
View 4 Replies View RelatedFedora :: Unable To Use Tar.gz On FC12 Amd64
Dec 28, 2009It was a long time since my last post on this forum. The reason for this was that since FC7 I've moved to Debian Etch and then to Ubuntu, but now I'm back trying FC12 amd64 on my machine and seen how it changed.Almost everything is going well until now. After almost two years I see that a great development was made to build and gui to yum, but synaptic is still superior, imho.
Well, as I said, everything is going well with one exception: the *.tar.gz files.
Doesn't matter if I use the gui or the cli. If I try to compress or decompress any file to tar.gz it fails with the error message bellow. All other file types work perfectly.
Code:
/bin/gtar: Child returned status 1
/bin/gtar: Exiting with failure status due to previous errors
As I said, I'm running FC12 amd64. Gnome environment.
Fedora :: Fc12 Firstboot Login
Jan 18, 2010I have just installed fc12, and everything seemed to go well. After reboot I get a line asking for First login:From what I've found, this should be the firstboot thing, but I don't know the login, and can't find any answer with a search.
View 6 Replies View RelatedFedora :: Fc12 Rapidsvn No Menu Bar?
Feb 9, 2010is it me, or is the rapidsvn in FC12 have no menu?I cant find anyway to do "file > edit > preferences", theres no menu bar at all.I've used rapidsvn since FC8 and this is the first time I cant find the menubar lol.
View 1 Replies View RelatedFedora :: See All Messages Given Out By Fc12 System?
Feb 19, 2010I'd like to see all messages given out by my fc12 system. So no graphical interface shows up when I shall type the bootloader-password or log-in with my user.
View 1 Replies View RelatedFedora :: Azureus Cause FC12 To Hang?
Feb 20, 2010Just upgraded to FC12, but when running azureus, it hang the entire system.Anybody had the same problem. I tried both yum installed and download from azureus site.
View 2 Replies View RelatedFedora :: Upgrade From CentOS 5.4 To FC12?
Feb 23, 2010I install CentOS 5.4 on a customer's workstation. They out-of-date nature of Enterprise is not at all working out for him. Since Enterprise is essentially FC6, is it possible to just upgrade him to FC12, or am I looking at a wipe and reinstall?
View 7 Replies View RelatedFedora :: FC12 - Networking Isn't Working ?
Mar 5, 2010I installed Fedora Core 12 on a Dell Latitude 610 laptop. Networking isn't working. I tried to start networking with '/etc/rc.d/init.d network start': there were no errors or warning messages, but before and afterwards, I could not ping anything.
I tried to configure and start networking with system-config-network. The ethernet network card shows up, but the activate button is greyed out.
I can ping the loopback address 127.0.0.1 after I start networking with '/etc/rc.d/init.d network start' but I don't really know what that means.
lspci tells me that my network "card" is a "NexXtreme BCM5751 Gigabit Ethernet PCI Express".
I know the eternt cable is good because I used it on another machine.
Fedora :: CD/ DVD Burning 2.6.32.9-70.fc12.x86_64
Mar 23, 2010I have been unable to burn CD's / DVD's while logged into FC12 with a full GDM session or with just the Gnome Greeter running. If I drop to single user mode and use wodim I can burn w/o issue.
GDM 2.28.2
KERNEL 2.6.32.9-70.fc12.x86_64
Fedora :: Floppy Won't Mount Using FC12
Mar 27, 2010I've looked at a couple of threads on this subject but can't cure my Pb. I have a floppy drive that I rarely use. Last time was on an earlier version of FC without problems.
View 8 Replies View RelatedFedora :: Xset Led 3 Does Not Work With FC12
Apr 27, 2010I have 2 Fedora 12 installs with this problem. Before installing FC 12, xset led 3 worked fine.
The command:
SHOULD turn on the scroll lock LED.
With FC 12, it doesn't.
In Xorg.log, I see: (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(I believe before FC12, I was using driver "kbd".) The man page for kbd shows the options needed for program control of the LEDs.
The new driver appears to be "evdev". I've read some of the HAL documentation and I think this driver uses the file: /usr/share/hal/fdi/policy/10osvendor/10-leds.fdi
I see nothing about program control in this file.
Anyway, anyone have any idea why xset led stopped working and how to go about fixing it?