Fedora Hardware :: F12 Rtl8187se Via Ndiswrapper: Shows Up, But Can't Connect To Network?

Feb 21, 2010

I have an Eeepc 900HD with a rtl8187se wifi card.I have used ndiswrapper (w/Win XP drivers) for it.Some info:

uname -a = 2.6.31.12-174.2.19.fc12.i686.PAE #1 SMP
lspci |grep RTL
01:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller (rev 22)

[code]....

View 1 Replies


ADVERTISEMENT

Fedora :: Install Ndiswrapper W/no Network Available?

Nov 23, 2009

I really wanted to try out Fedora 12, but my workstation does not have a LAN available so I am using a usb-dongle - netgear wg111v2. My problem with Fedora is that it doesn't install ndiswrapper or maybe I just didn't see it. How do I install ndiswrapper when I cannot connect my workstation to internet?

View 12 Replies View Related

Fedora Networking :: 14 X64 Ndiswrapper Modprobe Ndiswrapper Module Not Found?

Jan 28, 2011

i've patched the source files to be installed on f14 and finally got a succesfull install, ndiswrapper -l comes back with driver installed and presentwhen i run modprobe ndiswrapper i get "FATAL: Module ndiswrapper not found" after many hours of google searching and reading various threads i cannont seem to find a solution to this apart from manualy coping the ndiswrapper.ko file but when i use that solution modprobe starts ndiswrapper but there is no wlan0 present in iwconfig.now for some reason even wheni move the ndiswrapper.ko file manually it still is giving me that error. this worked earlier as i mentioned but then i reinstalled ndiswrapper hoping something went wrong but still got the same error so i tried that same fix and i'm still getting that error. i can't figure out what i migt've done differently earlier but i'm not having any luck.

View 1 Replies View Related

Fedora Networking :: How To Install Wireless RTL8187SE

May 10, 2011

I'm new in Linux and would like to install my wireless realtek which is installed automatically by most Linux distros but not in fedora. The fedora 12 is not installed my wireless, fedora 13, 14 and now 15 is not either.
How do I install it? Will we ever Fedora automatically install this?

View 2 Replies View Related

OpenSUSE Network :: Firewall Yast2 Shows Ports Open, Nmap Shows Them Closed?

Jan 8, 2010

I'm encountering a strange problem. I need to open and forward all UDP and TCP ports related to VoIPtelephony (5000:32000) in the Suse 11.1 server that's acting as router/firewall in our setup. The ports must redirect to a Asterisk server in the local network. (This server has the IP adress 192.168.0.3)I've opened ports in Yast (Firewall>Ports>Advanced) and putted in some masquerading rulesirewall>Masquerading):0/0,192.168.0.3,tcp,5000:31000,5000:310000/0,192.168.0.3,udp,5000:31000,5000:31000when I do a nmap localhost I get:Starting Nmap 4.75 at 2010-01-08 16:52 CETInteresting ports on localhost (127.0.0.1):

Not shown: 991 closed ports
PORT STATE SERVICE
21/tcp open ftp

[code]....

View 9 Replies View Related

Fedora Networking :: NetworkManager Shows No Wireless Network?

Nov 27, 2009

I'm having trouble getting this wireless card to work. I installed the broadcom-wl driver on Fedora 12.

Code:
[xxx@localhost ~]$ uname -r
2.6.31.6-145.fc12.x86_64
[xxx@localhost ~]$ lsmod | grep wl
wl 1278432 0
lib80211 6436 2 lib80211_crypt_tkip,wl

The card is recognized by System--admin--network as the correct card (BCM43XG) and assigned eth1. However, NetworkManager shows no wireless network. I have a great signal on the same machine if I boot into a Windows partition.

View 4 Replies View Related

Ubuntu Networking :: Can't Connect After Using NDISWrapper / Make It Possible?

Jan 2, 2010

My wireless card (an Atheros AR928x) was not performing very well. At the suggestion of a friend I tried to use NDISWrapper (using the ndisgtk GUI interface) to see if a Windows driver would work better. I found the XP drivers online, tried several versions and, after none worked, I decided that I might as well settle with the crappy quality of the Linux driver and let it go. Sadly, that may not be possible.

I removed the drivers (again via ndisgtk) and now the laptop can't use the card at all. It won't detect any networks (even when just five feet from the router) and I'm not sure what's causing this. I've tried rebooting and rebooting into an older kernel. I checked lspci and it still recognizes the card.

Any idea what's up and how I could fix it?

View 8 Replies View Related

Ubuntu Networking :: Ndiswrapper - Connect To The Internet

Mar 21, 2010

I have tried to get ndiswrapper to work on an ubuntu 9.04 32 bit system but have yet to succeed. After installing the windows driver, the usb wireless network adapter is recognized but will never connect to the internet. I have disabled the driver included with jaunty. Now what makes this strange (at least to me) is that ndiswrapper works perfectly with ubuntu 9.04 64 bit. It could very well be something that I am not doing in the 32 bit system (but I don't know what that might be).

I have tried ndiswrapper with several other distros with the same result. So, I don't think it is specifically related to ubuntu however, since ubuntu is what I am using, I am posting in this forum hoping that someone might be able to help me. I have several 32 bit machines I would like to set up but cannot until I get this resolved. I have also tried downloading and compiling a native driver with no success either. Anyway, here is my setup:

PC with AMD64 dual core processors running at 2Ghz and 3 GB ram.
Belkin N150 Enhanced Wireless Router
Belkin N150 Enhanced Wireless USB Network Adapter

And an aside: I am using WICD network manager and would like to know what the tray icon means when it says it is connected at say 54%. My question is, 54% of what? In windows this info is given in Mbps which is more meaningful.

View 3 Replies View Related

Fedora Servers :: Samba Shows Up Is Router And Home Network

Aug 4, 2011

Linux and have a western digital server (my book world edition) I can access it with Ubuntu 11.04, just by downloading Samba and then by clicking on network and the server shows up, but with Fedora 15, after I have installed Samba, I click on network and all that shows up is my router?

View 1 Replies View Related

Ubuntu Networking :: Can't Connect Wireless Using Ndiswrapper Wg113v3?

Aug 10, 2011

I just got a new pc and installed ubuntu 10.04. I have not yet been able to connect wirelessly, but can connect using a hardwire connection.

Code:
kyle@Gracie-pants:~$ ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.

[code]...

View 9 Replies View Related

Ubuntu Networking :: Wireless Network Icon Shows "lock" Icon When Trying To Connect

May 16, 2010

3 computers in the house run various windows based programs and everything is fine with them connecting to the internet as far as putting in the security password to log in and get online.My old back up computer that I use in the basement that has Ubuntu 9.10 was working fine with the secured network situation up until today.I booted up the computer this morning and it automatically connected as it typically does and I was reading some email and then the computer froze, which on rare occasions it does.

Upon reboot I got a window that asked for the password for the Network Manager Applet which I supplied and then it asked for the password for the secured internet connection which I supplied.It would not connect. After numerous tries of disabling the wireless and enabling the wireless and entering the Network Manager Applet password and the secured internet password I still get no connection.

I notice that when it is trying to connect, the window comes up on the screen that shows that there is reception from the modem, but there is also a little "lock" icon like I'm locked out of the connection.I finally found a way to get rid of the Network Manager Applet password problem but that still didn't alleviate the connection problem.

View 2 Replies View Related

Fedora Networking :: Wireless - Shows Up In The Network Manager - Does Not Get An Ip Address From DHCP Server

May 24, 2010

I'm using a D-Link Xtreme N PCI express wireless adapter (DWA-556). It shows up in the network manager.

However it does not get an ip address from the DHCP server. Below is what I get in the messages log:

View 1 Replies View Related

Ubuntu :: Error Inserting Ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper

Dec 18, 2010

I have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing

ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper

I have this error:

FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted

View 4 Replies View Related

Fedora :: Software Update Servers Down - System Monitor Shows Practically No Network Activity

Aug 21, 2011

I tried to do a scheduled software update several times today (8/20/11) and nothing seems to download, though I do get the "Downloading" PackageKit dialog message (the System Monitor shows practically no network activity). In between tries I downloaded some 600 MB .iso files (about 10 minutes each) so I know my internet is working properly. That leaves either PackageKit got hosed in my last update, or servers are down.

View 2 Replies View Related

Ubuntu Networking :: RTL8187SE Not Working

Aug 7, 2010

I'm running Ubuntu 10.4 on a Toshiba L500-00U Laptop, with a Realtek RTL8187SE wireless network card. The hotkey to turn on the wireless card doesn't work, when I click on the networking icon on the top panel of my screen the Wireless Networks section is grayed out. The only proprietary driver 'Hardware Drivers' could find was a driver for my integrated graphics chip. NDISwrapper didn't help. I don't have a windows partition from which to turn on the wireless card.

View 3 Replies View Related

Debian :: NetworkManager Applet Shows No Network While Connected - Wired Network Device Not Managed

Oct 30, 2010

I'm running Squeeze and I'm looking 3 days now for a solution in some weird problem. The NetworkManager Applet shows that there isn't connection although I am connected. The icon has this small "x" and when mouseover it says "No network conncection". Moreover when left clicking it, it says

"Wired Network Device not managed"

While I was looking for the solution a came across this post by an Ubuntu developer who says:network-manager-applet displays the connectivity state of network-manager's managed interfaces not every interface. So the title "network manager says disconnected but is connected and working" is actually misleading. The interface is connected and working but not from network-manager's point of view since it is not managing the interface. Additionally, in Lucid now network-manager applet displays nothing now for non-managed interfaces so is less misleading. You can check to see whether or not an interface is managed by network-manager by using the command line too nm-tool. You'll see "State: unmanaged" for unmanaged interfaces.

View 14 Replies View Related

Networking :: WPA2 Network - Ndiswrapper Wireless - Ubuntu 9.04 - Reset Router To Get Online

Apr 1, 2010

I've been having a network problem that I've been able to temporarily solve by rebooting the router, but even that can be shaky at times, and it can sometimes disturb others' internet activites, so I'd really like to tackle this while I can. I had an old thread about this, but it's ancient history by now, and plus which, I've got a bit more Linux experience and patience than I did before.

The basic problem is that NetworkManager will associate and connect to my home wireless network, but a) it won't let me ping the router or anywhere else ("Destination Host Unreachable"), and b) the connection lasts for maybe a couple minutes at most. If I reset the router, however, 9 times out of 10 it will associate and connect successfully and I can get online, but I have to run a constant ping to the router with a 10-second interval, otherwise it drops the connection, unless I'm doing a lot of other heavy network activity.

ping 192.168.1.1 (the router):

Code:

I've tried wpa_supplicant, but this is what I get (it's apparently unsuccessful...? ESSID/MAC addresses censored where necessary):

Code:

The last prompt line is included because I cancelled it myself; it didn't abort on its own. If left unmonitored, it basically keeps doing this over and over, with no visible network activity at all.

With NetworkManager, I can keep selecting the network's ESSID over and over, and it seems to reconnect, but I still can't ping out anywhere. I'm using a Netgear WN111v1 wireless adapter with ndiswrapper and the Windows drivers. I have no idea what the chipset is, and I doubt that Linux drivers exist for it, even if I knew what it was. The router is using WPA2 security (hence my trying wpa_supplicant)

lsusb:

Code:

ifconfig wlan0 (while connected; IP/MAC addresses censored where needed):

Code:

ifconfig wlan0 (while not connected; IP/MAC addresses censored where needed):

Code:

Code:

I only include this for format checking purposes. The commented out "psk" is the actual text passphrase, while the uncommented one is (presumably) a hex representation of the same key. Is this correct? I've never done this with wpa_supplicant before, I've only used NetworkManager (which is a pain in the @$$ because it requires X to run, and so it disconnects any time I log out/back in ).

Is there any hope of getting my wireless connection permanently working, so that I don't have to reset the router every time I need to reboot or log out/back in?

View 15 Replies View Related

Ubuntu Networking :: Realtek RTL8187SE Wireless Not Detecting Networks?

Apr 21, 2010

I would hope that the title gives my problem away, but my wireless card is not detecting networks. I'm a total new guy to the Linux world, so please be patient with me. I currently have Ubuntu 9.10 installed on a stock Toshiba Satellite L505D-S5965.

zeus@olympia:~$ lsb_release -d
Description: Ubuntu 9.10
zeus@olympia:~$ uname -mr
2.6.31-20-generic i686
zeus@olympia:~$ lspci -nn | grep -i wireless
02:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8187SE Wireless LAN Controller [10ec:8199] (rev 22)

[Code]...

View 9 Replies View Related

Ubuntu Networking :: No Driver Claimed In Ndiswrapper - Atheros AR5001X+ Wireless Network Adapter?

Feb 26, 2010

I recently switched from Windows XP to a clean install Ubuntu Karmic Koala 9.10 but it seems to be quite a problem to get the wifi up and running. In Windows the nearby network all appeared in network connections but the same section in Ubuntu is empty. So I decided to go with the ndiswrapper guide to solve the problem with an unclaimed driver. After an entire day messing with my computer I'm still not close... Below follows excerpts taken from the Ndiswrapper guide with posted results from my computer. "ndiswrapper won't work until it thinks that your Windows drivers have been properly installed and that they are the appropriate ones for your wireless card. You can run the command: ndiswrapper -l"

result:

WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
net5211 : driver installed
device (168C:0013) present (alternate driver: ath5k)

So I've posted the result the name of my wireless card below: lspci -nn

Result:

00:00.0 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:0259]
00:00.1 Host bridge [0600]: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge [1106:1259]

[code]...

It seems like the network is disabled or unclaimed or both. What to do? I'm stuck after spending an entire day trying to install the wifi. I had no problems in Windows XP but it seems to be quite impossible in Ubuntu.

View 7 Replies View Related

Fedora Networking :: Connect The Network Where The Openvpn Client Is,throught The Computer With The Client To The Other Network?

May 20, 2009

I have the following problem:I have to networks in remote places.I have an opnvpn client in one network that connects to the the router (openvpn server).My question is,can i connect the network where the openvpn client is,throught the computer with the client to the other network.If yes,how? (please make it an idiot proof anwser because i have limited knowledge about iptables). I was thinking like forwarding (the router in the network with the openvpn client is also firewalling with iptables) the request of the ip class of the openvpn network to the computer with the client,which masquarades the interface

View 2 Replies View Related

Ubuntu :: Ping Shows Active Computer But Ssh Does Not Connect

Apr 20, 2010

I posted the same problem before but did not get answers, I guess due to the unattractive title. I have two Ubuntu machines, both desktop version with a server installed on top. They are both on the same network. It seems that when I restart the remote computer, I can ssh to it fine for a while but then I get the following:

Read from remote host: Connection reset by peer lost connection.

View 3 Replies View Related

Fedora Networking :: Juniper Network Connect Didn't Work On Fedora

May 16, 2011

I just upgrade my Fedora 14 to Fedora 15 RC1.I found the critical issue for me that Juniper Network connect(SSL VPN) didn't work for me again.I wonder if the network interface name changed impact this, but I am not sure about it as I didn't see any obviously error.I can connect the VPN auth page with my username and password after I switch my Java plugin to Sun JRE( I use google Chrome).As the Java VPN applet started, it appeared for a while and shutdown again. I think the VPN auth has been passed at that time, the problem might about creating the VPN Tunnel.

View 8 Replies View Related

Red Hat / Fedora :: Can't Seem To Connect To My Network / Fix It?

Jul 20, 2010

I bought a new PC with fedora (gnome-based) on it, but i can't seem to connect to my network.
I also have a laptop with fedora 12 which did connect to our network.

I think the problem lies with the new PC, i can't see the NetworkManager icon anymore in the bar, and i don't know how to start it since the NetworkManager daemon failed.
When it was still working I was able to see 1 other network, but on my laptop i was able to see about 10 other networks.
I hope someone could help me fix the networkmanager and possibly help me connect/fix the wireless card.

View 3 Replies View Related

Fedora Networking :: Cannot Connect To Ad-Hoc Network?

Jul 7, 2010

I've created an ad-hoc network using a wireless device I have at home. When the networks shows up in NetworkManager, I select it, the two dots turn green, and it tries connect for about a minute - but eventually fails.Is there a special way you need to go about in order to connect to ad hoc networks?Note: I've tried connecting to it through Windows, and everything works swell...so the problem isn't from my other device - the problem is Fedora.

View 12 Replies View Related

Ubuntu Networking :: Wireless Usb Will Not Attempt To Connect To AP Even Though It Shows In Ifconfig And Iwconfig?

May 28, 2011

My wireless usb will not attempt to connect to my AP even though it shows in ifconfig and iwconfig:further information which i believe may helplspci -v

00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
Subsystem: VIA Technologies, Inc. Device aa08
Flags: bus master, 66MHz, medium devsel, latency 8

[code]....

View 1 Replies View Related

Ubuntu :: Connect To TV - Tv Shows Desktop Not Full Thing While Computer Remains Same

Jun 2, 2011

I connect my laptop to my TV (1280 X 720) and mirror the images, having the same exact display on both the computer and the television. I tried doing this with another laptop (core2duo with nvidia gforce 9600) and the tv will show the desktop (not the full thing) while the computer remains the same. This is not usable. I tried using the nvidia settings application but to no avail.

View 1 Replies View Related

General :: Shows All Folders Like Root - Boot When Connect Sftp Server

Dec 3, 2010

I am configure one sftp server(openssh) in my linux server. Its working fine. but when i try to connect its shows all folders like root, boot. but i need particular folder only. how to do this. I am using centos5.2

View 2 Replies View Related

Red Hat / Fedora :: Getting Ndiswrapper On 13?

Jun 6, 2010

$ su -c 'yum update'
su -c 'yum install kmod-ndiswrapper'

and i get:

presto, refresh-packagekit
Setting up Install Process
No package kmod-ndiswrapper available.
Nothing to do

what in the blazes do i have to do to get ndiswrapper?

why is linux so deliberately difficult ALL THE TIME. I have almost 2 university degrees and I can't get anything working on linux!

View 1 Replies View Related

Fedora Networking :: Network Does Not Connect Automatically

Mar 28, 2009

I have fc9 installed on my system and I am facing a weird problem When I login to my machine (both as ROOT and USER) I do not get connected to the Internet automatically. I have to right click on the n/w Icon on the task bar, disable it and enable it gain then I get connected.

View 8 Replies View Related

Fedora Installation :: Connect With The Wired Network

Jul 7, 2009

I installed Fedora 11 on my computer with the live cd. If I run the live cd, the network connection is active. But, after the installation the cannt connect with the wired network. I must use an internal Server to connect the www. The server controlls my mac address and if it correct, the server allow the connection. ipconfig and the network manager can read the correct mac address. Why it does not work

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved