Debian Configuration :: Installing ATI Open Source Drivers
Mar 1, 2016
I just set up a computer with debian (im no linux expert) and now i have trouble with getting the packages for my graphics card (its an RV635)
Im tried to do it like this page says: [URL]....
However when i try to Code: Select allapt-get update he throws an error:
W: Fehlschlag beim Holen von http://httpredir.debian.org/debian/dists/jessie/Release Erwarteter Eintrag »nonfree/binary-amd64/Packages« konnte in Release-Datei nicht gefunden werden (falscher Eintrag in sources.list oder missgebildete Datei)
View 1 Replies
ADVERTISEMENT
Sep 11, 2015
The ATI/AMD graphics hardware is:
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Oland [Radeon HD 8570 / R7 240 OEM]
I installed "AMD/ATI Open Source Drivers" according to: "[URL] ....":
Reboot after "apt-get install firmware-linux-nonfree", the system automaticly reboot after grub, then went black screen forever (no tty1,tty2.., seems cannot booting). I reinstalled serveral times but same problem (having tried both cd/live dvd, debian8.1/8.2).
It seems that "firmware-linux-nonfree" is the cause, since debian crashed once firmware-linux-nonfree installed.
The problem went away by installing ATIProprietary driver("[URL] ....").
PC is dell 9020, i7
View 6 Replies
View Related
Feb 21, 2010
I'm running a Squeeze system on a PC with an ATI Radeon HD 4200 graphics card. Until recently I had been using the fglrx drivers without difficulty, but a recent upgrade removed fglrx - apparently this is because ATI has yet to release drivers for Xorg 1.7. So I've switched to the open source driver (radeon), but am not getting any 3D acceleration - hence can't run desktop effects in either kwin or compiz. When I run "glxinfo | grep OpenGL" I get the following:
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.6.1
OpenGL shading language version string: 1.20
OpenGL extensions:
It's the software rasterizer that is the problem, I gather. After Googling for similar problems encountered by others, I've installed firmware-linux and firmware-linux-nonfree, but to no effect. All fglrx-* packages are purged. Does anyone have any other thoughts? (I don't currently have an xorg.conf file in use.)
View 10 Replies
View Related
Sep 10, 2014
My questions is about switching graphics card on a Intel/AMD hybrid system using open source drivers (Envy 15 with HD4000 and AMD 7690M). I was waiting for an proprietary driver from AMD but apparently it will not be released in the near future and I need to use AMD chip for my 3D intense applications.
View 0 Replies
View Related
Jul 9, 2011
I have a fresh install of Debian Squeeze AMD64 which I'm trying to install KVM on. I have no idea what I'm doing so I figured someone on these forums might be able to explain it. I have already verified VT support and enabled it in the bios. I have googled and read about KVM installation but everything I can find is either confusing or doesn't work. Also I am trying to install it from source because I want to experiment with modifying it later.
View 10 Replies
View Related
May 12, 2011
I have a Broadcom BCM4312 LP-PHY in this machine. I was informed theres an open source driver for broadcom cards (brcm80211), but it doesn't seem to support this chipset. In the spirit of Debian, is there another driver available?
View 2 Replies
View Related
Jan 2, 2009
We all know we can install a linux system such as Fedora 10 and use it. Being linux, one should in principle get the source codes for everything that has been precompiled (except the proprietary drivers such as nvidia) in the installation DVDs/CDs. Where are the source codes ? Is there a place I can download them ?
To avoid confusion, I am not referring to the kernel source that can be compiled to give a linux kernel, but that does not include the drivers, such as intel_drv.so.
To be more specific, the intel graphic i810 driver has been built into any linux system, but where is the exact source? One answer may be that primary source intellinuxgraphics.com. However, if anyone tries to download the every changing (i.e., keep updated almost every single day) driver source codes from freedesktop.org, it is almost certain that the source codes will not be the same as the one that is finalized in Fedora 10.
View 9 Replies
View Related
May 27, 2011
I need some help installing the driver. I am very noob. so when I try to build a deb file with sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing
# sh ati-driver-installer-11-5-x86.x86_64.run --buildpkg Debian/testing
Created directory fglrx-install.7aYYig
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-
[Code]...
View 12 Replies
View Related
Jan 19, 2015
I just installed debian (Jessie) in my computer and tried to install Nvidia drivers. This is a task i have done many times and never got a problem but today...
Here you have my output...
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.0-4-amd64 x86_64 Debian
Current Operating System: Linux PC-Server 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ck
[Code] .....
View 7 Replies
View Related
Sep 17, 2015
I'm new to Debian and installed it with Cinnamon because I want to learn some OpenCL programming in Linux. I have a Nvidia GT 525M GPU. Once the operating system is installed, I followed [URL] ..... article to install the proprietary Nvidia drivers. As the forum suggested, instead of creating an Xorg server configuration file, I installed Bumblebee according to [URL]..... article.
But when I restarted my machine after completing all the steps when I try to log in I get the follwoing message:
"failed to load session 'cinnamon'"
I cannot login as normal user or root.
View 1 Replies
View Related
Sep 1, 2011
I need to install wheezy nvidia-graphics-drivers because my video card (geforce GT 425m) isnt supported on the squeezy version. I downloaded the wheezy source code and built it on my squeezy system, some .deb files where created, the problem is I dont know which of those to install, these are the files:
libcuda1280.13-1amd64.deb
nvidia-glx-ia32280.13-1amd64.deb
libcuda1-ia32280.13-1amd64.deb
[code]....
View 7 Replies
View Related
Apr 22, 2010
I have been testing with the ATI Catalyst drivers. I have made a package from the 9.12. I have found that they were not working the way I want, so i tried to switch back via synaptic. I have removed everything which had to do to "fglrx"
now when I restart, here is the message i get
Quote:
UBUNTU is running in low graphic mode The following error was encountered. You may need to update your configuration to solve this. (EE) failed to load module "fglrx" (module does not exist, 0)
For information, it does start in low graphic mode. I have reinstalled the "fglrx" module, but the problem is still the same. If I reinstall the fglrx drivers from synaptic or terminal, I am back with the newer catalyst driver. I cannot switch back to the ubuntu repository one it seem.
I have done the following to try to get the open source back
Quote:
sudo /usr/share/ati/fglrx-uninstall.sh # (if it exists)
sudo apt-get remove --purge fglrx*
sudo apt-get remove --purge xserver-xorg-video-ati xserver-xorg-video-radeon
sudo apt-get install xserver-xorg-video-ati
sudo apt-get install --reinstall libgl1-mesa-glx libgl1-mesa-dri xserver-xorg-core
sudo dpkg-reconfigure xserver-xorg
I still have the same problem. Now I do not have any package installed with "fglrx" I have reconfigured xserver-xorg and it will only start in low graphic mode.
View 5 Replies
View Related
Sep 9, 2010
any idea if openSUSE will be able to get this into 11.4?Broadcom swims upstream, tackles Linux WiFi woes with new open drivers
View 1 Replies
View Related
Jul 12, 2010
I have been trying to get sound to work through the open source HDMI drivers, does anyone know how to do this?
I get a perfect picture through HDMI but no sound. The ATI HDMI option is not muted and is enabled. I dont know what else to do. I opened a terminal and did "aplay -l" and I can see the device in there. I DO get sound using the proprietary drivers supplied by ATI, but I get screen tearing and makes the picture look horrible.. So for now its Sound vs Picture quality... Why cant I have both :/
View 2 Replies
View Related
Mar 13, 2011
I have an ATI Mobility Radeon HD 5000 series (I believe 5470, but I forget). I installed the open source ATI drivers using instructions at https://help.ubuntu.com/community/RadeonDriver. Wonderfully, this gives me triple monitor support (LVDS, VGA, and HDMI at the same time), which the proprietary drivers couldn't do for me. But now I don't have 3D support (and XBMC crawls horribly as a result.) glxinfo shows me I have software rendering:
Code:
$ glxinfo | grep OpenGL
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.9-devel
OpenGL shading language version string: 1.20
OpenGL extensions:
View 1 Replies
View Related
Apr 3, 2011
I have an ATI Radeon 4200 HD Mobility, with 256 MB of my RAM dedicated to it. I installed FGLRX, but the performance actually dropped compared to the open source drivers that come installed by default. I removed fglrx, and reinstalled the Radeon packages, but no avail.
Now, when I boot, I get the error, "unable to load module 'fglrx'," and my only option is to run Ubuntu in Safe Graphics Mode. This tells me that the computer is still trying to load FGLRX, and there's something that needs to be altered down at the boot level.
View 6 Replies
View Related
May 23, 2011
As far as I can tell, I have the proprietary AMD drivers installed.
I want to install the open source drivers instead to see if I can get better performance.
According to this site, I have to install the PPA to my software sources as instructed here. I've done that. But how do I actually install the open source drivers?
View 9 Replies
View Related
Sep 4, 2010
Last year I had a gui tool for configuring the radeon open source drivers in my old slackware install but now I forgot the name of it. I'm pretty sure it was gtk based and no matter what I type in google I can't seem to find any reference to it. There is a radeontool but that's not it. Anyone know what the name for it was, or something else that provides easy configuring of the open source radeon drivers? I remember it had lots of options to configure including some I've never heard of. Thought it'd be easy to find now since it seemed so officially supported during the time I used it!
View 1 Replies
View Related
Aug 3, 2010
A friend of mine is looking for a cheap PCI graphics card to do TV-out from his PCI only PC for MythTV duties. We've found cheap old PCI Radeon 9200's with TV Out on eBay. These appear to only be supported by the open source drivers now, but will the TV out work with the open source drivers?
View 3 Replies
View Related
Jan 12, 2010
How can I install some open source drivers like radeon or radeonh, I just want make my desktop effects work, can't even watch a movie I have these installed:
Code:
#X -version
X.Org X Server 1.7.1
Code:
#rpm -qa | grep -i radeon
radeontool-1.5-6.fc12.i686
[Code]...
View 4 Replies
View Related
Feb 19, 2010
[URL].. One of my reference link: A very good place for search for drivers since many hardware manufacturers do not have a driver site for open source.
View 1 Replies
View Related
Mar 10, 2010
I am planning to install any Open-Source ( LINUX ) web browser having all dependencies/plugin-ins on one single location [DIR] and share it over NFS to all other users; So all users can run the executable to start browsing local files (Flash Tutorials) without the need of installing a web browser on every single workstation. In my case I am using Red Hat Linux 4 update 7 WS all over my work place.
View 11 Replies
View Related
Jan 22, 2011
I install the ATI drivers yesterday and today I've realised that it broke my sound. I have a HDA nVidia sound card built in (with a Realtek chip), but when I run alsaconf, it doesn't find it. It tries to use either the ATI HDMI audio port or a legacy generic driver. Any hints as to how I can fix this?
View 2 Replies
View Related
Nov 15, 2010
I have a thin client HP t5730 with a ATI x1250 ()Running Ubuntu 10.04 everything works fine, the graphic card is recognized with the open source drivers and everything looks good. I am planning on installing XBMC Live, which is built upon Ubuntu 9.10, and no matter what i do, it never detects the card. I have tried everything, installing the appropriate ATI drivers, installing EvnyNG and the list goes on. Aticonfig still shows: no supported adapters. My question is, is it possible to upgrade to the newer open source drivers that Ubuntu comes with or does anyone have any other idea?
View 1 Replies
View Related
Feb 5, 2011
i understand ubuntu comes with opensource ati drivers installed by default?(Correct me if I am wrong)So does Fedora come with open source drivers installed by default too? or do i need to install them as well.I have radeon x700 card...and there is only one game that i would like to play on fedora 14 is Warhammer 4000: Soulstorm (2008 game)Will the open source drivers be enough or do i need to install the proprietary ones...(and is it hard?).
View 1 Replies
View Related
Apr 9, 2010
while installing ... Installing python2.4-2.4-1pydotorg.src.rpm
warning: user jafo does not exist - using root
warning: group jafo does not exist - using root
warning: user jafo does not exist - using root
warning: group jafo does not exist - using root
error: Legacy syntax is unsupported: copyright
error: line 55: Unknown tag: Copyright: Modified CNRI Open Source License
View 3 Replies
View Related
Feb 19, 2011
how to install Dropbox for Debian Squeeze from source.Please read everything before you begin. I prepared it as I installed Dropbox for my own system. Please Note: I use sudo, you may have to use root or 'su' from the command line. If you don't know the difference between sudo and su, then you shouldn't try this until you know. At the time I did this, the lastest dropbox version was 0.6.7.
View 7 Replies
View Related
Aug 23, 2011
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail� or so Failed to open /proc/filesystems: No such file or directory
[Code]..
View 14 Replies
View Related
Feb 21, 2010
I just finished installing Debian 2.1 on a very old laptop for some light word processing and web browsing, and am trying to get apt working so I can use it and dselect to install packages. Whenever I run apt-get update as a first step, I get stuck at 0% with an eventual timeout (this also happens when running the update step of dselect).
I know that my network card (a Farallon EtherWave) is working because I can ping my local gateway and remote sites. In my sources.list, I have this line for the Debian archive for this release: deb [url]contrib main non-free
Can anyone think of why I can ping the archive successfully, but apt will not read it? Do I need to change some network configuration, or my source line?
View 4 Replies
View Related
Feb 13, 2010
I always wanted to get into writing open source applications for debian. The only problem I ever saw was that I do not know C++ which seems to be the popular language to build applications. My expertise is Java and I think that java applications could run on debian just as good as C++ applications. What I do at work is write applications in java for unix systems so I think I porting my skills over to debian would not be a problem. I have not seen any applications in java on debian yet and thought people might have a problem with them. Is there any reason more java applications are not being written on debian? Also does anyone know of hand if there is any orphaned java application for debian. I had a look on this page but it is hard to know what language the application is written in. [URL]
View 5 Replies
View Related
