trying to use a source file, but it does not seem to be working. I tried this website [URL] after running rpm -ivh <rpm-name>.src.rpm nothing is in /usr/src/redhat/SPECS I have searched for .spec files , can not find any.
View 2 RepliesI have a problem about to open zebra service after install quagga by command(./configure ; make ; make install ) and add service port ("/etc/services")
#service zebra status
zebra dead but subsys locked
and can't telnet to zebra
"telnet: unable to connection to remote host: connection refused"
I following a manual http://www.quagga.net/docs/docs-info.php but it's not perfect.
When I want to update with synaptic I get this error:Ophalen van ts/Release is mislukt Unable to find expected entry 'iceweasel-5.0/source/Sources' in Release file (Wrong sources.list entry or malformed file)Some index files failed to download. They have been ignored, or old ones used instead.
View 2 Replies View RelatedI played a bit with the upgrade configuration files, to solve a couple of problems I have with Ubuntu 10.04, now when the upgrade procedure starts I getQuote:Failed to fetch Release Unable to find expected entry multiversdeb/source/Sources in Meta-index file (malformed Release file?)Some index files failed to download, they have been ignored, or old ones used instead.
View 9 Replies View Relatedopening a ram stream with RealPlayerthe following:ALSA libpcm_dmix.c:1010:snd_pcm_dmix_open) unable to open slave,and no sound, on 99/100 connections. Has anybody the same problem? What can I do to solve it?[URL]
View 3 Replies View RelatedI couldn't compile gammu-1.28 on my Fedora 13 when running ./configure.To make sure what i'm doing, i was install cmake from fedora repository directly using "yum install cmake" and completed. And then to make sure again, i was update my gcc using "yum update gcc". But there was still errors during running ./configure. Finally, i decided to update all needed inside my fedora using "yum update" to make sure again.
View 7 Replies View RelatedI am getting virtual-box repository download error as given below:
Code: Failed to fetch http://download.virtualbox.org/virtualbox/debian/dists/maverick/Release Unable to find expected entry non-free/source/Sources in Meta-index file (malformed Release file?) Some index files failed to download, they have been ignored, or old ones used instead. Repository: deb http://download.virtualbox.org/virtualbox/debian marverick non-free
I need to install it on laptop along with linux, which of the two files should i download and burn?
View 1 Replies View RelatedI am following instructions from [URL]... i've gotten to the point where it says
[code]...
No such file or directory. I hate installing from source for this exact reason, something always goes wrong. and i'm left scratching my head. But I really want this boot loader.
I have downloaded the linuxdcplus 1.0.3 source file. However i am unable to install the same in my fedora 11. could anyone guide me and all with detailed step by step instructions and the possible options?
View 1 Replies View RelatedI am new to linux platform and my requirment is to write a makfile which can compile a tree for source file and create the output in separate directory .
View 1 Replies View Relatedinstalled the fedora 12, but dont know how to use the source dvd to install the source package.
View 3 Replies View RelatedI had a situation in which the the path of the file to be copied is written in other file and I had to copy it using shell script..I can use cp $(cat /home/robert/location.txt) /media/sda1 on normal linux shell...But I am using buildroot script where $(cat /home/robert/location.txt) evaluate to nothing..is just blank..
View 1 Replies View RelatedI am trying to compile C source file to generate .trb file (turbo file) which will then burn on trubo sim using TP2. When I comiple the code following error is occuring. before going through belwo error I was getting error 'Unknown MCU atmega128', known MCU are: (list appread), then I change the configuration and set the MCU to supported list then following error is occuring.
XXXXXXX@MYN8G5R52S /home/my-aip/my-aip
$ make
avr-ld -o my-aip.elf my-aip.o -L../../turbo-devel/lib -T turbo.lds -d -r --emit-
relocs -R ../../turbo-devel/lib/public_calls -lformlib -laes -lm -lc `avr-gcc -p
[code]....
Now strange thing is that whats so ever the value is of atmegs.. is I am facing same issue.
Im trying to run a program but my system won't let me.i used to be able to run executable files without a problem but i can't anymore when i double click the file i get "there is no application installed for executable files" i am unable to check "allow executing file as program" in file properties there is a script file which runs the program but all i get from the terminal is "permission denied"
View 14 Replies View RelatedI am about to decompress a source file $$$.tar file? In what place do you decompress a tarball? I do know that I will be entering ./configure, make.
View 3 Replies View RelatedI am not able to delete any file. I am seeing following error when i am trying to delete. "The trash has reached its maximum size! Cleanup the trash manually.".
But Trash is already empty and the file i am trying to delete is only 28bytes.
the folders '~/.local/share/Trash/files' and '~/.local/share/Trash/info' are also empty and there permissions are also correct. file manager is dolphin.
i saw this problem happening after firefox crashed.
I found a file ~/.local/share/Trash/metadata with following content- [Cached] Size=18446744068999530549
After setting SIze=0, i am able to delete files.
unable to compile a simple C++ programme (.cpp file), on compiling the file with gcc or g++ the following error is displayed, but the above command works in Redhat EL. the error message is:"fatal error: iostream.h: No such file or directorycompilation terminated."an anybody suggest to compile a C++ programme in Fedora 14.
View 10 Replies View RelatedWhen I attempt to start the install of a .bin file, the prompt is returned almost immediately, no error messages. I have installed other .bin files with no problems. From the file directory I am typing ./file_name.bin. The file has -x from all levels.
View 4 Replies View RelatedI want run binary files but shoot my errors that "Cannot Execute Binary file" I try with ./file, bash file etc i'm using fedora12 with KDE Desktop this happends with all binary files
do you know which extension is?
somebody knows why i cant run?
I installed windows xp, then wanting it off, I formatted Windows NTFS partition from live cd of fedora. Now PC start with a menu to choose between the two operating systems with a countdown. I tried to clean up the grub file by deleting the last three lines for the MBR but with poor success. I would like to cleaning my Fedora 14 start ...
View 6 Replies View RelatedSomehow I managed to create a file in /some/dir/ called "-v". How can I remove it? I've tried various and many methods... rm, rm *v, moving all files except that one and then issuing rm -rf but the problem is the -v file is being taken for a switch.
View 4 Replies View RelatedI'm a fresh user of Debian 6 64 Bit. I'm trying to install wine on it to run bluestacks. URL... but when I use the following command, it can't seem to fetch some files/packages. I have these as my sources list at the moment.
sudo nano /etc/apt/sources.list
deb http://ftp.us.debian.org/debian stable main contrib non-free
deb-src http://ftp.us.debian.org/debian stable main contrib non-free
deb http://ftp.debian.org/debian/ wheezy-updates main contrib non-free
deb-src http://ftp.debian.org/debian/ wheezy-updates main contrib non-free
[code]....
I am trying to install a DR rootkit into ubuntu for an assignment, im using vm ware but can only get as far as extracting the rootkit and not being able to compile the source code.. when i use the ./configure command it says there is no such file or directory and when i use the make command it keeps getting errors.
View 2 Replies View RelatedI am unable to access the File Management properties.I go System > Preferences > File Management.I get a "Bug Buddy" window (I filed a report, details below).Or, it also happens if I type: 'nautilus-file-management-properties' in the terminal.
View 3 Replies View Relatedi'm having some difficulties will my wireless on my friends hp dv4. It has a bcm4312 card and so far i've downloaded the kernel headers and the devel pakages, aswell as the broadcom hybrid driver. After i've un tar'd the file i type in make and it come up with
KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd`
make: *** /lib/modules/2.6.34.7-61.fc13.i686.PAE/build: No such file or directory. Stop.
make: *** [all] Error 2
but as for my knowledge of linux i'm at my limit, if it wasn't for Archive Manager i probably wouldn't have been able to untar the file
I'm having trouble installing software from the source files. From what I can gather the problem lies with not having the correct c libraries installed. My understanding is you use the ./configure, make, and make install commands in a terminal to install. And that the configure command checks to see if you have everything to install. this is the output when I try to configure:
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
[code]...
Using AWN 0.3.9 on Ubuntu 9.10. AWN calendar applet returns the message "Unable to return calendar data from external source" when started. It is configured to read Evolution which is functioning normally.
View 4 Replies View RelatedI am using "curl" command line tool to upload file to ftp server through ftps.I have also tried with the "Secure FTP" software from windows using Implicit mode, which works fine while transfering files.Command as follows:
curl -vk --ftp-ssl -u [username]:[password] ftps://ftp.hostname/directory/test.txt -T /tmp/text.txt --ftp-pasv --disable-expsv
Login to server successfully but geting error while start to transfer data. The verbose
[code]....
I restore tape backup on my Linux server. At the time of booting the server it cannot able to read the filesystems.
I am getting the following message,
Code: Your system appears to have shutdown uncleanly
Forcing file system integrity check due to default setting
Checking root filesystem
fsch.ext3: file system has unsupported features (S) (/)
e2fsck: Get a never version of e2fsck! (FAILED)
*** An error occurred during the file system check.
*** Dropping you to a shell; the system will reboot
*** when you leave the shell.
Give root password for maintenance (or type Control-D to continue):