I installed kvm via the package manager but running "qemu" gives the output:
Code:
Could not initialize KVM, will disable KVM support
I'm in the group "kvm" and /dev/kvm exists but seems... empty
I'm not familiar with KVM, QEMU and virtualization technology...
I'm running Fedora 15/2.6.38.6-27.fc15.x86_64. When I run <code>qemu</code> I'm getting "Could not initialize KVM, will disable KVM support" I know my CPU supports hardware virtualization, it has the vmx flag (grep vmx /proc/cpuinfo). I've checked that:
1. kvm and kvm_intel modules are loaded
2. /dev/kvm exists.
3. I'm in the kvm group, so I can access /dev/kvm..
Why KVM doesn't work?
Have Opensuse disabled support for Iomega external parport zip drives? I can mount the zip drive under Debian Lenny running the 2.6.26 kernel without any problems. Under Opensuse 10.3 (installed) and Opensuse 11.2 (liveCD) I can't access the drive. Opensuse doesn't recognize it.
All of which is odd. When I installed 10.3, the zip was seen an configured in fstab as /dev/sdc4 mounted at /media/zip. It worked fine for a while, then quit. Now, /dev/sdc4 doesn't exist. Kde control center says (hardware - partitions) says is there but not mounted. Hwinfo doesn't show it; modprobe imm does nothing.
I'm at a loss for ways and means to get Opensuse to recognize my zip drive.
I am having following problem. If I try to change my SMB password, it throws following error >
Quote:
~>smbpasswd
Old SMB password:
New SMB password:
Retype new SMB password:
Server did not provide 'target information', required for NTLMv2
rpc_pipe_bind: rpc_send_auth_reply failed.
machine 127.0.0.1 does not support SAMR connections, but LANMAN password changed are disabled
Failed to change password for user1
i just installed MATLAB but while i can load it from shell by typing matlab, when i make a panel application launcher and inform it with the path /usr/share/matlab/bin/matlab it does not start.
View 2 Replies View RelatedI have searched for like 35 minutes for a fix, I had the 3.6 installed on my f12 box but it worked buggy so I went in packet manager and removed it then yum uninstalled it. And tried to revert to the one that initially came with this build but now it won't start up at all.
View 2 Replies View RelatedI was trying to intall Fedora-11-x86_64-DVD. But during intallation a line shows "waiting for hardware to initalize... " & then stops processing. I waited for 1 hour but nothing happens. What should I do? How to install fedora on my system...
Pentium D 2.8Ghz
1gb ram
I want to install fedora 11 on my pc, earlier I had fedora 7. But while installing fedora 11, its stopping at the point telling: Waiting hardware to initialize and its getting stuck there.
I have :
- Pentium D 2.8 GHz processor
- 512 MB RAM
I receive following error when trying to enable strigi. "strigi service failed to initialize, most likely due to installation problem" I have searched internet, obviously not good enough, and i have found nothing. Nothing that would work. i have tried installing openjdk-devel as suggested, soprano. And still nothing. I have same problems on both boxes running Fedora 12.
View 1 Replies View RelatedRecently I started getting pop-up saying:
Code:
Failed to initialize
Failed to initialize packaging backend
This may occur if other packaging tools are being used simultaneously.
under more details i get:
Code:
There are unfinished transactions remaining. Please run yum-complete-transaction as root. I get to terminal, and as a root I try yum-complete-transaction, but it just says there are no unfinished transactions left. I tried to update thru yum, but this is what I get:
Code:
# yum update
Loaded plugins: fastestmirror, presto, refresh-packagekit
Determining fastest mirrors .....
After lots of googling, I tried:
"yum clean all",
"yum-comlete-transaction",
"rm -f /var/lib/rpm/__db*" + "rpm -vv --rebuilddb" + "yum clean all",
Everything else is working well, and I am able to update with "--skip-broken", but I keep getting this pop-ups. I use fedora 12.
Since Livna went down, I've been having having problems with KPackagekit. I disabled the Libna repo by setting enabled=0 in /etc/yum.repos.d/livna.repo, and have been able to update with Yum.KPackageKit fails on me now with the message "Failed to initialize backend. This may occur if other packaging tools are used simultaneously."Then it fails to finish, which causes me to reboot before I can use Yum successfully.Under Settings, I see no indication that it knows where the repositories are, and no way to add repos.
View 1 Replies View RelatedI need to initialize the ssh,httpd.vsftpd when the system is initialized, how can i do that?
View 6 Replies View RelatedThis is the error: Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message:
'E: Dynamic MMap ran out of room. Please increase the size of APT::Cache-Limit. Current value: 25165824. (man 5 apt.conf), E:Error occurred while processing libwpeditor-dev (NewFileVer1), E: Problem with MergeList /var/lib/apt/lists/de.archive.ubuntu.com_ubuntu_dists_karmic_universe _binary-amd64_Packages, E:The package lists or status file could not be parsed or opened.'
I have error in KPackageKit when i try to install anything or check for updates:
Failed to initialize packaging backend. This may occur if other packaging tools are being used simultaneously.
Details: There are unfinished transactions remaining. Please run yum-complete-transaction as root.
I don't know anything about other packaging tools - I think I don't using any. Yum works fine in terminal. Reinstall PackageKit and KPackageKit files doesn't helped me. I also try to rebuilt rpm db:
rm -f /var/lib/rpm/__db*
rpm -vv --rebuilddb
yum clean all
I'm using Fedora 12 x86_64.
From the GUI, software update gives the error "Failed to Initialize - Failed to initialize the packaging backend. This may occur if other packaging tools are being used simultaneously." In the more details, "There are unfinished transactions remaining.
I run a terminal, switch to root and do as it tells me. It returns saying that there are no unfinished transactions. I've run it several times with the same result. Then I run "yum clean all" and "yum upgrade." The upgrade processes runs and reports "there are unfinished transactions..." However, the upgrade process still completes. Basically it is now a severe annoyance, but the system does seem to upgrade. I just cannot figure out why there are somehow unfinished transactions that I cannot get rid of. I tried reinitializing the rpm database - no luck. How can I somehow reset yum?
There is no sound card listed in "lspci" and also I receive this error when I use dmesg command:
[15.012010] AC'97 0 does not respond - RESET
[15.012017] AC'97 0 access is not valid [0xffffffff], removing mixer.
[15.012024] Unable to initialize codec #0
I downloaded the latest version of DirectX and installed it through Wine. It seemed to work, but whenever I try to play Akane's new Death Note game, it says 'Failed to initialize DirectX Audio' and closes the window. How can I fix this problem? I need my fan service!
View 7 Replies View RelatedI have some experience using linux systems, but my recent Fedora 10 (x86_64) install is my first attempt at installing and maintaining my own. I installed it to a clean second hard drive in my computer (Vista and XP partitions were previously installed on the first drive).The install was a bit of a fight, anaconda seemed to dislike my graphics card (ATI HD2900) and I finally got this issue resolved by running the install with 'linux xdriver=vesa'. Once the install completed I had to run a repair install to get a functioning grub, and even that I had to manually fix during the boot process because grub mixed up the two hard drives.
In Fedora I cannot choose any widescreen resolutions. I think this is either related to my hacky install process or ATI driver incompatibilities. I followed the URL... guide to try to update the drivers and have run a full system update. Neither has resolved my problems, and now I am fresh out of ideas.
Is there some other driver update process I should try, or should I just reformat the drive and try again with crossed fingers and a clean Fedora install?As an infuriating side note, I helped a friend install from the same DVD after my install fearing he might have the same issues, but the installer seemed to do everything automatically (his install was also on a second drive with Vista on the first, but his video card is a newer model ATI card than mine).
My F12 is connected to a Xerox DC432 printer on the network. The problem I'm facing is that banner sheet cannot be disable. The configuration setting on Administration->Printing showed that banner is off by default. "/etc/cups/printers.conf" file also have "JobSheets none none". I had the same problem with F11. Is there any step I'm missing? It doesn't seem to be problem of the printer itself because I could do this on a Windows OS.
View 1 Replies View RelatedMy wireless gets randomly disabled in my Acer Timeline 3810 with F11. The time it can take is basically random, but most of the times it ends up happening. I get disconnected, and then in the network manager in gnome panel wireless network appears disables and in fact the option appears grayed out. The only thing I can do to get it back workinh is restart.
View 4 Replies View RelatedWhen I moved from Fedora 13 from Fedora 11, I thought the annoying application crashes that I had been having were gone for good. Random crashes - firefox, Thunderbird, Abrt, metacity and what have you with SIGSEGV errors. I'm beginning to believe that these are not down to Fedora or even the RAM (Have run Memtest, several times). I'm not sure if what I am seeing are signs of IRQ conflicts of some sort. Can someone, please have a look and give me some guidance on what to do? Should I reinstall with acpi=off ? noapic? Also, don't have a clue why the system complains of ECC being disabled? The RAM is non-ECC. I have posted some sections of the logs here with links to the full logs instead of making this a massive post.
Code:
EDAC MC: Ver: 2.1.0 Aug 27 2010
EDAC amd64_edac: Ver: 3.3.0 Aug 27 2010
EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
amd64_edac: probe of 0000:00:18.2 failed with error -22
Complete system spec, BIOS details etc.
Full dmesg log on a fresh install. No issues experienced with system installation.
After a recent upgrade to fedora 15 I am now trying gnome 3 and notice that my touchpad is disabled when gnome starts (works OK at the gdm, then stops after login). Worked find in gnome 2. Where do I look to see what the problem might be
View 3 Replies View Relatedim trying to install FC15x64 over PXE and have 2 PCs , one is ok and second hangs right after "Waiting for hardware to initialize" with mess on screen i made a video so you can see: [URL] this is lshw output on FC12 on problem PC: work.massa.in.ua/lshw.txt
View 10 Replies View Relatedcreate a VM here with virsh. I've managed to create the XML file and got it to work properly, however running it is the problem. These are the errors I get error: Failed to start domain Cent-OS, internal error process exited while connecting to monitor: open /dev/kvm: No such file or directory ,Could not initialize KVM, will disable KVM support qemu: could not open disk image /media/55D123D9E79ABF54/VM/Cent-OS-5.5.img: Permission denied
I've tried setting SElinux to permissive mode.
Fedora 14 X64
hypervisor qemu
XML:
[code]...
I have a problem in red Hat installation, I have windows 7 installed in my PC,I want to dualboot it with linux. whenever I try to boot linux from DVD, I have the following message after some time "waiting for hardware to initialize" and the installation stops.What would be the problem for this? I have the following system configuration ASUS P5B WIFI AP motherboard. core 2 duo E4500 processor 2Gigs of RAM Nvidia geforce 9400GT GFX card.
View 3 Replies View RelatedI recently purchased an Acer Aspire AS5517-5671 laptop [URL] Every time I try to install Fedora 12 it gets to the waiting for hardware to initialize then restarts. (using the F12 DVD) Ive tried both the default installation method and the basic video drive options
Ive successfully install OpenSuSe 11.2 on the laptop with little trouble however. So any idea if there is a work around, or is my laptop not compatible with F12?
The machine boots, graphics come up, login window shows up, but after login there is only the background window (and mouse). My .xsession looks like this:
[Code]....
I m trying to install fedora 15 on a computer I've just built (which is already running windows 7).
asrock h61m/u3s3 lga 1155 intel motherboard
intel i5-2500 processor
radeon HD 6850 graphics card
After selecting "install a new system or upgrade an existing system" the installation process completely halts at "waiting for hardware to initialize." I looked this up and tried various boot options which frankly, I don't know what exactly they do. Setting "nomodeset" changed nothing as did various others like "noefi". When "ignore_loglevel" was set, the progress went a little further past "waiting for hardware to initialize" stopping after this:
[15.106386] atl1c 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IQR 18
[15.106639] atl1c 0000:05:00.0: setting latency timer to 64
[15.139841] [drm] Initialized drm 1.1.0 20060810
From what I've gathered from looking this issue up for the past few days, it is probably a graphics card issue. However, I did remove my graphics card and tried using the input directly to the motherboard and had similar issues. I'm not sure what other information is relevant but I can try to relay as much as I can if it is needed.
I updated kernel and everything seemed ok, except HD-PVR is locking up and recording only two minutes of every show it records. So, I have gone back to my previous kernel, but it seems that X isn't starting:
Code:
(II) NVIDIA dlloader X Driver 195.36.31 Thu Jun 3 08:27:29 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[code]....
Fatal server error:no screens found I had done a yum install kmod-nvidia for the newer kernel. I am thinking I need to get the kmod for the current kernel again (2.6.32.12-115.fc12.x86_64 #1 SMP Fri Apr 30 19:46:25 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux), but am not sure how that is done?
Been happily be using FC12 for roughly 6 months.
I installed 2 image browser apps to view all my Photos.
After I rebooted the GDM login screen hung, unable to login to X.
So I changed runtime level 3.
The ATi driver that came with FC12 worked fine and the driver from AMD do not support my kernel. I don't do system updates.
Anyway to restore the original driver that was provided with the FC12 disc? Possibly corrupt.
