General :: Copying Permissions From One File To Another?
Nov 4, 2009
copying permissions from one file to another.I know that command for changing permission is "chmod", for example chmod 666 filename However, I have one file filename1 and by listing all contents of a directory with ls -al I can find out its permissions in form -rwwx and similar. Now I want to define exact same permissions to other file "filename2". How to use chmod command to accomplish this. Other way around would be to simply copy permissions from one file to another. Is there any command for this purpose?
View 3 Replies
ADVERTISEMENT
Feb 4, 2010
I ssh into a ubuntu box with username "ubuntu" and I can become root without entering a password via "sudo su". How can I scp files onto this box using the ubuntu@ username? It does not allow me to do so using root@. The error is:scp: /etc/: Permission denied.
View 2 Replies
View Related
Oct 30, 2010
I was told fedora is great operating system but all i run is into trouble, hours spend on searching for solutions and never get an easy answer as it is on Leopard or even windows 7.What's my problem. I installed a new dvd copy of fedora13, and now connected 2 USB hard drives that seem to connect fine, can access everything but if i try to copy files to one of the drives it says i don't have permissions, and the fields to change permissions access are blank.
View 1 Replies
View Related
May 22, 2010
I accidentally wiped my 120GB external hardrive clean ( it was at about 95% capacity ) and I was able to recover 111.80GB back using ddrescue and all of those files now sit in a Recovery.img file.
1 ) I know I have to mount this file... yet every time I try to mount it back on my external HD permissions jump down my neck, and to add to it when I try to give my user full permissions for that drive it never works and resets to how it was.
2 )I have tried copying to .img to my drive so I could jsut worry about it later and free up some local HD space yet I don't have those permissions as well...
View 9 Replies
View Related
Mar 1, 2011
Asuming I have two files, one large file and one small file, I want to write the smaller file to the large file without overwriting the remaining part of the larger file.
Both are binary files, and the large file can become very large, so I want to avoid copying the whole file, as that will take some time. Is there any standard Linux console utility to do this, or do I need to write it myself?
View 2 Replies
View Related
Aug 7, 2011
I've got two external drives that are using ext4 that for whatever reason, I just can't seem to write too. I've changed the permissions on the drives using chmod so the permissions are "drwxrwxrwx". I can even right click within the drive and click "Create New Folder" but then it tells me, "Error while copying to "sdc1". The destination is read-only." I thought the destination permissions were setup so anyone can read/write to the disk? I haven't been using linux that long and have only recently started to feel comfortable to move over all of my stuff to Fedora.
View 6 Replies
View Related
Mar 28, 2011
I do have an Ubuntu Headless server which is running Samba on it. My mp3 file collection resides on that server on is being share.
So far, no problems connecting to that drive and writing from my Windows box on that share. But if I use my main laptop, which runs Ubuntu Lucid and download an mp3 song from Amazon, the moment I move that to the share, I got permissions problems from the Windows machine. This is clearly a permission issue with group and others; the song is being created on the share without read and write permissions to others or the samba group I created.
My question is. How can I make this process simple or automatic, when moving songs to the share? I don't want to go there everytime and run ...
Code:
Which was basically how I reset or fixed the problem.
I've read about umask, but not sure if that applies here or not, because I'm not creating the file but moving it.
View 5 Replies
View Related
Jul 25, 2010
The current directory contains:A file called "original.txt" Many directories called "source_001", "source_002", "source_003" ... From the command line how do you copy "original.txt" to "source_001" and "source_002" and "source_003" ...
The total number of these source directories is unknown, it changes every week.
View 4 Replies
View Related
May 5, 2010
My samba-shares are mounted in fstab. Everything works fine except for one small issue: when copying files from the local PC to the share the files are copied but the timestamps and permissions of the files are not. Instead a message "operation not permitted" appears. 'root' on the client can copy files WITH timestamp etc, a normal user cannot.
Below the line in fstab on the client and smb.conf on the server.
View 3 Replies
View Related
Mar 7, 2011
Is it possible to copy a file on multiple remote machines through scp in one command?
View 3 Replies
View Related
May 6, 2010
I'm getting a video from a camera connected to the computer and saving it to a constantly increasing file.
The thing is that I'm trying to make a non-stop copy of this file over the network (i.e. using scp, rsync or something like that).
View 4 Replies
View Related
Nov 16, 2010
Solaris is the os used. I want to copy files from UNIX Machine to windows network drive.I know smbclient,ftp can be used. But is there any other best option i can use?
View 2 Replies
View Related
Jul 23, 2010
I am trying to copy four files from my machine, through a second machine, and finally to the destination. The destination computer can only be reached through the second computer, and I am curious to know if there is an easy way to do this. I am able to ssh to the middle machine and then ssh from there to the destination. I know that I could just copy from the first machine to the second, and then from there to the third. I guess that I'm curious to know what kind of command I can run to do this all at once or even if I could do such a thing (which I'm betting I can). I need to copy these files as root on the destination machine too.
View 6 Replies
View Related
Jun 17, 2010
I am quite confused about the following description on fork. Could you please explain it ?The child process shall have its own copy of the parent's file descriptors. Each of the child's file descriptors shall refer to the same open file description with the corresponding file descriptor of the parent.For example, I am opening a socket and then fork. Now, does the child have a separate socket or is shares it with the parent. Does I have any impact on using it in child?
View 2 Replies
View Related
Mar 13, 2011
I'm trying to resume copying from a mounted CIFS device to my local hdd with cURL. I tried
Code:
$ curl -C - -O file://myfile
and also
Code:
$ curl -C <manual offset> -O file://myfile
(looked up the manual offset using "$ wc -c")
This resumes copying if I cancel it eg with ^C.
But it does not work if I unmount and remount the CIFS device. cURL then ignores my given offset and continues again from start as if nothing were there without saying a word. With "-C -" the same effect.
View 2 Replies
View Related
Apr 6, 2010
I have an ntfs partition that I wish to access as a normal user(non-root). For this I did the following. As root I created a folder /windows and did a chmod 777 -R on /windows. Then I added the following line to /etc/fstab
Code:
/dev/sda3 /windows ntfs-3g defaults,nosuid,nodev,umask=000 1 0
Now, the partition is mounted alright but the problem is that when any other user (non-root) creates a files in /windows (say by executing touch newfile) the newly created file has the owner and group set as root. The non-root user can create the file and he can also delete the file, however, he cannot change the permissions of the file and also the owner:group is always set as root:root. How do I get across this problem, i.e. how do I mount a partition, so that a non-root user can also change the permissions and ownerships of the files he creates.
View 2 Replies
View Related
Jun 26, 2010
Create a copy of the file above and call it commands.sorted. Use the vi command to manually sort this file. I.e. use yy to copy a line, P or p to paste a line, and dd delete a line. Order the commands with the two lines starting with double quotes first. Then list the rest of the command in alphabetical order.
Anyone have any ideas what he's talking about? Can I copy a file and rename it at the same time while copying it to the same exact directory again? Now sure what the two lines things means either. I have an email out to him but it usually takes a long time for him to answer me. I got alot of work to do so everytime I get hung up it kills me.
View 2 Replies
View Related
Oct 16, 2010
Finally I managed to install my printer/scanner drivers.The last thing I need to do is to add the following two lines to 40-libsane.rules (which is a read only file):# Brother scanners ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes".How can I change permissions for this file or add these lines without changing permissions?
View 2 Replies
View Related
Jan 29, 2010
How can I unzip file/folder in a way that it sets permissions of my choice to the unzipped contents instead of setting them for root:root?
View 2 Replies
View Related
Sep 17, 2009
I am trying to automate ftp to transfer files from windows to Linux server automatically and my script looks like this .
@echo off
SET CUSTOM=/apps12i/oracle/KIRAN/apps/apps_st/appl/custom/12.0.0/reports/US
echo user oracle> ftpcmd.dat
[code]....
Any files we transfer through ftp from windows , their default permissions to be set 755 automatically . We are using Red Hat Enterprise Linux AS release 4 (Nahant Update 7) .
View 1 Replies
View Related
Jan 4, 2011
I had created a file under a directory & set the permissions through chmod command but when I create another file under this directory, I get the default permissions. Is this due to umask or can I set the file permissions through chmod under a directory.
View 5 Replies
View Related
Jun 14, 2010
I am having problems with scp during a backup operationI added a ps -ef before and after the scp operation used during the backup.The backup is a script to backup a Zimbra ServerI am including the code segment that I am having problems
Code:
# DRCP Section. To scp newly created archives to a remote system
if [ "$DRCP" = "yes" ]
[code]...
View 3 Replies
View Related
Nov 4, 2009
I'm using my Linux (SLES 10) server as a File Server at this point. I need to set File Permissions to nested folders differently to different groups. For example:
homesharedengineering* should be read only for groupA
homesharedengineeringadmin should be read & write for groupB Plus read only for groupA
homesharedengineeringautocad should be read & write for groupC Plus read only for groupA
I've been using Webmin and Putty to set permissions but Putty only allows me the Default Group, it won't allow me to set several groups on the same directory. Webmin seems to allow me to add multiple groups (Webmin --> Others --> File Manager --> Info & ACL tab will provide extended abilities) but when I add multiple groups, they don't seem to take effect? I'm wondering if my setup at the 'Share' level or at the hierarchy of my folder structure (unix based) needs to be set specifically?
View 1 Replies
View Related
Jun 3, 2010
When I try to copy PDF files from one folder to another folder, it give me this error: "Error while copying "2004-SNUG-Europe-paper_...log_DPI_with_SystemC.pdf". There was an error copying the file into /media/CCDCE66BDCE64F70/Backup Master/Heterogeneous_cosimulation/Documentation" "Error splicing file: Input/output error" What is the reason of this error and how can this be fixed?
View 9 Replies
View Related
Jun 29, 2010
I have a 7.2 GB file (VMWare virtual machine file) that I am trying to copy from its original location to the another folder OR to external hard drive...each time I try to do this, I always get the following error after the copying process reach 'exactly' 1.4 GB
Error reading from file input/output error
And I have to either Cancel or Skip
I've tried to split the files to smaller pieces but the idea didn't work as I still get the same error whenever I try to compress/ split or do any operation with this file. how I can copy this file?
View 2 Replies
View Related
Apr 5, 2011
I keep creating practice perl scripts in a linux directory using vi <filename> and need to chmod 751 <filename> before I can run it as I wish to. I'm sure there is a simple way to default my permissions or config them at creation, but I'm not familiar with it ayuda me por favor.
View 2 Replies
View Related
Jun 27, 2011
Let's say you have this structure:
+ directory
-- file1
-- file2
-- file3 -> /tmp/file3
file3 is a link to another file3 somewhere else on the system.
Now let's say I chmod 777 the directory and all contents inside it. Does my file3 in /tmp receive those permissions? Also, let's say we have the same situation but reversed.
/tmp/file3 -> /directory/file3
If I apply the permissions on the file being linked to, how does that effect the link?
View 2 Replies
View Related
Mar 29, 2010
Under debian i did this:
casey@t400:~/programs$ ls -l
-rw-rw-r-- 1 root root 2071 2010-03-28 05:15 urlgetter.cpp
Then
casey@t400:~/programs$ gedit urlgetter.cpp
and upon attempting to save the file, I get the error
"Could not save[...] You do not have the permissions necessary to save the file."
but I am a member of the group root:
casey@t400:~/programs$ cat /etc/group | grep root
root:x:0:casey
View 2 Replies
View Related
Sep 15, 2010
Is it possible to let users create the directory or files but only user "yat" can delete them.suppose other users are geller ross joe from group FH , who have privileges. whenever these users create file or dir , they should not able delete it.BottomLine: Group users should create file but should not be able to delete them.By the way using sgid bit didnt help .
View 14 Replies
View Related
Dec 17, 2010
Kernel 2.6.21.5, slackware 12.0 For a given app run by me as user john to be able to create a file in /foo1/foo2/, what do I need? (a) john to have write permissions in /foo1/? (b) john to have write permissions in /foo1/foo2/? (c) john to have write permissions in both /foo1/ and /foo1/foo2/? Any hint will be welcome. Note: No. It's not homework. KTorrent complains when trying to create the files being downloaded, saying 'permission denied'. But I think he is being run by another user. I can explain in a different thread.
View 3 Replies
View Related
